Steam Boiler Supply
Reboiler
Bioreactor
Monoblock burner for all types of heating application like boiler, oven, hot air generator, dryer, furnace, melting furnace, heat treatment. Standard.
Industrial oven Industrial fabrication, chemical plant equipment,pharma machinery, pressure vessels, heat exchangers,reactors, ballmills, industrial ovens,air receivers,surface treatment plants, filtration equipmentsi in ss, ms, alloy steels per piece
Coke Less Blast Furnace
Product Description - DRI Price of product ( USD price or FOB price) - RS 150000.00
Rotary Hearth Furnace Based Pig Iron This is the Latest Technology to Produce the Pig Iron or MS Iron out of the Iron Ore Fines and Non-coking Coal. In this Technology, the Coal Consumption is the minimal as compared to the Tunnel Kiln Process or Rotary Kiln Process. Through RHF, either Pig Iron (Fe=96-97% C=3.0-4.0%) or MS Steel (Fe=99% C=0.2% Mn=0.3% etc) or HBI (Hot Briquetted Iron) (Fe=92% C=0.25%) can be made, depending upon the requirement. The entire time for the Reduction, Melting and Product Out will be around 45 min, so the larger capacity of the Plants can be made. This process is also Lowest Space Consuming Plant. The Best Part of this Technology is that we can Product the Ferro Alloys too, like Ferro Nickel (Fe-Ni), Ferro Chrome (Fe-Cr) or Ferro Vanadium (Fe-V) etc from the same Plant, by implementing different Parameters of Operations. We can Control the Low Carbon Ferro Chrome, MS Steel and many more.
Continuous Coconut Shell Carbonization Furnace This machine is equipped with:Auto-feeding Conveyor, Biomass Gasifier equipment, Dust-Removal Device, Gas cleaner system, PLC controlled and manual / automatic dual- control System, Cooling and Discharging conveyor, Carbonization Furnace and other equipments. While Carbonization of the raw material inside of the Carbonization Furnace (like coconut shell, sawdust, Palm shell, rice husk, straw, wood scrap etc.), the produced Flue Gas is recirculated in pipeline and is fed back to Heating System after purification, becomes combustible gas (carbon monoxide, methane, ethane). When the temperature reached, Carbonization furnace starting carbonizing the raw materials fed, producing the flue gases, which becomes a combustible gas after spray pour, cooling purification by the cooling purification system, to continue the carbonization Process, then Gasifier stops working or set on the minimal use. Temperature is been regulated and controlled by control system. The Feeding of the Raw Material is also regulated for the Qualified End Product. Based on the requirement of the Plant ie output of the finished Product, we can deploy a set of Furnace or Bank of furnace to yield the desired production quantum. Plant Capacities : 300 kg/hr to 2000 Kgs/hr continuous type.
We are an Involved Manufacturer, Exporter, and Supplier Of INDUSTRIAL OVENS and other heating equipment since 1989. Our custom and standard industrial ovens are used for multiple applications including Baking, Drying, Finishing, Painting, Heat Treatment, Annealing, etc.
Twin Lobe Blower
Trading and exporters of high quality industrial, ovens, furnaces and Dryers, such as Brazing furnaces, Sintering Furnaces, Annealing Furnaces & all types of furnaces spares parts.
We are leading manufacturers of electrical heating elements since 1968.We specialize in air heaters, water heaters, oil heaters, cartridge heaters etc.We make air heaters, water heaters, oil heaters, cartridge heaters, flange heaters, alkali immersion heaters, band mica/ceramic heaters, tubular heaters import substitutes, thermocouples, control panels, ovens, bobbin heaters, furnace elements, oil/water pre heaters, out flow heaters, infrared heaters, d section heaters, finned strip heaters, etc.
AMRITA THERMAL EQUIPMENT are the manufacturer of Industrial Ovens in India. As an Industrial oven manufacturer, we have supplied many Industrial Ovens of Various types such as 1.Batch Oven, 2.Tray oven, 3.Trolley Oven, 4.Conveyor Oven, which operate in temperature ranges from 50ºC to 450ºC using electricity, gas, or oil. Applications include pre-heating, drying, curing, heat-treatment and burn-off to name a few. AMRITA make Industrial Oven is of triple wall construction with minimum of metal to metal contact to avoid Heat Bridge in structural design to minimize the conduction of heat emission & reduce energy consumption The Outer casing is made from MS coated with primers & then with 2 coats of enamel or epoxy paint or powder coated, thus giving rust proof & long lasting performance.
Business Type Manufacturer, Exporter Type Boiler Tubes Material Steel Shape Round Length 4000-5000mm Application Industrial Use Product Code Bs3059 Port India
Material Stainless Steel Voltage 220 V Capacity 0-2 Tph Power 1-3 kw Driven Type Electric Pressure High
Our vibrating furnace chargers are a onestop effective solution to problems such as higher labor costs and hazards faced by furnace operators in foundries melting shops etc Such automation allows foundry men to work at a safe distance thus preventing injuries arising out of molten splash Our vibrating furnace charger facilitates rapid and quick charging of the furnace thereby allowing maximum utilization of the furnace Advantages Very fast as compared to manual charging Minimum heat loss No chance of direct exposure of manpower to the furnace thereby preventing dangerous accidents due to mental splash Prevent damage to the furnace
About Mini Blast Furnace A Mini Blast Furnace (commonly known as Mandir Bhatti or Shahi Bhatti) is a simple, time-tested and widely used system to produce secondary lead in India and many other countries. It is the most basic of all furnaces and a production system based on this technology has certain distinct characteristics such as: Low Project Capital Cost Low Energy Cost (wooden coke fired) Easy to install Easy to operate & maintain Production of low Antimony Lead (soft lead) at low temperature Generates high pollution Description of Mini Blast Furnace The Furnace itself is a modified blast furnace which consists of a brick lined structure with fire brick oven in the midst and a metal Exo-skeletal structure outside. Raw material & fuel (coke) is charged manually through the side metal doors fitted in the brick structure and air is provided from the FD fans provided at the back of the brick structure. Molten metal & slag is tapped at the pits made in front of the brick structure and flue gases are sucked from the top of the brick structure which is provided with a metallic hood. A typical Double Oven Mini Blast Furnace has the following standard sizes & specifications: Outside Dimensions of Brick Structure: 2400mm L x 1900mm W x 2400mm H No. of Ovens: 2 Nos. Oven Size Top Dia: 600mm Bottom Dia: 250mm Depth: 650mm No. of FD Fans: 2 Nos. (1 for each oven) FD Fan Capacity: 300cmh at 250mm of WG No. of Charging Doors: 2 Nos. (1 for each oven) Charging Door Dimensions: 1100mm H x 650mm W Advantages No consumables used other than Wooden Coke which is also used as Fuel Low Power Consumption Produces low Antimony Lead suitable for soft lead purposes Pollution can be controlled with minimum fugitive emissions Easy to install, operate & maintain Disadvantages Cannot recover 100% lead in the first operation Subsequent recovery of lead after first recovery consumes higher coke & manpower. Equipment cannot be scaled up for higher production capacities. Air Pollution Control System for Mini Blast Furnace Various types of lead present in used batteries, plates and paste of lead oxide are charged in the furnace. In addition to these, certain compounds of sulphur are also present in the batteries. When this material is heated in the presence of carbon, lead oxide is converted to lead. This conversion along with burning of fuel generates flue gases and fumes containing dust, dirt, oxides of lead, lead particles and other impurities etc. Hence, to meet various goals of maintaining employees' health, for factory environments as well as regulatory requirements, it becomes imperative to get high end Air Pollution Control Systems to be installed with the Mini Blast Furnaces.
Thermic Fluid Heater
DE-108 MUFFLE FURNACE RECTANGULAR ALTIS MAKE Specification- Light weight ceramic fibre wool insulation (instead of Brick insulation). The outer casting is made of double walled thick P.C.R.C. Sheet, duly painted Heating elements are made of KANTHAL "A-1" wire and backed by high temperature cerwool insulation, which avoids loss of energy. Temperature is controlled through Digital Temperature Indicator-cum-Controller. To work on 220/230 volts or 440/440 volts A.C. Maximum Temp. 1200 degree C and working Temp. 1150 degree C. MUFFLE SIZE- 200 x 100 x 100 mm, RATING- 1.0 KW MUFFLE SIZE- 250 x 125 x 125 mm RATING- 2.0 KW MUFFLE SIZE- 300 x 125 x 125 mm, RATING-2.5 KW MUFFLE SIZE- 300 x 150 x 150 mm, RATING-3.5 KW MUFFLE SIZE- 300 x 200 x 200 mm, RATING-4.0 KW MUFFLE SIZE- 350 x 175 x 125 mm, RATING-4.0 KW MUFFLE SIZE- 375 x 175 x 175 mm, RATING-4.5 KW MUFFLE SIZE- 475 x 175 x 175 mm, RATING- 5.0 KW
