r control is designed to Optimize the charging cycles for any type of battery, 230v coil single-pole contactor, D.C. Fuse on rectifier output, delta-star stray flux single-phase power transformer Class h; impregnated in autoclave with ecological epoxy resins, with thermocouples For disconnection due to maximum temperature, single-phase rectifier bridge with Silicon diodes, natural cooling, with snubber protection, mains input and d.C. Output Polarized cables, modular installation on galvanized steel base, sheet steel case with Modular panels so as to assure maximum accessibility in case of service, epoxy Powder coating, oven-baked, standard colour: ral 2002 red, new lexan plate with Charging data very easy to understand, equalized recall push button, on - off push Button, option to adjust the charging time from 90 to 210 minutes, option to adjust The threshold voltage from 2.3 to 2.4 v/cell., equalization charge timed, led signaling Charging phases or result, short check of functions and times, option to program The equalized charge automatically, lab-tested electronic circuit conforming to the Directive on electromagnetic compatibility and ce marking, automatic disconnection Of battery charger due to battery disconnection, option: custom-made color, logo and Silk-screen printing, option: assembly of plugs and battery connectors on request.
Attery charger due to battery Disconnection, smart charging system according to the discharge level of the battery, Short check of functions and times, option: custom-made colour and custom-made Logo and silk-screen printing, final acceptance test conforming to safety regulations, Charging with decreasing current (wa characteristic): 9÷11 h charging time, charging With decreasing current (wo - wa characteristic): 7÷8 h charging time, complete With mains and battery cables; assembly of plugs and battery connectors on request. Wa (din 41774): Charge at decreasing current with intervention of the Final charge at 2.40 v/cell, final charge with timed Control 9h / 11h, fixed charging time (equalization Charge excluded), equalization charge (week-end Charge) to be recalled. It will start after 55’ from Charge end, duration of equalized charging phase: Each hour 5’ (repeated for 48 hours), calculation to Determine the size of suitable battery charge: 16a For every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a). Wo-wa: Charge at decreasing current with intervention of the Final charge at 2.42 v/cell, final charge with timed Control 7h / 8h, fixed charging time (equalization Charge excluded), equalization charge (week-end
Ptek tc3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of , three-phase rectifier Bridge with silicon diodes, natural cooling, with snubber protection, mains input and D.C. Output polarized cables, modular installation on galvanized steel base, sheet Steel case with modular panels so as to assure maximum accessibility in case of Service, epoxy powder coating, oven-baked, standard colour: ral 2002 red, new Lexan plate with charging data very easy to understand, equalized recall push Button, on - off push button, option to adjust the charging time from 90 to 210 Minutes, option to adjust the threshold voltage from 2.3 to 2.4 v/cell., equalization Charge timed, led signaling charging phases or result, short check of functions and Times, option to program the equalized charge automatically, lab-tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, option: Custom-made color, logo and silk-screen printing, option: assembly of plugs and Battery connectors on request. Charge at decreasing current with intervention of the final charge At 2.40 v/cell, final charge with timed control 9h / 11h, fixed Charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ From charge end, duration of equalized charging phase: each Hour 5’ (repeated for 48 hours), calculation to determine the size Of suitable battery charge: 16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Ptek nr3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of Battery chargers and multi-years application of microprocessor control systems which On, short check of functions and Times, option to program the equalized charge automatically, lab tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, equalization Charge based on time, charging with decreasing current (wa characteristic): 9÷11 H charging time, transformer thermal protection, modular installation on galvanized Steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked, Standard colour: ral 2004 orange, option: custom-made color, logo and silk-screen Printing, mains input and d.C. Output polarized cables, complete with mains and Battery cables; assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of adjustable final Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ from Charge end, duration of equalized charging phase: each hour 5’ (repeated for 48 hours), calculation to determine the size of suitable Battery charge: 16a for every 100 ah of the battery (e.G. 500 ah Battery: 16ax5 = 80a).
ier output, rectifier bridge with snubber protection, short check of functions and times, option to program the equalized charge automatically, lab tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic Start, automatic disconnection of battery charger due to battery disconnection, equalization charge based on time, charging with decreasing current (Wa characteristic): 9÷11 h charging time, transformer thermal protection, modular installation on galvanized steel base (20/10) – (30/10), sheet steel case with modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, oven-baked, standard colour: RAL 2002 red, option: custom-made colour, logo and silk-screen printing, mains input and d.c. output polarized cables, complete with mains and battery cables; assembly of plugs and battery connectors on request. “WA” CHARACTERISTIC (DIN 41774): charge at decreasing current with intervention of the final charge at 2.40 V/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization charge (week-end charge) to be recalled. It will start after 55’ from charge end, duration of equalized charging phase: each hour 5’ (repeated for 48 hours), calculation to determine the size of suitable battery charge: 16A for every 100 Ah of the battery (e.g. 500 Ah battery: 16Ax5 = 80A).
The battery chargers of the cemb-easy 3000 Series are designed to recharge medium capacity Traction and start lead-acid batteries and are O the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. Technical characteristics easy 3000: • 230v - 50hz one phase supply, (with possibility to request voltages different from The standard ones), adjustable to ± 5% or ± 10% • electronic control provided with final charge timer • on-off switch • rectifier bridge with silicon diodes, natural cooling, with snubber protection and Gemov • tropicalized stray-flux transformer : tenvex copper windings with double enamel Insulation; class h; impregnated in autoclave with ecological epoxy resins. • 12/10 sheet steel case provided with electrical bondings and ergonomic handle • epoxy powder coating, oven-baked • standard colour: ral2002 red • new lexan plate with charging data very easy to understand • lab-tested electronic circuit conforming to the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. • charge at decreasing current with intervention of the final charge At 2.40 v/cell • final charge with timed control 9h / 11h • fixed charging time (equalization charge excluded) • equalization charge (week-end charge) to be recalled. It will start after 55’ from Charge end • duration of equalized charging phase: each hour 5’ (repeated for 48 hours) • calculation to determine the size of suitable battery charge: 16a for every 100 Ah of the battery (e.G. 500 ah battery: 16ax5 = 80a)
Casting and steel manifolds connect exhaust output from engine head to exhaust pipe channelling the exhaust gases towards the emissions reduction and silencing systems. We manufacture our products with the highest quality and certified types of cast iron and steel to guarantee the best performance in heat resistance and thermal stock. Our latest range extension is for turbocharger applications that require top quality materials and machining. We provide our quality products complete with fitting kit to guarantee the proper assembly and an excellent performance of the exhaust system. Catalysts design is specific for each application and all our maniverters are ECE 103R type-approved according to European emissions standards and regulations.
Torsional Vibration Dampers (TVD) CORA TVD's stand high loads as our premium quality rubber compounds maximize their damping properties. Decoupled Dampers or DDS (Double Damping System Dampers) Decouplers are made up of a TVD assembled with a torsional coupling, so-called â??isolatorâ??. DDS special design helps to eliminate crankshaft vibrations at low the frequency through the crankshaft isolator rubber while the TVD reduces the torsional vibrations at high frequency inside the crankshaft. Viscous Dampers In VISCOUS dampers, the viscous oil layer placed between the inertia ring and pulley body runs the energy dissipation and converts it into heat. This technology can dampen a wide range of crankshaft natural frequencies from different orders. We hold two patents on innovative construction solutions for viscous dampers.
Driveshaft Flexible Couplings. We designed a chain-linked structure of high-resistant metallic and/or polymeric elements. Extremely flexible. MADE IN ITALY. Over 200 Application in the major car brands. CORA OE Quality, Aftermarket Price Fields of Application: * Automotive * Machinery & Equipment * Construction * Marine * Railways Vehicles * Wind Power * Agricultural Machinery Send us an enquire for our brochures and quotation.
Nitrile gloves cardinal flex 200/box, medical equipment, icu (intensive care type) ventilator, ffp 3 masks, 3ply masks, gowns, ventilators gowns, coveralls type 5/6, disposable medical syringes, boson self testing rapid test anterior nasal, clungene rapid test professional 3 in 1,.
Driveline coupling, torsional vibration dampers, decoupled dampers or dds (double damping system dampers), viscous dampers, exhaust manifolds (ece 103r type approved maniverters.).
Cosmetic Product Like Lipsticks, Foundation And Cream.
Nebulizers, blood pressure monitors, blood glucose monitors, digital clinical thermometers, humidifiers, heat pads.
The personal gown to standards is protective to create a barrier to be prevented and minimized expected transmitted by liquid exchange. Breathable fabric for ease of use. It is impermeable to liquids and particles. Free of hair and dust. Velcro tape adjustable up to 10 cm at the neck with added laces. The four-lace belt system ensures a secure fit. The elastic rib insert on the cuff ensures safety and comfort during prolonged use. No leaks through the stitched parts thanks to the heat-sealed tape
Gourmet food, meal kit.Distributor, importer, agent
Model kits made out of balsa.
Garments, sportswear, gloves, working gloves, work wear, track suits, football kit, T-shirts.
wholesale and retail Men's and women's short sleeves cotton polo shirts Made of cotton 200GSM, custom material is welcome. Size: S, M, L, XL, XXL, XXXL or customized Color: many colors are available/customized Logo: silk screen/heat transfer/embroider/label Gender: unisex MOQ: 200pcs or negotiable Sample time: 8 days Production time: 30 days or negotiable Payment terms: Letter of credit L/C Business terms: FOB, CIF, or negotiable
Cnc work center 4 Axis Kit for engraving and bevelling Max dimensions 2180x2935 mm Thickness 3-50 mm Electrospindle: - Speed 15.000 rpm - Power 13,5 kW Max tool diameter 150 mm Power 24,75 kw
1. jet fuel a 1; e.g. russian origin aviation kerosene colonial grade 54 "jp 54" (gost10227 86); 0.5/1 m bbl d&p test, which activates annual contract up to 3m bbl/month, fob rotterdam or novorossiysk or houston. 2) diesel d2, sulphur content 0.02% max; e.g. russian origin gasoil l 0.2 62 (gost 305 82); 25.000/50,000 mt d&p test, which activates annual contract up to 300,000 mt/month, fob rotterdam or novorossiysk or houston. gasoil, en590 10 ppm e.g. russian origin (gost r 52368 2005); 25.000/50,000 mt d&p test, which activates annual contract up to 300.000 mt/month, fob rotterdam or novorossiysk or houston. please present loi request sblc and contract bank to bank.
