Urea has the highest nitrogen content of all solid nitrogenous fertilizers in common use. It is widely used in fertilizers and is an important raw material for the chemical industry. The Laira Group is customer-oriented which is active in the supplying of Urea to local and international markets. Laira has an experienced team in charge of our material development, including its distribution to gain credit through paying attention to all its customersâ?? needs and preferences in terms of shape (Prilled or Granular), packing (50KG bags, bulk or jumbo bags).
Halagel Toothpaste Herbal blast with Rock Salt, Miswak, Neem and Clove Oil has the ability to neutralise the PH level within an accidic mouth. This creates a more hygenic environment within a person's oral cavity and supresses the sulphur content that attributes to bad breath.
We can supply the good quality steam coal one of the countries in the world that produce various GAR/GCV of Coal. We supply the various steam coal start From 4000 up to 6000 GAR/GCV The steam coal consisting of a high value of calories, low level of ash, less moisture, low percentage of Sulphur
ACTUAL PARAMETERS PROXIMATE ANALYSIS NAR 5484 Thermal Coal NET CALORIFIC VALUE BASIS (AR BASIS) 5484 KCAL / KG Total Moisture (ARB) 10.9 % Inherent Moisture (ADB) 3.4 % Ash (ADB) 20.2 % Volatile Matter (ADB) 27.2 % Sulphur (ADB) 0.49 % HGI 49 AFT IDT 1380 degree C Size 0 50 MM 95.3 % Commodites : Thermal Coal, Origin Newcastle Australia. FOB Newcastle. Qty 840.000 tons.
EPDM denotes a terpolymer based on three monomers: ethylene, propylene and a non-conjugated diene; EPDM grades have a residual unsaturation in the side chains and can therefore be cured with sulphur and accelerators. EPM represents a copolymer from ethylene and propylene monomers; EPM is entirely saturated and therefore requires vulcanization by radiation or products that release free radicals, such as organic peroxides. Its heat resistance is distinctly better than that of Natural Rubber, SBR and Butadiene Rubber. The molecules of both EPM and EPDM have a completely saturated hydrocarbon backbone, through which excellent ozone resistance and very good resistance to heat and oxidation are achieved. Oil Extended and Non-Oil types of EPDM in the shapes of Prime, Near to Prime and Off Grades can be supplied
PALM KERNEL SHELL/COCONUT SHELL Commodity: Palm Kernel Shell Gross caloric value: 4200-4600,5000-7800KCAL/KG Sulphur, maximum 0, 04% Density : 1.1g /cm3 Moisture : 11 - 15% Ash content: 1.5 -3% max Humidity, maximum 17% Packing:25-50kg/Bags and 500-1000kg/Jumbo Bags Element Analysis (wt %) Moisture 13% to 18% (Maximum) fiber 2% to 3% (Maximum) Foreign Matter 2% (Maximum) Hard Nut Shell 95% Kcal 3500 to 4000 Size :4-20mm Industry analysis (wt %) Carbon (C) 52.95 Hydrogen(H) 6.29 Nitrogen (N) 0.52 Oxygen (O) 38.51 Sulphur(S) 0.07 Parameter Unit Result: Total Moisture (ARB) 15 - 20% (max 22% due to rain) Ash content (ADB) 15.8GJ/MT Particle size
Mexico iron ore 65%fe Specifications : fe : 65% rejection below 64% Ai203 : 0.70% 2.5% max rejection over 3.0% Sio2 : 2.50% 3.5% max rejection over 4.5% Sulphur : 0.005% 0.03% max rejection over 0.05% Phosphorus : 0.02% 0.08% max rejection over 0.10% Physical characteristics Below 0.15 mm 25% max. 0 - 10 mm 95 % min. 10mm 5% max Moisture 8% max at 105 degrees centigrade Quantity : 50, 000 mt / month ( 10% more or less ) Delivery : china port Contractual term : 12 months / one year Loading port : mexico port Price : usd 67.00 cnf Price revision : every three months Payment : after the buyer receipt the copy of bill of lading for the shipment. The buyer will open an irrevocable letter of credit for the total value within two bank working days. Lc will be irrevocable & 95% at sight. The remaining 5% of lc value will be remited after cargo arrive the destination port Inspection : sgs at loading port , cost to seller Ciq at discharging port, cost to buyer Bulk
Fuel oil Roduct: fuel oil (cst180) Origin: uae Quantity: 450, 000 mt per month. Duration: 12 months with possible extension. Delivery: cif to chinese port. Specifications: Item guaranteed test method Density 20 deus 0.86-0.88 astm d-4052 Kinematics viscosity 40 deg max.160 astm d-445 Celsius (cst) Flash point (coc) deg celsius min. 66 astm d-93 Pour point deg celsius < 6 astm d-97 Conradson carbon wt% < 0.5 astm d-4530 Ash wt% < 0.01 astm d-482 Color astm 1.5 v 3.0 astm d-1500 Sulphur content wt% < 1.0 ip 242 Distillation (dist 90%) 370 v 390 astm d-86 Mechanical impurity < 0.1 astm d Water content vol% < 1.0 astm d-95 (e.D.Point) 420 v 440
Stem Coal No. Parameter Typical Specification Rejection 1. Total Moisture(ARB) 7.14% 9% 2. Inherent Moisture(ADB) 5.24% - 3. Volatile Matter(ADB) 38.92% - 4. Sulphur(ADB) 0.41% 1.0% 5. Ash Content(ADB) 1.79% 3% 6. Fixed Carbon(ADB) 54.05% - 7. Gross Calorific Value(ARB) 7,136 kcal/kg
Exporting Wood Pellet from Malaysia to worldwide. Wood Pellet Analysis Report Total Moisture ARB 3.2 Inherent Moisture ADB 2.8 Ash ADB 0.8 Total Sulphur ADB 0.17 Chlorine ADB 0.06 Gross Calorific Value ADB 4407 Kcal kg Bulk Density ARB 694 kgm3 Note ARB As Received Basis & ADB Air Dried Basis Pack in Jumbo Bags. @ FOB Price USD 185.00 Per M/Tons
SPECIFICATION: High Purity Grade A 99.9% to 99.99% scrap copper wire with diameter of 0.30mm, 0.25mm,0.20mm. Clean (free from any insulation), uncoated, untinned, unalloyed copper wire, brittle, & free of burnt. Chemical Composition: Element: (%) Copper : 99.90% min Lead: 0.005% Max Bismuth: 0.03% Max Carbon: 0.03% Max Iron: 0.005% Max Zinc: 0.003% Cobalt:
Specifications:- 1)Origin:Russia 2)Ash Content,not more %: 0.1 3)Mass fraction of sulphur,not more % -low-sulphur-residual-oil :0.5 4)Temperature of the flash,not less °C in the closed crucible in the open crucible °C :110 min 5)The temperature of solidification,not higher °C :25 6)Kinematics viscosity at 50°C: 118 max 7)Water Content: 0.5% 8)Mechanical Impurities:Lower than 0.1% 9)Acidity:Lower than 5mg KOH/100 ml 10)Gross Calorific value Kcal/kg/KJ/kg: Min 9200/41300 11)Density at 15.0 deg. C kg/l: 0.880-0.9200 12)Hydrogen sulfide content (H2S)pom:0.5 max 13)Carbon Residua:Lower than 7% 14)Vanadium (V) ppm : 30% MAX 15)Aluminium (Al) ppm : 5 16)Silikon (Si) ppm :12 17)Nickel ((NI) ppm :49 18)Asphaltenes :/ :3.6% 50,000-250,000 MT/month with roll for extension 100-75x50mmx75cm Tanks
Used Cooking Oil (UCO) Filtered, un-processed Malaysia FFA 5.0% Max, Moisture and Impurities: 2.0% Max, Unsaponifiable: 1.0% Max, Iodine Value: 50 Min, Phosphorus: 40 ppm Max, Sulphur: 40 ppm Max Available: up to 200 MT/month Packaging: 20-22 MT/flexibag, in 20ft container Delivery: FOB Malaysia Port Klang, or CIF (freight at cost) Payment: TT Wire Transfer; 50% on order, 50% at readiness of containers, before shipment Delivery time: container at Loading port within 10 days from down payment Inspection: Manufacturer's Lab Certifications: n/a MOQ: 3x20ft containers (60MT approx)
Colour: MAX. 45 Icumsa Origin: Brazil Polarization: MIN. 99.8 % Degree Polarization (0Z) Moisture: MAX. 0.04 % by weight Conductivity Ash: MAX. 0.10% by weight Invert Sugar: MAX. 0.10 % by weight Average Size: 0.60 - 0.90 mm. Target M.A: 1.00 �± 1.50 mm. Sediments: MAX. 0.02% by weight Arsenic: MAX. 0.50mg/kg Lead: MAX. 0.50mg/kg Copper: MAX. 1.50mg/kg Pesticide: NONE Sulphur Doixide: NONE Pathogenic Bacteria: NONE Coli-form Bacteria: MAX. 10 CFU/10 GM E. Coli: NONE Yeast & Mold: MAX. 10 CFU/10 GM About Icumsa Sugar 45 Icumsa 45 sugar, known today as white sugar, is one of the most sought after by sugar importers worldwide, due to its purity and brightness. As the highest quality sugar available on the market today, ICUMSA 45 sugar has a sparkling white color and is highly refined, suitable for human consumption and use in a wide range of food products. In addition, it has a high demand due to the fact that it is safer, since its refining process removes bacteria and contaminants present in raw sugars.
Biodiesel BD100 from jatropha oil with ISCC, EN14214 compliance. Specification Typical Values Ester Content, % m/m 96.5 Min Density at 15 oC, kg/m3 860-900 Flash Point, PMCC, oC 101 Min Sulphur, mg/kg 10 Max Sulfated Ash, % mass 0.02 Max Water Content, mg/kg 500 Max Acid Value, mg KOH/g 0.5 Max Iodine Value, %I2 120 Max
Crude Degummed Rapeseed Oil Specification Parameter Method LIMIT VALUE Density (at 150 C) DIN EN ISO 3675 900 -930 kg/m3 Flash point by P. -M DIN EN ISO 2719 Min. 220 C Cinematic viscosity (400 C) DIN EN ISO 3104 Max. 36,0 mm2/s Calorific value, lower DIN 51900 -1, -2, -3 Min. 36000 kJ/kg Cetane Number (DCN) IP 498/ DIN EN 15195 Min. 39 Carbon Residue Mass DIN EN ISO 10370 Max. 0,40 n.C. % lodine value DIN EN ISO 14111 95- 125 g Jod/1009 Sulphur content DIN EN ISO 20884 Max. 10 mg/kg Total Contamination DIN EN 12882 Max. 24 mg/kg Erucic Acid value DIN EN 14104 Max. 2,0 mg KOH/g Oxidation stability 1100 C DIN EN 14112 Min. 6,0 h Phosphorus content DIN EN 14107 Max. 12 mg/kg Saponification Value DIN EN 51559 170- 179 Unsaponification Matter USP 24 Max. 1.5 % Earth alkali content (Ca+Mg) E DIN EN 14838 Max. 20 mg/kg Oxid Ash content DIN EN ISO 6245 Max. 0,01 Water content K.-F. DIN EN ISO 12937 Max. 750 mg/kg
ITEM STANDARD Free fatty acids 3 % Max M.I.U(Moisture and Impurities) 0.1 % max Saponification value: 18185-1955-195 Iodine value: 120 Titre C (melting point) 13.75 'C Specific Gravity @ 25'C 0.915 Density (kg/m3) 920 Flashpoint by P.-M. (Degree C) 220 Calorific Value (kj/kg) 36,000 Kinematic Viscosity (40 deg.C) (mm2/s) Carbon Residue (mass-%) 0.4 Sulphur Content (mg/kg) 18 Contamination (mg/kg) 24 Acid Value (mg KOH)/g) 7.0 Oxidation Stability (110 deg.C)(h) 5.0 (min) Phosphorus Content (mg/kg) 15 Ash Content (mass %) 0.01
ITEM STANDARD Free fatty acids 3 % Max M.I.U(Moisture and Impurities) 0.1 % max Saponification value: 18185-1955-195 Iodine value: 120 Titre C (melting point) 13.75 'C Specific Gravity @ 25'C 0.915 Density (kg/m3) 920 Flashpoint by P.-M. (Degree C) 220 Calorific Value (kj/kg) 36,000 Kinematic Viscosity (40 deg.C) (mm2/s) Carbon Residue (mass-%) 0.4 Sulphur Content (mg/kg) 18 Contamination (mg/kg) 24 Acid Value (mg KOH)/g) 7.0 Oxidation Stability (110 deg.C)(h) 5.0 (min) Phosphorus Content (mg/kg) 15 Ash Content (mass %) 0.01
ITEM STANDARD Free fatty acids 3 % Max M.I.U(Moisture and Impurities) 0.1 % max Saponification value: 18185-1955-195 Iodine value: 120 Titre C (melting point) 13.75 'C Specific Gravity @ 25'C 0.915 Density (kg/m3) 920 Flashpoint by P.-M. (Degree C) 220 Calorific Value (kj/kg) 36,000 Kinematic Viscosity (40 deg.C) (mm2/s) Carbon Residue (mass-%) 0.4 Sulphur Content (mg/kg) 18 Contamination (mg/kg) 24 Acid Value (mg KOH)/g) 7.0 Oxidation Stability (110 deg.C)(h) 5.0 (min) Phosphorus Content (mg/kg) 15 Ash Content (mass %) 0.01
PRODUCT INFORMATION ORIGIN: KAZAHKSTAN SPECIFICATIONS: EN590 (10PPM) ULTRA LOW SULPHUR DIESEL TOTAL QUANTITY: 100,000 MT TRIAL CONTRACT QUANTITY: 100,000 MT X 12 MONTHS WITH ROLL AND EXTENSION TERM: FOB (TTO) PRICE: USD460/MT MODE OF PAYMENT: MT103 TT LOADING PORT : JURONG PORT, SINGAPORE INSPECTION: SGS, CIQ OR SIMILAR BY BUYER *note: If buyer agreed with the FOB price, please forward LOI (Letter of Intent) together with POF/BCL(Bank Confirmation Letter) for Trial Quantity amount and e-mail .*This offer is first come first serve basis.