Aluminum Specification: Aluminum is a lightweight, silvery-white, and ductile metal known for its high corrosion resistance, excellent thermal and electrical conductivity, and versatility in various applications. It is commonly used in industries such as aerospace, construction, automotive, and packaging. Physical Properties: Density: Approximately 2.70 g/cm�³ Melting Point: 660.3�°C (1220.5�°F) Boiling Point: 2519�°C (4566�°F) Mechanical Properties: Tensile Strength: Varies with alloy, typically ranging from 70 to 700 MPa Yield Strength: Varies with alloy, typically ranging from 30 to 500 MPa Elongation at Break: Varies with alloy, typically from 1% to 30% Hardness: Varies with alloy, typically from 20 to 120 HB Chemical Composition: Pure aluminum is composed of 99.0% to 99.9% aluminum. Common alloying elements include copper, manganese, silicon, magnesium, and zinc. Thermal Properties: Thermal Conductivity: 205 W/m�·K (at 20�°C) Coefficient of Thermal Expansion: 23.1 x 10â?»â?¶ /K Electrical Properties: Electrical Conductivity: 37.7 x 10â?¶ S/m (at 20�°C) Corrosion Resistance: Excellent resistance to atmospheric corrosion due to the formation of a protective oxide layer. Good resistance to corrosion in marine environments and many industrial chemicals. Formability and Machinability: Highly ductile and can be easily formed into various shapes through processes like rolling, extruding, and drawing. Machinability varies with the alloy, with some aluminum alloys offering better machinability than others. Common Applications: Aerospace: Airplane fuselages, wings, and other structural components. Automotive: Engine components, wheels, and body panels. Construction: Window frames, roofing, and structural components. Packaging: Beverage cans, foil, and containers. Electrical: Conductors, wiring, and electronic components. Surface Treatment: Aluminum can be anodized, painted, or coated to enhance its surface properties and appearance. Recyclability: Aluminum is highly recyclable and retains its properties after recycling, making it a sustainable material choice. Standards and Grades: Common standards include ASTM B209 for aluminum sheet and plate, ASTM B221 for aluminum extruded bars, rods, wire, profiles, and tubes. Grades and tempers vary depending on the specific application and alloy composition.
We are the suppliers of Mobile Phones and Computer Accessories. wide range of products that enhance and complement mobile and computer devices. Such as: Mobile Accessories: Protective Gear: Phone cases (silicone, hard, wallet, rugged), screen protectors (tempered glass, plastic), and phone skins. Charging Solutions: Chargers (wired and wireless), power banks, charging cables (USB-C, Lightning, Micro-USB), and car chargers. Audio Accessories: Earphones, headphones, Bluetooth headsets, and portable speakers. Connectivity: Adapters, dongles, OTG (On-The-Go) devices, and Bluetooth receivers. Mounts and Stands: Car mounts, desktop stands, tripod mounts, and magnetic mounts. Storage Solutions: Memory cards, card readers, and USB drives. Other Accessories: Popsockets, stylus pens, phone grips, cleaning kits, selfie sticks, and smartwatches. Computer Accessories: Peripherals: Keyboards (wired, wireless, mechanical), mice (wired, wireless, gaming), and trackballs. Monitors and Displays: External monitors, screen protectors, and monitor stands. Storage Solutions: External hard drives, SSDs, USB flash drives, and NAS (Network Attached Storage). Networking: Wi-Fi routers, modems, network switches, and USB adapters. Cables and Adapters: HDMI cables, USB cables, VGA adapters, and multi-port USB hubs. Computer Components: RAM, SSDs, cooling fans, and power supplies. Office Supplies: Laptop stands, docking stations, computer bags, and ergonomic accessories like wrist rests and mouse pads
USB flash drive.
HP USB flash drive.
USB flash, memory cards.
Memory card.
Memory cards.
Wood charcoal bbq.
Product Description Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. It's the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double. For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality. Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct. Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process. â?? Technical Specifications Production (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Rotating Speed in r/min: 740 r/min Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm Crab Slewing Speed in r/min: 0.59 - 2.96 r/min Ground Rail External Diameter in mm: 5192 mm Total Height in mm: 4155 mm General Power in Kw: 4.17 Kw Net weight in Kg: Around 1600 Kg â??
Usb hub,usb hubs.
We are Manufacturer & Exporter of Wood Charcoal. The Wood charcoal as fuel energy. It made from wood. A hard, porous, highly carbonaceous product formed during the heating of wood without access (or with limited access) of air in furnaces and retorts (sometimes in campfires as well). Ayin Grade A Wood Charcoal i Wood Charcoal Details as Below. Burning Time: 5 - 7 hours, Moisture: 6-8 %, Fixed Carbon: 75-85%, Calorific Value: 6500 to 7000 Kcal/kg, Ash Content: 1.5-2 %, Volatile Matter: 12.5 to 30%, Sizes: 20mm to 100mm, 30mm to 200mm (based on your request) Shape: Lump / Briquettes / block, Foreign Matter: 1 % made with physical methods, 100% pure hardwood No Chemical contents, ph value :7-9 Our charcoal can be use for both open and closed fires. smokeless coal for domestic use. recommended room warmer& barbeque Shape: lump No traces of soil or other elements. Long life burning burn without any smoke or fume during the initial ignition and during burning duration.
We are Manufacturer & Exporter of Wood Charcoal. The Wood charcoal as fuel energy. It made from wood. A hard, porous, highly carbonaceous product formed during the heating of wood without access (or with limited access) of air in furnaces and retorts (sometimes in campfires as well). 100% Restaurant Grade Non-sparkling Wood Charcoal Wood Charcoal Details as Below. Burning Time: 5 - 7 hours, Moisture: 6-8 %, Fixed Carbon: 75-85%, Calorific Value: 6500 to 7000 Kcal/kg, Ash Content: 1.5-2 %, Volatile Matter: 12.5 to 30%, Sizes: 20mm to 100mm, 30mm to 200mm (based on your request) Shape: Lump / Briquettes / block, Foreign Matter: 1 % made with physical methods, 100% pure hardwood No Chemical contents, ph value :7-9 Our charcoal can be use for both open and closed fires. smokeless coal for domestic use. recommended room warmer& barbeque Shape: lump No traces of soil or other elements. Long life burning burn without any smoke or fume during the initial ignition and during burning duration.
BBQ Grade Non Sparling Wood Charcoal We are Manufacturer & Exporter of Wood Charcoal. The Wood charcoal as fuel energy. It made from wood. A hard, porous, highly carbonaceous product formed during the heating of wood without access (or with limited access) of air in furnaces and retorts (sometimes in campfires as well). 100% Restaurant Grade Non-sparkling Wood Charcoal Wood Charcoal Details as Below. Burning Time: 5 - 7 hours, Moisture: 6-8 %, Fixed Carbon: 75-85%, Calorific Value: 6500 to 7000 Kcal/kg, Ash Content: 1.5-2 %, Volatile Matter: 12.5 to 30%, Sizes: 20mm to 100mm, 30mm to 200mm (based on your request) Shape: Lump / Briquettes / block, Foreign Matter: 1 % made with physical methods, 100% pure hardwood No Chemical contents, ph value :7-9 Our charcoal can be use for both open and closed fires. smokeless coal for domestic use. recommended room warmer& barbeque Shape: lump No traces of soil or other elements. Long life burning burn without any smoke or fume during the initial ignition and during burning duration.
We are Manufacturer & Importer of Wood Charcoal. The Wood charcoal as fuel energy. It is made from wood. A hard, porous, highly carbonaceous product formed during the heating of wood without access (or with limited access) of air in furnaces and retorts (sometimes in campfires as well). AYIN Grade Wood Charcoal Wood Charcoal Details as Below. Burning Time: 5 - 7 hours, Moisture: 6-8 %, Fixed Carbon: 75-85%, Calorific Value: 6500 to 7000 Kcal/kg, Ash Content: 1.5-2 %, Volatile Matter: 12.5 to 30%, Sizes: 20mm to 100mm, 30mm to 200mm (based on your request) Shape: Lump / Briquettes / block, Foreign Matter: 1 % made with physical methods, 100% pure hardwood No Chemical contents, ph value :7-9 Our charcoal can be use for both open and closed fires. smokeless coal for domestic use. recommended room warmer& barbeque Shape: lump No traces of soil or other elements. Long life burning burn without any smoke or fume during the initial ignition and during burning duration.
Brand :- GARDENIA Type:- ACID CLEAN Packing :- Cartoon Size:- 5Ltr Pcs :- 4 General characteristics : ACID CLEANER is a clear, pale yellow, fuming liquid with a characteristic odour. It is a blend of inorganic acids and is suited for the removal of water hardness scale, cement buildup and cement stains from equipment. In use, its dissolving action is fast and thorough. The acid formulation dissolves scale and cement very quickly with the selective inhibitors protecting metal surfaces. Features : ACID CLEANER possesses â??controlled actionâ?? to control acid attack on metal surfaces yet dissolves rust, cement, deposits, hard water buildup, lime and scale. ACID CLEANER is easy to use. One step chemical action does the job. Brush on structures after dilution dip metal equipment, circulate in closed systems; the product is extremely versatile and multipurpose in nature. ACID CLEANER is economical. The concentrated formula can be diluted with water. Specifications : Appearance : Pale yellow fuming liquid pH : Highly acidic Packages : * 5 LTR CAN
Brand :- GARDENIA Type:- Mirroshine 24% Packing :- Cartoon Size:- 5Ltr Pcs :- 4 GENERAL CHARACTERISTICS : MIRRORSHINE is a faintly perfumed milky white emulsion with high solids content which on drying after application restores to a hard glossy surface. It can be maintained by wet cleaning or light duty buffing. FEATURES : MIRRORSHINE provides a colourless, shiny film on drying that does not discolour. Unique leveling qualities enable fast application and the finish is resistant to cleaning. MIRRORSHINE provides a cross linked acrylic sealer finish with excellent covering power and gives maximum wear resistance with high gloss. When laid on surfaces it provides a safe non-slip film that has excellent resistance to blackheel and scuff marks. SPECIFICATIONS : Appearance : Faintly perfumed milky white emulsion AREAS OF APPLICATION : MIRRORSHINE is suitable for various floor surfaces including terrazzo and PVC tiles, linoleum, rubber tiles and sealed surfaces of wood. METHOD OF APPLICATION AND DILUTION : MIRRORSHINE is to be used neat. The floor surface is to be thoroughly cleaned and stripped using â??FLOOR STRIPPERâ?? as indicated in â??FLOOR STRIPPERâ?? are removed and that the floor is dry before application of MIRRORSHINE The first coat of MIRRORSHINE shall be applied with clean mop or sponge taking care that no foaming occurs, in one direction. After complete drying another coat should be applied, in a direction, perpendicular to the initial coat. The number of coats can be determined depending in the shine required. But in general two or three coats would give desirable results. For routine maintenance wash the floor with water, dry and apply a single coat of MIRRORSHINE SAFETY PRECAUTIONS : KEEP OUT OF REACH OF CHILDREN MIRRORSHINE is generally safe on hands. However prolonged skin contact may cause minor irritation in persons whose skin is sensitive. In case of splashes onto eyes flood thoroughly with water. In case of ingestion give plenty of eater and seek medical attention. Customers are requested not to reuse empty containers and dispose them promptly.
TMI 60.1.1.200402 - DISK BALE PLUCKER Spinning Machinery Product Description Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. Itâ??s the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double. For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality. Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct. Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process. â?? Technical Specifications Production (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Rotating Speed in r/min: 740 r/min Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm Crab Slewing Speed in r/min: 0.59 - 2.96 r/min Ground Rail External Diameter in mm: 5192 mm Total Height in mm: 4155 mm General Power in Kw: 4.17 Kw Net weight in Kg: Around 1600 Kg
TMI 70.1.1.200403 - DISK BALE PLUCKER New Spinning Machinery Product Description Disk plucker is an important equipment in blowing-carding joint machinery. It is suitable for each kind of raw cotton, cotton content chemical fiber, middle and long chemical fiber. Generally two set's of plucker are put into production in parallel. Plucking beater goes down the interval and rotates with carriage to pluck cotton in sequence. Cotton is plucked & transported to the next machine via duct. It Consists of a Flexible pipe, Carriage frame, Outer wall, Beater wall, Beater, Rail, Inner wall & Ring. Technical Specifications Production Output (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Speed in r/min: 740 r/min Blade extension from grid in mm: 2.5 - 7.5 mm Rail Diameter in mm: 5132 mm Total Height in mm: 3864 mm Power in Kw: 4.1 Kw Weight in Kg: Around 1600 Kg
Mobile Phones New And Used, Mobile Accessories, Laptops, Airpods, Computers, Printers, Inks And Toners, Mobile Accessories, Computer Parts, It Equipment, Cameras, Game & Consoles, Used Grade A Laptops, Server Cpu, Ssd, Memory.
Ups, laptops, desktops, servers, storage, switches, workstations, access control & time attendance systems, label printing for both paper based or vinyl based, ip telephone, avaya, smart tv, access panel, ceiling suspension, ceiling tiles, partitions, aluminium angle, clip in, aluminium, scaffolding, calcium silicate board, adjustable clip, aluminium shadow gap angle, aluminium tiles, cement board, ceiling anchor bolts.
