Agricultural plastic products, sapling vaccine band, sapling tying rope, net collection apparatus.Trade , manufacturer and exporter
Trigger head for sofa and carpet washing machine suitable for all brands
a. Price of product - depends on customers product b. Product origin - Turkey c. Key Specifications/Special Features d. Minimum Order Size : 1 full Truck or 1 full container e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.
a. Price of product - depends on customers product b. Product origin - Turkey c. Key Specifications/Special Features d. Minimum Order Size : 1 full Truck or 1 full container e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.
a. Price of product - depends on customers product b. Product origin - Turkey c. Key Specifications/Special Features d. Minimum Order Size : 1 full Truck or 1 full container e. Packaging Details: Euro pallets- Wooden boxes or other customer-specific packaging details.
EASYPACK Mattress Packing Machine Adjustable pneumatic press system No wiring and seal problems thanks to energy saver cold sealing technology Standard double sealing system Ability to pack mattresses with side cardboards
ROLLFOAM Roll Foam Packing Machine Min. Exit diameter : 550 mm Max. Roll diameter : 1600 mm Max. Roll width : 2300 mm Min. Roll width : 1400 mm Plastic thickness 30-160 micron (PE, LDPE) Adjustable exit diameter Up to 75% volume decrease Adjustable plastic amount and number of sealing Double line uniform heat distribution sealing system Double side synchronized mechanical conveyor tightening mechanism Hydraulic compression unit closure system Advanced recipe registration for different products : up to 100 working modes
BFP-100 is a full automatic foam block compression and mattress packaging machine. It increases the manufacturing capabilities by reducing the required warehouse. Thanks to BFP-100, 4 times more buns, foam layers, rails can be shipped or stored with the same volume Increased shipping capability by reducing the volume down to 25% Minimized distortion on the foam by having flat pack only Increased storage and manufacturing capabilities Capable of packing buns of foam or large stacks of foam sheets Maximum product protection with advance compression control system Hydraulic compression system at infeed and outfeed sections Upper and lower conveyor at the pressing units to move the product under compression Less plastic consumption and tighter packs thanks to infeed compression system Moving infeed part of the machine with hydraulic cylinder to bring the compressed product to the outfeed section Double sealing lines for all sealers The highest consistency of sealing thanks to upper and lower heating system for all sealers Unique heat transfer system throughout the whole length of the sealing wires Advanced heat control system for the sealers Automatically adjusted sealer height according to compressed product height Advanced data collection and remote troubleshooting with OMRON Controllers (EtherCAT) Adjustable timings for each sealing process for perfect seal with respect to different thickness of tilm and compression amount Ability to give multiple foam pieces such as foam rails, layers, etc. Motorized hoist for easy plastic change.
ET-ROLL-110 is a roll pack machine without compression unit. Although it does not have a compression unit, it can easily roll most of your light to medium mattresses, toppers, pet beds and wedges. Ability to roll foam, latex and memory foam mattresses Hydraulic exit system Adjustable diameter for the exit roll Additional sealing for stronger rolls Additional plastic film reserves Full automatic process Ability to work with or without additional plastic film Simple user-friendly touchscreen menu
Leon-vr double border serging machine The leon-vr is a high speed double border serger with right and left heavy duty pegasus overlock heads. With the versatile structure it is able to work from 5 cm to 50 cm wide borders. Leon-vr can be stand alone serging machine or it may be coupled with border mark and cut station, border tack and jump machine, handle attaching machine, etc. Servo motor driven puller system Robust pegasus sewing heads Yardage counter Independent sewing drives: no mechanical transmission Touchscreen controller Optional over/under double border serger with juki heads leon-vr-l
HEMMER Automatic Panel Hemming Machine One of the most time consuming part of mattress production is flanging the quilted panel. With the higher demand on thicker mattress panels, overlocking of the panels became inevitable, because it becomes impossible to sew the thick panel by the tape edging. However, the conventional flanging process brings a lot of labor and inaccurate end sizes of the panel. Full automatic process Two Working Modes: Synchronized with your existing quilting machine Feeding the roll of quilt Side and Length Cutting and Sewing 4 needle double chain-stitch heavy duty sewing unit (right and left sew ing head) 4 needle double chain-stitch heavy duty sewing unit (cross sewing head) Adjustable width and length of the quilt Adjustable distance between left and right head with motor Wide range of quilt thicknesses Material exit with conveyor Automatic thread cutting Accurate finishe measures of the quilts Automatic side-waste removal system to the reserve High safety systems Servo driven system User-friendly software Easy tape edging of the quilt after closing Online maintenance and training service One HEMMER has the capacity of 5 flangers. There is no panel cutter needed The finish size of panel after flanging may end up with high tolerances while it is always accurate with the HEMMER Ability to use as panel cutter only Unlike conventional panel cutters; with the new HEMMER, there is no possibility of skipped stitches at the cutting edge, since the hemming is before the cutting Your tape edging is more fluffy with the HEMMER. The overlocking completely closes the edge of the material while hemming keeps your panel edge open to make the tape fluffy Ability to adapt the HEMMER with any existing multineedle quilter. High quality chainstitch sewing heads Max. Speed: 20-22 seconds per panel (may change according to the filling) Max. Material thickness: 7.5 cm (may change according to the compressibility of the material) Number of sewing heads: 3 Max. Quilt width: 2.50 m Min. Quilt width: 1.40 m Min. Quilt length: 75 cm Automatic thread cutting Automatic side waste removal system Full automatic process with 4 sides cutting and hemming 4 needle chain-stitch sewing head for the transversal cutting and sewing Ability to adapt any multineedle quilter Ability to work with pre-quilted material Ability to set up timing of the looper-needle adjustment without any mechanical setting Reliable OMRON Sysmac Controller Ability to use as panel cutter only Durable FESTO pneumatic system with low air consumption Product video link : https://www.youtube.com/watch?v=aD9dB_5UONA Product video link : https://www.youtube.com/watch?v=KaPEo4Dl2U4
HYDRA Double Head Double Roll Feeding Continuous Quilting Machine HYDRA is a full automatic double feeding system, high speed double heads quilting machine for upholstery, mattress and home textile industries. It performs the whole operations of feeding with motorized rollers, quilting and cutting the quilt in length. The double feeding system offers quilting two rolls at the same time while offering motorized width adjustment for single feeding mode with the exchange time of 20 seconds. The double feeding system is very useful for high capacity sofa production as well as mattress headboards. It doubles the production of sofa and headboards by quilting two rolls at the same time. On the other hand, changing the mode of feeding to single roll makes you able to quilt high end luxury mattresses as well as wide home textile products. Full automatic feeding, tensioning, quilting and cutting Minimum bobbin change with XXL spools (Durkopp Adler) Automatic thread cutting in less than 0,5 second Operation modes : symmetric ( Mirror like ) , parallel, single needle Standard length & sides cutters High operator security systems Brushless servo motors Automatic fabric measure control system with great accuracy Remote & Smartphone production monitoring system Electronic position controlled fabric with adjustment Transition between single to double roll feeding system in a minute Flexible and user friendly software
Casted and machined parts, welded and machined parts.
Max.swing over bed:440mm Max.turning diameter:200mm Max.turning lengh:215mm Spindle speed range:45~4000rpm. Number of tool station: 8 Turret indexing time: 0.3sec Machine design: 20° deg Max stroke X-axis:120 mm Max stroke Z-axis: 225 mm Slide way type: Square way Spindle motor: 5.5 kw Controller: Fanuc/Mitsubishi. Max.swing over bed mm 440 Max.turning diameter mm 200 Max.turning lengh mm 215 Material collect length mm 100 Spindle max.bar capacity mm 42 Spindle bore diameter mm 55.5 Spindle nose A2-5 Spindle speed range Rpm 45~4000 Spindle motor Kw 5.5(7.5) Number of tool station 8 Max.stroke X-axis mm 120 Max.stroke Z-axis mm 225 Rapid traverse X -axis m/min 12(16) Rapid traverse Z- axis m/min 12(16) Turret indexing time Sec 0.3 Machine design deg 20° Slide way type Square Guide way Spindle hydraulic chuck inch 6" Turning tool diameter mm 20 Boring tool diameter mm 25 Hydraulic motor kw 0.75 Lubrication motor w 3.5 Power requirement Kva 15 Coolant tank capacity L 100L Machine dimensions(L*W*H) mm 2255*1800*1800 Weight kg 2235.
Transport chains
Concrete Batching Plant And Spare Parts Concrete Pump Spare Parts Truck-mixer Spare Parts Tower Crane Spare Parts Used Concrete Machinery And Tower Cranes
Using as a alternative spare part for relevant machine. As Razor Spare Parts, we provide our business partners and buyers in the best way by offering many back services besides production. Our products can used easily for relevant machines and easy to operate. High guality production and with using life, Razor Spare Parts products separate other firm and companies. With the first-class productions of our target products in the spare part area, we offer services with the highest quality products as well as our competitors for atlas copco, furukawa and ingersoll rand spare parts We have services for part and the whole product. We are taking strong steps to strengthen our position in the industry and to be in the international market by offering service and solution suggestions to our customers and business partners for many products, especially atlas coppo, in hydraulic breakers and rock drilling equipment. Pulley_whell_3128078430, Pulley_whell_3128078430_TR, Pulley_whell_3128078430_turkey, Pulley_whell_3128078430_epiroc, Pulley_whell_3128078430_atlascopco, Pulley_whell_3128078430_atlas_copco, 3128078430, 3128078430_epiroc, 3128078430_atlas_copco, 3128078430_TR, 3128078430_turkey, 3128078430_best_price, 3128078430_high_quality, 3128078430_mining_machine, 3128078430_spare_part, 3128078430_drilling_part, 3128078430_razor_spare_parts, 3128078430_razorsparepart, 3128078430_atlascopco, drilling_blasting, epiroc_spare_parts atlas_copco_spare_parts mining_machine_spare_parts drilling_equipment hydraulic_drill_spare_parts , razor_spare_parts
Properties 1- Ball linear guideway 2- Ball screw drive system 3- Precision aluminium construction body module system 4- 3 axis motor drive 5- The aluminium table system with t-slot 6- The optional X, Y, Z cutting area Working area X axis (minimum): 1500 mm X axis (maximum): 2000 mm Y axis (minimum): 1000 mm Y axis (maximum): 1500 mm Z axis (minimum): 250 mm Z axis (maximum): 400 mm
Drilling and cutting process on the part of the same job Auto tool cooler and oil system. Industrial CNC control 15 Touch screen Panel Lineer sliding bridge and Helix Rocks Propulsion System. Drilling capacity : Min. M5 Max. M32 (HSS,UDRILL) Drilling Depth : 100 mm. Max. Drilling tool speed : 70-110 m/min. Drilling speed : 0.15-0.35 mm/rev. Spindell speed : 1500 RPM Max. CNC Positioning Accuracy : 0,02 mm. Max. (X&Y) Positioning speed : 15000 mm./min. Bridge movement control : Dual Gantry AC Servo Drives.
Cast- iron base Touch screen and CNC - Software system Automatic CNC - Boring system special for POLEKS. X-Y-Z Axis AC SERVO Motor Control Electronic Hand Wheel for X-Y-Z axis.(Speed Adjustable) Movable Boring head changer robot Transmission Head Up and Down movements with speed adjustable Electronic speed adjustable spindle rotation motor(Elc.Hand Wheel Control) Movable control panel with Touch Screen Speed adjustable table for surfacing process(AC Servo Control) Movable work lighting lamp Prepared system chip breakers (cutting tools) Column curtain for secure the slides Column â??Vâ?? type slide system Table slides â??Linear Guides â?? with automatic lubrication system(X,Y axis) Electric panel inside lighting lamp Boring head with marble system Transmission down and up movements with ball screw and automatic lubrication. Ball screw system for table forward and backward with automatic lubrication. Ball Screw automatic lubrication system Touch Screen on Control Panel Time setting Automatic Lubrication System for all slides and ball screws. Electronic hand wheel control and movements for X,Y,Z axis. 4 Tons table weight load capacity Ethernet and Remote connection system for software update. Easy programming and automatic boring process Speed adjustable surface milling process for Incremental electronic measuring device for (X,Y,Z axis)
