MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur. D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05. D2 Automotive Fuel Oil (ago). D6 Virgin Fuel Oil. Hsd Diesel High Speed 500ppm En90. Diesel En590 Euro4 Gost 52368. Pms Premium Motor Spirit Jp54 (ts1) Gost 10227-86. Jet Fuel A1 Gost 10227-86. Marine Fuel Oil Cst 180-280-380. Espo (siberia Pacific Oil) Crude Oil Api 34,7. Lco (light Cycle Oil). Mazut Mt100 Gost 10585-75 And 10585-99. Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93. Lpg 50/50 Propane/butane - 70/30 P/b. Lng 5542-87 By Iso Containers Etc. Gasoline All Types (87-89-92-95). Bitumen/asphalt All Grades. Fertilizers Urea, Dap, Etc Product Description : Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils.. Price of product ( USD price or FOB price) : 20.000 MT monthly market price. 100.000 MT monthly market price Less 5%. Product origin : Russia and Non Russia Key Specifications/Special Features : All types/grades of Fuels, Gas, Oil are available for supply. Many commercial names for oils, fuels, gases, etc. are used in the market. To avoid misunderstanding basic details of specifications needed by buyer are mandatory. Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : Bulk in tanker vessels. Tanks 20 MT.
Bitumen Product Description : Bitumen is widely used in the construction of asphalt roads and bituminous membrane products. Bitumen is commonly used to build highways, motorways and rail networks. Bitumen has excellent water-proofing properties and is widely used for making roofing products along with a range of other household and industrial applications, from emulsion paints to sound-proofing. Penetration Bitumen and Bitumen Emulsions are used for the construction of railway tracks and by using special types of bitumen such as Polymer Modified Bitumen, the vibration and noise levels are reduced due to a dampening effect. Bitumen has been proven to be effective on both high-speed railway tracks and heavy load railway tracks. Bitumen is also used for surfacing airfield runways and air strips (PMB is preffered due to its fuel resistant properties) and taxi ways. For the Marine construction industry bitumen is used for hydraulic applications such as canal lining, underwater tunnels, river bank protection, dam construction and sea defences. There are also numerous industrial applications like roofing felt material, printing inks, packaging paper, linoleum, electrical cable / Junction box insulation, mastic for roofing of terraces, and duplex paper manufacture. Price of product ( USD price or FOB price) : 3.000 MT monthly market price. 10.000 MT monthly market price Less 5%. Product origin : Russia and Non Russia Key Specifications/Special Features : Specifications for types/grades of Oil Bitumen according to buyer specifications and/or will be given upon received buyer credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : MOQ 3000 MT Bulk in tanker vessels. Drums 150/180/200 Kg. Jumbo bags 1000 Kg. Poly bags 32 Kg. Tanks 20 MT.
We can supply met coal (hi and med vol) as requested, need to start with 30,000 tons per month and can work up to 110,000 tons per month; specs as outlined below: Tonnage-25-30k tons per month Spec: Dry-Basis Ash-8-9.5 Sulfur-1-1.1 BTU-13,000-14,000 Vol- 26 to 32(M-H) FSI- 9 Tonnage-1st Month-25-30k 2ndMonth-35-40k & 40k per month for the remainder of contract. Spec: Dry-Basis Ash-7.5-8.5 Sulfur-0.5% BTU-13,500-14000 Vol-32-35(H) FSI-7-8.5 Three year contract, fixed price for first two years; adjusted to market in 3rd year, or as negotiated. This is good coal and with a two year fixed price contract it should be very attractive. Buyer can inspect coal on site and contract directly with producer if required. Producer has 20+ years in business and sells to some of the largest US power and steel companies.
WE MAY HAVE THE COAL OR PET COKE THAT YOU ARE LOOKING FOR. WE ARE CURRENTLY SHIPPING AT THIS TIME AND WELCOME AN OPPORTUNITY TO BE OF SERVICE. PLEASE SEND US FULL SPECIFICATIONS OF WHAT YOU REQUIRE AND TARGET PRICING. # Description Comments 1 Coking Coal Low Vol, Mid Vol and High Vol Coal Tonnage Available 65K MT-100K MT/Month/36 Months Delivery Port East Coast USA (Norfolk or Baltimore) 2 Thermal Coal Sulfur:
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
- Commodity: Diesel Fuel EN590 (10PPM), JET FUEL A1 - Origin: Kazakhstan I let the buyer deal directly with Refinery (Seller). Buyers can trade with FOB TTT Rotterdam, FOB TTT Houston, and Refinery, which can trade CIF. Please contact me only if you are interested in real buyers.
Min. Qty is 50,000 MT for all products except Jet Fuel with Min. Qty of 2M BBL and Min Contract Period is 12 months. FOB GERMANY: VTO (Vessel TAKE OVER) PROCUREMENT PROCESS 1. REQUEST 1.1. The Buyer Issues A Letter Of Interest Or The Request For Product Application. - The Letter Of Interest Or The Request For Product Application Shall Consist Of Product Name, Volume, Discharge/retrieval Port, Specification(s), Collateral Instrument Issuing Bank Name, Company Information, Etc. 2. Commercial Offer 2.1. The Seller Issues A Commercial Offer. -The Commercial Offer Exhibits Information Such As Specific Prices, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Etc. 2.2. The Buyer Formalizes And Returns The Commercial Offer In Conjunction With A Banker Signed Ready Willing And Able (rwa) Letter Stating, The Banker Shall Issue A Collateral Instrument On Behalf Of The Buyer. 3. Sales Agreement 3.1. The Seller Issues The Sales & Purchase Agreement. -The Sales & Purchase Agreement Exhibits Information Such As Price, Index Discount, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Banking Coordinates, And Other Tacit Data. -The Delivery Timeline Is Contingent On The Volume, Load/discharge Ports, And Vessel Availability. 4. Formalization/banking 4.1. The Buyer Formalizes And Submits The Sales & Purchase Agreement Within (3) Business Days. 4.2. The Sales & Purchase Agreement Is Lodged With The Buyer's And The Seller's Bank. 4.3. The Buyer's Banker Transmits A Pre-advice Via Swift MT799. 4.4. The Buyer's Banker Transmits The Collateral Instrument Via Swift MT760. 4.5. The Seller's Banker Issues A 2% Performance Bond. 5. Loading/documentation 5.1. Subsequent To The Validation Of The Collateral Instrument, The Sellerloads The VESSEL (At Own Expense) And Issues The Product & Delivery Documentation. -Product & Delivery Documentations Are Submitted Digitally And Via Courier When Created. Documentation Comprises Of, But Not Limited To; Charter Party Agreement, Vessel Questionnaire 88, Vessel/product Insurance Policy (lloyds), Commitment To Supply/commercial Invoice, Statement Of Product Availability/certificate Of Origin, Bill Of Lading/cargo Manifest, Ullage Report, Certificate Of Quality, Notice Of Readiness/eta To Destination, Etc. -The Buyer May Track And/or Communicate With The Vessel At Their Convenience. 6. Delivery/discharge 6.1. The Seller Issues The Authorization To Board (ATB) And The Dip Test Authorization (DTA). 6.2. The Buyer Executes An Mt103 Wire Transfer Within 24 Hours Subsequent To The Quality/quantity Inspection (optional) And In Accordance With The Final Invoice. 6.3. The Seller Transfers The Certificate Of Ownership (title) Subsequent To The Receipt Of Payment. 6.4. The Buyer Takes Over The Vessel. 6.5. Vessel Departs
* Quantity MIN 1,000,000 Barrels x 12 months with R/E * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.