EN590 Diesel (10PPM) ULSD (Ultra Low Sulfur Diesel) is a premium diesel fuel that conforms to the European standard EN590, with an ultra-low sulfur content of only 10 parts per million (PPM). This type of diesel is known for its environmental benefits and is widely used in modern diesel engines.
Specifications Rated Output 419 kW 57 mhp Rated Speed 3000 rpm Displacement 219 L 134 cu in No of cylinders 4 cylinders Cylinder Bore x Stroke 88 mm x 90 mm 346 in x 354 in Combustion system Direct Injection Bosch Common Rail System Aspiration Natural Alternator 12V 125A Dry weight without gear 220 kg 485 lbs Dimensions 870 mm x 589 mm x 627 mm Controls Mechanical optional VC10 system Certifications RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS NOTE 1 kW 13596 mhp 134102 bhp Fuel condition density at 15C 0842 gcm Technical data is according to ISO 8665 ISO 3046 Fuel temperature 40C at the inlet of the fuel injection pump ISO 8665 Length includes KM35P marine gear Dimensions may vary with other gearselbow Standard Engine Package Exhaust mixing elbow Ltype Alternator 12V 125A B25 panel Flexible mounts Mechanical throttle sensor Fuel prefilter with water separator Fresh water expansion tank Belt safety cover Optional Accessories Highriser mixing elbow instead of Lelbow Secondary alternator 12V 125A or 24V 60A C35 panel Extension harness 3m 5m 10m Second station TFX Sidemount control head VC10 Vessel Control System NMEA2000 Engine monitoring system Semi 2pole SOLAS including Certificate factory fit only Hot water kit with cocks Extension saildrive leg 75 mm Propeller cone nut kit SD60 Onboard spare parts kit
Specifications Rated Output 588 kW 80 mhp Rated Speed 3200 rpm Displacement 2 L 122 cu in No of cylinders 4 cylinders Cylinder Bore x Stroke 84 mm x 90 mm 331 in x 354 in Combustion system Direct Injection Bosch Common Rail System Aspiration Turbocharged Intercooled Alternator 12V 125A Dry weight without gear 229 kg 505 lbs Dimensions 909 mm x 613 mm x 675 mm Controls Mechanical optional VC10 system Certifications RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS NOTE 1 kW 13596 mhp 134102 bhp Fuel condition density at 15C 0842 gcm Technical data is according to ISO 8665 ISO 3046 Fuel temperature 40C at the inlet of the fuel injection pump ISO 8665 Length includes KM4A2 marine gear Dimensions may vary with other gearselbow Standard Engine Package Exhaust mixing elbow Ltype Alternator 12V 125A Seawater pump rear mounted B25 panel Flexible mounts Mechanical throttle sensor Fuel prefilter with water separator Fresh water expansion tank Belt safety cover Optional Accessories Highriser mixing elbow instead of Lelbow Secondary alternator 12V 125A or 24V 60A Seawater pump front mounted C35 panel Extension harness 3m 5m 10m Second station Sidemount control head VC10 Vessel Control System NMEA2000 Engine monitoring system Semi 2pole SOLAS including Certificate factory fit only Opposite dipstick Hot water kit with cocks Extension saildrive leg 75 mm Propeller cone nut kit SD60 Onboard spare parts kit
Technical data OXE Kreta Engine type: Diesel, L4 Displacement: 2.0 L Intake: Turbocharged, intercooled Torque: 380 415 Nm at 2500 rpm Power: 150 200 HP at 4100 rpm Fuel: Diesel Weight: 340 kg Alternator output: 130 Amp Rig length: 25 or 33 Cooling: Closed cooling circuit Starting: Electric Steering: Electronic Power Steering Shift: Elecro-hydraulic Clutch: Hydraulic multi-friction plate Gear ratios (interchangeable): 1.73:1 and 2.17:1 Dimensions (25 leg), LHW 994x1880x678 mm Optimised for tenders: Yes
Technical Data Engine type: Diesel, L4 Displacement: 2.0 L Intake: Turbocharged, inter-cooled Torque: High Speed: 380Nm (280 ft-lb), 607NM (447 ft-lb) @ 2500 RPM Power: 175 HP at 4100 RPM Fuel: Diesel EN 590, ASTM D 975 No.1 No.2. JIS KK2204, F54 & F75 Weight: 350 kg Alternator output: 130 Amp Rig length: 25 or 33 Cooling: Closed cooling circuit Starting: Electric Steering options: Hydraulic, Electronic Power Steering, Joystick Shi�¿t: CANbus, Electro-hydraulic Clutch: Hydraulic multi-friction plate Gear ratios: 1.73:1 and 2.17:1 Dimensions (25 leg), LHW 994x1880x678mm
Technical data - OXE 200 Engine type: Diesel, L4 Displacement: 2.0 L Intake: Turbocharged, inter-cooled Torque: 415 Nm at 2500 rpm Power: 200 HP at 4100 rpm Fuel: Diesel EN 590, ASTM D 975 No.1 No.2. JIS KK2204, F54 & F75 Weight: 350 kg Alternator output: 130 Amp Rig length: 25 or 33 Cooling: Closed cooling circuit Starting: Electric Steering: Electronic Power Steering Shi�¿t: CANbus, Electro-hydraulic Clutch: Hydraulic multi-friction plate Gear ratios: 1.73:1 and 2.17:1 Dimensions (25 leg), LHW 994x1880x678mm
Specifications Rated Output 80.9 kW / 110 mhp Rated Speed 3200 rpm Displacement 1.995 L / 121.7 cu. in No. of cylinders 4 cylinders Cylinder Bore x Stroke 84 mm x 90 mm / 3.31 in x 3.54 in Combustion system Direct Injection, Bosch Distributor Type VE Pump Aspiration Turbocharged & Intercooled Alternator 12V - 125A Dry weight without gear 217 kg / 478 lbs Dimensions 933 mm x 661 mm x 659 mm Controls Mechanical Certifications RCD 1 EPA Tier 2 BSO II EMC SOLAS NOTE: 1 kW = 1.3596 mhp = 1.34102 bhp Fuel condition: density at 15 C = 0.842 g/cm Technical data is according to (ISO 8665) / (ISO 3046) Fuel temperature 40 C at the inlet of the fuel injection pump (ISO 8665) Length includes KM4A2 marine gear (Dimensions may vary with other gears/elbow) Standard Engine Package Exhaust mixing elbow [L-type] Alternator 12V 125A B20 panel Flexible mounts Expansion tank for fresh water cooling system Electric stop solenoid Optional Accessories High-riser mixing elbow [instead of L-elbow] Secondary alternator 12V â 130A or 24V 75A including smart regulator C30 panel Extension wire harness [4m, 6m, 10m] Dual harness [for 2nd station] TFX Sidemount control head SOLAS including Certificate [factory fit only] Hot water kit with cocks Extension saildrive leg [75 mm] Propeller cone nut kit SD60 Air heater [glow] Trolling valve [only for KMH4A] On-board spare parts kit
Technical Data Engine type: Diesel, L6 Displacement: 3.0 L Intake: Turbocharged, inter-cooled Torque: 680 Nm (501ft-lb) at 1750 RPM Power: 300 HP at 4200 - 4400 RPM Fuel: Diesel EN 590, ASTM D 975 No.1 No.2. JIS KK2204, F54 & F75 Weight: 395 kg Alternator output: 180 Amp Rig length: 25â?? or 33â?? Cooling: Closed cooling circuit Starting: Electric Steering option: Hydraulic, Electronic Power Steering, Joystick Shi�¿t: CANbus, Electro-hydraulic Clutch: Hydraulic multi-friction plate Gear ratios: 1.39:1 Dimensions (XL 25â?? leg/ XXL 33" leg), LHW XL, 1150x2090x700mm. XXL, 1150x2293x700mm (CC32")
Technical Data Engine type: Diesel, L6 Displacement: 3.0 L Intake: Turbocharged, inter-cooled Torque: 680 Nm (501ft-lb) at 1750 RPM Power: 300 HP at 4200 - 4400 RPM Fuel: Diesel EN 590, ASTM D 975 No.1 No.2. JIS KK2204, F54 & F75 Weight: 395 kg Alternator output: 180 Amp Rig length: 25 or 33 Cooling: Closed cooling circuit Starting: Electric Steering option: Hydraulic, Electronic Power Steering, Joystick Shit: CANbus, Electro-hydraulic Clutch: Hydraulic multi-friction plate Gear ratios: 1.39:1 Dimensions (XL 2 leg/ XXL 33" leg), LHW XL, 1150x2090x700mm. XXL, 1150x2293x700mm (CC32")
Auxiliary engine
Heavy Fuel Oil (HFO) is a residual fuel incurred during the distillation of crude oil. It is primarily used to generate motion and/or heat that have a particularly high viscosity and density. Mainly used in industrial boilers and other direct source heating applications. It is also used as a principal fuel in marine applications and large diesel engines. Generally HFO typically includes bitumen, asphaltenes and long chain polycyclic aromatic hydrocarbons.
DIESEL FUEL OIL D6 Minimum Quantity : 25,000,000 Gallon Maximum Qty 50,000,000 Gallon FOB Price : $2.00 USD / Gallon CIF Price : $3.00 USD / Gallon Commission : $1 USD Seller side, $1 USD Buyer side Delivery Terms: CIF / FOB Shipment. Payment Term: MT103 TT Wire Transfer. Quality : Q&Q test report will be conducted at the loading port by SGS equivalent at the expense of the seller. Products Origin: KAZAKHSTAN. Contract Term: 12 Months minimum after first successful trial (with rolls and extensions). PORT OF LOADING: JURONG PORT, SINGAPORE, AKTAU, PAVLODAR, KURYK, FUJAIRAH, VLADIVOSTOK, ROTTERDAM AND HOUSTON PORT. Contact us for detail procedure of CIF/FOB/TTV/TTO.
Rent Harbour Tug Boat, Azimuth Stern Drive Hight Horse Power Engine..
Marine diesel engine, inboard, outboard, genset.
Virgin Oil D6, also known as residual fuel oil, is a petroleum product that is obtained from the refining process. It has a high density and a high viscosity, making it a suitable heavy fuel oil used in large marine engines and power plants that require high levels of energy. Virgin Oil D6 is produced from the residue left over after the lighter hydrocarbons, such as gasoline and diesel fuel, are removed from crude oil. It is a heavy, black viscous liquid that is resistant to flow. The product has a high sulfur content, typically between 2.5% and 4%, and a calorific value of approximately 38 MJ/kg.
Marine Diesel Engine, Inboard, Outboard.
Used diesel and gas genset industry and marine engine.
Premium fuel adhering to European standards, ensuring clean and efficient engine performance with superior combustion efficiency and reduced emissions. Delivery Terms : CIF / FOB Shipment Payment Term : MT103 TT Wire Transfer Quality : Q&Q test report will be conducted at the loading port by SGS equivalent at the expense of seller Products Origin : KAZAKHSTAN Contract Term : 12 Months minimum after first successful trial (with rolls andextensions) PORT OF LOADING : JURONG PORT, SINGAPORE AKTAU, PAVLODAR, KURYK, FUJAIRAH, VLADIVOSTOK, ROTTERDAM AND HOUSTON PORT PORT OF DESTINATION / DISCHARGE : TBA PACKING : Bulk for Vessel Loading INSURANCE : 110% By Seller DELIVERY : : Within 2-4 Weeks, From the Date of Approval of Documents, Depending Upon Availability Of Vessel. INSPECTION : All Products Are Quality & Quantity Wise Certified By SGS. PAYMENT TERMS : To Be Discussed
Engine Spare Parts Automobile Engines Diesel Engines .
Machine, Engine, Etc.
