2K PU Waterproofing membrane Description The product is good for weather resistant, adhesive and yellowing resistant. It mainly use for courts top coat and drawing. Well adhesion to RC, metal, and wood. Features 1. Good adhesive. 2. Well weather resistant. 3. Well wear-resistant and water-resistant. 4. Its a kind of a protective paint. Use for protecting metal, wood from rust. 5. Coat for drawing. Coating Methods Use brush, spray or wheel to daub in uniformity by twice.
DESCRIPTION CS-501 is our key, the range of high quality, high performance and elastic sealant. APPLICATION & FEATURES 1. Normal partition walls, brick walls, concrete walls, and wood compartments are filled with joint. 2. Small pit filled. 3. Good adhesion to cement wall, brick, wood and porous substrates. 4. Excellent elasticity to avoid the cracking on the seams. 5. Well durability. 6. Excellent elasticity to avoid the cracking on the seams 7. Paintable, without peeling and good workability. 8. Green and low pollution. PACKAGE & TOOLS 300ml / cartridge Cartridge gun, Manual or Trowel
Professional Caulking Gun 15 *600ml *For 600ml capacity *Aluminum tubular sealant holder *Black aluminum casting trigger & handle , swivel *With attachments for sachet (sausage) pack silicone 1 pc tube nozzle(250TN) 1 pc push disc (250 PD2) *Each in PE bag *10 psc /ctn/10.8kgs/1.39cft
DESCRIPTION CP-320 is a fast-curing, two-component, bitumen-extended polyurethane fluid. It produces a highly elastic membrane with strong adhesion to many types of surfaces and excellent mechanical and chemical resistance properties. FEATURE Components easily mixed, fast curing Its low modulus gives it excellent substrate crack-bridging properties Excellent adhesion on almost any surface Excellent thermal resistance, max service temperature 80 Resistance in the cold: Film remains elastic even down to -40 Good chemical resistance Can also be used as a joint sealant APPLICATIONS Bathrooms, balconies, basements and rooftop Gypsum and cement boards Light roofing made of metal or fibrous cement Non-potable water tanks Bridge platforms Cut-and-cover tunnels Irrigation channels PACKAGING A : 20LT B : 20LT
Description CA-100FR is a low cost,gypsum-based, cementi-tious,spray-applied fireproofing product designed for and easy, fast application to steel and concrete substrates. CA-100FR incorporates application benefits including Graces patented injection technology for fast set and improved hangability. Use 1. High-rise and low-rise commercial office buildings. 2. Conventional buildings. 3. Hotels,resorts and casinos. 4. Health care facilities,sports centres. 5. Schools and museums. 6. Airport terminals. Feature 1. High bond strength. 2. Quick set in 15 minutes. 3. Resists damage from air erosion and abrasion. 4. Gypsum-based formulation contains no mineral fibres. 5. No topcoat or surface sealer required.
IT-6600 is an easy-touse water repellent, using silane grafting (or coupling) technique to form water-crosslinked property. It is a non-solvent based resin that penetrates into the substrate heightening its waterproofing ability. Use as a protective coating on porous, water-resorbing surface like ceramics, bricks, tiles, timbers...etc. To prevent powdering, weathering effect on concrete walls Surface waterproofing and leak-prevention apply on internal/ external walls, stones, tile surfaces. Excellent weatherability and waterproofing properties, due to silane grafting (or coupling). High permeability because of the semi water soluble, small diameter of the particles. Ideal to apply on non-organic, porous substrates due to the excellent water-tight property.
PE-265 is and acrylic pressure-sensitive adhesives. It has high initial tack, and suitable to apply on PVC flooring tiles. 1. Wide-range decorative applications. 2. Domestic constructions. 3. Compatible with PP, PE, PVC to non-woven fabrics or foam products.
1.High solid content 50% 2.Has high transparency,low fluidity and slump 3.Can be extruded easily in winter(about-15°C) 4.Can stick Metal, Timber, Concrete and other building material 5.VOC free versions are also available, using VOC exempted solvent.
DESCRIPTION AFTEK PU 25 is a one component polyurethane based elastomeric sealant which cures under the effect of atmospheric humidity to form a tough and flexible seal joint with excellent movement performance. AFTEK PU25 performs excellent adhesion on most building materials with proven weather resistance against UV, Ozone etc. APPLICATIONS Precast façade unit sealing Light weight cladding panel Construction expansion joint Window, door flame perimeter joint Natural stone joint sealing Ceramic joint sealing Various building material joint sealing, ie. fiber glass, rigid plastic, etc FEATURES One component, ready to use High movement accommodation +/- 25% Can be over paint Non toxic, sag, staining One component ready to use Excellent weather resistance Prime less for most substrates
Flexible Multi-Purpose Hybrid Polymer Sealant Description AFTEK FLEX-PRO MS is a one-component sealant based on silane modified polymer, which is moisture cured sealant. Humidity and temperature can influence on the skin formation and curing speed, and the joint depth can also influence on the curing time. AFTEK FLEX-PRO MS is free of solvents, isocyanates,silicones and PVC. It has very low VOC while curing. It performs good adhesion to most substrates; It is suitable for most of common construction materials,especially to concrete, aluminum, mason, glass, etc. and it is compatible with most of paint systems. It has very good UV resistance property that can be used for interior and exterior applications.
APPLICATIONS & CHARACTERISTICS 1. High bonding strength and easy to brush. 2. It can be applied for many materials, such as wood, PU leather, sponge and cloth etc. 3. Water based, green product. PHYSICAL PROPERTIES : 1. AppearanceBeige liquid 2. Main ComponentWater-based neoprene. 3. Solid Content 52± 2% 4. Viscosity 4500 5500 cps (25, LVT) 5. Shelf Life 6 months
CP-311 Hyperguard WPU is water-based polyurethane, waterproofing coating for roofs when mechanical durability and outstanding waterproofing properties are required. It forms a non-penetrating against moisture film with resistance to UV and mechanical stress. Ideal solution for waterproofing walkable roofs High mechanical strength Applicability and on cloudy days as the final polymerization of the material is done by evaporation, and therefore under shading No appearance of holes in the surface during the curing of material Protection of polyurethane foam insulation Certified with CE Eco-friendly (Water-based) Easy to apply Resistant to temperatures from -15 to 80
DESCRIPTION CS-106 Winshield is a specially formulated copolymer protective coating used in place of windows frames, glass, bathtub, plywood, plastic faced formwork, moulds prior to casting concrete, to ensure a clean release and protective purpose. FEATURES Do not corrode glass, plastic or equipment Minimize subjects cleaning Cost effective Apply on plywood, timber, steel, glass and plastic faced Non-staining, Non toxic, non hazardous Water-based and environmentally compatible
Description Self-adhesive membrane is high-strength PE based,combined with bitumen layers, forming rigid copolymer waterproofing sheets with high endurance. Use 1.Foundation and basement waterproofing 2.Flooring,roof deck waterproofing 3.Interior and exterior walls 4.Tunnels,reservoirs,sewage treatment tanks Feature 1.Easy apply, no torch equipment required 2.Self-adhesive,fast and easy application 3.Can combine with the structure as a whole, therefore prevent vapor transmission and expansion Series Product CP-107/Gravel,PE/Thickness : 2/3/4/5mm CP-108/Sandstone/Thickness : 2/3/4/5mm OP2100/PE/Thickness : 1.5mm XOP2101/Aluminum foil Layin plastic mesh/Thickness : 1/2/3/4mm XOP2102/MuLTILAYER PE& Aluminum/Thickness : 1/2/3/4mm
AFTEK FLEX-PRO MS is a one-component sealant based on silane modified polymer, which is moisture cured sealant. Humidity and temperature can influence on the skin formation and curing speed, and the joint depth can also influence on the curing time. AFTEK FLEX-PRO MS is free of solvents, isocyanates, silicones and PVC. It has very low VOC while curing. It performs good adhesion to most substrates. It is suitable for most of common construction materials,especially to concrete, aluminum, mason, glass, etc. and it is compatible with most of paint systems.It has very good UV resistance property that can be used for interior and exterior applications.
PREPARATIONS The substrate, bolt and anchor holes must be clean, sound, dry and free of oil, grease, without laitance and loose particles. Prewet the bolt holes thoroughly, but no standing water in it. Before applying ITLS CA-007H absorbent substrates must be saturated thoroughly, but without standing water. MIXING Mix 3.2-4.4 liters of clean water with 25kg bag of ITLS CA-007H together. To add water based on the condition of stirring and keep stirring around 5 minutes until grouting well. APPLICATIONS Pour ITLS CA-007H mortar after mixing into the reserved cavities and recesses use the stick or bar to remove the air bubble, ensure that air entrapped into the grout is allowed to escape. Suggest to blend the grout by auto-mixer for better application. COVERAGE 25 Kg ITLS CA-007H when mixed with water will produce approx. 13.5 liters of Liquid Grouting Mortar. ITLS CA-007H suggest to be placed in thickness ranging from 10-15cm/layer.
Features * With excellent adhesion, non-sagging and construction resistance. * Without cracking and bulging after curing. * Specific design for spray plastering. * Applying by spraying machines efficiently. * Suitable for tiling. * Interior wall, exterior wall, panel wall and small area ceiling rendering. Application 1. Substrate must be free from grease, mould oil, rust, rusty metal , wood peels, paints, plastics, loose particles, contamination on any traces of foreign materials affecting the adhesion of CS-010. 2. Moisten the substrate overnight and also at the time before the commencement of operation. 3. Suggest to use CC-400 Concrete Bond as primer to adding adhesion for smooth and low porous substrates. 4. CS-010 is suitable for any type of spraying machine. Mix a packet of 40KG powder with 6.4liter of water and stir well for use. Its thickness should be maintained at 15mm and wait for 6-24 hours to apply for increasing the thickness. Storage Storage life is 12 months if the product is kept in a dry place. Package 40kg/powder bag
DESCRIPTION CA-002W(12) is an Acrylic Polymer emulsion, especially used to improve the physical properties of cement. After mixing grout with CA-002W(12) can increase water resistance and bonding strength. AREA OF APPLICATIONS * Repair Mortar for Concrete Areas * Industrial Flooring * Bonding Agent for New to Old Concrete * As Cement Grout Additive * Enhance adhesion strength of Mortar. PACKING & STORAGE 20kg per plastic pail. Please store in cool places and avoid direct sunlight.
DESCRIPTION CC-103(1K) Crystalline Waterproofing Materials is fusion resin powders which contains water-soluble crystalline mineral coating with special additive syntheses. It will have a protective coating which is firm and impact resistance after curing. CC-103(1K) is a high technology product to prevent water leakage. ADVANTAGES * Prevent the constructions aging phenomenon * Avoid the leakage and mold on the wall * Effective against negative water pressure * With good stability * Non-Toxic APPLICATION * Internal and external walls * The leakage of inner wall in basements or the protection against negative water pressure * The construction of base isolated structures * Reservoir; drinking water pool * Contaminated water pool; water storage tank PROCEDURE 1. Ensure all surfaces which CC-103(1K) will be applied are clear. 2. Mix one pail(22.5KG) of CC-103(1K) and 4.5~5.0Liter water well by construction mixer. 3. Wait for 3-5 minutes and stir before use; use finishing trowel to smoothing or apply evenly with a nap roller. 4. Use finishing trowel to smoothing after using spray machine. PACKING 22.5KG per pail. STORAGE 6 months in original container stored in dry conditions. LIMITATION The crystalline products need to be used between 4 °C ~ 32 °C when applied.
DESCRIPTION CP-310 was synthesized from imported high-technology macromolecule resin and specialized paint that is different from general acrylic resin. CP-310 is a perfect product to provide a high water-tolerant, climate-tolerant, and anti-UV ability. FEATURES * Excellent environmental water-based waterproofing paint * Water-based, Non-toxic, odorless, inflammable, and harmless * Fine adhesion, extreme toughness, high elastic, and high endurance * Hydrophilic, and may be applied on damp surface USE RoofBuilding, condominium, factory, barracks, school, garden and etc.. WallsBasement wall , exterior wall , and etcâ?¦ PREPARATION 1. (The following steps are recommended for best results) 2. New concrete must cure for a minimum of 30 days 3. All holes or cracks must be properly patched 4. All surfaces must be clean and free of dirt, dust, efflorescence and oil APPLICATION (The following steps are recommended for best results) 1. Stir well before use. Do not thin; however, if thinning is necessary, thin water at a rate of no more than 10% 2. One prime required CP-310 primer 3. Two coats are required for the best resultskeep the thickness of each coating below 1m. 4. Wait for each coating to be total dry before overlaying the next coat. The interval time between each coating is minimum of 8 hours. COVERAGE 5-gallons about 33m2 COLOR Grayã??Whiteã??ivoryã??Green DRY TIME Dries to touch in about 1-2days . Low temperatures or high humidity conditions will affect drying time. Full cure should be reached in 14-30 days. CLEAN UP 1. Clean hands and tools with soap water. 2. After 30 days or paint has fully cured, areas may be wasted using a non-abrasive, mild detergent and cellulose sponge. WARNING (Read the following carefully for your own safety) 1. Keep out of reach of children-Do not take internally. 2. May cause eye, skin and respiratory tract irritation. May be harmful if swallowed. Use only with adequate ventilation.