PPE kits.
High end cosmetics, facial, shower/water filters, antiviro spray, suitcase, watches.
Perfumes, make up, eyeshadows, lipsticks, foundation, facial creams, nailpolish, hair colouring, skin care.
Test, selftest, rapid test kit , ffp2.
Water deionised, silica dioxide, nitrogen, oxygen.
Parameters: - voltage ranges from 1.4 V up to 750 V, - current ranges from 5 mA up to 100 A with a galvanic insulation of outputs, - frequency ranges from 40 Hz up to 1250 Hz, - power generation from 0 W up to 3 x 75 000 W, - voltage and current accuracy 0.05%, - power and energy accuracy 0.8%, - harmonic course generation, - synchronization with supply frequency, - RS-232C, IEEE488 interfaces, - measurement of DC voltage and current up to 10 V and 20 mA, - setting optional parameters: U, I, P, E, cos, t. INMEL 8033 Calibrator is a three-phase electric power and energy calibrator. It generates voltages of equal rms value on three voltage outputs and currents of equal rms value on three current outputs. The voltage on voltage output and the current on current output are shifted between them by set phase angle. Against to the previous model calibrator type INMEL 33, the new device INMEL 8033 one characterize less voltage, current, power and angle generation error, has also wider frequency range of quantity generate and richer program function set. The most important from program functions is the possibility to generate harmonic course. The main distinctive feature of INMEL 33 from INMEL 8033 is digital method measurement generating and stabilization output signals. Application: Checking ang calibration: - Wattmeters, varmeters, - phase meters, - frequency meters, - AC of voltmeters and ammeters, - power factor and phase angle meters, - measuring transducers, - watt-hour meters in single and three-phase system, - power engineering protections.
Parameters: - simulation and measurement: thermocouple signals J, K, T, R, S, B, U, L, E, N, with auto-compensation of terminal temperature, signals in thermocouple and thermostat system, resistance thermometer signals: Pt 100, Pt 500, Pt 1000, Ni 100, Cu 100, resistance signals from 10 up to 5 , voltages and currents in range: -11 V...+11 V and 22 mA...+ 22 mA - accuracy 0.025% - STEP and RAMP function, - led out 24 V terminals, - RS 232C interface, - available in the option for pressure calibration. The INMEL 60 calibrator is destined to check and control systems, industrial automatic control engineering devices such controllers, recorders, meters, etc. This instrument has the possibility to generate and measure signals from ten thermocouples, five thermometer resistances, four voltage ranges, two current ranges, two resistance ranges. Thermoelectric terminals have an internal temperature measurement and for this reason make possible the generation or measurement of thermoelectric signals with the compensation for the given thermocouple. In this working mode, a real thermocouple is added to thermoelectric measuring terminals, and compensation conductors to thermoelectric generating terminals. The calibrator ensures the simultaneous generation of the signal on output terminals and the measurement of the signal on measuring terminals, thanks to this feature the calibrator is suitable to check transducers. The INMEL 60 calibrator enables to check two-wire transducers. the used graphical display contains a lot of information on a screen with a good readability. The display ground-lighting, which can be switched off, is especially useful in conditions of an insufficient lighting. The internal supply from the battery enables the work not only in laboratory conditions but also on the object. The calibrator can also be used to the maintenance and servicing of industrial measuring instruments, systems and electronic equipment. Application: Checking and calibration: - measuring transducers controlled by a voltage or current signal, a thermoelement or resistance thermometer, - two-wire transducers, - temperature meters, - pressure transducers, - manometers, - measuring and control lines.
Technical parameters: - Voltage ranges from 200 V up to 1000 V, - Current ranges from 200 A up to 20 A, - Frequency ranges from 20 Hz up to 100 kHz, - Resistance from 1 up to 19 M, - Voltage accuracy from 35 ppm, - Current accuracy from 150 ppm, - Ample software, - High output load, - RS 232C , IEEE488 interfaces. The INMEL 7000 calibrator is device with very high precision and simultaneously high load, thanks that it pulls ones weight very well with checking modern type as well older types of meters. It is characterized elastic and open systemic structure. We offer varius version of this calibrator from very simple e.g the DC voltage calibrator up to full configuration : DCV, DCI,ACV,ACI and R. Thanks to ergonomic desc and rich internal software the INMEL 7000 calibrator is very handly. In calibrator INMEL 7000 used modern construction solution, in which used new generation of electronics elements of renowned worldwide companies. Thanks that ones received very good metrological parameters, reduced quantity of compnents, and in this way augment the reliability of this calibrator. Application: Checking and calibration: - AC and DC voltmeters, - AC and DC ammeters, - frequency meters, - measuring transducers, - ohmmeters.
Technical parameters: - Voltage ranges 0.2 do 1000 V, - Current ranges od 20 mA do 20 A, - Frequency ranges od 40 Hz do 5000 Hz, - Voltage and current accuracy DC 0.02%, - Voltage and current accuracy AC 0.05%, - Load carrying capacity 40 VA, - Serial interface RS232, USB, Ethernet. The INMEL 1000 calibrator was made on base of modern componenets of microprocessor technologies. Applicated technologies are comparable with technologies used by leading global companies.The INMEL 1000 calibrator characterize oneself the innovative structure of operation in range of output signals and operation of measuring and regulatory loop.For AC course possible is the synchronous operation with the main. This possibility influence on output parameters, reliability, comfort of work, the communication way with user and external devices. The calibrator INMEL 1000 fulfils directives of the European Union within the range safeties and the electromagnetic compatibility:The production of the INMEL 1000 calibrator does not create threats for environment. Application: Checking ang calibration: - AC and DC voltmeters, - AC and DC ammeters, - frequency meters, - measuring transducers.
Parameters: - voltage measure: 0 100mV, 0 10V, - current measure: 0-24 mA, - voltage generation: 0 100 mV, 0 10V, - current generation: 0 24 mA, - voltage accuracy: 0.02% + 2 digits, - current accuracy: 0.015% + 2 digits, - loop power output: 24V Calibrator INMEL 50 integrate generation and measurement function of electric signals, used in automatic industry. The main features of this devices is high accuracy and resolution of generating or measuring signals, friendly operation and large display. Application: Checking and calibration: - measuring transducers, - measuring and control lines, - current loop.
Power and energy calibrators, multifunction calibrator, multifunctional portable calibrator, calibrator.
Hydraulic cylinders, multi piston hydraulic pumps, parts, cup-and-ball bearings.
Hydraulic cylinders, hydraulic valves, hydraulic machines and plants, briquette presses, briquette plants.
Complete equipment for production of socks on machines (subject to prior sale). The factory is completely equipped, still working. 1) Socks machines (working, complete): 1 - mod. L462, cylinder 3 , gauge 14, 1996 2 - mod. L462, cylinder 3, gauge 14, 1996 3 - mod. L462, cylinder 3 gauge 14, 1996 4 - mod. L462, cylinder 3 , gauge 14, 1996 5 - mod. L462, cylinder 3 , , gauge 14, 1997 6 - mod. L462, cylinder 3 , gauge 14, 1997 7 - mod. L472, cylinder 3 , gauge 14, 1996 8 - mod. L472, cylinder 3 , gauge 14,1997 1 - mod. GOAL FL54J, cylinder 4, needle 200, gauge 22, 2004 2 - mod. GOAL FL626, cylinder 3 , needle 156, gauge 14, 2003 3 - mod. GOAL FL726, cylinder 3 , needle 156, gauge 14, 2005 4 - mod. GOAL FL726, cylinder 3 needle 156, gauge 14, 2005 5 - mod. GOAL G726, cylinder 3 , needle 120, gauge 14, 2008 6 - mod. GOAL G726, cylinder 3 needle 156, gauge 14, 2008 7 - mod. GOAL G, cylinder 3 , needle c156, gauge 14, 2005 8 - mod. GOAL G, cylinder 3 , needle 156, gauge 14, 2008 9 - mod. GOAL G, cylinder 3 , needle 156, gauge 14, 2008 10 - mod. GOAL 900, cylinder 4 , needle 84, gauge 14, 1997 1 - mod. BRAVO 842, cylinder 4, needle 200, gauge 14, 1997 2 - mod. BRAVO 842, cylinder 3 needle 188, gauge 16, 1997 3 - mod. BRAVO 853, cylinder 4, needle 176, gauge 14, 1997 4 - mod. BRAVO 853, cylinder 3 , needle 168, gauge 14, 1997 5 - mod. BRAVO 962, cylinder 4 , needle 84, gauge 06, 2008 6 - mod. BRAVO, cylinder 3 , needle 188, gauge 14, 1997 7 - mod. BRAVO, cylinder 3 , needle 188, gauge 14, 1997 1 - mod. FANTASIA ST, cylinder 3 , needle 156, gauge 36, 2003 2 - mod. FANTASIA 2V, cylinder 3 , needle 168, gauge 36, 2003 2) Sewing -ROSSO for sewing tops -3 pcs AUTOLAP YAMATO -JUKI Overlock MO-2504-3 threads -JUKI Overlock MO-2400-4 threads -JUKI Overlock MO-2400-4 threads -PFAFF for labels -KNIFE 1982 yoc 3) Finishing machines: -FRISAN Tumbler (washing, softening) for socks DRY-SOFT 33 mod. DS-33, max press. 4kg -Socks boarding/stabilising machine FIRSAN mod. F-830, yoc 2000, with 8 forms; Capacity: ca. 50-80.000 pcs of socks per month.
Integrated with SpO2 pulse Oximeter available in Poland (Warsaw and Lodz). The main measurement indexes of the oximeter are pulse rate, blood oxygen saturation, and perfusion index (PI) On stock: 22 000 Test hemoglobin saturation and pulse Display: OLED Sound adjustment Alarm setting Low battery indicator Automatic shutdown Infrared measurement method 4 adjustable directions Color: blue
Kontra 450 RC boat for RESCUE/FIREFIGHTING RESCUE/LIFEGUARD purposes TECHNICAL SPECIFICATION: â?¢ The boat is CE certified by Polish Registry Office (PRS) for C/D categories; â?¢ Capacity: C-6 persons COASTAL WATERS /D-10 persons INLAND WATERS; â?¢ Total length: 4.50 m; â?¢ External width: 1.90 m; â?¢ Height: 1.00 m; â?¢ Length in waterline: 4.00 m; â?¢ Width in waterline: 1.80 m; â?¢ Freeboard at the max load limit: 0.30 m; â?¢ Weight: 180 kg; â?¢ Max capacity: 1000 kg; â?¢ Max engine power: 59,18HP = 59,18PS = 60 KM = 44,13kW â?¢ Hull material: LDPE; â?¢ Hull construction: 2-sections closed; â?¢ Technology rotation moulding. COLOR OPTIONS: Wide range of color is available PACKAGE EQUIPMENT OF KONTRA 450RC: 1 Kontra 450 R hull + steel railings, three bow lockers, steel transom, two bow cleats, bilge plug. 2 Side lockers Kontra 450RC (3pcs.) 3 Steering console with a wheel, gear, steering system and lighter socket 4 Seat with an adjustable base Kontra 450RC (1pc) 5 Folding lader 6 Paddle with boat-hook 7 Navigation frame with lifebuoy holder, navigation lights, main switch, floor lights (2pcs.) and switchboard 8 Folding cleat (2pcs) 9 Mooring ear shackle 10 R1 Rescue Kit holder 11 Horizontal light 12V 12 LED beam 72W (24 x 3W) 41cm (white light) 13 Working lights (2pcs) 14 Signal beam 60 cm (blue lights) 15 Sound generator with speaker 16 Battery 80Ah 17 Battery cover 18 Rescue-buoy 19 Lifebuoy 20 Fire extinguisher with a handle 21 Technical Kit with tools 22 Waterproof first aid kit 23 Pocket for orthopedic board 24 Orthopedic board 25 Mooring rope with 12mm diameter and 20m length 26 Tug rope with 12mm diameter and 20m length 27 Anchor rope with 12mm diameter and 20m length 28 Soft fender with line (4pcs.) 29 Bilige pump with covering 30 A windschield in the frame with fixing clips 31 Life rope 32 Fuel tank 40 l 33 Boat lettering (2 sides) 34 Electrical installation for engine and navigation frame with main switch and switchboard On customer request OPTIONS available (not included into the price): Engine: YAMAHA, HONDA, EVINRUDE, MARCURY Boat trailer: ( LED lightening, shock absorbers, gangway to launch the boat, manual winch system with locking, middle rollers, skids 2 pcs, transport belts) Echosounder Radiotelephone
Animax Horse - product description Animax Horse toilet bedding in the form of straw pellets is dedicated especially for horses. It was produced in 100% from carefully selected wheat and rye straw. Due to the high temperature generated during the production process (above 80 C), bacteria, fungi (including mold) and other pathogens contained in the raw material are destroyed. Our product is subjected to cyclical tests by the Accredited Veterinary Laboratory. The impressive absorption properties of Animax pellets of up to 400% (by weight) allow you to reduce the need for frequent replacement of the substrate in the boxes. Our product is 100% natural and 100% composted. An additional advantage is that it effectively absorbs the smell of ammonia. Product characteristics: helps in precise control of food, because horses do not eat ballast (do not treat it as food) â?¢ suitable ground for stables and portable boxes taking up much less space than standard straw â?¢ effectively absorbs the irritating odor of ammonia, taking care of the animal's respiratory system and the comfort of being in the stable high absorbency up to 400% liquid (in relation to weight) protects horse's hooves against contact with excess moisture high efficiency reduces the frequency of substrate replacement in the box to 15-20 weeks free of bacteria, mold, fungi and other pathogens significantly affects animal health ensures a high standard of hygiene especially important in breeding animals suffering from respiratory diseases and allergies convenient and easy to use, it significantly reduces the time spent on cleaning boxes â?¢ provides good insulation from the ground, helping to maintain the right temperatur�? Fraction: pellets fi 6 mm, crushed Packaging variants: loose, big-bag, 15 kg bag Raw material: wheat and rye straw Bedding and feed products are produced in the HACCP production regime under the control of the Veterinary Inspection
Covid 19 test kits.
Taped Protective coveralls provide protection against hazardous dust. It is favorable for use in many enviroments thanks to its nonwowen type. It is covered with lamination for extra strong protection against liquids. It is suitable for use in cleaning processes, production areas containing cement, metal grinding and polishing, light industrial cleaning and machine maintenance, storage, allocation and building maintenance works, printing sector, pharmaceutical processes, bug spray. Description: Protective Coverrals (Taped) Material: 55 gsm PP+PE Packing: 1 Piece in Each Package, 60 pcs in Each Carton Box Standarts: EN 14605:2005+A1:2009 (Type 3B, 4B), EN 13982-1(Type 5), EN 13034 (Type 6), EN 1073-2, EN 1149-5, EN 14126 Color: White
A medical gown is typically used in a hospital or clinic environment where you might be exposed to microorganisms and particulate matter in a sterile environment. The medical gown is designed to protect personal and patients from the transfer of the microorganisms and particulate material in a medical environment. Breathable/Fluid Repellent/Impervious Soft and comfortable disposable medical gowns; for single use only; made from non woven material for fluid resistance; each gown is packed in one sealed pouch. Description: Medical Disposable Gown Material: 30 - 40 - 55 gs; SS/SMS/SSMMS + PE Style: Long Sleeve, Round Neck, Elastic or Knotted Cuff Standarts: HS CODE : 6210.10.92.00.00; AAMI PB 70 (Level 1-2-3-4); CE Certificate & FDA, ISO 13485 Color: Blue or White Gowns 40 gsm SS- 1,5$. Gowns SMS- 40 gsm- 1,6$. Gowns 55 gsm SSMMS+PE- 1,8$.
