Grinding-polishing machines Sturdy and compact structure. Available with "Prismatic", "Frankfurt" or "Comma" abrasive holding plate. Selection of 4 different speeds to optimized working of the floor. Three phase motor driven by frequency inverter. Machine level adjustment by eccentric wheel axis.
Used polishing machines and lines for granite and marble. 1 to 22 heads. With and without calibration. For tiles and slabs. With automatic loading and unloading. Gmm, Breton, Simec, Pedrini, Gaspari, Denver, Terzago, Marchetti, Minali, Gregori, Zambon, Monlevi, Cemar, Blandini. And also the whole range of used equipment for the extraction and processing of granite, marble, stone. From mining and block cutting to any finished product (Italy).
Bridge cutting machines for marble, bridge saw producer, cutting machine for marble and granite production, slab trolleys production, portable bench saw manufacture, floor grinders & polishers.
During the last years the most used rolling stands type for long products production have been the housingless stands and, even not less much, the cantilever stands. The more frequent requests of our customer, involved in lower investments for complete rolling mills or for revamping of existing plants, are: To reduce the investments for civil works, buildings and cranes. To reduce the equipment delivery times. To reduce the investment cost of mill train. To reduce spare parts. Equipment without on board plant Easy maintenance equipment High performance equipment In other words the rolling mill is primarily interested in lower costs and as well as higher yields! In order to grant these requests and the suggestions of the production and maintenance mangers, PERT has been the first supplier now to develop a new generation of stands called BS Type rolling stands, the Intermediate block and 2XTechnology Finishing Block (the only block in the market that can work with 2 strand).
Building materials for renovation & restoration both in residential & monumental field, mortars, hydraulic limes, industrial floorings, tile adhesives, waterproofing systems, damp proofing systems, thermal insulation.
FFP2 MASK with 5 layers, protective face mask BFE over 95% Electrostatic filter material,against PM2.5 effectively. Blocking dust, pollen, virus and so on. With elastic ear-loop, soft and comfortable to wear. Standard: EN 149:2001+A1:2009 Certification: CE EU2016/425 Product origin: ITALY MOQ 10000pcs FOB ITALY PRICE: 1,65 EURO Payment 50% advanced, balance before shipment Delivery Time: 48 HOURS
The wide range of continuous output melting units model mitsu enables to process any kind of hot melt adhesives in blocks or chips with working temperatures up to 240°c, including reactive pur and uv-curable ones. The melting rate varies from 2.5 to 160 kg/h, according to different models, giving an appropriate answer to all high, medium and low melting requirements. This modular system enables to conform to different production needs thanks to partial use function and possibility to integrate later on the melting capacity.
Catalytic converter scrap, copper wires scrap, ABS scrap, PVC scrap, HDPE film scrap, LDPE film, tyre wire scrap, used electric motor scrap, motherboards scrap, used conveyor belt, tyres scrap, PVB film, pet film scrap, latex gloves, PA6 yarn, PET bottles scrap, PU foam scrap, EPS blocks, copper cables scrap, compressor scraps, bopp film scrap, cast iron scrap, baby diaper scraps, used engines, tires scrap, tyres scrap.
Electric cart SPECIFICATIONS: Dimensions: Total Length mm 930 Width mm. 650 Height mm. 1070 Floor Length mm 870 Width mm. Ground Clearance 620 mm. 330 Weights: Total kg including batteries. 77.90 Batteries kg. 13 each. x 2 Motor: Permanent magnet motor with electric 200 W - rpm 120 - 24 V electro 24VDC 2Nm. Voltage and batteries: no Two 12V batteries 32 A C5 sealed gel - series connection, without maintenance. External charger 24 v - 8 ampere - Electronic microprocessor - Power supply 220 v. Brakes: Electric brake block engine, listing in the event of power failure. braking on deceleration (engine braking) enhanced in the calibration of the parameters of the controller. Speed and Capacity (performance with the vehicle in perfect working order on flat surface: Max 5 Km / h + / - 10% Max 250 kg. terms and 100kg. slope of 15%. Maximum flow rate is considered with the load distributed uniformly on the floor. Tires: 2 wheels rubber tires mounted on rims with pneumatic 3.00-4 6-ply roofing. 2 wheels 200x50 diameter core polypropylene gray synthetic rubber ring mounted on swivel mounts. Frame: Tubular steel and Fe 37 powder-coated polyester for outdoor Ral 6018 Spare parts and tools for the maintenance and repair: Original spare parts and tools for maintenance and repair are provided directly to order from Italy Bigà spa. Sound level values: less than 70 dB (A)
5 - Foot sheet chariot 5.1 Dimensions: Total length 930 mm Width 650 mm Height 1070 mm Plan Length Width mm 870 mm 620 mm Ground clearance 330 5.2 Weights: Total 77.90 kg including batteries Batteries 13 kg each. x 2 5.3 Motor: Permanent magnet motor with electric 200 W - rpm from 120 to 24 V electro 2Nm 24VDC. 5.4Voltaggio and batteries: N. 2 x 32 A 12 V sealed gel in C5 - series connection, maintenance-free. External charger 24 V - 8 amp - Electronic microprocessor - Power supply 220 V 5.5 Brakes: Electric brake to the engine block, insertion of a power failure. Braking on deceleration (engine braking) enhanced in the setting of parameters control unit. 5.6 Speed and Capacity (performance of the vehicle in perfect working flat route: Maximum speed in 6 seconds of continuous accelerated 5 km / h + / - 10% Max capacity 250 kg and 100kg in terms of gradient of 15%. The maximum flow is considered with uniformly distributed load on the floor. 5.7 Tyres: 2 rubber wheels mounted on wheels with pneumatic 3.00-4 6-ply roofing. 2 wheels 200x50 core diameter polypropylene ring mounted on gray synthetic rubber supports swivel. 5.8 Structure: Tubular and sheet S 235 JR polyester powder coated RAL 6018 external 5.9 Spare parts and tools for maintenance and repair: The original spare parts and tools for maintenance and repair are provided directly Order by Biga spa Italy. 5.10 Values sound level: less than 70 dB (A) 5.11 Environmental conditions: temperature + 5 + 40 C Humidity 50%.
The coex bubble plant, represents the state-of-the art machine among the torninovaÆs production range . It has got all the most sophisticated technologies for air bubble film production, in order to ensure the easy production to the customer, thanks to the full automation of the co-extrusion process, to reach a film with air-barrier effect, that keeps the air inside the bubble for a longer time. The main advantages of such air bubble film are: Better cushioning protection compared with a thicker mono-extruded bubble film: the co-extruded bubble film offers higher air retention (thanks to the internal layer of PA6) and then ensures effective long-term cushioning performances from packing to final delivery. It means also extra strength of each bubble and then extra protection of the goods. Better protection with thinner plastic film: it means better performance with less raw material consumption. Reusable : his long lasting cushioning performances allows to use the same air bubble film for many times. Recyclable : the co-extruded bubble film could be recycled with other polyethylene material An air bubble film of 35 g/,2, produced by co-extrusion process, can be compared, in terms of resistance, with a mono-extrusion air bubble film of 55 g/m2. They have same resistance. Considering such relationship, it means that you save the 30% of the cost for raw materials, by using co-extrusion production process. Mainly, it is composed by three extruders: one for PE layer, one for the PA6 layer and the third one for the TIE layer between PE and PA6. These three extruders, through the last generation of feed-blocks with adjustable geometry allow the production of the special co-extruded air bubble films with ABCBA structure. You can easily understand the co-extrusion process through the following layout: The COEX BUBBLE plant has got the following features: Extruders with a.c. motors mounted in axis and with universal screws in wear-resistant steel, with modular profiles with barrier double thread, in different diameters according to the level of production requested. Every extruder is equipped with a filter and a gear pump with transmission by cardan joint and motor with inverter and feedback loop control. The gear pump, through PID control, adjust automatically the speed of the extruder according to the capacity requested by the production formula and to the desired extrusion pressure. Two separated flat dies for an excellent control and adjustments of the produced films, realized in steel with adjustable deliveries. The feed-block with adjustable geometry, allows the distribution uniformity of the internal layer of polyamide (PA6) on the whole width of the film, also with thickness less than 0.5 micron. Gravimetric blending and metering for the ingredients, for a more accurate and automated management of the granules to be extruded. Forming unit climbed on guide and rack arms that allow the automated movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials delivery from the flat dies and for its fast interchangeability. Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant . The production control occurs by formula that the operator can personalize according to the co-extrusion percentage he needs and to the speed of production. The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature. Width of the produced film: from 1.000 mm up to 2.500 mm (or more on request) The plant can be equipped (also after installation, thanks to its modularity) with several accessories: Moulder cylinder with bubble in different diameters Perforation unit with brushless motor Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder Fast Loading system on the rewinder, that allows, in automatic way, to unload the produced roll with closing system by glue and the loading of the new carton core with application of ôhot-meltö glue. The machines are fully customizable. Contact us to project the most suitable plant for your production and market necessity.
Clamps.
Used equipment for the extraction and processing of granite, marble, stone. - Gang-saw, block-cutter, multiwire - Lines for producing tiles, slabs, pavers, mosaics, ... - Polishing machines and lines - Water treatment and recycling plants - Bridge saw and working centers 3 - 6 axes - Flaming, bucharding, sandblasting, ... - Edge polisher - Machines with disk 2000 - 3500 mm - Resin plants - Waterjet - Lathe - Gantry and Derrick crane - Quarry technical and equipment - ..... Donatoni, Gmm, Breton, Simec, Pedrini, Gaspari, Pellegrini, Bidese, Bisso, Cms, Cobalm, Cofiplast, Denver, FMeccanica, Sassomeccanica, Noat, Omag, Brembana, Terzago, Fraccaroli, Omec, SEI, Comandulli, Minali, Gregori, Intermac, Wires Engineering, BM, Kofmann, Marchetti, Saba, Barsanti, Prussiani, Micheletti, Zambon, Benetti, Comet, Monlevi, Cemar, Maema, Cortan, Waterjetitalia, Giacomini, Fado, Rts, Montressor, Marmomeccanica, Blandini, Carrara, Socomac, Protec, Mec, Bellani, Bavelloni
Used monowire and multiwire stone cutting machines. Squaring of blocks, cutting into slabs and big thickness. And also for profile cutting. Up to 72 wires. Breton, Simec, Pedrini, Gaspari, Cofiplast, Pellegrini, Bidese, Barsanti, Micheletti, Socomac, Wires Engineering. And also the whole range of used equipment for the extraction and processing of granite, marble, stone. From mining and block cutting to any finished product (Italy).
Polyurethane foam blocks, polyurethane foam sheets, mattresses.
Hot-rolled steel channels This type of channel is produced according to GOST 535-88 with parallel flanges and sloping flanges: 10, 10P and etc. The slope of inner flanges must not exceed 10%. Assortment of the steel hot-rolled channel corresponds to GOST 8240-89. The number of the channel corresponds to its size (distance between the inner flanges) expressed in cm. For example: Channel #10 - distance between the inner flanges equals 10cm. All other parameters: flange width, wall thickness and etc. according to GOST. Channel that has letter A at the end of the number (14A) is a channel with sloping inner flanges, it means the flanges are wider and hence the weight of each meter is larger than ordinary channel. There are special types of hot-rolled channel: special channel for automotive industry - GOST 19425-74 (18S, 20S); special channel for wagon production - GOST 5267.1-90 (8W, 14W, 18W).
I-BEAM- double flanged - this type of products include hot rolled double flanged beams (I-beams), produced according to GOST 535-88. I-Beams are separated into several types: I-Beams with parallel flanges normal (20B, and etc.) wide flanges (20Sh and etc.) column (20K and etc.) I-Beams with sloping edges of flanges normal (edge slope 6-12%) GOST 8239-89 (â??10, 12, 16 and etc.) Assortment of such I-Beams corresponds to GOST 8239-89. Special (M and C): M - for hanging rails (edge slope not more than 12%): 18M, 24M, 30M and etc.; C - for reinforcement of mine shafts (edge slope not more than 16%): 14S, 20S and etc. Assortment of such double flanged beams corresponds to GOST 19425-74. The number of the I-beam is its conventional size (height) in cm.
Assortment corresponds to GOST 8509-93. Precision classes: A - high precision; B - ordinary precision. The number of equal flange steel corresponds to flange width, expressed in mm. For example: Angle 25 -flange width 25mm. All other sizes (wall thickness and etc.) according to GOST (shown in the table of GOST book of reference).
Hot-rolled flat bar - the most sought-after type of strip. Distinguish rolled dimensional (length 0.6 and 1.2 m), a multiple of the measured length and unmeasured (length 0.2 - 0.6 m). At the same time, a bar with a thickness of up to 4.5 mm is produced with a width of all sizes provided for by GOST. In accordance with GOST 103-76, the size of this product may vary in the range:length - 2-10m; width - 20 200 mm;thickness - 4 - 40 mm.
The material of manufacture and the range of the round bar in accordance with GOST 2590-2006, where the bar can be made of steel of the following grades: carbon (St3, St20, St35, St45); low alloyed (Steel 40X, Steel 40XH); high-alloyed (08 18 10, 38XH3MA, 40 2 14 17 2 and others), high-speed (U7; U7A; U8A)
