A winter garden represents a special architectural element with glass walls and roof and is decorated with various decorative plants Year over year there are more country mansions and cottages with special attention to winter gardens. They can give certain flair to the indoor scene and become a lively garden-like place for cozy pastiming and enjoying the beauty of the nature. Winter gardens of different price can be erected as an individual building or a part of a house, housing different plants of different sizes. It is quite problematic and not worth to build a garden on one’s own, so you can easily use our company’s services and order one. Main reasons why Karvan-Glass: 1. high material quality guarantee; 2. excellent design; 3. short order delivery time.
Glass doors are the integral part of architecture today. This is a fantastic choice for any kind of premises, from business centers through to apartments. One may think glass is not a strong material, but it is a misconception. Tempered glass manufacturers have long been offering the product that easily provides a good heat and noise insulation and boasts an outstanding strength and long life. Broad product range The broadest selection of glass doors, fittings and door cases enables to pick a door for any indoor scene. Quality High quality glass from world’s top manufacturers. Simplicity Leaf made of environmentally friendly and easily maintainable material. Safety Safety in use – tempered glass is very strong and does not form sharp splinters if broken. Long life Always the same appearance throughout the life.
Quick details: Place of origin: baku, azerbaijan Item: seat Material: pe Applilcation: university, stadium, arena, school, etc. Color: optional colors or specify by clients Installation: simple mounting Packaging & delivery: Depends on your order. Description: Polymer products plant produces high-quality seat stadium, as well as for all other outdoor and indoor sports and concert facilities. Plastic seat has an ergonomic and attractive design, easy to install and maintain. Plastic seats for the stadium are mounted on any surface by fixing in 4 points. Products provided with clear and detailed instructions for assembly and use, in addition, the company's specialists are always ready to carry out installation and supervision of installation work on the installation of plastic seats anywhere in the country, and if necessary, in countries near and far abroad.
Petroleum refining is characterized by the largest amount of systems exposed to corrosion compared to any other sector of the oil industry. Corrosion problems occur everywhere, from the points of raw materials delivery up to removal and transportation of the refined products. Corrosion control measures shall be taken at crude oil distillation plants and units for alkali treatment of oil, gas plants, reformer and cracking units, straight run deisobutanizers, units for adsorption of hydrogen sulphide from aqueous solutions, furfural treatment units etc. Liquid composition may vary depending on a particular stage of the oil refining cycle – from sulphurous, acid oil-water mixtures fed to refineries to final products (e.g., gasoline) with negligible water content. It is hardly possible to use any “universal” corrosion inhibitor due to the variety of process mechanisms that may cause intense corrosion of equipment used in the oil sector. The need to ensure property package determining processability and compatibility of the inhibitor with corrosion medium components necessitates development of an inhibitor that would be functional in different corrosive conditions. Oilfield water containing large amounts of chloride ions, oxygen, carbon dioxide and hydrogen causes and promotes further development of local electrochemical processes, which represent the most dangerous type of corrosion and failure of metal. Oilfield practice shows that the most dangerous local corrosion damages also occur in the presence of microorganisms. In order to protect oil equipment against chemical and bacterial corrosion, Karvan-L company designed efficient and cost-effective water-soluble and oil-soluble corrosion inhibitors. Corrosion inhibitors are nitrogen-containing surfactants, produced based on natural acids with addition of film-forming admixtures and biocides.
It often happens that people confuse glass panes and vinyl windows. These are not synonyms, however. A glass pane is a part and nearly crucial part of a window structure. This is a translucent structure consisting of two or more glasses that are fixed (glued) together along the outline using spacing bars and sealant compounds. Main functions of a glass pane: natural lighting, thermal and noise insulation. Glass panes are categorized by manufacturing process: standard, where molecular sieve is poured into a metal or vinyl spacer, after which the glued glass sheets are plastered along the edge with silicon, isomelt, polysulfide or polyurethane sealant compound, thus providing the secondary sealing. Warm edge technology-based manufacture This is a new and promising technology. It differs from the standard technology in that instead of several production steps as in the case with glass pane it involves only two (flexible spacer application, pressing), thus greatly saving time and cost. Such glass pane is warmer than that manufactured using a standard technology. As defined in GOST 24866, glass pane are categorized as follows: by number of chambers. A space between each two glass sheets is called a chamber. Glass panes can be single-chamber (two glass sheets), double-chamber (three glass sheets) and so on. by width The glass pane width is the full width considering its glass and air part. Glass panes can be 14, 16, 18, 20, 22, 24, 28, 32, 36, 40, 42, 44 etc. mm By glass type: regular energy-efficient glass with low-emission coating (hard or soft, also known as - or I-type) noise-resistant triplex sun-screening tinted or film-coated glass shutterproof glass with a high protection class.
Glass partitions represent a very good designer solution. They visually extend the room space and improve movement of light. Fully transparent all-glass partitions and doors can be used in office, production and trading premises as well as for facade shopwindow glazing. Furthermore, translucent structures can represent different models: various degrees of mattness and tint, decorated with fretwork and logos. Stained-glass windows are most popular of them. Glass partitions are fabricated of up to 20 mm thick shutterproof tempered glass, which improves the light flux up to 85%. Glass Partitions Provide The Following Advantages The all-glass partitions represent an advantage in that they do not visually cumber the rooms or obstruct the light flux. The all-glass office partitions and doors are secured to walls and ceiling with special fasteners; this is an advantage compared to frame-type translucent partitions as their installation takes less time and is easier, plus there is no need to use non-transparent fastening elements. A glass partition today is not only a cost effective and convenient but also a lovely item. Such partition will fit just nice into the interior. Office glass partitions installed in premises allow deploying a big number of employees due to the better noise suppression. This helps improve the psychological environment and ensure it benefits the productive teamwork. The thick shutterproof glass keeps warmth inside and creates a cozy atmosphere to each employee’s request. The glass partitions and doors are durable, heat-resistant, require no maintenance and are virtually safe.
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: 78*78-325*380 O.D: 50-100 mm Model Number: HDPE Thickness: Depends on your requirement Color: White Material: PE Standard: OHSAS 18 001 Types: Clamps,Elbows 45°,Elbows 90°,Couplings, Reducing couplings,T-Joints 45°,T-Joints 90°,Cross T 45°. Packaging & delivery: Depends on your order. Description: Installation of pipes to the interval sewer network uses from PPH “Homogen polypropylene” fitings .High physical-mechanical properties make these fittings resistant to corrosive environment. These properties can be applied both to internal as well as external surfaces of sewage Fittings. As distinct from PVC Fittings, they have high impact resistance. Our offers fittings made of PPH for waste piping, which can be applied in construction of buildings, including residential houses, cottages, offices, hospitals, laboratories, industrial establishments, as well as farming industry. Taking into consideration biological neutrality of material, fittings can also, be used in food manufacturing industry. Sewage fittings and their socket details are made of high quality white or gray colored granulated propylene. Process of production is carried out in accordance with the requirements of ISO 9001:2000. Technical parameters: Polypropylene sewage fittings are 15 – 20 times lighter than similar cast iron fittings. They are resistant to impact of detergent agents and also, there is no need to paint the fittings. Availability of socket helps to connect them easily. Warranty period is over 50 years • Resistance to hot water flows at +95°C temperature(in some cases even up up to +100°C) • Resistance to chemicals, agricultural and industrial waste water containing various types of corrosive materials and substances • Resistance to hydraulic friction • Leak connections by sealing rubber rings • Ease of pipes and fittings facilitates transportation and installation work. • As opposed to metal and PVC pipes, PPR pipes during water flow absorbs sound and vibration • Condensate does not occur due to the low thermal conductivity on the outer surface of pipe
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Thickness: 1.8-4.9 mm Item: Sewage polypropylene pipes PPH Rating: IP65 Certification: ISO9001 Color: White Standard: OHSAS 18001 Specification: As your requirement OD: 50-200 mm Length: 250-3000 mm Packaging & delivery: Depends on your order. Description: Pipes made of PPH “homogeneous polypropylene” are used for the construction of internal sewer network. High physical-mechanical properties make these Pipes resistant to corrosive environment. These properties can be applied both to internal as well as external surfaces of sewage Pipes. As distinct from PVC Pipes, they have high impact resistance.Our offers Pipes made of PPH for waste piping, which can be applied in construction of buildings, including residential houses, cottages, offices, hospitals, laboratories, industrial establishments, as well as farming industry.Taking into consideration biological neutrality of material, Pipes can also, be used in food manufacturing industry. Sewage Pipes and their socket details are made of high quality white or gray colored granulated propylene. Process of production is carried out in accordance with the requirements of ISO 9001:2000. Technical characteristics Polypropylene sewage Pipes are 15 – 20 times lighter than similar cast iron Pipes. They are resistant to impact of detergent agents and also, there is no need to paint the Pipes. Availability of socket helps to connect them easily. Warranty period is over 50 years. • Resistance to hot water flows at +95°C temperature(in some cases even up up to +100°C) • Resistance to chemicals, agricultural and industrial waste water containing various types of corrosive materials and substances • Resistance to hydraulic friction • Leak connections by sealing rubber rings • Ease of pipes and fittings facilitates transportation and installation work. • As opposed to metal and PVC pipes, PPR pipes during water flow absorbs sound and vibration • Condensate does not occur due to the low thermal conductivity on the outer surface of pipe
To this day, petroleum acids are still being studied by a number of researchers. Interest in the above class of organic compounds is not only attributed to practical perspective, but also to general humanitarian purposes. According to S. Nametkin, "... composition and structure of petroleum acids are closely related not only to the genesis of oil, but to the origin of life on Earth as well". Depending on their origin, oils may contain different amounts of naphthenic acids, extremely insignificant in all cases. Naphthenic acids are extracted from oils using alkali alcoholic solutions. Structure of naphthenic acids in any oil is the same and depends on the nature of oil. Among the oil produced worldwide, and particularly in the CIS region, Azerbaijan's oil features the highest content of petroleum acids. Oils of Bibi-Heybat, Romani, Binagadi, Balakhani, Sabunchi and other fields are rich in petroleum acids, which content in some crude oil grades reaches 1.5 – 2%. Due to the fact that acids extracted from naphthene-base crude of Baku oil fields have the same composition and physical-chemical properties as synthetic naphthenic acids, they are often referred to as natural naphthenic acids.
It is not a secret that the appearance of a house is a sort of a business card for its owner. Embarking on a quest for an architectural solution for the façade of our house or office, we intend to benefit from the uniformity of style, beauty, practicability, and safety A sun breaker or shed is one of key elements of a building decoration which protects the porch or balcony as well as people who like spending time there from the snow, rain and other elements. Insignificant at first glance, but quite important in reality – the element like shed should be not only exquisite and stylish but also strong and safe. And the glass sun breaker from Karvan-Glass is something that satisfies all these requirements. For glass today is a state-of-the-art, stylish and strong material widely used in construction and design. If you want to decorate the building exterior in an unusual style then glass sun breakers are your choice – buy them from our company and satisfy your boldest architectural needs, benefiting from all advantages the state-of-the-art construction technology can provide.
o this day, petroleum acids are still being studied by a number of researchers. Interest in the above class of organic compounds is not only attributed to practical perspective, but also to general humanitarian purposes. According to S. Nametkin, "... composition and structure of petroleum acids are closely related not only to the genesis of oil, but to the origin of life on Earth as well". Depending on their origin, oils may contain different amounts of naphthenic acids, extremely insignificant in all cases. Naphthenic acids are extracted from oils using alkali alcoholic solutions. Structure of naphthenic acids in any oil is the same and depends on the nature of oil. Among the oil produced worldwide, and particularly in the CIS region, Azerbaijan's oil features the highest content of petroleum acids. Oils of Bibi-Heybat, Romani, Binagadi, Balakhani, Sabunchi and other fields are rich in petroleum acids, which content in some crude oil grades reaches 1.5 – 2%. Due to the fact that acids extracted from naphthene-base crude of Baku oil fields have the same composition and physical-chemical properties as synthetic naphthenic acids, they are often referred to as natural naphthenic acids.
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black Material: PE Standard: OHSAS 18 001 Types: Elbows 30-45-60-90 dgr.,T-Joints 90 dgr.,Cross T,Y Pieces 45-60 dgr. Packaging & delivery: Depends on your order. Description: PE 100 brand welded polyethylene fittings are adaptor fittings for PE100 high-density polyethylene pipes. These fittings are manufactured by connecting pipe sections by welding. Released PE 100 brand welded polyethylene fittings have the following configurations and types: 15°, 30°, 45°, 60° and 90°. These fittings are designed for pipe connections at the areas, where pipeline directions (turns and branches) and diameter change. PE 100 brand welded polyethylene fittings are connected to pipes by exactly lining-up and welding ends with the help of a special welding set. PE 100 brand welded polyethylene fittings have increased chemical resistance, temperature changes and deformations. These fittings are not subjected to oxidation, and do not decompose for a long time. Operating life of these PE 100 brand welded polyethylene fittings is 50 years which ensures long-term, continuous use of your pipes.
Quick details: Place of origin: baku, azerbaijan Item: chairs and tables Material: pe Color: optional colors or specify by clients Packaging & delivery: Depends on your order. Description: Tables and chairs folding, for adults and children are made of durable polypropylene. Lightweight, strong, compact, color, no sharp angles, and this is the main requirement of our youngest citizens. You they are simply necessary and indispensable for a picnic, fishing, to give, for any kind of tourism (even for this kind of tourism like kayaks! tested!), and generally any departure of the nature. Very easy to use. Add these chairs you can in any luggage compartment of your car without taking up a lot of space, due to the fact that the chairs are added. And if you do not have a car, you carry a chair too comfortable, because the chair has a comfortable handle. • The table (45 cm) can withstand a load of 140 kg. • Chair (45 cm) "high-grown" withstand a load of 90 kg. • Chair "small-child" (26.5 cm) can withstand a load of 60 kg. Large range of colors. Moreover, the chairs are made of moisture-resistant polypropylene.
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Thickness: 1.25-7.5mm Item: Single-Layer Corrugated Pipes Protection Rating: IP65 Structure: Bellows inside and outside Certification: ISO9001 Color: Outer wall: red (electricity), blue (telecommunication), black (others). Inner wall: white, yellow Standard: OHSAS 18001 Specification: AD7.0MM-AD106.0MM OD: 7.0-106.0mm Length: As your requirement Type: Flexible and Durable Packaging & delivery: Depends on your order. Description: Our polymeric product factory produces new type of single-layer corrugated polyethylene pipes with hard surface and light weight. These pipes ensure safety of power and telecommunication lines. Single layer corrugated pipes outside have a profile in forms of corrugations. Their inside is tubular hollow channels. The corrugated surface to withstand heavy loads. Single layer corrugated pipes varies with their wall thickness and diametres. The more is the thickness, more durable the pipes are. Higher thickness ones used for installation of pipes under the pouring of concrete, cement screed, or under the ground. Single layer corrugated pipes light series are used in all other cases or during outer installations. Our single layer corrugated pipes are made from HDPE material. Advantages and properties: - They do not rot and corrosion; - Resistant to chemicals; - Resistant to external loads and shock resistance; - Waterproof and resistant to moisture; - Non-conductive, so they eliminate the risk of electric shock if cable damaged; - They provide protection against mechanical damage; - Long life of at least 50 years; - They retain their characteristics and properties during the entire lifetime; - They have a wide operating temperature range; - They can be laid open and a closed manner; - These types of cables are flexible and do not need additional coupling fittings; - These types of cables equipped with broaching, which simplifies and accelerates the installation of wires and cables; - For the installation they do not require special skills and special equipment; - They are lightweight, easy to carry, for loading/unloading, handling and storage; have a low cost; - They have environmentally friendly and safe material. Material HDPE Application Areas: 1.Protection of high and low-voltage conductors from mechanical impacts 2.Protects environment from aggressive impacts when cabling under ground 3.Concealed mounting inside of concrete and installation 4.Sewage, ground and storm water disposal Working temperature: From -40ºC till+90ºC Color: Outer wall: red (electricity), blue (telecommunication), black (others). Inner wall: white, yellow Pipe wall color can be changed with the consent of consumer.
It has been decades that architectural glass sheets have been utilized as a construction material. Over this time, manufacturers have achieved a significant success in terms of fabrication and finishing technology, bringing the glass properties almost to perfection. Increasingly pronounced in glass industry is the nanotechnology sector, which renders it specific and extraordinary properties in terms of operation and aesthetics, thus opening new bright perspectives for architects and designers. It would be fair to say that it was new safe multilayer glass items that helped discover most significant improvements of properties and capabilities of glass as a construction material. All valuable operation and technical properties of such glass are achieved by using a “sandwich” principle, i.e. by creating a multilayer composite structure with a polymer layer in between. It is still difficult to appreciate the whole significance and implications of this development. Regrettably, many issues of perfecting the technology and equipment that helps create multilayer glass (triplex production equipment) have been outside researchers’ focus of attention, thus hindering the practical development across the entire range of safety glass application. Most new properties are still unknown and require serious theoretical and experimental developments to uncover. Among these: detailed study of formation and development of multilayer glass production technology based on innovative polymer materials with a higher strength compared to existing materials, research of properties and application of hybrid structures based on new composite elements. The combination of fragile glass and plastic materials (for instance: polycarbonate and glass sandwich panels, glass and acryl tile etc.) enables to optimize the functionality of multi-layer shutterproof glass. It is beyond doubt that ongoing researches in this area will boost the improvement of existing and development of new approaches to designing and creating multilayer glass machines for industrial-scale production.
uniforms, masks, shoes, helmets, kneepads, earmuffs, gloves, aprons, caps, traffic safety equipment, harness and lanyard, eyeglasses.
Gloves.
Hi we are Aluminium Billets and Profile producer and supplier.We are ready supply these productsto 20000 MT monthly based on your demand.Please contact us additional discussion.Thanks. S k y p e : hava.nagila2
Wet blue leather Feature: Stretch Material: Sheep Skin, leather Type: Grain Pattern: Wet Blue Use: Belt, Furniture, Handbag, Luggage, Sofa, Shoes, Lining, Curtain, Home Textile, activewear, Bags,Purses & Totes, Coat and Jacket, Costumes, craft, Home Decor Thickness: Variable Size: all sizes Place of Origin: Azerbaijan, Baku Brand Name: YES Model Number: leather Product name: Wet blue leather Features: 100% natural Usage: multi use Quality: high quality
Blanched hazelnuts Caliber: 9-11, 11-13, 13-15, 15+ Packing: jute or polypropylene bags, vacuum packaging Uses: as a snack, in cooking to add flavor and taste to various dishes, pastries, in cooking sweets, in chocolate bars, in candies. Product origin - Zaqatala, Azerbaijan Minimum Order Size : min 1 ton