Glass material plexiglass display box.
Furniture urban setting and shopping centres, hospitals and parking benches, bins, planters, display stands, directories, bicycle stands, accessories, chairs, tables, bollards, shelters, barriers.
PERT 3Hi Stand is design in order to roll two (2) billets in the same time. The best Italian technology and quality.
Quick drying Greenlabel paint formulated to work in an industrial environment. Permanent on all surfaces, including metals, plastics, glass, rubber, ceramics and much more. The colors stand out very opaque even when writing on dark surfaces. Marker pen with non-toxic paint, containing alcohol that dries quickly without xylene (30). It is suitable for industrial use, provided with double tip.
Quick drying Greenlabel paint formulated to work in an industrial environment. Permanent on all surfaces, including metals, plastics, glass, rubber, ceramics and much more. The colors stand out very opaque even when writing on dark surfaces. Marker pen with non-toxic paint, containing alcohol that dries quickly without xylene (30). It is suitable for industrial use, provided with double tip
Coffee, coffee beans, coffee capsules and pods, coffee ground, branded and in white label. Capsules compatible with the following system: lavazza espresso point, nespresso machines, lavazza a modo mio, lavazza blue, lavazza black, lavazza firma, bialetti, gimoka domo, dolce gusto, caffitaly. All available in branded or private label..
Multimedia kiosk.
Interactive white boards.
Table, chairs, console, mirror, cupboard, armchair, tv-stand.
Double bench without back totally made in stainless steel sanitized structure. The seat is made by plated layers oak 25 mm. painted with polish waterproof coat. Also available in very resistant fireproof, dirt-resistant fake-leather seat. The dimensions allows use in both sides.
This is recycling variant of AVANT bin has an inside concrete weight for stability and an internal reinforcing structure useful against vandalic act. All parts of the bin are coated with “cataforesi” rust proof treatment and follow powder-coat thermosetting paint. Extraction is allowed with a side-frontal door and right extracting rubbish bin system. The bin is closed on top by a stainless steel weatherproof lid. given 3 elliptic put throw rubbish bin hole. There are inside 3 independently sections for the 3 different recycling rubbish in easy extracting rubbish bin system.
During the last years the most used rolling stands type for long products production have been the housingless stands and, even not less much, the cantilever stands. The more frequent requests of our customer, involved in lower investments for complete rolling mills or for revamping of existing plants, are: To reduce the investments for civil works, buildings and cranes. To reduce the equipment delivery times. To reduce the investment cost of mill train. To reduce spare parts. Equipment without on board plant Easy maintenance equipment High performance equipment In other words the rolling mill is primarily interested in lower costs and as well as higher yields! In order to grant these requests and the suggestions of the production and maintenance mangers, PERT has been the first supplier now to develop a new generation of stands called BS Type rolling stands, the Intermediate block and 2XTechnology Finishing Block (the only block in the market that can work with 2 strand).
The demand to offer different productive solutions to its own customers, has allowed Torninova to apply its own technicall ability and experience in the production of air bubble film, in the production of machinery with in-line processing equipped with cast extruders (mono). The plant Power Bubble put together all the modern technologies and stand out for the following characteristics: Extruders with a.c. motor mounted in axis and controlled by inverter with nitrided steel barrier screws realized to plasticize and homogenize the material to extrude in different diameters according the request production capacity. Flat die with double delivery or separated flat dies for a good control and adjustments of the produced films, realized in steel with adjustable deliveries. Infrared Barrel Heating power saving up to 20%, long heater element life and quicker cooling response times Forming unit climbed on guide and rack arms that allow the automatized movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials deliver for the flat dies and for its fast interchangeability. Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant. The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature Produced air bubble film width from 1.000mm to 2.500mm (or more on request) The plant can be equipped (also in a second time thanks to its modularity) with various accessories: Forming cylinders with bubbles in different sizes Perforating unit equipped with brushless motor. Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder Gravimetric blending and metering for up to 4 ingredients for a more accurate and automated management of the granules to be extruded Ink-jet printing unit to personalize the material with logos and symbols
The coex bubble plant, represents the state-of-the art machine among the torninovaÆs production range . It has got all the most sophisticated technologies for air bubble film production, in order to ensure the easy production to the customer, thanks to the full automation of the co-extrusion process, to reach a film with air-barrier effect, that keeps the air inside the bubble for a longer time. The main advantages of such air bubble film are: Better cushioning protection compared with a thicker mono-extruded bubble film: the co-extruded bubble film offers higher air retention (thanks to the internal layer of PA6) and then ensures effective long-term cushioning performances from packing to final delivery. It means also extra strength of each bubble and then extra protection of the goods. Better protection with thinner plastic film: it means better performance with less raw material consumption. Reusable : his long lasting cushioning performances allows to use the same air bubble film for many times. Recyclable : the co-extruded bubble film could be recycled with other polyethylene material An air bubble film of 35 g/,2, produced by co-extrusion process, can be compared, in terms of resistance, with a mono-extrusion air bubble film of 55 g/m2. They have same resistance. Considering such relationship, it means that you save the 30% of the cost for raw materials, by using co-extrusion production process. Mainly, it is composed by three extruders: one for PE layer, one for the PA6 layer and the third one for the TIE layer between PE and PA6. These three extruders, through the last generation of feed-blocks with adjustable geometry allow the production of the special co-extruded air bubble films with ABCBA structure. You can easily understand the co-extrusion process through the following layout: The COEX BUBBLE plant has got the following features: Extruders with a.c. motors mounted in axis and with universal screws in wear-resistant steel, with modular profiles with barrier double thread, in different diameters according to the level of production requested. Every extruder is equipped with a filter and a gear pump with transmission by cardan joint and motor with inverter and feedback loop control. The gear pump, through PID control, adjust automatically the speed of the extruder according to the capacity requested by the production formula and to the desired extrusion pressure. Two separated flat dies for an excellent control and adjustments of the produced films, realized in steel with adjustable deliveries. The feed-block with adjustable geometry, allows the distribution uniformity of the internal layer of polyamide (PA6) on the whole width of the film, also with thickness less than 0.5 micron. Gravimetric blending and metering for the ingredients, for a more accurate and automated management of the granules to be extruded. Forming unit climbed on guide and rack arms that allow the automated movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials delivery from the flat dies and for its fast interchangeability. Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant . The production control occurs by formula that the operator can personalize according to the co-extrusion percentage he needs and to the speed of production. The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature. Width of the produced film: from 1.000 mm up to 2.500 mm (or more on request) The plant can be equipped (also after installation, thanks to its modularity) with several accessories: Moulder cylinder with bubble in different diameters Perforation unit with brushless motor Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder Fast Loading system on the rewinder, that allows, in automatic way, to unload the produced roll with closing system by glue and the loading of the new carton core with application of ôhot-meltö glue. The machines are fully customizable. Contact us to project the most suitable plant for your production and market necessity.
Decorative glass, , murano's glass, glass art items, historic murano glass design items, modern art items, customized furniture for bars, restaurants, hotels and private individuals, , videos, graphics, events and exhibitions, communication and advertising.
Torsional Vibration Dampers (TVD) CORA TVD's stand high loads as our premium quality rubber compounds maximize their damping properties. Decoupled Dampers or DDS (Double Damping System Dampers) Decouplers are made up of a TVD assembled with a torsional coupling, so-called â??isolatorâ??. DDS special design helps to eliminate crankshaft vibrations at low the frequency through the crankshaft isolator rubber while the TVD reduces the torsional vibrations at high frequency inside the crankshaft. Viscous Dampers In VISCOUS dampers, the viscous oil layer placed between the inertia ring and pulley body runs the energy dissipation and converts it into heat. This technology can dampen a wide range of crankshaft natural frequencies from different orders. We hold two patents on innovative construction solutions for viscous dampers.
Cutomized rolls, trays, tailored drawer units, window displays, cases and interiors furnishings.Packaging & manufacturer
Visit cards, flyers, brochures, letterhead .Transportation and shipping
Advertising lights.
We present our flagship product, CARBO-AR charcoal, a magnificent quality product of Argentine origin. This versatile vegetal charcoal stands out for its performance both in heating environments and for use on grills or ovens, offering a superior and safer experience, as its use does not generate sparks