Product Usage: It can be connected with a flask, condenser, separating funnel, etc. to form a distillation and separation device (such as a hydrogen fluoride distillation device) It has good airtightness and can also be used as a sample reaction tank, or to collect samples at the end of the reaction experiment. Cans without welded double necks can be used to clean small utensils such as sample dissolving tanks. Applicable industries: Semiconductor industry, isotope analysis, heavy metal industry, geochemistry... other products: PFA beaker, PFA reagent bottle, PFA drop bottle, PFA sample dissolution tank, PFA scrubber bottle, PFA drop bottle... FEP experimental utensils, PTFE experimental utensils, digestion apparatus, acid removal apparatus, acid purification system...
PFA purification system: 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
1 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The Teflon series PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2 Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to+260 ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
1 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The Teflon series PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2ã?? Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to+260 ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
1. Product introduction The polytetrafluoro (PFA) beakers produced by our factory can be used for trace analysis, isotope analysis and other experiments, and are suitable for ICP-MS laboratories. Applicable to semiconductor, polysilicon, photovoltaic electronics and lithium battery industries. The cup body has clear markings for easy observation, and the pointed spout makes it easy to pour the solution. 2. Product features: 1. Transparent, with raised scales, chemical resistance and heat resistance, resistant to various chemical solvents such as acids and alkalis, HF and organic solvents; suitable for preserving chemicals and samples; 2. Can be autoclaved at 121 (2 bar), in compliance with DIN EN 285. The flanged design facilitates clamping and movement, dissipating heat and increasing mechanical strength; there is a mouth on the edge for easy pouring of liquids; the use of high-purity raw materials makes it easy to clean, and can be used with our company's electric heating plates and digesters 3. High thermal stability, good transparency and smooth surface; 4. It is often used as a reaction vessel for preparing dissolved substances and smaller amounts of substances at room temperature or under heating; 5. Low precipitation: low metal ion dissolution and precipitation, it is a container for storing standard substances, corrosive and pure reagents; 6. High and low temperature resistance: operating temperature -200~+260; no memory effect; 7. Anti-pollution: low metal elements have low blank values; 8. It is suitable for laboratories such as trace and ultra-trace analysis and isotope analysis. It is a clean experimental analysis vessel; 9. Comply with the requirements of laboratories or testing institutions, as well as medical testing, trace testing, etc. for experimental equipment, for trace analysis and containing high-purity organic solvents (for example: high-purity water, HF, acetone and other organic solvents, etc.); 3. PFA series products: Reagent bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products.
Advantages: Excellent Corrosion Resistance: It is coated with Teflon, a high-quality anticorrosive material, making it resistant to strong acids and alkalis. This ensures long-term stable operation of the equipment. Fast Heating Speed: The anti-corrosive cast aluminum hotplate has a rapid heating speed, which can quickly increase the temperature of the digestion solution and shorten the sample processing time. No Cross-Contamination: It allows for the simultaneous processing of multiple samples without causing cross-contamination. Reduced Metal Components: The DBF-type electric hotplate's supports are made entirely of polytetrafluoroethylene (PTFE), significantly reducing the entry of metal parts into the laboratory. Customizable Features: It offers customizable time-setting functions, segmented temperature control, and can be processed with different board surfaces according to requirements. Intuitive Display and Safety Functions: The liquid crystal display (LCD) offers features such as buzzer alarms and automatic power-off for added safety. Easy Operation and Maintenance: The anticorrosive electric hotplate has a simple structure, making it easy to operate and maintain. Energy Efficiency and Environmental Friendliness: Compared to traditional heating methods, it has higher energy utilization efficiency, reducing energy consumption and environmental pollution. In summary, the anticorrosive electric hotplate from Nanjing Binzhenghong Instrument Co., Ltd. offers superior performance in terms of corrosion resistance, heating speed, safety, and energy efficiency, making it an excellent choice for various laboratory applications.
1. Product introduction The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning flower baskets or wafer cassettes with chip silicon cells. Due to the characteristics of PFA, it can withstand the corrosiveness of cleaning solutions. At the same time, it has a low blank value of metal elements, no dissolution or precipitation, and will not contaminate chip wafers. Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination. 2. Features: 1. The appearance is translucent, making it easy to observe the reagents in the tank; 2. High and low temperature resistance: -200ï½?+260â?? 3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents; 4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb; 6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.; 8. Stable chemical properties, good recoverability, and not easy to deform; 9. Teflon plastic, durable and not fragile.
PFA acid purification system: 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
PFA acid purifier 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
DBF temperature-controlled electric hot plate, also known as anti-corrosion electric hot plate, has a Teflon-coated non-stick surface and is not affected by strong acids and alkalis. It is an electric hot plate used for sample heating, digestion, evaporation, boiling and acid removal experiments. It can be used with our Teflon series such as beakers, crucibles, digestion tubes, sample dissolving tanks, digestion tank inner cups, etc., and the effect is good. It can meet the reagent heating needs of chemical laboratories in different industries such as physics, chemistry, biology, environmental protection, pharmaceuticals, food, beverages, teaching, and scientific research. Technical parameters of anti-corrosion electric heating plate Model: DBF type Operating area (mm): 600 * 400mm, 400 * 300mm, 500 * 250mm, 450 * 350mm, etc Heating method: Electric heating PID digital display Working temperature: 220 Temperature control accuracy: ± 1 Surface anti-corrosion of heating plate: PFA coating Heating plate material: exquisite aluminum alloy/graphite Rated voltage: 220V (adjustable according to region) Continuous working time:>48 hours Supporting products: Crucible/beaker/PFA vials characteristic: 1. PFA Teflon coating, anti-corrosion cast aluminum heating plate heats up quickly; 2. The board and the control box can be made into two parts, so that the acid mist during the experiment will not corrode the components in the control box, thereby increasing the service life and processing multiple samples at the same time without cross-contamination; 3. Customizable time setting function and segmented temperature control; 4. The exposed part of the power cord is wrapped with PFA tubes to further prevent acid gas from corroding components;
The PFA pipette tips offered by Nanjing Binzhenghong Instrument Co., Ltd. possess numerous advantages that make them an excellent choice for various applications. Here are some of the key benefits: Advantages: 1.Excellent Chemical Resistance: The PFA pipette tips exhibit remarkable chemical stability, resisting corrosion from harsh chemicals like acids, bases, and organic solvents. This ensures consistent performance and accuracy in demanding laboratory environments. 2.Wide Temperature Range: These pipette tips can withstand a broad temperature range from -200°C to 260°C, making them suitable for both low- and high-temperature applications. 3.High Precision and Accuracy: The PFA pipette tips offer precise and accurate dispensing of liquids, ensuring consistent and reliable results in laboratory experiments. 4.Low Background Values: With low metal element content (such as lead and uranium) of less than 0.01ppb, these pipette tips are suitable for high-sensitivity analytical techniques like ICP-MS and trace analysis. 5.Customizable Options: The pipette tips are available in different sizes and can be customized to fit various pipette models, meeting the specific needs of different laboratories. Durable and Reusable: The excellent stability of PFA material allows these pipette tips to be used repeatedly over a long period, reducing the need for frequent replacements and saving costs. 6.Easy to Clean: The smooth surface and precise manufacturing of these pipette tips ensure easy cleaning and minimal residue, maintaining the accuracy and reliability of the tips. 7.Transparent and Easy to Observe: The transparent design allows users to easily observe the liquid level inside the pipette tip, making it convenient for accurate dispensing. In summary, the PFA pipette tips from Nanjing Binzhenghong Instrument Co., Ltd. are an excellent choice for laboratories requiring high chemical resistance, precision, and accuracy in liquid handling applications.
Advantages: 1.Excellent Chemical Resistance: The PFA material exhibits remarkable resistance to strong acids, strong bases, aqua regia, hydrofluoric acid, and various organic solvents. This ensures that the columns can withstand complex chemical environments and maintain their integrity and performance. 2.Wide Temperature Range: The PFA chromatography columns can operate within a broad temperature range, typically from -200�°C to +260�°C. This flexibility allows for their use in a variety of experimental conditions. 3.Low Background Contamination: With metal element contents such as lead and uranium below 0.01ppb, the PFA chromatography columns minimize contamination of samples, ensuring accurate results. 4.Stable Chemical Properties: The PFA material exhibits stable chemical properties, resisting dissolution or leaching, thus maintaining the purity of samples. 5.Good Elastic Recovery: The PFA material possesses good elastic recovery ability, resisting deformation or damage due to external forces. 6.Visual Transparency: The transparent PFA column body allows for direct observation of sample conditions inside the column, enabling intuitive operation and control. 7.Customization Options: Nanjing Binzhenghong offers customization options for PFA chromatography columns, including different capacities, diameters, lengths, and even customized sieve plates to meet specific experimental requirements. 8.Versatile Applications: These PFA chromatography columns find applications in various industries, including semiconductor manufacturing, biochemistry, and environmental monitoring, due to their ability to separate and purify a wide range of chemicals and materials. In summary, the PFA chromatography columns from Nanjing Binzhenghong Instrument Co., Ltd. are characterized by their superior chemical resistance, wide temperature range, low contamination, stable chemical properties, good elastic recovery, visual transparency, customization options, and versatility in applications. These advantages make them an ideal choice for laboratory research and industrial applications
Technical Parameters Product name: PFA reagent bottle Specifications (ml): 30/60/100/250/500/1000/2000/3000/4000/5000 Material: PFA Withstand temperature: -196-260â?? Product Features 1. Translucent appearance; 2. Temperature resistance: operating temperature -200~+260â??; 3. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 4. Anti-pollution: low metal element value; 5. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents; use: 1. Suitable for storing and packaging different chemical reagents and standard samples; 2. Applicable to semiconductor, polysilicon, photovoltaic electronic lithium battery industries; sampling of high-purity water, electronic pure reagents, photoresist, silicon wafer washing liquid, electronic grade cleaning agent, liquid crystal liquid, circuit board washing liquid, etc.; also suitable for new materials and new Storage and use of energy such as silicon materials; 3. Can be used with Agilent, Shimadzu, PE, Thermo Fisher and other brands of ICP-MS, ICP-OES and other instruments for trace analysis and isotope analysis. Our PFA series products: Sample storage bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products
1. Product introduction PFA, also known as soluble polytetrafluoroethylene and Teflon, can be used for trace analysis, isotope detection, ICP-MS/OES/AAS analysis and other experiments. Capacity (ml):5/10/25/30/50/100/200/250/500/1000/2000 2. Product characteristics 1. Strong corrosion resistance: PFA material has excellent acid and alkali resistance and can be used for measuring various chemical liquids without being corroded. 2. High transparency: The transparency of PFA material is relatively high, and the volume of the liquid can be clearly observed. 3. High accuracy: PFA measuring cylinder has precise graduation lines, which can provide accurate liquid volume measurement results. 4. Good heat resistance: PFA material can withstand high temperatures, so it is suitable for some experiments that need to be conducted under high temperature conditions. 5. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 6. Anti-pollution: low metal element value; 7. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents; 3. PFA series products: Sample bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes, etc.
Advantages: 1.Excellent Chemical Resistance: The PFA pipette tips exhibit remarkable chemical stability, resisting corrosion from harsh chemicals like acids, bases, and organic solvents. This ensures consistent performance and accuracy in demanding laboratory environments. 2.Wide Temperature Range: These pipette tips can withstand a broad temperature range from -200�°C to 260�°C, making them suitable for both low- and high-temperature applications. 3.High Precision and Accuracy: The PFA pipette tips offer precise and accurate dispensing of liquids, ensuring consistent and reliable results in laboratory experiments. 4.Low Background Values: With low metal element content (such as lead and uranium) of less than 0.01ppb, these pipette tips are suitable for high-sensitivity analytical techniques like ICP-MS and trace analysis. 5.Customizable Options: The pipette tips are available in different sizes and can be customized to fit various pipette models, meeting the specific needs of different laboratories. Durable and Reusable: The excellent stability of PFA material allows these pipette tips to be used repeatedly over a long period, reducing the need for frequent replacements and saving costs. 6.Easy to Clean: The smooth surface and precise manufacturing of these pipette tips ensure easy cleaning and minimal residue, maintaining the accuracy and reliability of the tips. 7.Transparent and Easy to Observe: The transparent design allows users to easily observe the liquid level inside the pipette tip, making it convenient for accurate dispensing. In summary, the PFA pipette tips from Nanjing Binzhenghong Instrument Co., Ltd. are an excellent choice for laboratories requiring high chemical resistance, precision, and accuracy in liquid handling applications.
Properties of PFA: 1. Translucent appearance, smooth inner wall, no water hanging on, easy to clean; 2. Temperature resistance: operating temperature -200~+260â??; 3. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 4. Anti-pollution: low metal element value; The PFA condensation filter column is an important device used in gas reactions. Its main function is to purify the reaction gas and remove impurities in it. The role of the PFA condensation filter column in gas reactions will be introduced in detail below. 1. Condensation of reaction gases In many gas reactions, the gas produced by the reaction often needs to be condensed before it can be purified and utilized. The PFA condensation filter column uses external cooling to cool the reaction gas and condense it. During this process, the PFA material has excellent chemical stability and high temperature tolerance, and can withstand gas reaction conditions of high temperature and high pressure. 2. Filter impurities in the reaction gas During the reaction process, some impurities are often produced in the gas, which will affect the success or failure of the reaction. Sometimes toxic or harmful substances will remain in the reacted gas, which needs to be filtered and purified. The filter elements in the PFA condensation filter column can effectively remove impurities in the reaction gas and improve the gas purity, thus ensuring the accuracy, effectiveness and repeatability of the reaction. 3. Protect downstream equipment Before the reaction, we need to process the reaction gas through a PFA condensation filter column to ensure that the reactants are not contaminated in subsequent equipment. At the same time, the filter column can also effectively prevent impurities in the reaction gas from causing corrosion or damage to downstream equipment, so the use of condensation filter columns is also a protection mechanism for downstream equipment. In short, the PFA condensation filter column plays a very important role in gas reactions, and can play multiple roles such as condensation, purification, and protection of downstream equipment. In practical applications, it is necessary to fully consider the gas reaction conditions and the performance of the filter column, and select a suitable condensation filter column to complete the reaction.
Product Features 1. The appearance is translucent, visible and easy to observe. 2. High and low temperature resistance: -200 +260 3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, hydrofluoric acid and various organic solvents 4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency 5. Pure and pollution-free: low metal element blank value (lead and uranium content less than 0.01ppb) PFA implinger, with its unique PFA material, has brought unprecedented performance breakthroughs to the laboratory. PFA is an outstanding fluoroplastic that combines high corrosion resistance, high temperature resistance, and impact resistance to ensure stability in various harsh experimental environments. Its excellent corrosion resistance allows PFA implingers to easily cope with the erosion of various strong acids, strong alkali and organic solvents, and can still maintain its original performance after long-term use. At the same time, its excellent high temperature resistance also allows it to maintain stable chemical properties in high temperature environments and will not produce harmful substances due to temperature changes. In addition, PFA implinger also have excellent impact resistance and can withstand the strong impact and vibration generated during the experiment, ensuring the safety and stability of the experiment. Its high transparency design allows the experimenter to clearly observe the experimental process, whether it is color change, precipitation generation or gas release, all can be seen at a glance. Made in China
product description: PFA, also known as Teflon, can be used for trace analysis, isotope detection, ICP-MS/OES/AAS analysis and other experiments. product features: 1. Seamless one-piece mold production technology, the product has stable performance and long service life; 2. Temperature resistance: The operating temperature is -200~+260â??. It can maintain its mechanical strength within a large temperature difference: from low temperature to high temperature, PFA can maintain its flexibility without losing toughness. Like PTFE, it is a carbon ammonia polymerization. Continuous use temperature of the object. 3. Easy to clean: PFA itself is non-stick and has the ability to waterproof, oil and other substances. The surface is flat and smooth without any scratches. It is easy to clean during use. 4. Threaded port, excellent sealing, no air leakage; can be coded 5. Anti-pollution: low blank value of metal elements; Parameters, usage Product name: PFA buffer bottle, reaction bottle, double-neck reaction impact bottle Material: PFA Specifications: 60.90.120.150.180.375m1 Temperature resistance range:-200-260C The lid is equipped with a 1/4 pipe. The pipe directly passes through the lid and is introduced into the body. It is convenient and flexible and can be used for buffer reaction experiments. scenes to be used: Semiconductor, chemical industry, biopharmaceutical, new energy industry. PFA series products: Reagent bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, flasks, dissolved samples, micro columns, crucibles, valves, joints, delivery pipes, etc.
1. Product introduction: The appearance of the PFA Erlenmeyer flask is in the shape of a flat-bottomed cone, wide at the bottom and narrow at the top. It has a cylindrical neck and an opening wider than the neck at the top, which can be closed with a stopper. PFA Erlenmeyer flask is also called PFA reaction flask, , PFA Olenmayer flask, etc. It is a metal-free fluororesin Erlenmeyer flask with excellent chemical resistance and heat resistance. Suitable for micro analysis, trace analysis, ultra-trace analysis ICP-MS/OES/AAS analysis and other experiments. 2. Technical parameters Product name: PFA Erlenmeyer flask Specifications (ml): 125/250/500ml Material: PFA Withstand temperature: -200~+260â?? 3. Product characteristics A. High temperature resistance: operating temperature reaches 260�°C; B. Low temperature resistance: It has good mechanical toughness; even if the temperature drops to -196�°C, it can maintain an elongation of 5%; C. Corrosion resistance: It is inert to most chemical solvents, resistant to acids and alkali, water and various organic solvents; D. Aging resistance: has the best aging life among plastics; E. High lubrication: It is a solid material with a low friction coefficient; F. Non-adhesion: It is the smaller surface tension in solid materials; G. There are two options: threaded port and sealing plug. 4. Purpose: It has a large specific gravity and good heat resistance, so it can be heated in a water bath or oil bath. It can be equipped with a shaker oscillator for experiments. 5. Our PFA series products: Sample storage bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products.
WE SELL IRON 62% PURITY FOB COLIMA MEXICO 68 USD
