Rubber and tyre products The special orders are accepted under the availability of technical drawings Rubber and tyre products The special orders are accepted under the availability of technical drawings
Elastomeric bearings consisting of a solid block of vulcanised elastomer without internal cavities are called plain pads. Plain pads are economical efficient support for precast and pre-stressed concrete or steel beams in bridges and buildings. These pads are designed according to required standards and shear modulus of the manufactured elastomer may vary between 0.6-1.35 MPa to meet the customers need.
We can supply pcu and reprocessed synthetic rubber(SBR, BR, IR, etc.). Please get in touch with us for more information and availability. Mustafa Tolgay
The Ozdekan EXpansion Joints are waterproof expansion joints that allow absorption of the deck movements. These joints are manufactured with rubber elements and restrained to the structure with proper anchor bolts. The reinforcing metal profiles made of steel are completely inserted and vulcanized to the rubber. This process is a total guarantee against corrosion and allows a longer life to the product. The rubber compound, too, has been intentionally formulated to resist the oil, grease, petrol, salt and sand, without besides, suffering premature ageing phenomena due to sun rays, salt and snow. All the joints follow the deformations and movements of the structure (the movement can exist with every skew angle from 0° to 90°) by shear deformation of the rubber elements. Anchor bolts, made of steel and protected with anticorrosion treatments, absorb the elastic reactions and all the other kind of mechanical solicitations. The joints are also able to compensate height difference or vertical movements. This characteristic is very important in all the cases where load and movement conditions can cause relative vertical movements. The joint series is manufactured by Ozdekan since 2006. Main advantages: Simple and linear design with few elements Low height of the profile Total impermeable Easy assembling eitheron concrete structure Suitable for the replacement of existing joint Easy and quick to be replaced Good resistance to vehicles sliding Vertical movements absorption The joints are supplied in variable length elements depending to the joint type. A joint line consists in fact of many units joined together with a groove-and-tongue junction welded with special glue. The joint fixing is obtained by chemical anchors; the nuts are locked using a dynamometric key so that permanent compression strength is given to the joint. Stainless steel anchors may be provided on request. In that way the horizontal forces, due to breaking of vehicles and to the reaction that rubber opposes to the joint deformations (shrinkage, creep, thermal variations etc.), are transmitted by friction between the rubber and the concrete. The joints can be assembled on a metallic infrastructure. The joints of bigger movements with four upper grooves are manufactured in order to prevent the lifting of the elements during the contraction. These devices guarantee the adhesion of the elements to the structure and the noiseless of the traffic.
Bromobutyl and Butyl Rubber Possible With Lc payment terms...
high quality and affordable rubber granule
Quality rubber powder and affordable price
Our monthly producing capacity is 200 tons of Epdm Rubber and seals. We supply EPDM, NBR , SBR, NR, TPE, Sponge and Solid profiles,Gaskets, aluminum gasket,O-Rings,V-Profieles,Uprofieles, U wick gasket, hatch Cover Gaskets over 3000 products to more than 20 countries.
Extremely elastic, ductile and compressible Good corrosion behaviour and high absorbency Heat resistance up to 80° c Low temperature resistance up to -40°c Resistant to uv-ozone and lubricants Elongation at break: 350 -600 %, depending on sponge type Tensile strength: 10 - 60 n/cm², depending on sponge type Environment friendly. Variable
50cmx50cm 20mm 100cmx50cm 20mm , Wear-Resistant, Non-Slip, Anti-Static and Soundproof
Waterproof, Wear-Resistant, Non-Slip, Anti-Static, and Soundproof rubber tiles are designed to keep children and everyone safe. 40X40 cm x 20 mm black, red, green 9.25 /Euro / m2 50X 50 X 2 black, red, green 9.25 /Euro / m2 100 X 100 X 2 black, red, green 12.40 / Euro / m2
Wholesale Colorless Rubber Crumb Polyurethane Adhesive glue Waterproof Rubber Binder, Mix with EPDM or SBR rubber granules, to install running track, playground, sport courts, jogging track, park, etc. 20kg/bucket, 960kg/pallet, 19.2ton/20ft container 200kg/drum, 16ton/20ft container
UNVULCANIZED/UNCURED SBR+NR RUBBER COMPOUND
TSR 10 (NATURAL RUBBER)
Material : Rubber and EPDM granule Color : Black, yellow, green, gray, blue, purple, etc. Thickness: 15/20/ 25/ 30/40/45/50mm Specification : 500mm*500mm, 1000mm*1000mm Package : In pallet Surface treatment : compact Service life: More than 15 years Flame retardant: Bf1-S1 Acoustic performance : 12dB Anti resistive >10 Chemical resistance qualified Dimensional stability : 0.05% Residual depression degree : 0.08mm Skid resistance: R9 group Degree of fading : >= 3 rating Abrasion resistance : T group Resistance performance : -0.05mm The national material testing : qualified
We are delivering a high quality range of Nylon Friction Scraps to our esteemed consumers. These are widely used in numerous sectors. Our products are widely admired for their quality and durability.
Rubber made cow horse mattress Standard sizes Rubber and tyre products The special orders are accepted under the availability of technical drawings
EKASWELL SB850, Thermoplastic Elastomer (TPE) based hydrophilic particles with high swelling and long cycle capacity. Application areas: Indoor and outdoor places. Pools, water tanks, treatment plants. In basic-curtain combinations. Pipe inlet and outlet. Construction joints in cable ducts. In tunnel segments. In the joints of old and new concrete. Used in construction joints. Advantages: Easy application. Flexible. Controlled swelling does not inflate suddenly in concrete casting and does not damage concrete. It is resistant to high salt concentration and various chemicals, There is no disintegration and. The cycle capacity is high. Technical Features: Ekaswell SB850: Calculated at 23 C. Expansion rate: %850. Elongation at break: %490/770. Tensile strength: 1.2/2.2 Mpa. Color: Beige, Blue, Red, Yellow, Green (can be produced in all colors). Density: 1,25 g/cm3. Hardness: 40. Application temperatures: -30C / 70C.
Nbr Latex Rubber 20 MT NBR LATEX QD-7 RUBBER (IN LAEKS SHAPE) High quality NBR latex raw material 10 Containers (net: 200.970 kg) 20 MT.NBR LATEX QD-7 RUBBER (IN LATEX FORM) QTY OF CONTAINER: 5 CONTAINER NET WEIGHT: 100.350 KG Total : 301.320kg Appearance Milk white Type QD-701 Appearance Milk white Solid content 43.5-46% PH value Min 8.0 Adhesion Max 260 Mechanical stability Max 0.1 Application Gloves Quality Stable Nbr Latex Rubber High quality $450 Big discount low price LOI: We do not give prices without sending a letter of intent Analysis Report product available Location: ISTANBUL -TURKEY Port: ISTANBUL Port Example: Available. Sample Cost According to Buyer The products are ready for delivery in our warehouse. If you wish, you can come and see our products. Target Price: If you have a target price, please let us know. Please contact us to get quick response and proceed with your order. If you don't like our product, we can refund your money. DELIVERY: The day after receipt of the confirmed order and valid acceptance for the seller and the buyer. Payment Terms: LC Or Negotiable Shipping Terms: FOB Shipping is the responsibility of the buyer
Nitrile Butadiene Rubber (NBR) LATEX Model Number: QD-701 NBR LATEX QD7 RUBBER (IN LATEX) Total : 301.320kg in total 15 containers Minimum order: Total 301.320kg 15 containers There is an analysis report of the product for your information; Assistance is provided for shipping the product. If you wish, you can come to the port and examine our products. The products are ready in Istanbul Port in Turkey. If you have a target price, please bid. For your information, I will give you a very affordable price from the market. we are open to price offers Item : Appearance UNITS Spec Milk White Result Milk White Solid Content % Spec: 43.5 46% Result 44.35 Ph Value Spec Min 8.0 Result 8.08 Viscosity mPa.s Spec Max 260 Result 31.3 Mechanical Stability % Spec Max 0.1 Result 0.0056 Surface Tension mN/m Spec 25 -- 32 Result 28 Products Specifications (1) Appearance: milky white viscous liquid without mechanical impurities (2) Smell: Slight smell (3) Solid content: 43-45% (4) PH: 7.8-8.8 (5) Viscosity (25) : < 260mpa (6) Condensate: < 0.01% Packaging, Storage and Transport 1- Flexibag package (net weight 20 MT for 20 FCL) 2-Transport in Confined Spaces at 5-40 C and avoid direct sunlight; 3- Avoid freezing 4-In a clean tank at 5-40 C the stroge period is 180 days 5- Avoid mixing with other substances Description NBR latex is a synthetic latex which has a milky color and a liquid form. Its a part of unsaturated acrylonitrile and butadiene copolymers family. NBR latex properties has excellent tensile strength and good resistance to various oils including mineral & vegetable oils, benzene/petrol, ordinary diluted acids, and alkaline. Our products made with its cutting-edge technologies are recognized for their quality worldwide.
