Bicycle bottles, High quality for the caps and bottle, No leaking, good construction, Food-grade material. 24pcs/ctn, 49.5x32.5x20.5, dhl packet, < 2kgs.
Application: RENAULT TRUCKS KERAX (97-) 290 RENAULT TRUCKS PREMIUM (96-) 210 D Core Size: 617 x 461 x 16 mm Without A/C Drier Packaging Size: 78,3x56,4x5,8 cm Gross Weight: 3,7kg
Ammonia is a colourless gas (99.9% concentrated) with a strong characteristic odour. It is available in gaseous form and boils at -34C. In a liquid state, ammonia has to be transported under pressure or in a refrigerated state. The molecular formular is NH3. Ammonia contains about 82% nitrogen. Ammonia reacts strongly with acids to produce salts: Nitric acid into ammonium nitrate, sulphuric acid into ammonium sulphate, phosphoric acid into ammonium phosphates and hydrochloric acid into ammonium chloride.
EN 590 Gas Oil is a 10 ppm (parts per million) sulphur content gas oil. It has a higher cetane number than A2 Class Gas Oil (another 10ppm sulphur content class of red diesel), making it better suited to internal combustion engines in off-road vehicles. Its parameters include density at 15C (typically at this temperature it will have a density of 0.856kg/m3 with a minimum of 0.82kg/m3 required), a typical 0.1% carbon residue value (where the maximum permitted for this grade is 0.3%). The minimum flashpoint (the lowest temperature at which the fuel produces vapour that is an ignitable mixture in air near the surface of the liquid) is 56C.
We aould like to offer you double armchair / coffee sofa set left and right, perfect for companies waiting rooms, hairdressers...Etc -
The CNC3200A is the optimal solution to manufacture double sided circuits. The standard configuration includes an automatic replace tool system and a high-precision screw made in Germany. Equipped with a three axis controller and a high precision step motor to control the X, Y and Z-axis. Features: A. advanced: suit for double side PCB ,can engrave ,drill, cut the PCB. B. effective: it takes only several minute to finish one PCB. C. high precision: Standard configure Germany precision screw and three axis controller with high precision step motor; control the X Y Z axis precision to make sure the high precision. D. convenient: software installation is easy and suit for variety PCB. E. confidential: no need outsourcing processing ,lab can finish the whole process . F. software is powerful, convenience and fast, have memories for processing, can continue to work when interrupt at any process. G. With three face transparent sound insulation dust-proof covers, suitable for teaching demonstration and observation angles, and the front door with safety device to protect the safety of operators H. standard configure tool cooling system, can prolong the lifetime of the tool, also can improve the precision. I. Carving process can remove the excess of copper all laid or remove the copper on the line, remain the excess copper, saving time and improve the effective. J. multi-function transfer software is suit for variety PCB design software. K standard configure automatic replace tool system, can automatically replace 9 pcs tools, extend up to 18 pc tools (optional). L. Configuration sound insulation dust cover, and safety device, can make sure the safety of operator when working. Technology parameters: 1. Min line diameter: 4mil 2. Min line width: 0.15mm 3. Minimum insulation spacing: 0.15mm 4. Repeated precision: 0.02mm 5. Min hole diameter: 0.15mm 6. Transmission resolution: 0.001mm 7. Work table: 310*410*130mm, work size: 500*375mm 8. Spindle speed: 10000-60000RPM Infinitely adjustable, spindle power: 200W to 250W. 9. Three axis speed: 100*100*100mm 10. Automatically replace tools: 9 pcs tools, 3mm - 3.175mm, can add up to 36pcs tools. 11. Drilling speed: Max 100pc/min 12. Transmission way: standard configure Germany precision screw and three axis controller with high precision step motor, Pneumatic tools chuck, fabrics hood. 13. Flatness compensation: The flatness of PCB make assures high-precision results. 14. Lighting device: With lighting device, convenient to view the engraving process. 15. Dust collection device: professional dust collection device to assure that the inner body is clean, which is makes the engraving process viewable. Optional: Use of vacuum worktable. 16. Software: Includes a professional automatic tool, multi-axial engraving software, easy to input NCP, PLT, DIN 66025 format. 17. Protective cover: can view at 360 angel, also with safety switch to make sure the operator’ safety. 18. Operating system: Win98/ 2000/ XP 19. Min memory: 512MB 20. Handheld magnifying glass: Magnification of 40 times with mm scale and lighting. 21. Special air pump: 30L air cans, max air pressure is 8 bar, air flow is 100 L/min. 22. Dimension: 700*700*700mm 23. Speed of no load: 100mm/s 24. Trough mill speed: 6mm/s
Duct-Baling-Press TypeBP 4000 V / 19,5 This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 400 kN. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by photoelectric barrier. Technical Data: Drive:..................................19,5 kW/400 V/50 Hz Pressure:...............................400 kN/m¦ Volume/stroke:.....................1,0 m¦ Cycle time:............................28 sec Feed opening:......................1350x820 mm Bale dimensions:..................800 x 900 x 600 ..............................................1.200 mm No of tightening wires:..........4 Press length:.........................5750 mm Press width:..........................2050 mm Press height with funnel:......1925 mm press height complete:.........2360 mm Weight:..................................6100 kg
FAKT BP 5000 This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device and a three-sided duct cross sectional adjustment device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 600 kg. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by a photoelectric barrier. Technical Data: Drive:...................................35 kW/400 V/50 Hz Pressure:..............................600 kN/m¦ Volume/stroke:....................1,3 m¦ Cycle time:...........................19 sec Feed opening:......................1350 x 1160 mm Bale dimensions:.................1100x750x600 .............................................1.200 mm No of tightening wires:..........4 Press length:.........................6850 mm Press width:..........................2650 mm Press height with funnel:.....2150 mm press height complete:........3700 mm Weight:..................................14600 kg Basic equipment - Touchpanel - photocell control - bale longimetry - fully automatic three-sided duct cross sectional adjustment device - free pitching device - fully automatic binding - 4 pieces wire coil stands large - 4 pieces wire bags for 40 kgs spools - electric control ready to plug in (SPS Siemens) engineering und documentation space assignment plan plans of electric control operation manual security instructions
SBP 200 This cabinet bale press has a large filling volume with easy filling due to a large filling opening. Knuckle-joint press pistons with thrust-twist motion for pressing operation. Simple operation due to two-hand-handling absolutely safe. Hoop band positioned visibly and easy to change. This system has a bale ejection aid. This press enables a trouble free operation due to the compact and strong construction. Technical data: Pressure:............................200 kN/m2 - abt. 20 t Drive:..................................4,0 kW/400 V/50 Hz Cycle time:..........................40 sec. Feed opening:.....................1200x700 mm Bale dimensions:................1200x700x500 ..........................................up to 800 mm weight of bale:.....................50 up to 200 kg press length:.......................1990 mm press width:........................1360 mm press depth:........................1170 mm weight.................................1300 kg electric control ready to plug in
SBP 100 This cabinet bale press has a large filling volume with easy filling due to a large filling opening. Knuckle-joint press pistons with thrust-twist motion for pressing operation. Simple operation due to two-hand-handling absolutely safe. Hoop band positioned visibly and easy to change. This system has a bale ejection aid. This press enables a trouble free operation due to the compact and strong construction. Technical data: Pressure:............................100 kN/m2 - abt. 20 t Drive:..................................4,0 kW/400 V/50 Hz Cycle time:..........................40 sec. Feed opening:......................600x600 mm Bale dimensions:.................500x700x500.- 900 mm weight of bale:.....................50 up to 80 kg press length:.......................1120 mm press width:.........................830 mm press height:.......................2000 mm weight.................................980 kg electric control ready to plug in
Window regulator, power window, window lifter, transmission, turbo charger for Asian and european cars and trucks.
Car spare parts. .Trade and brokerage, import/export
Car spare parts.
Our Coat Aprons provide protection from the Front and 16 cm from the shoulder down. Medical Index X-ray Protection Aprons are Made in Germany. Our lead material are certified according to IEC 61331-1 and IEC 61331-3. Product Specification: Standard Lead Pb value: 0.50 mm Pb Size: MEDIUM Length 110 cm Width 60 cm KV Range: 50-150 Velcro or Snap-lock closure +45 colors available
DENSO Robotics ist ein Markthrer bei kleinen Industrieroboter. 4-, 5- und 6-Achs-Roboter, kollaborative, pharmazeutische und kleine Portalroboter. Weiterlesen
Car parts.
Mercedes parts.
Bus Spare Parts, Bus Parts.
Car parts for bmw, audi, volkswagen.
Spare parts for p+h cranes, american hoist cranes, komatsu, caterpillar.
