Usage and applications Knitted wire mesh is used as mist eliminator; insulation blanket mesh and also as filters & air bags for automotive industries. In the refinery or oil and gas production process removal of mist or moisture from the gas becomes a critical process. Generally gas tends to absorb the moisture so effective removal of moisture plays a vital role in the refinery application. The knitted wire mesh is a set of wire looped and interlaced by knitting on a circular knitting machine and then corrugated to form a zig zag pattern. Several of these layers of knitted wire mesh are installed together and further reinforced or welded with grids in specific patterns according to the customer requirements. The mist eliminator installed inside the typical application having high surface area and due to the zig zag pattern obstructs the flow of gas resulting in creating an obstruction to the moisture content. Due to countinous obstruction to the moisture the moisture will form into a tiny droplet and due to gravity will fall down to the liquid. Several types of mist eliminators are used in different applications based on the end use and quality wire offer Wide range of mist eliminators both in metallic and non metallic types suitable for different applications. Our process engineers developed software for evaluating the performance of the mist eliminator based on industry standards and our products are well accepted . Mist eliminator plays vital role in effective performance of the end use application and besides offering only the demister pads our engineers offer solution to the customer with relation to enhanced removal efficiency thus resulting in best performance of our pads.
With very narrow openings and with gratings which can withstand heavy payload Quality wire is specialized in supplying the same with extreme precision and best quality. Narrow opening gratings are very difficult to make as with close weldings there is extreme stress on the material there by the gratings tend to bend. With special controls and specialized after production process we achieve a obsolute flat panel even with such narrow openings. Stainless Steel and other high end alloys require precise control during process and we have specialized welding machines which produces the gratings with absolutely zero defects. Special cleaning process is used in making the grating panels there by we achieve the best surface finish on the gratings after welding. Our custom made gratings are very popular in the filtration process and used as Catalyst bed in the refinery and other oil & gas industries. Besides offering the gratings our engineers are capable of designing specific model gratings which can withstand high load and also design gratings for high pressure drop applications. Quality Our Gratings are made with precise mesh opening and with specific controls in our welding process we ensure the best quality welding. Each lots are identified with batch and lot numbers and These panels are checked for chemical composition of the raw material ; mesh opening and dimension tolerances and welding and shearing strength before it is delivered to our customer. This helps us to deliver the Grating panels exactly as per customer requirements. Coating Gratings in steel are hot dip galvanized or powder coated according to the requirements of the customers. Stainless steel and other copper nickel gratings are pickled and passivated according to the customer requirements. Inventory/Shipment With wide range of Grating products manufactured and supplied in various patterns and specifications we maintain minimum stock level on some of our fast moving products which allow us to pack and ship the goods immediately upon order confirmation. This immediate shipment concept works very well in many of the critical applications where by our customers are immensely benefit as this helps in reducing our customers down time.
Crude Oil, Gas, Deseil En590, Jet Fuel And Petroleum By Products.
For Sale from our Genuine Seller LNG , Buyer must provide Company CIS , POF or BCL from his bank
Bitumen 60/70 shall be 50 % and Kerosine 50% Packed in Flexi Tank
Test Parameters Method Unit Result Color Water white Density 76.5 Flash
Bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn’t mix with water and as it is sticky in nature, it doesn’t easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used. Emulsifier can be defined as a surface-active agent. Emulsifier keeps the bitumen in its fine droplet state by disallowing it to mix with other droplets. As the droplets are very fine they suspend in water. Therefore, bitumen emulsion is a dispersed liquid consisting of three products, i.e. water, bitumen and emulsion. Bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn’t mix with water and as it is sticky in nature, it doesn’t easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used. Emulsifier can be defined as a surface-active agent. Emulsifier keeps the bitumen in its fine droplet state by disallowing it to mix with other droplets. As the droplets are very fine they suspend in water. Uses Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use and can be applied in a wider range of conditions. Advantages a) Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. b) Lower costs are incurred due to a considerable saving on fuel for heating purposes. c) Operating at lower temperatures for cold mixing gives a greater margin of safety, even though these emulsions may contain fluxing oil. d) Not only may cold mix be stockpiled for long periods, but it may also be packaged in small containers and stored. This facilitates the treatment of very small areas quickly, cleanly and economically. Disadvantages A regular water supply is required and this can be a great problem in very hot countries, where water can be in very short supply. Price of Product (USD) : 432 Product Origin : Merco W.L.L Bahrain Key Specifications / Special Features : Type Viscosity @25°C Penetration & Solubility Residue Tack Coat K1- 40 25 Max 60- 200 & (97.5) 38% Rapid Setting RS-1K 20-50 60- 200 & (97.5) 50% Rapid Setting K1-60 -NA & (97.5) 57% Rapid Setting CRS-160- 200 & (97.5) 60% Rapid Setting CRS-2-60- 200 & (97.5) 65% Rapid Setting K1-70NA & (97.5) 67% Medium Setting K2-NA & (97.5)57% Medium Settng CMS 2-60- 200 & (97.5) 65% Slow Setting K3 20- 100 60- 200 & (97.5) 56% Slow Setting CSS-1 20- 100 60- 200 & (97.5) 57% Minimum Order size and packgaing detail 16.00(=/-3%) Metric tons per 20 Foot Container. 200 kgs(+/-3kgs) in one drum.Total no of drums in 1 container 80
Bitumen penetration grade 60/70 means the penetration value is in the range 60 to 70 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction.Penetration Grade Bitumen supplied by MERCO Bahrain. Its penetration grade ( the measure of bitumen hardness) is between 60 to 70. Bitumen is specified by the penetration and softening point test.Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius. Price of Product (USD) : 503 Product Origin : Merco W.L.L Bahrain Key Specifications / Special Features : Test Name Test Method Unit Result Specific Gravity @25°C ASTM D70 kg/cm³ 1.01-1.06 Penetration @25°C ASTM D5 mm/10 60/70 Softening Point °C ASTM D36 °C 49/56 Ductility @25°C ASTM D113 cm 100 min Loss on Heating (wt%) ASTM D6 wt% 0.2 max Drop in Penetration after heating % ASTM D5-D6 % 20 max Flash Point °C ASTM D92 °C 232 min Solubility in Trichlorethylene ASTM D2042 wt% 99 min Spot Test A.A.S.H.O.T102 Negative Minimum Order size and packgaing detail we will provide both 20FT as well as 40FT Containers (200 Liter per drum both open as well as closed top Drums), also in 1 MT flexi bags. Steel Drum Sizes Drum Size 200 kg Drum Height 980mm Diameter 520 550mm Thickness 0.6 –0.8mm
Cutback Bitumen ( Liquid Bitumen ) is Bitumen that is dissolved in a solvent . Typical solvents include Naptha, gasoline and kerosene, white spirit etc. The type of solvent controls the curing time while the amount determines the viscosity of the Cutback Bitumen. The advantage Cutbacks have over Emulsions is a much higher residual Bitumen percent, typically over 80% compares with over 40-65% for Bitumen emulsions. The result is more Bitumen left on the roadway after curing, for the same volume of binder applied. Application Cutback bitumen’s suitable for primer sealing can also be used in the manufacture ofpre-mix asphalt, which is used in patch repairs.Cutback bitumen’s are used extensively in sprayed sealingapplications, particularly in cooler weather where theyprovide improved initial stone retention due to their Price of Product (USD) : 503 Product Origin : Merco W.L.L Bahrain Key Specifications / Special Features : Cutback Classification Cutbacks are divided into two classifications, Rapid-Curing (RC) and Medium-Curing (MC) depending on the solvent used. They are further defined by a number which indicates the minimum kinematic viscosity (fluidity) of the cutback. Grades & Properties Grade Curing Speed Viscosity Penetration of Residue MC 30 Medium 30-60 120- 150 MC 70 Medium 70-140 120- 150 MC 250 Medium 250- 500 120- 150 MC 800 Medium 800- 1600 120- 150 MC 3000 Medium 3000- 6000 120- 150 RC 70 Rapid 70-140 80- 120 RC 250 Rapid 250-500 80- 120 RC 800 Rapid 800- 1600 80- 120 RC 3000 Rapid 3000- 6000 80- 120 Minimum Order size and packgaing detail Palletizing is required for Cutback Bitumen & Emulsions -200kg drums shall be secured as 4 drums per pallet.
Petroleum products and LNG.Brokerage of petroleum products and LNG between buyers and sellers
Frozen bonito, frozen tuna, frozen muroaji, frozen milkfish, vanilla pods, cloves, cinnamon, tamarind, green mung beans, palm cooking oil.
Minerals and metallurgical products & byproducts / waste, carbon, sponge iron.Clearing & documentation, various INCO terms available on request
Diesel oil.
Cashew kernels.
White Spirit, Paraffin Oil, Turpentine Oil.
Bitumen , fuel oil, furnace oil, and white spirit.
Recycle base oil.
Supplier of low Aromatic Industrial Grade Mineral White Spirit: Leading seller of Industrial Grade Low Aromatic White Spirit can supply in Drums and flexi bags 21 metric ton/drum 18 metric ton/flexi bag Product: White Spirit Visual Appearance: Clear &Bright Colour: Water White Flast Point: 39.5º C Distillation Range: 151.4º C. - 241.4º C. Freezing Point: -56.6º C Existend Gum(Air): 1mg/100ml Copper Strip(2hrt5min@ 100º Ct1º C): 1a class Water Detection: Free CONDUCTIVITY: Electrical Conductivity: 283ps/m Conductivity Temperature: 27.0º C
Jet a1 fuel, Jet a1 and en590.
Bitumen, asphalt.
