Product Description : When the wet three-branched red colour stigma with its orange end is been removed and dried. Pooshal Saffron which can easily been recognized by its orange end, has different grades according to its orange end size. The smaller the length and size of the orange part, the saffron will be more favourable due to its better colour number. Product origin : Iran Minimum Order Size and Packgaing details : 1Kg Row Analysis Result Unit Standard Range 1 Crocin >215 Absorption Min 210 2 Moisture 3.33 - f Max 8 3 Foreign 0.05 Percent Max 0.1 4. Extraction And Negative - Negative Detection of Synthetic Dyes 5. Coleestridium 20 /g Max 10 6. Entrocococci Negative /g Negative
Product Description : When the full wet saffron filament is cut from the junction of the three-branched red stigma, separated from the white part, dried, this type of saffron which is completely prominent and scaly form is called Negin and it is almost the best, the most expensive and most valuable type of saffron. In the Persian literature, Negin is said to a very precious stone, high-quality, brilliant and highlighted which is placed on a gold ring. Negin has been named for this type of saffron because of its value and beauty and brilliance. Product origin : Iran Minimum Order Size and Packgaing details : 1Kg Row Analysis Result Unit Standard Range 1 Crocin >235 Absorption Min 220 2 Moisture 3.33 - Max 8 3 Foreign 0.05 Percent Max 0.1 4. Extraction And Negative - Negative Detection of Synthetic Dyes 5. Coleestridium 20 /g Max 102 6. Entrocococci Negative /g Negative
Product Description : When the red part of the saffron stigma is broken down and removed from the saffron bunch, the red dried saffron filaments has lost its scaly and three-branched connection form due to the breakage of the stigma, and it’s seen in form of dried, relatively flat and broken filaments. Product origin : Iran Minimum Order Size and Packgaing details : 1Kg Row Analysis Result Unit Standard Range 1 Crocin >225 Absorption Min 220 2 Moisture 3.33 - Max 8 3 Foreign 0.05 Percent Max 0.1 4. Extraction And Negative - Negative Detection of Synthetic Dyes 5. Coleestridium 20 /g Max 10 6. Entrocococci Negative /g Negative
Oil Well Testing Manifold 3" x 10000psiWellhead Testing manfiold Drilling Floor Manifold 3" 10000psi Overview of Testing Manifold 3" x 10000psi The manifold and standpipe are from simple low pressure to extreme sour gas service. The manifold isdesigned with any types of chokes: Positive, adjustable or Automatic and automatic chokes with a working pressure of 3000psi to 15000psi. All components are suitable to H2S service as defined byNACE MR0175. Fittings include buffer chambers, spools, crosses and tees. All parts of well testing manifold are manufactured as per API6A. And the choke manifold assembly is as per API 16C Specification of the drill floor manifoldSize: 1 1/2", 2", 3"Working Condition :Oil, gas, Mud and water Standard: API 6AAPI Material Class: DD/EE or as per request. JC Petroleum Equipment Facotry manufactures and supplier the various wellhead manifold andrelated parts to meet different requirement in oulfield service operation. The wellhead manfioldsare conformed with API 6A and API16C specification, and applied for high pressure and high temperature working condition. The wellhead manifold include choke and kill manifold, fracturing manifold, testing manifold, drilling floor manifold. etc And we can design the wellheadmanfiold as per the customers' requirements Oil Well Testing Manifold 3" x 10000psiWellhead Testing manfiold Drilling Floor Manifold 3" 10000psi
APPROVED DGT Approved in 2021 to replace the triangles. - Mandatory from 2023. - Greater security: This light implies greater security than the emergency triangles. It can be placed on the roof without having to leave the vehicle. - The energy of any V-16 light comes from an alkaline battery that gives it up to 2.5 hours of autonomy in EMERGENCY mode, without the need for wiring.
***Fogger for your community ***High speed rotary atomizer (more than 10,000rpm) is accepted. It makes â?? The ultra-fine particles of chemical â?? Minimized chemical consumption â?? Maximized pest or diseases control effect ***Moving atomizer part â?? It relieves the fatigue of wrists. ***Mounting motor filter â?? Prevent inflow of moisture, dust, etc â?? Prevent motor damage and extend motor usage period â?? Reusable after cleaning *** Independent air and chemical control valve â?? The speed, distance, and amount of spray are simply controllable. Features â?? Optimized design for small scale work â?? The consumption of chemical is minimized while pest or diseases control effect is maximized due to the spray system of the ultra fine particles It relieves the fatigue of wrists by moving the injection nozzle up and down. â?? The built-in design of the injection nozzle makes its storage easy Rated Voltage 220V-60Hz Rated Current 1.4kW Dispensing Capacity 4L Discharge Rate 1.2L/min Droplet size 20~50�? Dimensions 655*200*310mm Dry Weight 4.3kg Cord Length 6m
CATIA V5 is the leading solution for product development success. It addresses all manufacturing organizations, from OEMs through their supply chains, to small independent producers. CATIA, for virtual product design, can be applied to a wide variety of industries, from aerospace, automotive, and industrial machinery, to electronics, shipbuilding, plant design, and consumer goods. Today, CATIA is used to design anything from an airplane to jewelry and clothing. With the power and functional range to address the complete product development process, CATIA supports product engineering, from initial specification to product-in-service, in a fully-integrated manner. It facilitates reuse of product design knowledge and shortens development cycles, helping enterprises accelerate their response to market needs. Empower end-to-end industry process coverage for composite design to manufacturing, electrical harness design to documentation and printed circuit board design. Increase range of manufacturing part designed with Functional modeling Superior productivity for powertrain and chassis designer with breakthrough auto-draft Extends the scope for multi-discipline 3D collaborative environment with ENOVIA VPLM Navigator Expands the reach of 3D to a wider community with CATIA 3DLive and 3D XML
Sugar icumsa 45 The commodity shall be corresponding as per inspection certificate issued by sgs or compatible world class inspection organization at port of loading confirming that the commodity meets the following specifications:specifications:commodity White cane sugar icumsa 45 polarity at 20 deg. Centigrade 99.80 min. Ash content 0.04% m¯x. Moisture 0.04% m¯x. Solubility 100.0% drt and freeflowing. Granulation Fine. Icumsa M¯x.45 icumsa, attenuationindex units method no: 4-1978) sediments: None color Sparkling white crop 2005 magnetic particles Mg/k 4. So Mg/kg 20. Radiation normal w/o presence of cesium or iodine: certified smell Free of any smell reducing sugar 0.05% max substance Solid, crystal max max as 1 p.P.M max os 2 p.P.M. Max cu: 3 p.P.M.: max cu 3 p.P.M. Hpn staph aureus Nilpoisonous seed / husks: phytosanitary certificate of no radiation, no virus, no insect parts, no poisonous matter and non genetic and is suitable for human consumption.Quantity, quality, weight by sgs sellers cost and established at port of loading.Quantity: 12.500mt-more 1.000.000mt Product packing: in bags of 50 kg. Pp
IRON ORE CONCENTRATE 62% FROM CHILE Our procedures cannot be discussed or disputed as part of our purchases, all means of verification and in particular control by independent control bodies is mandatory. 1) Seller sends Soft Offer to the buyer. 2) If Soft Offer from seller is acceptable, buyer will issue an LOI with all the details + banking information for sellerâ??s approval, and BCL or SWIFT199 3) If LOI from buyer is acceptable, seller will issue an initial draft contract SPA (Sales and Purchase Agreement) for buyer to confirm the order. 4) After contract (SPA) is signed by both seller and buyer then the contract (SPA) will be the official document for buyer to open the RDLC to seller. 5) After RDLC is received at sellerâ??s appointed bank, seller will proceed with production accordingly. The RDLC Issuance Bank and its Parent Organization bank must not be under sanction by USA. Payment term will be RDLC payment after SGS inspection at port of loading. Order Quantity: XXXXXXX mt per month = XXXXXXXX mt. Production capacity is on first come first serve basis. Documents for DLC negotiation: - Original Commercial Invoice. - Original Packing List - Original SGS certificate of Quality and Quantity issued at port of loading. - Original full set 3/3 Clean on Board Bill of Ladings, consigned to RDLC Issuance Bank, and notifies RDLC applicant, marked freight prepaid. - Original Certificate of Origin issued by the Chamber of Commerce and Industry of Chile RDLC Term: By documentary RDLC 100 %, Irrevocable, Confirmed and Transferable, Operative at sight at LOADING PORT via MT 700 Payable within three (3) banking days of buyer's Bank Receiving original shipping documents from seller. Third party shipper acceptable. RDLC transferable by advising bank. Partial shipment not allowed +/- 5% allowance acceptable. Inspection: SGS inspection at port of loading at seller's expense. Goods will be loaded on board of vessel only if SGS inspection is done and passed. The SGS report will be one of the documents for RDLC negotiation. Packing: Bulk on ship
Quantity MOQ : ONE CONTAINER (20 Tm.) Annual Quantity TBD Delivery As per FOB Delivery Schedule Payment 100% DLC FOB at the port of loading Testing SGS or BV or Similar SPECIFICATIONS: Nitr�³geno (N-NO3) 0,5% F�³sforo (P2O5) 18% Potasio (K2O) 1% Magnesio (MgO) 1,5% Calcio (CaO) 20% MICRONUTRIENTS: Boro (B) 160 ppm Zinc (Zn) 390 ppm Manganeso (Mn) 800 ppm Certifications: �¬ Organic Agriculture according to Regulations (EC) No. 834/2007 & 889/2008 �¬ Organic Farming according to the Japanese Agricultural Standard (JAS) �¬ Ecological Agriculture according to the NOP Regulation (National Organic Program) Procedures: Our procedures cannot be discussed or disputed as part of our purchases, all means of verification and in particular control by independent control bodies is mandatory. 1)Sell er sends Soft Offer to the buyer. 2)If Soft Offer from seller is acceptable, buyer will issue an LOI with all the details + banking information for sellerâ??s approval, and BCL or SWIFT199 3)If LOI from buyer is acceptable, seller will issue an initial draft contract SPA (Sales and Purchase Agreement) for buyer to confirm the order. 4)After contract (SPA) is signed by both seller and buyer then the contract (SPA) will be the official document for buyer to open the DLC to seller. 5)After DLC is received at sellerâ??s appointed bank, seller will proceed with production accordingly. Marine insurance for shipment is included. Inland transportation at destination port is not included. The DLC Issuance Bank and its Parent Organization bank must not be under sanction by USA. Payment term will be DLC payment after SGS inspection at port of loading.
Well Testing ESD Control SystemWell Surface Testing Emergency Shutdown System Overview of the ESD Control System The Emergency Shutdown System-ESD control system is the long-range capital equipment, the ESDsystem controls the surface safety valve / SSV. The ESD Control console is composed of the control cabinet, manage ducts, etc. The surface safety valve(SSV), for often closing type. When use, The ESD control system urges the surface safety valve / SSV to be opened through the pressure medium. If keepdriving the pressure, the surface safety valve/SSV will be in the state of opening all the time. Features of the ESD Control System * Carry out remote control of the surface safety valve* Easy to operate and maintenance Emergency Shutdown(ESD) system SpecificationPneumatic Source Pressure0.1~1.0MpaNon-Continuous Max. Pressure 46MpaContinuous Max. Pressure35MpaFlow rate1.36 l/minPressure ratio1:46SSV Drive pressure21MpaESD Max. Working pressure35Mpa JC Petroleum Equipment Facotry manufactures and supplier the various wellhead manifold andrelated parts to meet different requirement in oulfield service operation. The wellhead manfioldsare conformed with API 6A and API16C specification, and applied for high pressure and high temperature working condition. The wellhead manifold include choke and kill manifold, fracturing manifold, testing manifold, drilling floor manifold. etc And we can design the wellheadmanfiold as per the customers' requirementsWell Testing ESD Control SystemWell Surface Testing Emergency Shutdown System
Couplings.
SPARE PARTS INDUSTRIAL EQUIPMENT INDUSTRIAL SUPPLY OTHER FOR AIRCRAFTS SHIPS BOATS MINING INDUSTRY OIL INDUSTRY INDUSTRY ANY KIND WE ARE DIRECT SELLERS
Engine scrap and gear boxes.
Machined parts.
Car and home air fresheners.Producers
Immediate availability in a German warehouse to go see and pay stock blue medical nitrile truck load 1.33 and blue medical vinyl truck load 0.99 more information on sizes you can contact
Precision turned parts.
Second hand clothing,cars and trucks,also we do pay stock fish.
We Are Spanish Producers Of Avocado, Olive And Sunflower Oils. Refined Or Cold Pressed. Organic Or Conventional. Food And Cosmetic Use. We Sell In Bulk (drum 200 Kg, Ibcs 950 Kg, Flexitank And Tank Truck) And We Pack With Private Brand (glass And Pet Bottles). Esencia Hispania Group
