ROLLFOAM Roll Foam Packing Machine Min. Exit diameter : 550 mm Max. Roll diameter : 1600 mm Max. Roll width : 2300 mm Min. Roll width : 1400 mm Plastic thickness 30-160 micron (PE, LDPE) Adjustable exit diameter Up to 75% volume decrease Adjustable plastic amount and number of sealing Double line uniform heat distribution sealing system Double side synchronized mechanical conveyor tightening mechanism Hydraulic compression unit closure system Advanced recipe registration for different products : up to 100 working modes
BFP-100 is a full automatic foam block compression and mattress packaging machine. It increases the manufacturing capabilities by reducing the required warehouse. Thanks to BFP-100, 4 times more buns, foam layers, rails can be shipped or stored with the same volume Increased shipping capability by reducing the volume down to 25% Minimized distortion on the foam by having flat pack only Increased storage and manufacturing capabilities Capable of packing buns of foam or large stacks of foam sheets Maximum product protection with advance compression control system Hydraulic compression system at infeed and outfeed sections Upper and lower conveyor at the pressing units to move the product under compression Less plastic consumption and tighter packs thanks to infeed compression system Moving infeed part of the machine with hydraulic cylinder to bring the compressed product to the outfeed section Double sealing lines for all sealers The highest consistency of sealing thanks to upper and lower heating system for all sealers Unique heat transfer system throughout the whole length of the sealing wires Advanced heat control system for the sealers Automatically adjusted sealer height according to compressed product height Advanced data collection and remote troubleshooting with OMRON Controllers (EtherCAT) Adjustable timings for each sealing process for perfect seal with respect to different thickness of tilm and compression amount Ability to give multiple foam pieces such as foam rails, layers, etc. Motorized hoist for easy plastic change.
ET-ROLL-110 is a roll pack machine without compression unit. Although it does not have a compression unit, it can easily roll most of your light to medium mattresses, toppers, pet beds and wedges. Ability to roll foam, latex and memory foam mattresses Hydraulic exit system Adjustable diameter for the exit roll Additional sealing for stronger rolls Additional plastic film reserves Full automatic process Ability to work with or without additional plastic film Simple user-friendly touchscreen menu
Leon-vr double border serging machine The leon-vr is a high speed double border serger with right and left heavy duty pegasus overlock heads. With the versatile structure it is able to work from 5 cm to 50 cm wide borders. Leon-vr can be stand alone serging machine or it may be coupled with border mark and cut station, border tack and jump machine, handle attaching machine, etc. Servo motor driven puller system Robust pegasus sewing heads Yardage counter Independent sewing drives: no mechanical transmission Touchscreen controller Optional over/under double border serger with juki heads leon-vr-l
HEMMER Automatic Panel Hemming Machine One of the most time consuming part of mattress production is flanging the quilted panel. With the higher demand on thicker mattress panels, overlocking of the panels became inevitable, because it becomes impossible to sew the thick panel by the tape edging. However, the conventional flanging process brings a lot of labor and inaccurate end sizes of the panel. Full automatic process Two Working Modes: Synchronized with your existing quilting machine Feeding the roll of quilt Side and Length Cutting and Sewing 4 needle double chain-stitch heavy duty sewing unit (right and left sew ing head) 4 needle double chain-stitch heavy duty sewing unit (cross sewing head) Adjustable width and length of the quilt Adjustable distance between left and right head with motor Wide range of quilt thicknesses Material exit with conveyor Automatic thread cutting Accurate finishe measures of the quilts Automatic side-waste removal system to the reserve High safety systems Servo driven system User-friendly software Easy tape edging of the quilt after closing Online maintenance and training service One HEMMER has the capacity of 5 flangers. There is no panel cutter needed The finish size of panel after flanging may end up with high tolerances while it is always accurate with the HEMMER Ability to use as panel cutter only Unlike conventional panel cutters; with the new HEMMER, there is no possibility of skipped stitches at the cutting edge, since the hemming is before the cutting Your tape edging is more fluffy with the HEMMER. The overlocking completely closes the edge of the material while hemming keeps your panel edge open to make the tape fluffy Ability to adapt the HEMMER with any existing multineedle quilter. High quality chainstitch sewing heads Max. Speed: 20-22 seconds per panel (may change according to the filling) Max. Material thickness: 7.5 cm (may change according to the compressibility of the material) Number of sewing heads: 3 Max. Quilt width: 2.50 m Min. Quilt width: 1.40 m Min. Quilt length: 75 cm Automatic thread cutting Automatic side waste removal system Full automatic process with 4 sides cutting and hemming 4 needle chain-stitch sewing head for the transversal cutting and sewing Ability to adapt any multineedle quilter Ability to work with pre-quilted material Ability to set up timing of the looper-needle adjustment without any mechanical setting Reliable OMRON Sysmac Controller Ability to use as panel cutter only Durable FESTO pneumatic system with low air consumption Product video link : https://www.youtube.com/watch?v=aD9dB_5UONA Product video link : https://www.youtube.com/watch?v=KaPEo4Dl2U4
HYDRA Double Head Double Roll Feeding Continuous Quilting Machine HYDRA is a full automatic double feeding system, high speed double heads quilting machine for upholstery, mattress and home textile industries. It performs the whole operations of feeding with motorized rollers, quilting and cutting the quilt in length. The double feeding system offers quilting two rolls at the same time while offering motorized width adjustment for single feeding mode with the exchange time of 20 seconds. The double feeding system is very useful for high capacity sofa production as well as mattress headboards. It doubles the production of sofa and headboards by quilting two rolls at the same time. On the other hand, changing the mode of feeding to single roll makes you able to quilt high end luxury mattresses as well as wide home textile products. Full automatic feeding, tensioning, quilting and cutting Minimum bobbin change with XXL spools (Durkopp Adler) Automatic thread cutting in less than 0,5 second Operation modes : symmetric ( Mirror like ) , parallel, single needle Standard length & sides cutters High operator security systems Brushless servo motors Automatic fabric measure control system with great accuracy Remote & Smartphone production monitoring system Electronic position controlled fabric with adjustment Transition between single to double roll feeding system in a minute Flexible and user friendly software
Plastic profile extrusion, PVC moulds.Manufacturing
Aluminum profiles and alumium billets.Fabrication
Epdm Gaskets, Interior Wooden Door Handles, Interior Wooden Doors, Interior Composite Doors, Various Upvc Windows And Doors Accessories, Various Aluminium Windows And Doors Accessories, Upvc Profile Processing Machines, Spacer For Double Glass, Pressmachine For Produce Double Glass, Door Panel, Sandwich Panel.
Specification of products Venezia Climate Class C 4 Operating Temperature DEG C -18/-22 Voltage / Frequency 220V/50Hz Type of Refrigerant A r134a/r404 Cooling System Air Blown Compressor number 2 Compressor Glue Compressor Power 1126W +1126 W External Dimensions (W * D * H) mm 1220 * 1245 * 1370 Insulation Density kg/m3 38 ~ 40 Defrost Automatic Defrost type Hot gas + Resistance Gross Weight kg 450 Tray Capacity lt 12x5
Specification of products Portofino Climate Class C 4 Operating Temperature DEG C -18/-22 Voltage / Frequency 220V/50Hz Type of Refrigerant A r134a/r404 Cooling System Air Blown Compressor number 2 Compressor Glue Compressor Power 1126W +1126 W External Dimensions (W * D * H) mm 1220 * 1245 * 1370 Insulation Density kg/m3 38 ~ 40 Defrost Automatic Defrost type Hot gas + Resistance Gross Weight kg 450 Tray Capacity lt 12x5
Specification of products Firenze Climate Class C 4 Operating Temperature DEG C -18/-22 Voltage / Frequency 220V/50Hz Type of Refrigerant A r134a/r404 Cooling System Air Blown Compressor number 2 Compressor Glue Compressor Power 1126W +1126 W External Dimensions (W * D * H) mm 1220 * 1245 * 1370 Insulation Density kg/m3 38 ~ 40 Defrost Automatic Defrost type Hot gas + Resistance Gross Weight kg 450 Tray Capacity lt 12x5
Gold-silver ball & form machine 2005 tecq.Goldsmith machine.ªts work by gold , silver, platine tup's.Daily 3 000 grm.Ball or any kind of jwell.Form...+making conick tups..Etc, etc 175 kg. 160*40*120
Trigger head for sofa and carpet washing machine suitable for all brands
CNC Styrofoam Cutting Machine is used in the production of products such as jambs, panels, crown, floor molding, applique keystone used for insulation and decoration on exterior facades.
%100 Polypropylene 42 Reeds Machines min : 1.6 kg - max : 3.2 kg per sqm carpet Shrink, fringle
FELIS Single Needle Frame Type Mattress Quilting Machine FELIS is a frame by frame single needle computerized quilting machine. It has a moving sewing head and moving frame in order to accelerate the movements by reducing the weight of moving parts. With the advantage of the moving sewing head, FELIS also brings 50% space requirement advantage compared to conventional frame by frame quilting machines. It needs half the space of a conventional fixed head quilter. With the ability of quilting very different products, FELIS offers perfect quilting quality for all the products from very thin garment products to thick materials for mattress industry with multiple layers including foam, visco, memory foam, latex, polyester fiber, non woven, jacquard fabric, knitted fabric, leather and down fill. Minimum bobbin change with XXL spools (Durkopp Adler) Automatic thread cutting in less than 0,5 second High operator security systems Automatic frame measure control system Remote & Smartphone production monitoring system Easy pattern adaptation Flexible and user friendly software : EtQuilt
ET-FL-120 - Heavy Mattress Panel Flanging Machine Heavy Duty Pegasus Sewing HeadMax. Thickness: 9 cmCut material vacuum removal systemAbility to sew the non-wowenWider knife with saw teeth for heavy materialStrengthened Presser Foot Mechanism
PSM-C Pillow and Cover Mattress Packing Machine Strong vacuum pack with double sealing system Uniform sealing quality all over the sealing line Highest durability of resistances thanks to advance tensioning mechanisms and contant temperature distribution Significant volume advantage thanks to high pressure capacity Ability to work for almost all bulky textile products High durability and balanced pressure mechanism thanks to 4 bar presser plate leveling system Alignment Mechanism for the Press Adjustable pressing and sealing time Rack and Pinion Alignment System Cold Sealing System CE Certificate
FULLPACK-X is a full automatic mattress, headboard and base wrapping machine. With the versatile design, it offers packaging of different products without touching any adjustments. Thanks to patent pending advanced streamlining film distribution technology, the plastic film waste is reduced even for non compressible wood products. The smooth design brings the comfort while packing with cartoon corners and packing the light products. The dimension versatility makes you able to wrap very different sizes without any adjustment. Up to 3 wraps per minute Self-Adjustment for different sizes of mattresses with auto length-width-height measuring system Thanks to its high flexibility for different sizes, it allows to pack very different products without changing adjustments Ability to feed the product as vertical or horizontal according to your need. Automatic side compression for fully tight, secure film wrapped mattresses No wiring and seal problems thanks to energy saver cold sealing technology Automatic side film trimmers Automatic side waste plastic removal system Standard double sealing system Automatic side compression system for tight wraps Unuqie plastic tightening system for the products which are not compressible Servo driven motion system Max. Product Size: 220 cm x 220 cm Min. Product Size: 100 cm x 100 cm Easy adaptation to your existing line and ERP system Optional barcode printing system Online maintenance and training system
