Flexible Multi-Purpose Hybrid Polymer Sealant Description AFTEK FLEX-PRO MS is a one-component sealant based on silane modified polymer, which is moisture cured sealant. Humidity and temperature can influence on the skin formation and curing speed, and the joint depth can also influence on the curing time. AFTEK FLEX-PRO MS is free of solvents, isocyanates,silicones and PVC. It has very low VOC while curing. It performs good adhesion to most substrates; It is suitable for most of common construction materials,especially to concrete, aluminum, mason, glass, etc. and it is compatible with most of paint systems. It has very good UV resistance property that can be used for interior and exterior applications.
DESCRIPTION Doctor-sil 792 is a high performance, weatherable product and suitable for various interior/exterior joint sealing, glazing, and curtain-wall. It is designed to have 50% movement capability, superior durability, weather ability and adhesion. Especially, it is a low modulus product which can efficiently cope with shrinkage/swelling on joint having superior elongation ratio. FEATURES AND ADVANTAGES * Low modulus product specially designed for new building joint. * Superior bonding strength on various substrates without primer. * Easy application with one component. * Easy installation with good extrusive property. * Superior weather ability and durability. APPLICATIONS * Window & Window Frame Joint Sealing * Interior/Exterior Joint Sealing * Aluminum Frame Assembling * Curtain Wall Joint Sealing
DESCRIPTION ITSEAL is truly developed for sealing window frames with highly durable and flexible properties to withstand severe weathering and extreme temperatures. It seals small gap that normal sealant cannot reach and penetrate. It provides a truly watertight seal deep into minute joint and gap. FEATURES * ITSEAL is the only waterproof sealer that is completely watertight. * It is highly water repellent that no water can get through it during storm. * It adheres well on aluminum and glass * Once dried, ITSEAL is flexible and accommodate joint movement due to vibration. * Mill finish aluminum, oil or wet surfaces can also be well-sealed. VOC CONTENT Type of Regulated Adhesive under the Air Pollution Control (Volatile Organic Compounds) Regulation of Hong Kong: Architectural Sealant VOC Content (Ready to use): 248g/Ltr. SURFACE PREPARATION For maximum adhesion, the adhesive surface must be free of dust, release agent, oil and grease. Wipe surface with solvent is recommended. Solvent are obtainable from ITLS-SB. This information in this catalogue is provided to the best of our knowledge from results gathered both internal and external credited laboratories. However, we have no control over site applications, site conditions and workmanship of the applicator. We therefore will not accept any liability, either directly or indirectly arising from the misuse of these products or when the product is used not in accordance with any advice, specification, and recommendation of information given by us, The user is responsible for checking the suitability of these products for its intended use. APPLICATION ITSEAL can be used with hand operated or air operated grease pump. Other simple extruding device can also be used but it has to be solvent resistance. LIMITATION * Not suitable large gap wider than 5 mm wide and deep. For deeper joint fill to half of it, let it dry overnight and fill it up the next day. * Not suitable for use as expansion joint. COLOUR AND PACKING 26 kg / pail Grey/Black/Bronze/White SAFETY INFORMATION * ITSEAL is flammable. Please keep away from sources of ignition during application. * Avoid breathing in solvent by wearing solvent vapor respiratory mask in badly ventilated area or confined space. * Avoid contact with skin and eyes. If swallowed please contact doctor immediately. * ITSEAL meets the requirement of RoHS regulation of European Union and it does not contain eight heavy metals which were restricted by ASTM F963 or EN71 part3. * Please read the Material Safety Data Sheet in regards to flammability and health and hazard. SHIPPING/STORAGE INFORMATION ITSEAL must be stored in a cool place under 25°C and away from direct sunlight. The shelve life is 12 months if stored in accordance to the recommendation. Dangerous Goods Information: Cement Adhesive, Class 3, UN1133 PG III.
DESCRIPTION ITLS PMS 60 is a single component elastomeric sealant without isocyanates. It cures rapidly under the effect of atmospheric humidity to form a flexible and resistant joint with very good adhesion on most materials. APPLICATION ITLS PMS 60 is suitable for industrial and refrigerated trailers, truck bodies, shipbuilding, air conditioning and ventilation units, sandwich panels and other industrial applications. ITLS PMS 60 can also be used for bonding and caulking different materials used in the building industry : concrete, wood, aluminum, most lacquered metals, polyester, glass, stone, ceramic, and so on. However, for difficult materials especially lacquered or non-ferrous metals, it is necessary to make tests beforehand. INSTRUCTIONS FOR USE SUBSTRATE PREPARATION: The substrates must be clean, even, dry, free of dust, oil, grease and any contaminants that could harm bonding. All traces of poorly adherent paints or coatings should be systematically removed beforehand. They may be cleaned with PMS primer, methylethylketone (MEK) or acetone. Check the compatibility of the solvent used with the substrates. It may be necessary to rub down the substrate beforehand. After rubbing down, the surface should be recleaned. Allow the substrate to dry after degreasing. When using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer. CAULKING: ITLS PMS 60 can be applied by a manual or pneumatic gun. After application, use a putty knife to smooth the joint with soapy water. Do not apply at a temperature under 5 C. In cold weather, store the cartridges at about 20 �°C before use. This product should be used within 24 hours of opening the cartridge protection; otherwise, the sealant could harden inside. Avoid any contact with non-cured polyurethanes during curing. CLEANING: Tools can be cleaned with PMS primer, MEK or acetone before the sealant has completely cured. After curing, abrasion is necessary. STORAGE AND SHELF LIFE 12 months in the original, hermetically sealed packagings between 5 and 25 C PACKAGING 290 mL cartridges and 600 ml sausages SAFETY Not classified as hazardous. Read the material safety data sheet before use.
As below, please let us introduce in detail the structure, function and characteristics of this powerful garden hose: We use an impact-resistant PVC and other composite materials to make our inner tubes. The outer tubes is made of high tenacity Polyesterâ?? and weaves in one-piece completely seamless weave, therefore our powerful water pipes will no doubt withstand water pressure up to 500psi (35kgs). 600+ PSI burst rated. The powerful water hose wear resistance is not easy to be pierced by sharp objects when dragged around the garden. Water can still circulate when accidently folded. Due to the Heavy Duty Hose have heat and cold and UV resistance, so after the water hose are used they can not only automatically air-dry within 24 hours but they are also not breeding bacteria or moss. The joint part of our powerful Heavy Duty Hose are reinforced with Aluminum alloy material. The new Heavy Duty Hose is not only lightweight (approx. 1kg) it is small volume and flat tube design occupying no space for easy to maintain tidiness and storage. The hose will not be rigid and awkward, it is easier and maneuvering for irrigation in the garden, car wash, bathing your pets. We ensure with Hung-Tas powerful Heavy Duty Hose will make your gardening work easier and also no longer in trouble with admission of water pipes. Hung-Ta launched its powerful Heavy Duty Hose in 2017, it has received unanimous approval from consumers in the market. In addition to our market sales in recent years, we have made tremendous achievement of our powerful Heavy Duty Hose.
DESCRIPTION Power Screw adhesive is one of ITLS new range of power adhesives developed to give a cost effective and high adhesion performance. It is very low in odor and free of aromatic solvent for use indoor and outdoor. It was designed for use by both the home handy man and professionals. Power Screw adhesive which consists of tough elastomeric rubber, tackifying resins and Light hydrocarbon solvent. Power Screw can be used in most common construction materials. The substrates are timber, plywood, MDF, particle board, hard board, plaster board, cementitious fibrous board, concrete, ceramic, aluminum, ,mild steel, galvanized iron sheet, back of mirror (on wall only). FEATURES *Unique user friendly, highly pseudo-plastic and non runny characteristic making it TRULY easy to use on vertical wall and ceiling. * Extremely easy to extrude from cartridges in winter making it an all round product for use in all seasons. * Gap filling because of its higher solid content and especially it is highly pseudo-plasticity (soft smooth by stiff, non-sagging) property. * Flexible but tough for use around home and in construction * Easy on hand to extrude and apply due to its unique consistency. *Easy to spread our adhesive evenly and thinly due to its soft buttery consistency. * Broad application for most timber based, cementitious substrates, ceramic and most common metallic construction products. * Printable when dried. * Help to spread out pressure on bonded materials thereby prevent localized stress leading to adhesion failure.
This double-sided quilt blanket is made of 100% cotton both sides, off-white color, with computer embroidery. Lightweight and comfortable with no pilling issues, suitable for hospitals or as a baby blanket. 51X67 inches or customized size.
Ixpe foam.
Cushion and Pillow.
Homewares, home decorative accessories, hoeme furnitures.
Home textiles items including window curtains, table cloth, fabric shower curtains, blankets/throw and quilt. we offer curtains made of wide range of fabrics, from simple weave to complex jacquard or multi prints. and we offer faux fur/velvet blankets made of 100% recycled polyester and 100% cotton quilt with embroidery..
Retail display products: gondolas, showcase, display racks, hangers, fixtures, mannequins, wigs, shopping trolley, baskets, shopping bags, paper bags, non woven bags, suit covers, acrylic display items, wire shelves, shop fittings, packaging products...all types of commercial display products..