Machinery pump, winches and cranes, electrical/pneumatic instrumentation, monitoring equipments - ODM system, oil mist detector, 15ppm, navigation ship control system, instrumentation, engine & part, pump and control valve, marine propeller.
Valves, fitting, marine.
Marine engine.
Yamaha Series: FT60GETL, F75FETL, F100GETL, F115BETX, F115BETL, F150FETX / Suzuki Series: DF60ATV, DF60ATL-A, DF90ATL, DF115ATL, DF115ATX, DF115BTX-A, DF150TX, DF150TX-A
Black tiger shrimps & white shrimps.
Ball Valve,Gate Valve,Butterfly Valve,Actuator Valve All Kind Of Valve are Covered
Fuel oil / gasoil & euro 5 diesel..
Flush 3 or 6 litres water for water closet. Adjustable height.
Type : Stern drive Clutch type : Hydraulic multiple friction plate type clutch Rated Output : 370 mhp / 272 kW Reduction ratio (fwd / rev): 1.65 / 1.65 | 1.78 / 1.78 | 1.97 / 1.97 Dry weight : 112 kg (247 lbs) Direction of rotation :I/P Counterclockwise, O/P Counterclockwise Trim zone : -6 to 10
2019 Evinrude 40 HP E40DRGL Outboard Motor Engine Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke: 3.62 x 2.60 in. (92 x 66 mm) Displacement: 52.7 cu.in. (863cc) Starting: Rope (Electric Accessory) Dimensions Shaft Length: 20 in. (508 mm) Weight: 232 lb. (105 kg) General Trim Method: Manual Propshaft Horsepower: 40 hp Full Throttle Operating Range: 5500-6000 rpm Gear Ratio / Shift: 2.9:1 Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator: 81 Amps Total / 25 Net Dedicated Steering: Tiller Warranty: 3-Year, Non-Declining Features Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four--stroke outboard. Extend the life of your outboard and your boating season. More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run. Specifications Engine Model: E40DRGL Graphite Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke - in (mm): 3.62 x 2.60 (92 x 66) Displacement - cu in (cc) L: 52.7 (863) Gear Ratio: 2.9:1 Full Throttle RPM Range: 5500-6000 RPM Weight - lbs (kg): 232 (105) Starting: Rope (Electric Accessory) Controls: Mechanical Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator Output*: 81 Amps Total / 25 Net Dedicated Steering: Tiller Trim Method: Manual Trim Range: -4�° to 16�° Tilt Range: 65�° Shaft Length - in (mm): 20 (508) Lubrication: Multi-Point Targeted Oiling Oil Tank Capacity - gal (L): 2 (1.9) Recommended Oil: Evinrude / Johnson XD-100 Oil Recommended Fuel: 87 Octane Warranty: 3-Year, Non-Declining Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
2019 Honda 25 HP BF25D3LRG Outboard Motor For mid and smaller horsepower needs, there is plenty of punch in the Honda BF30 and BF25. But it is power you will feel and never hear. That because all Hondas are whisper quiet. So extraordinarily quiet, we donot have to put extra dampening insulation in the cowling like most manufacturers do. Instead we pack em full of features. Like a Center Mount Tiller with up-front controls. The 3 to 3 Induction system that provides smooth, quiet operation. And Autostart Enrichment, which makes starting a breeze. And of course, the exceptionally durable BF25 and BF30 are backed by the best standard warranty you can get. The end result? More good times on the water. Condition New Stock Number BF25D3LRG Year 2019 Make Honda Marine Model BF25 L Type Fuel Type Gas Vehicle Type Outboard Category Four Stroke Engine 4-Stroke SOHC 3 Cylinder - 2 Valves/ Cyl. Propulsion Single Outboard Propulsion Type Powered Number of Engines 1 Engine Type Outboard Engine Power 25 HP Dry Weight 160 lbs
2019 Suzuki 40 HP DF40ATL2 Outboard Motor This is the only engine in the 40 hp class to offer DOHC performance, and also the only engine in its class to incorporate a maintenance-free, oil-bathed timing chain, which provides the outboard with increased durability and maintenance free operation. With larger displacements for increased power and performance, Suzuki's Lean Control System for improved fuel economy and designs that are more compact and lighter in weight than the predecessor, the new DF40A engines also incorporate the Suzuki Troll Mode System. During the 2011 Miami Boat Show, the Boating Writers of America presented Suzuki Marine with the NMMA Innovation Award for the DF40A/DF50A. Features Multi Point Sequential Electronic Fuel Injection Suzuki Lean Burn Control System Suzuki Troll Mode System Direct Ignition Suzuki Easy Start System Over-Rev. Limiter Low Oil Pressure Caution Fully Transistorized Ignition Timing Chain Fresh Water Flushing System Power Trim and Tilt Suzuki Anti-Corrosion System Specifications Recommended Transom Height (inches): L: 20 Starting System: Electric Weight (lb.): L: 229 Engine Type: DOHC 12-Valve Fuel Delivery System: Multi Point Sequential Electronic Fuel Injection Number of Cylinders: 3 Piston Displacement inches (cc): 57.4 (941) Bore x Stroke inches (mm): 2.85 x 2.99 (72.5 x 76) Maximum Output HP: 40 Operating Range (rpm): 5000 - 6000 Steering: Remote (Tiller Kit Optional) Oil Pan Capacity quarts (liter): 2.9 (2.7) Ignition System: Solid State Direct Ignition Alternator: 12V 19A Trim Position: Power Trim and Tilt Gear Ratio: 2.27:1 Standard Propeller: Optional See Dealer Propeller Selection: 9 - 17
Specifications Engine Type: Yamaha T25XWTC High Thrust Four Stroke Horsepower: 25 hp Cylinders: 2 cyl Shaft Length: 25" Steering: Remote Mech Starter: Electric + Manual Weight: 154 lbs Full Throttle Range: 5000 - 6000 rpm Displacement: 432cc Induction System: EFI Warranty: 3 years
We able to supply globe valve with more competitive price without compromise your valve performance and safety requirements.
We are able to supply various kind of valve like ball valve, butterfly valve, gate valve, strainers, catridges filter, check valve, breather valve, and etc. Price is competitive, without compromise your performance and safety requirements.
Norminal Size: DN750 Pressure Rating: ASML CL 150 Design Spec: API 6D, API 6FA (ASME BI 6.4'/ SERIES-A) Type of end connection: Falnced Type of Luce: Raised Face Type of Bore: Full, Bore Mat, body: Duplex Stainless Steel Mul, Lrim: Duplex Stainless Steel Mul spec, body: ASTM A182 Grade F51 / A090-4A Type, Mounting: TRUNNION Model, valve: TBA Model, ucluutor: Bettis and TBA Classification, hazardous: Ex II 2GD Certification, electrical: ATEX EExd
Industrial ball valves for oil and gas
Our patented Stop Valves complies with the rigid standards of BS EN 1213 for valves and uses WRAS approved Nylon 6. Our products have also passed SIRIM tests and is extremely robust with high thread strength. Size for size, tests have shown that our valves have the lowest head loss and the highest flow rates when compared to any other similar-sized stop valves available in the market. The patented stop valve can be used for both hot (70'C) and cold water applications.
WALLERCODE Water Level Control Valve is an Internationally Patented next generation fill/intake valve that will be taking the world by storm. Its function is to stop the inflow of water supply when a certain desired water level is reached. Its revolutionary ingenious design eliminates the need of floater-buoyancy mechanism, making it compact and light, about the size of the palm, which will efficiently save costs in storage and transportation. WALLERCODE Water Level Control Valve has Multiple Applications, ideal for use in Toilet Cisterns, Water Conservancy Tanks, Long Bath, Pails of all Sizes, Water Tubs, Aquariums, Swimming Pools, Livestock Tanks, Irrigation System, and other various kinds of applications that anyone can imagine. Due to its One-Size-Fit-All versatility, it makes all bulky conventional float-operated valves obsolete and the scenario of water-overflowing due to negligence will become history. Thus precious water is conserved. Please visit Youtube video to view WALLERCODE in action. WALLERCODE Water Level Control Valve carries the following features and advantages: 1) It is easy to install. 2) Its operation is quiet. 3) Its water-refilling rate is faster. 4) It has no external moving parts. 5) It has built-in anti-siphon function. 6) It is simple to adjust the desired water levels. 7) It is made of non-corrosive and non-toxic materials. 8) It permits tolerance to fluctuation of wave at water surface. 9) It can function at both low and high-pressure water supply. 10) It has built-in self-cleaning function preventing accumulation of dirt or grits. 11) It can be made to specific requirements for use in industrial applications such as in reservoirs, in boilers, in chemical plants and so on. 12) It can function even when it is totally submerged in water, thus it is used in our New Internationally Patented Product: The Rainwater Collection And Storage System, a system to collect and re-utilize rainwater without the use of an electricity-consumed water pump that require regular maintenance. The Packaging of WALLERCODE Water Level Control Valve is available in: 1) Single Side-inlet Valve Pack; 2) Twin Side-inlet Valve Pack; 3) Single Bottom-inlet Valve Pack and 4) Multi-applications Kit, consisting Two Side-inlet Valves and some useful Accessories like Flexible Hose, Adaptor Clip, Rubber Sucker and Tap Adaptor. 50, 000 pcs per 40 footed container
SYSTEM COMPONENT: Alarm Check Valve, Retarding Chamber, Alarm Bell, Standard Trim, Drain Valve, Ball Valve, Gauges, Pressure switch, Fittings and Nipples. - For ordering information: Nominal Size, Max. Working Pressure and End Connection
