Flexible Food Packaging, for all types of food, biscuits, chips, coffee, pasta, rice, ice cream, vegetables, cereals, milk, tetrapack, yogurt, chocolate, sweets, snacks, frozen products, refrigerated products, etc. We supply printed and neutral material in reels or in single pieces, such as envelopes and bags.
Fencing Made From Electro-welded Plastic-coated Wire With A Triple Selvedge. The Vertical (linear) And Horizontal (crimped) Wires Of The Electro-welded Mesh Are Made In Zinc Coated Steel. 25 M Rolls On Pallets Wrapped In Recyclable Polyethylene Film
r control is designed to Optimize the charging cycles for any type of battery, 230v coil single-pole contactor, D.C. Fuse on rectifier output, delta-star stray flux single-phase power transformer Class h; impregnated in autoclave with ecological epoxy resins, with thermocouples For disconnection due to maximum temperature, single-phase rectifier bridge with Silicon diodes, natural cooling, with snubber protection, mains input and d.C. Output Polarized cables, modular installation on galvanized steel base, sheet steel case with Modular panels so as to assure maximum accessibility in case of service, epoxy Powder coating, oven-baked, standard colour: ral 2002 red, new lexan plate with Charging data very easy to understand, equalized recall push button, on - off push Button, option to adjust the charging time from 90 to 210 minutes, option to adjust The threshold voltage from 2.3 to 2.4 v/cell., equalization charge timed, led signaling Charging phases or result, short check of functions and times, option to program The equalized charge automatically, lab-tested electronic circuit conforming to the Directive on electromagnetic compatibility and ce marking, automatic disconnection Of battery charger due to battery disconnection, option: custom-made color, logo and Silk-screen printing, option: assembly of plugs and battery connectors on request.
With decreasing Current (wa characteristic): 9÷11 h charging time, transformer thermal protection, Modular installation on galvanized steel base (20/10) – (30/10), sheet steel case With modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, ovenbaked, Standard colour: ral 2002 red, option: custom-made colour, logo and silkscreen Printing, mains input and d.C. Output polarized cables, complete with mains And battery cables; assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of the final charge at 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging Time (equalization charge excluded), equalization charge (week-end Charge) to be recalled. It will start after 55’ from charge end, duration Of equalized charging phase: each hour 5’ (repeated for 48 hours), Calculation to determine the size of suitable battery charge: 16a for Every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
The perforating unit is totally an independent group that allows to pre-cut different types of material as film air bubble film, plain pe films, foam, paper to desired intervals. The plant results ideal to put in line with other system as extruders, air bubble film machinery, flexography printing machine. The group, built in steel with auto-level supports, it is composed from a rubber cylinder with neutral movement for the control of the speed of the material, group of pre-cut endowed with brushless motor and cylinder with toothed blades, cylinder of compression brushed and motorization for regulation from keyboard (minimum interval of pre-cut 200mm). The cover protection and the electric plant are conforming to the safety norms ce. The plant can be completed with the trimming group. Contact us
Icroprocessor control is Designed to optimize the charging cycles for any type of battery, single mains input Fuses, auxiliary transformer suitable for the supply voltage, d.C. Fuse on rectifier output, Delta-star stray flux single-phase power transformer, tenvex copper windings with Double enamel insulation; class h; impregnated in autoclave with ecological epoxy Resins, with thermocouples for disconnection due to maximum temperature, singlephase Rectifier bridge with silicon diodes, natural cooling, with snubber protection, Mains input and d.C. Output polarized cables, modular installation on galvanized Steel base (type a: 20/10, type b :30/10), sheet steel case with modular panels So as to assure maximum accessibility in case of service (type a : 10/10 - 12/10, Type b : 12/10 – 15/10), epoxy powder coating, oven-baked, standard color: ral 2002 red, lab-tested electronic circuit conforming to the directive on electromagnetic Compatibility and ce marking, equalization charge timed, automatic start, automatic Disconnection of battery charger due to battery disconnection, smart charging system According to the discharge level of the battery, short check of functions and times, Option: custom-made colour and custom-made logo and silk-screen printing, final Acceptance test conforming to safety regulations, charging with decreasing current (wa characteristic): 9÷11 h charging time, charging with decreasing current (wo - Wa characteristic): 7÷8 h charging time, complete with mains and battery cables; Assembly of plugs and battery connectors on request.
Ptek nre3 three phase is designed to recharge medium - large capacity traction And start lead-acid batteries, developed using our forty-year experience in the field Of battery chargers and multi-years application of microprocessor control systems D electronic circuit conforming to the Directive on electromagnetic compatibility and ce marking, automatic disconnection Of battery charger due to battery disconnection, equalization charge based on Time, charging with decreasing current (wa characteristic):9÷11 h charging time, Transformer thermal protection, modular installation on galvanized steel base, sheet Steel case with modular panels, epoxy powder coating, oven-baked, standard color: Ral 5003 blue, option: custom-made color, logo and silk-screen printing, mains Input and d.C. Output polarized cables, complete with mains and battery cables; Assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of adjustable final Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization Charge (week-end charge). It will start after 55’ from charge end, Duration of equalized charging phase: each hour 5’ (repeated for 48 Hours), calculation to determine the size of suitable battery charge: 16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Ptek tc3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of , three-phase rectifier Bridge with silicon diodes, natural cooling, with snubber protection, mains input and D.C. Output polarized cables, modular installation on galvanized steel base, sheet Steel case with modular panels so as to assure maximum accessibility in case of Service, epoxy powder coating, oven-baked, standard colour: ral 2002 red, new Lexan plate with charging data very easy to understand, equalized recall push Button, on - off push button, option to adjust the charging time from 90 to 210 Minutes, option to adjust the threshold voltage from 2.3 to 2.4 v/cell., equalization Charge timed, led signaling charging phases or result, short check of functions and Times, option to program the equalized charge automatically, lab-tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, option: Custom-made color, logo and silk-screen printing, option: assembly of plugs and Battery connectors on request. Charge at decreasing current with intervention of the final charge At 2.40 v/cell, final charge with timed control 9h / 11h, fixed Charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ From charge end, duration of equalized charging phase: each Hour 5’ (repeated for 48 hours), calculation to determine the size Of suitable battery charge: 16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Ptek nr3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of Battery chargers and multi-years application of microprocessor control systems which On, short check of functions and Times, option to program the equalized charge automatically, lab tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, equalization Charge based on time, charging with decreasing current (wa characteristic): 9÷11 H charging time, transformer thermal protection, modular installation on galvanized Steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked, Standard colour: ral 2004 orange, option: custom-made color, logo and silk-screen Printing, mains input and d.C. Output polarized cables, complete with mains and Battery cables; assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of adjustable final Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ from Charge end, duration of equalized charging phase: each hour 5’ (repeated for 48 hours), calculation to determine the size of suitable Battery charge: 16a for every 100 ah of the battery (e.G. 500 ah Battery: 16ax5 = 80a).
ier output, rectifier bridge with snubber protection, short check of functions and times, option to program the equalized charge automatically, lab tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic Start, automatic disconnection of battery charger due to battery disconnection, equalization charge based on time, charging with decreasing current (Wa characteristic): 9÷11 h charging time, transformer thermal protection, modular installation on galvanized steel base (20/10) – (30/10), sheet steel case with modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, oven-baked, standard colour: RAL 2002 red, option: custom-made colour, logo and silk-screen printing, mains input and d.c. output polarized cables, complete with mains and battery cables; assembly of plugs and battery connectors on request. “WA” CHARACTERISTIC (DIN 41774): charge at decreasing current with intervention of the final charge at 2.40 V/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization charge (week-end charge) to be recalled. It will start after 55’ from charge end, duration of equalized charging phase: each hour 5’ (repeated for 48 hours), calculation to determine the size of suitable battery charge: 16A for every 100 Ah of the battery (e.g. 500 Ah battery: 16Ax5 = 80A).
Product Name : Men bracelets Product Code : PA373M Product Description : Bracelet man silver pattern. This, like our other and bracelets made with silver foil 925/1000 intertwined with each other, creating a flexible tube of rectangular shape. The effect that comes out is great, modern, we go out from the usual silver bracelets, for the closure is very practical, internally there is a steel spring that allows you to open and close it around your wrist, controlled more or less close. The size: 6 mm wide 3.00 mm thick we encourage it to 18.0 cm but you can request your size and the price does not change, only need 8-10 days to have it. Product Origin : Italy Key Specifications & Special Features : Silver bracelets Man bracelets men enamel and silver bracelets men to throttle, bracelets men's fashion, fashion silver bracelets, bracelets sporty silver, silver and rubber bracelets, antique silver bracelets, silver bracelets semi-rigid, hand-made bracelets men, silver chain bracelets.
The battery chargers of the cemb-easy 3000 Series are designed to recharge medium capacity Traction and start lead-acid batteries and are O the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. Technical characteristics easy 3000: • 230v - 50hz one phase supply, (with possibility to request voltages different from The standard ones), adjustable to ± 5% or ± 10% • electronic control provided with final charge timer • on-off switch • rectifier bridge with silicon diodes, natural cooling, with snubber protection and Gemov • tropicalized stray-flux transformer : tenvex copper windings with double enamel Insulation; class h; impregnated in autoclave with ecological epoxy resins. • 12/10 sheet steel case provided with electrical bondings and ergonomic handle • epoxy powder coating, oven-baked • standard colour: ral2002 red • new lexan plate with charging data very easy to understand • lab-tested electronic circuit conforming to the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. • charge at decreasing current with intervention of the final charge At 2.40 v/cell • final charge with timed control 9h / 11h • fixed charging time (equalization charge excluded) • equalization charge (week-end charge) to be recalled. It will start after 55’ from Charge end • duration of equalized charging phase: each hour 5’ (repeated for 48 hours) • calculation to determine the size of suitable battery charge: 16a for every 100 Ah of the battery (e.G. 500 ah battery: 16ax5 = 80a)
REF. 2012202 The Company started to handbuild rowing and sailing boats used for fishing in 1849, basing the craft on the shape and form of the traditional Italian boat ''gozzo sorrentino''. Afterwards the boatyard was opened in 1983. Today, the Company is one of the most prestigious Italian sailing brands in the world, and it has a precise niche market among the lovers of luxury and exclusive boats, conjugating the old local tradition and the international modern class. The gozzos’ main characteristic is namely the double pointed hull with a very similar shape both in the bow and in the stern. The major innovative changes are the use of fiberglass for the hull while leaving all the other parts of the boat in wood and the keel which made possible to reach high speeds. The materials used for the furniture are extremely natural and classic, with a predominance of shiny and matt mahogany, Viennese straw and mirrored, chrome plated and steel hardware. The gozzos are finished with craftmade care, and, at the same time, provided with the most advanced structural elements. The products excel in terms of elegance, safety, performance, technology and comfort. All the boats are equipped with ARG anti - rolling system, which is a stabilization system to reduce the rolling effect of the waves. Matching the characteristic old style of the ancient boats with innovation, functional and aesthetic best solutions, a modern research department made up by designers, nautical engineers, architects and technicians, makes the boats some of the most innovative in the international nautical market. The Company wishes to get in touch with importers/wholesalers as well as representatives/agents from target countries which could be interested in importing and distributing the above products. Target Countries: United Arab Emirates, Brazil, Russia.
Noiseless and ecological electric vehicole/tractor. 16 Km/h. Direct use: you get on, drive and stop (movement dynamics). For all employees who move in a range greater than 100 mt. For quick repair service and transport of small-sized components. Average time saving of about 40 to 60 minutes per day. TECHNICAL FEATURES: - Turning radius: cm. 120 - Length. 140 - Width cm. 85 - Height. 110-130 - Minimum height from ground cm. 5.4 - Weight: Kg 120/140 depending on the type of batteries installed. - fiberglass shell fully recyclable - tube frame with thick serial number for traceability - Handlebar adjustable in height - cover tires 3.00-4 with room air (can puncture tires) - Headlight and taillight - Safety button "ride-on" - Reverse insertable lever - horn, rear view mirror and the battery charge indicator - Electric motor 24 volt permanent magnet 780 watt - Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking - N. Two 12-volt batteries - lightweight tubular plate traction - 105/125 Ah. - Built-in charger and automatic battery status. - Drive chain high strength pinion - Differential aluminum satellites treated steel - Shaft couplings with 6 quarries - Voltage reducer 24 to 12 volt lighting system - Brake system: front disc brake, rear differential, brake lever on the left and engine braking enhanced by the setting of the electronic control. - Colors: white, red, green , yellow, blue, black, orange (other colors on request).
Noiseless and ecological electric tractor. 10 Km/h. -offers two different advantages: it allows to move very quickly and transport up to 300 kg of materials by using a truck designed by us. Speedy, handy in narrow spaces, it spins around with the truck within a 200 cm radius allowing quick access to other departments. Quick repair and maintenance of big- sized and heavy materials (the truck is 120x80 cm with a carrying capacity of 300 kg). Allows to avoid using big and expensive vehicles to move small volumes of goods. TECHNICAL FEATURES: - Turning radius: cm. 120 - Length. 140 - Width cm. 85 - Height. 110-130 - Minimum height from ground cm. 5.4 - Weight: Kg 123/143 depending on the type of batteries installed. - fiberglass shell fully recyclable - tube frame with thick serial number for traceability - Handlebar adjustable in height - cover tires 3.00-4 with room air (can puncture tires) - Headlight and taillight - Safety button "ride-on" - Reverse insertable lever - horn, rear view mirror and charge indicator battery 24 volt 800 watt electric motor RR 1/10 - 24 volt electric motor permanent magnet 780 watt - Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking - N. 2 Batteries 12 volt - tensile tubular plate - 102/157 Ah. - Built-in charger or external high frequency and automatic control of the state of charge. - Traction Chain gear ratio 1/10, 125 - Differential aluminum satellites treated steel - axle shafts with couplings 6 slot - Voltage reducer 24 to 12 volt lighting system - Brake system: front disc brake, rear differential, brake lever on the left and engine braking enhanced by the setting of the electronic control. - Colours: white, red, green, yellow, blue, black, orange (other colors on request).
Noiseless and ecological electric tractor. Moderate purchase price In these facilities, Bigà can be used for: - individual transport of personnel - control, inspection and security service - maintenance, cleaning and transport of small packages - towing with trucks up to 800 kg GENERAL FEATURES: - Turning radius: cm. 120 - Length. 140 - Width cm. 85 - Height. 110-130 - Minimum height cm. 5.4 - Weight: Kg 120/140 depending on the type of batteries installed - fiberglass shell fully recyclable - tube frame with thick serial number for traceability - Handlebar adjustable in height - cover with 3.00-4 tires room air (can puncture tires) - Headlight and taillight - Safety button "ride-on" - Reverse insertable lever - horn, rear view mirror and the battery charge indicator - Electric motor 24 volt permanent magnet 800 watt - 24 volt 800 watt motor RR 1/10 - Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking - N. Two 12-volt batteries - Traction tubular plate - 102/157 Ah - Built-in charger or external high frequency and automatic control of the state of charge. - Drive chain high strength pinion - Differential aluminum satellites treated steel - Shaft with grafts and 6 hp - Voltage reducer 24 to 12 volts for lighting system - Brake system: front disc brake, rear differential, brake lever on the left and enhanced engine braking from the calibration of the electronic control. - Blue color.
Electric cart SPECIFICATIONS: Dimensions: Total Length mm 930 Width mm. 650 Height mm. 1070 Floor Length mm 870 Width mm. Ground Clearance 620 mm. 330 Weights: Total kg including batteries. 77.90 Batteries kg. 13 each. x 2 Motor: Permanent magnet motor with electric 200 W - rpm 120 - 24 V electro 24VDC 2Nm. Voltage and batteries: no Two 12V batteries 32 A C5 sealed gel - series connection, without maintenance. External charger 24 v - 8 ampere - Electronic microprocessor - Power supply 220 v. Brakes: Electric brake block engine, listing in the event of power failure. braking on deceleration (engine braking) enhanced in the calibration of the parameters of the controller. Speed and Capacity (performance with the vehicle in perfect working order on flat surface: Max 5 Km / h + / - 10% Max 250 kg. terms and 100kg. slope of 15%. Maximum flow rate is considered with the load distributed uniformly on the floor. Tires: 2 wheels rubber tires mounted on rims with pneumatic 3.00-4 6-ply roofing. 2 wheels 200x50 diameter core polypropylene gray synthetic rubber ring mounted on swivel mounts. Frame: Tubular steel and Fe 37 powder-coated polyester for outdoor Ral 6018 Spare parts and tools for the maintenance and repair: Original spare parts and tools for maintenance and repair are provided directly to order from Italy Bigà spa. Sound level values: less than 70 dB (A)
Electric small tower tractor. SPECIFICATIONS: Biga 'Pick-up versions and performance with the vehicle in perfect working on flat surface. type 13 max 5 Km / h + / - 10% P / T 800 kg. on the P / T 100 Kg on slope 15% Type 19 max 6,5 Km / h + / - 10% P / T 600 kg. Type 28 up to 8 Km / h + / - 10% P / T 400 kg. Type 34 up to 11 Km / h + / - 10% P / T 200 kg. The maximum range is considered with the load evenly distributed on the plane and the center of gravity of the goods must not exceed the height of mm. 350. Dimensions: Total Length mm 1540 Width mm. 740 Height mm. 1130 Floor Length mm 940 Width mm. Ground Clearance 740 mm. 310 Weights: Total including batteries and banks kg. 176th September 3 banks kg. Batteries kg. 36 each. x 2 Motor: permanent magnet motor RR 10/1 800 W - rpm from 330 to 24 V. N. 2 batteries 12V 140 A sealed gel - connected in series, without maintenance. External charger 24 v - 12 amp - electronic microprocessor - 220 v. transmission: Differential, max. 2 Kgm torque - 2 Shaft with graft rejection in 6 slot. chain drive with front and rear sprocket. Brakes: Front drum, drive with your right hand. Rear disk drive with his left hand. brake, drive on left lever. increased by releasing the brake (engine brake) enhanced in the calibration of the parameters of the controller. Covers: 3.00-4 rubber tires Frame: Tubular steel and Fe 37 powder-coated polyester for outdoor Ral 9007. lighting and signaling devices : Headlight main and tail lights - reverse buzzer, horn. phonometric values: values ??LpAm max = 77.6 - 85.6 LWA - Attendant Leq dB (A) 77.6 Vibration value: vmax (i) = 0.47 m / s2 (maximum value for operator sitting in the driver's seat). Spare parts and tools for the maintenance and repair: Original spare parts and tools for maintenance and repair are provided directly to order from Italy Bigà spa.
Iron, steel.
Each casting machine can accommodate up to 6 moulds , upon customer request. The machine consists of a metal structure that supports a mobile platform on which the lower half-mould is anchored, and an upper platform on which the upper half-mould is anchored and which has the function of keeping the mould closed. The mould is kept closed between the two frames by means of pneumatic pistons, formed by a pneumatic gripping system, during the casting phase. The center of rotation is fixed The frames have the characteristic of being able to rotate in any position (flat, vertical or inclined depending on the operation to be performed). They are also equipped with micrometric adjustments to accommodate molds of all sizes. All sanitary ware composed of two or three parts (if the third part can be removed manually) such as: hanging pots and bidets ( made with moulds in three parts), washbasins of all kinds, washbasins and other special pieces The demolding of the pieces takes place through a special trolley on wheels supplied with the machine itself that is mechanically lifted The machine is suitable for small productions and productions that require frequent mold changes. The demolding of the pieces takes place above trolleys that can also have the function of piece storage.