.Generating set preventive maintenance services (electrical & mechanical)
Oil field equipment.Repair and servicing of fuel dispensers in middle-eastern europe
Turbochargers, common rail fuel injection system equipment (injectors and fuel injection pumps), machine for cleaning of dpf/fap/scr/cat filters of passenger cars, trucks, agricultural and special equipment, equipment for programming and testing turbines..Repair and export
Internal, external, mobile signage.Design, manufacture, installation, maintenance
Leads Composition structure 1. There must be no molten slag, particulate oxygen, inclusions and external pollution on the surface of lead ingots. 2. Lead ingots must not have cold partitions, and must not have flash burrs larger than 10mm (repairing is allowed). Sign 1. Each lead ingot will be cast or printed with the trademark and batch number. 2. Use paint that is not easy to fall off to mark the brand mark on the lead ingot. The color and position of the mark should meet the requirements. 3. Each bundle of lead ingots should have a striking and difficult to fall off mark, indicating the manufacturer's name, product name, brand number, batch number and net weight. Single weight of small ingot 48kg�±3kg,42kg�±2kg,40kg�±2kg,24kg�±1kg; Single weight of large ingot 950 kg�±50kg,500 kg�±25kg Package The small ingots are bundled and packed with non-corrosive packaging tape. Large ingots are supplied as bare ingots
The patented Ecological hydrated organometallic catalyst for solid, liquid and gas fuels REDOX CO / 12 dosed in an amount of about 0.5 kg / Ton of gas, heating oil, diesel, gasoline, wood, hard coal, and lignite: - gives surprisingly large economic effects and protection of the natural environment, - reduces fuel consumption by 5-15%, - reduces the emission of toxic gases (CO and NOx) by 40-75%, - increases the efficiency of energy devices by 5-10%, - ensures maintenance of internal heating surfaces without scale and tarnish. The innovative metal-organic catalyst burns (completely neutralizes) highly toxic, carcinogenic dioxins (PCDD) and furans (PCDFs). Novel inventions will limit the non-investment reduction of up to 90% of dust (ash, carcinogenic soot) -SMOG. According to the World Health Organization (WHO), smog causes asthma, lung cancer, and heart disease, as well as haze, which reduces visibility. Pollutants contained in the air migrate to the soil and waters, causing contamination of the entire ecosystem, and ultimately go to our digestive system and blood vessels. Application areas: all economic sectors, especially energy, heavy industry, machinery, light, agri-food municipal waste incineration plants, hospital waste incinerators and others. Road, sea, heavy road and other transport.
High quality lightweight polyester putty for car repairs – latest technology in putties. - Creamy texture. - Very low density. - Extremely easy to mixing and apply. - Exceptional sanding quality. Color - Light Blue. Gloss Grade – Matt. Density – 1,00 kg/l.
One component acryl filler It is single component product, and it does not require the addition of the hardener. Thanks to suitable hiding and filling properties, and very good adhesiveness the primer can be put on practically all surfaces. 1k primer is resistant for chemical and atmospheric factors. It is characterized by good polishing features and is simple in application. Packing size 0, 5l and 0, 8l.
ACRYL FILLER HS 4:1 It is very good filling properties. Primer is fast curing, and even in case of thick polished. This primer determines the good basis assuring the perfect appearance of the varnished coat. standard packing size : 0,8 L + 0,25L.
Auto parts, oil seal; valve seal; mechanical seal; tensioner; full gasket & cylinder gasket; auto repair kit; primer pump; ignition cable set; shock absorber; rubber products; sealing washer; o-ring, square ring & o-ring kit; brake cylinder & clutch cylinder.
Water pump seal Industrial pump seal Air-condition compressor seal Pump seal Impeller for water pumps We also produce and supply impellors with all kinds of materials such as, pps, pa66, abs and brass. The picture above shows our product range for reference. If you are interested in some products or need more information.
IT 2007 varnish is two component acryic transparent lacquer with low content of volatile components. it is intended to profession use, in the 2:1 system. Hs Varnish creates the hard coat with the brillinat polish and fits for lacquer finishes of cars after all types of repairs. standard packing - 1L and 5L.
We import rock salt intended for winter road maintenance. It is a rock-salt with a high content of nacl. Its advantage is the coarse-grained, which makes that salt dissolves slowly, has a long duration of action. Have current certificate road salt on environmental hygiene department in poland and the institute of roads and bridges in warsaw. Packing: - 25 kg bags - loose We provide: - large quantities - attractive price - good quality of the goods - timely delivery to a specified address. 25 kg bags, Loose
Product features: Dispenser capacity: 1 L. Dispensing type: automatic, with the option of changing the dose of disinfectant liquid Housing: steel, powder coated Power supply: Maintenance-free operation of the device on one charge up to 30 days Batteries: LED indicator signaling system operation and LED indicator signaling low battery level Colour: gold-black or white-blue (other RAL colors on request) For use: inside and outside buildings Refilling: from a multipack (any soap or liquid) Dimensions: 1600 x 633 x 433 mm Weight: 25 kg Assembly: a free-standing station, all bolted together, easy assembly and disassembly of the device Closing: rear door lock Regulation: Adjustable foot structure Additional information: light weight allows easy movement of the device with a stable construction Production: Product made in Poland WE ALSO OFFER: Option to choose station color and place your own logo! Hire sale option! Discounts for wholesale orders! Attractive margins for distributors!
Parameters: - simulation and measurement: thermocouple signals J, K, T, R, S, B, U, L, E, N, with auto-compensation of terminal temperature, signals in thermocouple and thermostat system, resistance thermometer signals: Pt 100, Pt 500, Pt 1000, Ni 100, Cu 100, resistance signals from 10 up to 5 , voltages and currents in range: -11 V...+11 V and 22 mA...+ 22 mA - accuracy 0.025% - STEP and RAMP function, - led out 24 V terminals, - RS 232C interface, - available in the option for pressure calibration. The INMEL 60 calibrator is destined to check and control systems, industrial automatic control engineering devices such controllers, recorders, meters, etc. This instrument has the possibility to generate and measure signals from ten thermocouples, five thermometer resistances, four voltage ranges, two current ranges, two resistance ranges. Thermoelectric terminals have an internal temperature measurement and for this reason make possible the generation or measurement of thermoelectric signals with the compensation for the given thermocouple. In this working mode, a real thermocouple is added to thermoelectric measuring terminals, and compensation conductors to thermoelectric generating terminals. The calibrator ensures the simultaneous generation of the signal on output terminals and the measurement of the signal on measuring terminals, thanks to this feature the calibrator is suitable to check transducers. The INMEL 60 calibrator enables to check two-wire transducers. the used graphical display contains a lot of information on a screen with a good readability. The display ground-lighting, which can be switched off, is especially useful in conditions of an insufficient lighting. The internal supply from the battery enables the work not only in laboratory conditions but also on the object. The calibrator can also be used to the maintenance and servicing of industrial measuring instruments, systems and electronic equipment. Application: Checking and calibration: - measuring transducers controlled by a voltage or current signal, a thermoelement or resistance thermometer, - two-wire transducers, - temperature meters, - pressure transducers, - manometers, - measuring and control lines.
Goods lifts ISO-MAX Capacity: 300 / 500 / 750 / 1000 kg The ISO-MAX is a goods only lift with two fixed cabin areas of 1,00 x 1,40 m (capacity 300, 500, 750 and 1000 kg) or 1,275 x 1,50 m (Capacity 750 and 1000 kg) and a variable cabin height from 1,20 - 2,00 m Lift unit complies to EU-Directive for machines and has a EU-Declaration of conformity of German T_V Hanover / Sachsen-Anhalt e.V. Compared to a similar hydraulic freight elevator the ISO-MAX will offer you some significant advantages and savings: corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Machine room door double hinged door with sash lock with side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller call and send control with 24 V, safety circuit 230 V pre-wired with plugs adjustable and time-limited despatch delay device (1-5 s) electronic overload contact acoustic arrival signal position indicator on each entrance thermal motor protection as main switch pre-wired on control panel machine room light with socket ISO-PM 1000 Capacity: 1000 kg Goods lift along directive 95/28/EG with max. 2 persons corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only cabin push button with send control - landing push buttons with call and send control machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) reducing of interference prone by setting a safety feature instead of cabin door space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffet 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides safety light curtain cabin light - cabin ventilation type tested safety gear special pushbuttons in cabin - emergency call - emergency light - prepared for outgoing emergency call special safety gear (type tested) special cabin apron (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Maintenance room door hinged door with sash lock with side frames made of galvanized steel Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V / 50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control Cabin push button with send control Landing push buttons with call and send control Micro-processor technique in controller cabinet Selector with absolute encoder
Bituminous materials for waterproofing of buildings and constructions: bitumen sealant with solvent bitarel; bitumen primer with solvent (quick drying) bitarel; bitumen sealant solvent free (water based) bitarel eco; bitumen primer solvent free (water based) bitarel eco. for sealing and repair of roads and airports: bitumen hot applied sealant n2 bitarel btl; bitumen joint tape for road repairing batarel jet e; bitumen polymer primer bitagrunt..
Organic Cedar Shampoo gently cares for hair, repairs its structure, gives smoothness and radiance. White Soap Root carefully cleanses the hair and the scalp without disturbing natural balance. Northern white cedar oil and flax oil intensively nourish and thicken the hair structure. Wild Siberian juniper and amaranth stimulate regenerating processes and hair growth, restore the hair structure, making it soft and elastic. Sage extract moisturizes the scalp, prevents fragility and hair loss.
Cedar Conditioner repairs damaged hair structure, gives it smoothness and radiance. Northern white cedar oil and flax oil intensively nourish and thicken the hair structure, protecting it from negative environmental influence and thermal hair styling. Wild Siberian juniper and amaranth stimulate regenerating processes, strengthen hair, making it smooth and elastic. Mulberry and Sage extract leave hair supple and shiny.
Banana Milkshake Repairing Body Cream is a seductive light treat for your body to make your skin amazingly soft and velvety. The perfect body needs wonderful and tender care. Organic banana extract prevents dry and flaky skin; organic avocado oil provides intensive nourishment that helps to stimulate your skin natural renovation processes; macadamia oil and organic vanilla give elasticity to your skin and help to reduce stretch marks.
