Thickness : 2mm to 5mm Size : 1300mm x 2500mm Packing : wooden pallet Weight : ~ 1300kgs per pallet Dimension : ~ 500mm x 1350mm x 2550mm
Thick : 2mm to 15mm Size : 1220mm x 2440mm Finish : frosted, smooth frosted, gloss Color : gold, silver, smoke, bronze, blue, red etc.. Packing : wooden pallet Weight : ~1300kgs per pallet Dimension : ~500mm x 1300mm x 2500mm
Plexicast-gp is cast-type, general-purpose grade acrylic sheet, fabricated by casting acrylic raw material into two smooth glass plates, and then followed by sheet formation in the heat water pool. Standard sizes 1220mm x 1830mm 1220mm x 2440mm 2050mm x 3050mm Packing details Standard wooden pallet (~1000-1300kgs per pallet)
Features: Tough plies of truck tire material or conveyor belt virtually eliminates chipping or abrasion, unlike molded rubber, extruded rubber or wood plank bumpers. Attractive deep black color enhances a neat, professional architectural look. Manufactured under pressure exceeding 1, 500 lbs. To absorb over 80% of impact force. Anchor bolts are protected by at least 3" of rubber to prevent damage. Applications Available in two models: bumpers with angles for most applications-- equipped with 1/4" steel angles on both ends; and bumpers with flat plate for use with dock levelers--optional 1/4" flat steel plate for one or both ends. Have unlimited applications in factories, warehouses and docks. Vehicle impact protection for loading docks. Projecting above low docks. Rub rails at the sides of truck wells. Wall bumpers to protect against fork lift trucks. Special construction features to accommodate unusual anchoring conditions. Benefits Provides protection against vehicle damage to docks, buildings and cargo. Absorbs over 80% of truck impact and shock to protect dock and building. Leading bumper sold in the industry today. Standard sizes shipped within 24 hours of order confirmation. Eliminates costly repairs from severe shock to loading docks. Constructed to last and provide years of protection. Maintenance free. 5 year warranty. Material Fabric reinforced rubber pads cut from selected recycled truck tires or conveyor belt. Rubber pads laminated between structural steel angles and secured with 3/4" steel tie rods. Rubber pads 4 1/2" or 6" thick. As per buyers' option
Dock fenders, laminated, molded and extruded rubber bumpers, steel-face dock bumpers, wall and corner guards, wheel chocks, speed bumpers, parking blocks, commercial and residential matting.
Various cast acrylic sheets, acrylic finished products, blocks, antiglare screen protector, 3D solid letter sign, cut sheet, light-guide panel, satin mirror decorative panel.Consultation services for plastic product fabrication
Charcoal briquette, desiccated coconut, coconut oil, coconut briquette, virgin coconut oil, dry coconut kernel, coco peat, coir block, coconut fiber, konjac rice, dry corn, merbau sawn timber, bangkirai sawn timber (red / yellow belau), meranti (red / yellow / dark red) sawn timber, kapur (comper) sawn lumber, keruing sawn timber, kempass sawn timber, decking in merbau / bangkirai / kapur / meranti, face veneer in keruing / meranti, bare core (fjlb) in merbau / bangkirai / meranti, plywood in keruing / meranti / albasia, laminated scantling in red meranti, wood shaving blocks in pine, albasia, mix wood, ferro nickel..
Specifications 105mm*155mm *Text description of the product Reject the sultry of the mask, breathe freely and freely, while blocking the pollution, effectively discharge the hot moisture, plastic nose bridge, anti-leakage, anti-fog. The fold line design, ultrasonic production, the mask is strong and durable
Pain relief is the most common use of magnets. Magnets increase the capillary blood flow which may help flush lactic acid and other inflammatory agents that build up tissue to ease pain and inflammation. The blood supply also carries oxygen which may be helpful in relaxing muscles and relieving cramps and spasms which are oxygen starved. This is the same reason massage is often used to loosen muscles in spasm; to allow block to flow and deliver oxygen necessary to terminate the spasm.
Central loose tube cable contains one tube with 2 - 24 fibers, which is filled with water blocking gel. A water swelling tape is helically wrapped around the cable core. Either aramid yarn or fiber glass is wound around the tube to provide physical protection and tensile strength. The cable is jacketed with PE for water protection purpose. For direct burial, steel wire armour and corrugated steel tape armour are applied with an optional PE
Pocket smoke mask The psm pocket smoke mask is a small, portable heat resistant hood that covers the entire head to the shoulders. Protecting eyes, nose, and mouth from lethal smoke and fumes. A special ionized filter blocks heavy smoke and allows you to breath while making your way to safety. Provides 20 minutes air filtering function. Small size packed in vacuum pack One size fit all person Easy and quick to wear 5 year shelf life
Product Name: Disposable Surgical Mask. Hong Kong brand HKLove's Family Mask Mask factory that you set up, everyone can feel at ease! Obtained SGS verification from an international testing agency The mask passed the "hygienic test" and "filtering efficiency" test ð???PFE (Particle Filtration Efficiency) 99% ð???BFE (bacterial filtration efficiency) 99% Three-layer structure-effectively block 99% of droplets and floating particles, dust, pollen and germs in the air Outer layer waterproof ~ Effectively block saliva, spray The mask workshop is a "100,000-class dust-free workshop" to ensure that the mask production meets sanitation. â? Production place: Shenzhen â?Size: 17cm x 9.5cm â? Quantity: 50 pcs per box Packaging: 50 pieces / Box; 40 boxes / Carton; -, Delivery: Loose cargo; 20container for 550,000 pieces (11,000 boxes); Delivery Fee: On Buyer; -, Price: FOB China, USD0.64 / piece for FFP3 Surgical Mask;
FDA Certified and CE Approved KN95 Face Respirator Mask. This KN95 protective mask effectively filters non-oily particles to serve as barrier to potential air pollutants that can be harmful. The face maskâ??s filtration efficiency of 5 layers will help block out PM2.5 air pollutants like allergens, virus, bacteria, dust, droplets and other harmful non-oil based particles in the air, at least up to 95 percent. It also features an adjustable nose wire to provide proper and comfortable fit to the face contour. 1 pack consists of 20 counts of KN95.
The PSM pocket smoke mask is a small, portable heat resistant hood that covers the entire head to the shoulders. Protecting eyes, nose, and mouth from lethal smoke and fumes. A special ionized filter blocks heavy smoke and allows you to breath while making your way to safety. Provides 20 minutes air filtering function. Small Size packed in Vacuum Pack One Size fit all person Easy and quick to wear 5 year shelf life Small Size packed in Vacuum Pack
Gigabit ethernet 8 port switch hub Features : - 8 x RJ-45 10/100/1000Base-T Port (Auto MDI-MDIX) - Full Duplex 1000 Mbit/s - Full and Half Duplex 10/100 Mbit/s - Supports auto-sensing for speed and duplex capability - Store-and-forward operation support - Performs full wire-speed switching with Head of Line (HOL) blocking prevention - Embedded 128K Byte SRAM for packet buffer - Support packet length up to 1522 bytes - Support 9K byte JUBMO packet - Integrated two-way Address-Lookup engine and table for 4K MAC addresses - Full-duplex IEEE 802.3x flow control - Half-duplex back pressure flow control - Smart flow control for mix-speed connection - 8-port Gigabit Layer 2 Switches 20 pcs per cartoon
Applications: Long distance telephone, catv, data communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct Burial (with armouring). Construction: The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500n (short term installation); 900n (long term installation) Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter) Twist (torsion length): 125 x overall diameter Working temperature: -20íµ ~ +70íµ (pe sheath) Storage temperature: -40íµ ~ +70íµ (pe sheath) Product highlights: Small diameter and light weight. Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber Cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress And achieve better flexibility. íewide operating temperature range. Roll, box, drum
Applications: Long distance outside telephone, catv, data, communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial (with armoring). Construction: The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation) Minimum bending radius: Short term installation: 20 x overall diameter Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored) Twist (torsion length): 125 x overall diameter Working temperature: -40íµ ~ +70íµ (pe sheath) Storage temperature: -50íµ ~ +70íµ (pe sheath) Product highlights: All the fiber containing tubes are placed in concentric layers around the central member; through the control of The twist length, the fiber cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene, Are placed at the centre of the cables. Roll, box, drum
PORCELAIN TILES 600 * 600 mm , AAA class
Product: Balsa Clear Wood Origin: Brazil Usage: N/a Product Dimensions, Quantities & Price BALSA CLEAR WOOD 1) Density average: 180kg/m3 (+ 10kg); 2) Moisture content: < 10%; 3) Length: 1300mm (+ 10mm); 4) Width: > 50mm; 5) Thickness: 50mm (+ 5mm) 6) Quality required: a. Not allowed Mildew, collapse, honeycomb check, tree core, cork, encased knot, crack. b. Cavity: diameter less than 1.5mm is acceptable, diameter greater than 1.5mm is not acceptable. c. Honeycomb: individual cells with a diameter of less than 3.2 is acceptable d. Stains: a maximun of 10 percent of the strips have slight stains. e. Bottleneck check: bottleneck cracks of less than 30mm above the block are acceptable. Quantity: 60 CBM (01 x 40 FCL container) Price FOB (BRASIL): USD 730/CBM Price CIF (CHINA): USD 785/CBM POL: Santos, Paranagu, Itaja� or Navegantes. PRODUCT PAYMENT & CONDITIONS Payment: - First three shipments: T/T in advance (50% in advance, 30% in wood production completion inspection, 20% balance against shipment document). - 100% with DLC (transferable, irrevocable, operative, revolving, negotiable, confirmed bank top 50). Shipment: 60 days after advance payment or 75 days after receiving and acceptance of the DLC.
Product name: Medical protective mask(4-Ply KN95 Medical Respirator) in FFP2 Standard. Product model specifications: 17.5cm 9.5cm (single earband :18cm) Structural composition: The medical protective mask is composed of a mask body, a nose clip and a mask band. Scope of application: It is used to filter particulates in the air, block droplets, blood, body fluids, secretions, etc. in the medical work environment. Instructions for use: 1. Hang the mask strips on the left and right sides of the ears separately; 2. Align the nose clip to the nose, and gently pinch the nose clip to shape it, so that the nose clip is suitable for different face shapes; 3. Pull the fold of the opening mask and adjust it to seal the nose and mouth. Main performance: 1. The product should be sterile; 2. The residual amount of ethylene oxide should not exceed 10 3. Meet the requirements of China standard GB2626-2006 "Technical Requirements for Medical Protective Masks". with CE certification complied with standard FFP2 EN149: 2001+ AI:2009 Contraindications: None. Precautions: 1. Please read the instructions carefully before use, and use it within the warranty period. 2. This product is sterilized, aseptically packaged, and is only for one time use. Pay attention to check the packaging when using, if the packaging is damaged, it is prohibited to use. 3. After using this product, it should be disposed of as required by the medical institution or environmental protection department. 4. This product is disposable mask type. It must be replaced with a new one after being worn for 4-6 hours, and it can be discarded after use. Storage and transportation conditions: The packed medical protective mask is stored in a room with normal temperature, relative humidity ventilated and non corrosive gas. During transportation, it should be protected from moisture and sunlight. Packing : 3pcs/Individual bag, 500 bags(1500pcs)/Carton Carton Dimension : 60x40x50cm Gross weight: 9.05kg PRODUCT DISPLAY KN95 PARTICULATE RESPIRATOR