Bitumen Penetration Grade 85/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RABIT Trading Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 85 to 100. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen penetration grade 85/100 is semi hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 85/100 is one of the most used bitumen grades and it�¢??s a basic material for all other bituminous products. Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.
Blue 3 ply earloop disposable face mask.
Kn95 face mask.
REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25
Canola Seed Oil Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT Commodity: Canola Oil Type: Refined, Winterized, Deodorized, Bleached. Standards: Conform to British Standard BS 684, European Norm CEN/TC 307, International Standard Organization ISO/TC 34/SC11, International Food Standards of United Nations, FAO Codex Alimentarius CODEX STAN 210-1999 Standard for Named Vegetable Oils or Standard of production country. Quality: Fit for human consumption, free from foreign matter, any other oil or animal fats. Color (51/4 Lovibond): Red 3 maximum, light yellow, clear and transparent. Odor: Characteristic taste and no odor. Visibility: Without any deposition and blurriness. Taste: Neutral, without an artificial taste, free from rancidity or any strange or bad taste and smell. Shelf Life: 12 months, can be up to 24 months with addition.
VEGETABLE COOKING OIL RBD PALM OLEIN RBD Palm Olein is the liquid fraction obtained by the fractionation of palm oil after crystallization at controlled temperatures It is especially suitable for frying and cooking Main applications of RBD Palm Olein include salad and cooking oils in households industrial frying fat of instant noodles potato chips doughnuts and condensed milk GLOBAL INTELLECT VENTURES SDN BHD produces several brands of cooking oil such as FATIM GLOBAL ELLAMIAMIA GOLDEN OIL We also contract produce and package for customers using their own brandsRBD Palm Olein is cholesterolfree and contains vitamin AD and E It has high stability to oxidation and is nutritionally healthy with a balanced composition Emulsifying agents may be added along with permitted colors flavors and other ingredients as desired to suit final product application Our quality standard is in accordance to Palm Oil Refiners Association of Malaysia PORAM Quality standard CP10 QUALITY C CP8 QUALITY B CP6 QUALITY A We can also offer the quality in accordance to IV56 IV57 IV58 IV60 and IV64 The premium quality 100 pure refined vegetable cooking oil RBD Palm Olein extracted from palm oil Rich in vitamin A D E zero cholestrol With no artificial addictive or preservative and Trans fat free Benefit Pure natural goodness rich in Vitamin E A and D Zero Cholesterol With no artificial additive or preservative and Trans fat free refined RBD palm oil for cooking Product CODE Product Description CHEMICAL PROPERTIES PHYSICAL PROPERTIES PACKING IODINE VALUE WIJS g l2 100g FREE FATTY ACID AS PALMITIC MOISTURES IMPURITIES Peroxide Value MEQkg MELTING POINT C Color 5 LOV Max Cooking oil RBDP Olein IV 56 56 Min 01 Max 01 Max 1 max 24 max 3R Jerrycan RBDP Olein IV 58 58 Min 01 Max 015 Max 1 max 9 max 3R Jerrycan We provide premium grade of Palm Cooking Oil in from 5 Liter to 20 Liter onward in jerry can pete Bottle tin drum etc We provide all type of packaging for Palm Cooking Oil from 1 Liter to 25 Liter We supply all types of Palm Cooking Oil CP6 to CP10 We own a factory and provide OEM service for packaging We have PETE bottle Jerry Can Plastic or Steel Drum Flexi bag or Flexi tank We can offer very good and reasonable price for importers
We are able to supply your company without any problem regards. We can readily supply you with very good quality and quantity with specifications below and also to inform you that right now is the new season . SPECIFICATIONS OF CASHEWNUTS:- Cultivation Type : Organic Processing Type : Dried Commodities : Cashew nut ww240, ww320, ww450, SW240, SW320 Count per lbs : 220 -240 Moisture: 3% - 5% Broken: 3% max Next low size : 10%max Second quality : 5% max Third quality: 1.5% max Light blemish whole : 1.5% max Light blemish pieces: 1.5% max Blemish Whole : 0.5% max Desert quality: 0.5% max Scapes: 1.0% max Adhering testa: 3.0/1.5% max Total defects: 8.0% PACKAGING -In PE bag: 50lbs(22.68kg)/carton -In PE bag: 2x10kg/ Carton -In PE bag: 2x 25lbs(11.34kg)/carton -In TIN : 2x25lbs(11.34kg)/ Carton -In TIN: 2x10kg/ Carton Flexi/ Vacuum plastic bag 22.68kg (50lbs) in 1 carton, 700 cartons/ Twenty foot container Tin box 10kg or 11,34kg net, 2 tin box in 1 carton, 700carton/ Twenty foot container As per Buyer's requirements List of documents for presentation once the prepayment is made by buyer: A full set of 3/3 originals plus 3 N/N copies of Ocean Bill of Lading made out Clean on Board -The B/L to be signed in original by the ships Master and blank issued or endorsed for the destination identification of the loaded cargo with the quantity expressed in CANS/METRIC TONS Quantity certificate and quality certificate plus 3 (THREE) copies as issued at loading port by an INDEPENDENT SURVEYOR COMPANY FIA or SGS , nominated by the Seller. Certificate of Origin plus 2 (TWO) copies countersigned by a local Chamber of Commerce. Original copies of Certificates of Health and Phytosanitary plus 2 (TWO) copies countersigned by competent government authority or Health Ministry/Department Signed Commercial Invoice based on the delivered quantity/quality, showing name of vessel, date of completing loading, quantity and state of delivery (3 original and 3 copies) Full set (1 Original and 1 copy) of Insurance Policy for 110 % of the Invoice Value. The Certificate of Insurance coverage with payment confirmation issued by Insurance Company Packing List showing gross/net weight (1 original and 3 copies) Kindly revert to us , as we look forward being your main supplier from East Africa.
We are able to supply your company without any problem regards. We can readily supply you with very good quality and quantity with specifications below and also to inform you that right now is the new season . SPECIFICATIONS OF CASHEWNUTS:- Cultivation Type : Organic Processing Type : Dried Commodities : Cashew nut ww240, ww320, ww450, SW240, SW320 Count per lbs : 220 -240 Moisture: 3% - 5% Broken: 3% max Next low size : 10%max Second quality : 5% max Third quality: 1.5% max Light blemish whole : 1.5% max Light blemish pieces: 1.5% max Blemish Whole : 0.5% max Desert quality: 0.5% max Scapes: 1.0% max Adhering testa: 3.0/1.5% max Total defects: 8.0% PACKAGING -In PE bag: 50lbs(22.68kg)/carton -In PE bag: 2x10kg/ Carton -In PE bag: 2x 25lbs(11.34kg)/carton -In TIN : 2x25lbs(11.34kg)/ Carton -In TIN: 2x10kg/ Carton Flexi/ Vacuum plastic bag 22.68kg (50lbs) in 1 carton, 700 cartons/ Twenty foot container Tin box 10kg or 11,34kg net, 2 tin box in 1 carton, 700carton/ Twenty foot container As per Buyer's requirements List of documents for presentation once the prepayment is made by buyer: � A full set of 3/3 originals plus 3 N/N copies of Ocean Bill of Lading made out Clean on Board -The B/L to be signed in original by the ships Master and blank issued or endorsed for the destination identification of the loaded cargo with the quantity expressed in CANS/METRIC TONS Quantity certificate and quality certificate plus 3 (THREE) copies as issued at loading port by an INDEPENDENT SURVEYOR COMPANY FIA or SGS , nominated by the Seller. Certificate of Origin plus 2 (TWO) copies countersigned by a local Chamber of Commerce. � Original copies of Certificates of Health and Phytosanitary plus 2 (TWO) copies countersigned by competent government authority or Health Ministry/Department � Signed Commercial Invoice based on the delivered quantity/quality, showing name of vessel, date of completing loading, quantity and state of delivery (3 original and 3 copies) Full set (1 Original and 1 copy) of Insurance Policy for 110 % of the Invoice Value. The Certificate of Insurance coverage with payment confirmation issued by Insurance Company Packing List showing gross/net weight (1 original and 3 copies) Kindly revert to us , as we look forward being your main supplier from East Africa.
We are able to supply your company without any problem regards. We can readily supply you with very good quality and quantity with specifications below and also to inform you that right now is the new season . SPECIFICATIONS OF CASHEWNUTS:- Cultivation Type : Organic Processing Type : Dried Commodities : Cashew nut ww240, ww320, ww450, SW240, SW320 Count per lbs : 220 -240 Moisture: 3% - 5% Broken: 3% max Next low size : 10%max Second quality : 5% max Third quality: 1.5% max Light blemish whole : 1.5% max Light blemish pieces: 1.5% max Blemish Whole : 0.5% max Desert quality: 0.5% max Scapes: 1.0% max Adhering testa: 3.0/1.5% max Total defects: 8.0% PACKAGING -In PE bag: 50lbs(22.68kg)/carton -In PE bag: 2x10kg/ Carton -In PE bag: 2x 25lbs(11.34kg)/carton -In TIN : 2x25lbs(11.34kg)/ Carton -In TIN: 2x10kg/ Carton Flexi/ Vacuum plastic bag 22.68kg (50lbs) in 1 carton, 700 cartons/ Twenty foot container Tin box 10kg or 11,34kg net, 2 tin box in 1 carton, 700carton/ Twenty foot container As per Buyer's requirements List of documents for presentation once the prepayment is made by buyer: A full set of 3/3 originals plus 3 N/N copies of Ocean Bill of Lading made out Clean on Board -The B/L to be signed in original by the ships Master and blank issued or endorsed for the destination identification of the loaded cargo with the quantity expressed in CANS/METRIC TONS Quantity certificate and quality certificate plus 3 (THREE) copies as issued at loading port by an INDEPENDENT SURVEYOR COMPANY FIA or SGS , nominated by the Seller. Certificate of Origin plus 2 (TWO) copies countersigned by a local Chamber of Commerce. Original copies of Certificates of Health and Phytosanitary plus 2 (TWO) copies countersigned by competent government authority or Health Ministry/Department Signed Commercial Invoice based on the delivered quantity/quality, showing name of vessel, date of completing loading, quantity and state of delivery (3 original and 3 copies) Full set (1 Original and 1 copy) of Insurance Policy for 110 % of the Invoice Value. The Certificate of Insurance coverage with payment confirmation issued by Insurance Company Packing List showing gross/net weight (1 original and 3 copies) Kindly revert to us , as we look forward being your main supplier from East Africa.
Our sunflower oil are selected light yellow seeds, light flavor and aroma, perfectly suited to today, especially suitable for use in cold sauces and seasonings, making it ideal for light diet consumption, healthy and balanced. REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Color: Max.1.2 red, Lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25 Types of Oil available: -Refined Corn Oil -Refined Sunflower Oil -Refined Soybean Oil -Refined Canola Oil -Refined Cottonseed Oil -Refined Peanut Oil
Olive oil is a liquid fat obtained by pressing whole olives, the fruit of Olea europaea, a traditional tree crop of the Mediterranean Basin, and extracting the oil. It is commonly used in cooking, for frying foods or as a salad dressing. Our sunflower oil are selected light yellow seeds, light flavor and aroma, perfectly suited to today, especially suitable for use in cold sauces and seasonings, making it ideal for light diet consumption, healthy and balanced. REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Color: Max.1.2 red, Lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25 Types of Oil available: -Refined Corn Oil -Refined Sunflower Oil -Refined Soybean Oil -Refined Canola Oil -Refined Cottonseed Oil -Refined Peanut Oil
REFINED SOYBEAN OIL Type Soybean Oil Product Type Fruit Oil Processing Type Refined Cultivation Type Common Use Cooking Grade Premium Place of Origin Thailand Appearance transparent light yellow oily liquid without visible impurities Purity 100 Luster PtCo 180 380 Epoxide number 60 55 Iodine number 60 80 Acidity mgKOHg 050 060 Flash point C 280 270 Density 20C gcm3 09880998 09880998 Loss on heating 030 050 Soyabean oil is a nutritious and delicious cooking oil also providing a rich source for vitamin E which can reduce the risk of heart disease 100 Refined Soybean Oil Grade A Soya oil contains high levels of polyunsaturated fats which break down when heated Specifications Free Fatty Acid 005 01 Peroxide Value meqkg 05 10 meqkg Refractive Index 40oC 14666 147 Iodine Value Wijs 123 139 Moisture 005 01 Cold Test 55 hrs OSI 110oC 55 60 hrs Saponification Value 191 192 Specific Gravity 25oC 0915 0925 Smoke Point 460 465oF Flash Point 650 655oF Fire Point 690 695oF Soybean oil has always been a popular oil for cooking as an inexpensive healthy oil with a high smoke point It contains higher levels of polyunsaturated fats than other oils such as rapeseed giving our Soybean oil the special character of healthy oil Soyabean oil is a nutritious and delicious cooking oil also providing a rich source for vitamin E which can reduce the risk of heart disease SOYABEAN OIL Taste Neutral Impurities Negative Free Fatty Acid max 010 Moisture max 005 Peroxide Value meq O2 kg max 5 Specific gravity at 20 degr C 091 093 Iodine value g 100 g 125 140
REFINED SOYBEAN OIL Type Soybean Oil Product Type Fruit Oil Processing Type Refined Cultivation Type Common Use Cooking Grade Premium Place of Origin Thailand Appearance transparent light yellow oily liquid without visible impurities Purity 100 Luster PtCo 180 380 Epoxide number 60 55 Iodine number 60 80 Acidity mgKOHg 050 060 Flash point C 280 270 Density 20C gcm3 09880998 09880998 Loss on heating 030 050 Soyabean oil is a nutritious and delicious cooking oil also providing a rich source for vitamin E which can reduce the risk of heart disease 100 Refined Soybean Oil Grade A Soya oil contains high levels of polyunsaturated fats which break down when heated Specifications Free Fatty Acid 005 01 Peroxide Value meqkg 05 10 meqkg Refractive Index 40oC 14666 147 Iodine Value Wijs 123 139 Moisture 005 01 Cold Test 55 hrs OSI 110oC 55 60 hrs Saponification Value 191 192 Specific Gravity 25oC 0915 0925 Smoke Point 460 465oF Flash Point 650 655oF Fire Point 690 695oF Soybean oil has always been a popular oil for cooking as an inexpensive healthy oil with a high smoke point It contains higher levels of polyunsaturated fats than other oils such as rapeseed giving our Soybean oil the special character of healthy oil Soyabean oil is a nutritious and delicious cooking oil also providing a rich source for vitamin E which can reduce the risk of heart disease SOYABEAN OIL Taste Neutral Impurities Negative Free Fatty Acid max 010 Moisture max 005 Peroxide Value meq O2 kg max 5 Specific gravity at 20 degr C 091 093 Iodine value g 100 g 125 140
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa Our products are procured from authorized vendors and are in total compliance with set industry norms On behalf of the Management of Alpha Metal Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies represents and warrants to inform you that we are ready willing and able to supply under the penalty of perjury the following commodity with its specifications mentioned below Product Purity 99.99% Quantity Agreed shipment Current location Zambia Country of Origin DRC Congo Price To be negotiated Contract CIF Loading Port Durban SADar es Salaam Delivery Immediately contract signed by both parties Port Destination TBA Payment By TT within 48 hours after delivery and final analysis at the final destination port PROCEDURE 1 Seller issues the FCO 2 The buyer physically inspects the goods in Zambia 3 After clients satisfaction buyer and seller enter into a contract according to their own agreement 4 Upon signing of the contract the buyer will cater for the goods insurance tax and logistics summing to at least 10 of the whole contract value 5 Note that the above charges are deductible from the final invoice value and the remaining balance of 90 is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyers final destination port ie Terms are Negotiable 6 After loading the seller representative will travel together with the buyer to assist and witness dischargeoffloading and to control the wire transfer of the final payment to be made to sellers nominated bank account within 48 hours after receipt of the final assay report from buyers inspection 7 In future quantities seller shall notify the buyer of availability and the above procedure will be repeated