Features: Built in DDS signal generator, support 12 kinds of function signal. Capture output signal function, which can store up to 1000 capture signals. Targeted high intelligent decoding algorithm, the encoderlifeis infinite, and intelligent anti-burn function, 1X Can withstand up to 400V withstand voltage. With 100MHz * 2 ana-log bandwidth and @ 1GSa/s sampling rateï¼?1X = 5MHz, 10X = 100MHz). Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast. High measurement voltage range: 1X can measure 0~40 V, 10X can measure 0~400V. Up to 12 parameters measurementï¼?VPPï¼?VPï¼?Vmaxï¼?Vminï¼?Vavgï¼?Vrmsï¼?Frequentï¼?Duty+ï¼?Duty-ï¼?Time+ï¼?Time-ï¼?Period. Cursor measurement function: it is convenient to manually measure the period and frequency and voltage. Complete triggering function (single, normal, automatic), and at any time, the waveform display (pause function) is frozen. Equipped with high efficiency One-button AUTO, and one-button waveform storage and screenshot function. Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. Equipped with a USB interface, which can be connected to a com-puter to share its screenshots with the com-puter, which is convenient for secondary analysis. Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals. FFT display function, can analyze the spectral characteristics of the signal, memory compression technology, waveform refresh screen does not flicker. With the screen brightness adjustment function and background gr-id brightness adjustment function, also easy to carry.
Handheld oscilloscope, bandwidth 180MHz, Sampling rate 500MSa/s, refresh rate of up to 50000wfm/s. The DDS signal generator has 14 kinds of function signal waveforms and a free-customized chopping waveform.The frequency of the sine wave can reach up to 20MHz, and the other waveforms can reach up to 10MHz. It has three time base modes of YT, XY and rolling. Manual cursor measurement is suitable for measurements with large noise signals.
Measurement Modes: 40M the most could measure. Single, Multiple, Area, Volume measurement; Pythagorean, Second Pythagorean, Front and rear reference, Unit switching. Mobile App Intelligent Linkage, show the detection results on app interface.
12 Core functions to meet your needs: Trip record Fault code detection query Real-time detection of car conditions Whole vehicle depth scan Malfunction light delete Performance Testing Trip analysis Head up to display value Read data stream Throttle carbon deposit detection Precise Fuel Consumption monitoring Battery voltage Bluetooth V5.1 Protocolplug to use, Automatic connection 24 languages can be switched freely compatible with IOS, ANDROID
The FNIRSI GC-01 nuclear radiation detector uses a higher-precision Geiger-Miller counter. Counter for detecting the intensity of ionizing radiation (beta particles, gamma rays and x-rays). Use a gas tube or a small chamber as a probe.When the voltage applied to the probe reaches a certain range.Each time the ray is ionized in the tube to produce a pair of ions, it can be amplified to produce an electric pulse of the same size.And recorded by the connected electronic device.The number of rays per unit time thus measured.The alarm threshold measurement rate can be arbitrarily selected.
FNIRSI HS-01 Smart Electric Soldering Iron DC 96W 65W PD Power Constant Temperature & Fast Heating (1s Heating up, 6s Melting tin) Temperature Range: 80-420â?? CNC Metal integral Molding Smart safety anti-scald Power supply: USB Type-C port 0.87 inch OLED screen
EXTENSIVE"COMBAT" SCENARIOS: AC/DC voltage 1000V, on-off Buzzer, Capacitance 10mF, Resistance 100M, Frequency 10MHz, NCV voltage test, Diode, Zero/Fire Wire Check, Temperature 1000, Auto identify, Samrt anti-burn, Auto off, Data hold, Flashlight, Ture valid value.
FNIRSI DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding and other functions are skillfully integrated. It is equipped with a 2.4-inch color TFT display, built-in rechargeable lithium battery, brings users stronger and more practical functions with good portability. FNIRSI DSO-TC3 is an upgraded version of DSO-TC2. On the basis of DSO-TC2, it has upgraded capacitance ESR detection, function signal generator output, oscilloscope bandwidth and sampling rate improvement, input voltage and diode detection range increase and so on. The improvement in performance and function of DSO-TC3 makes the device more stable and accurate in the detection process.
DPOX180H is a cost-effective handheld dual-channel digital phosphor oscilloscope launched by FNIRSI with a two-in-one oscilloscope and signal generator. The oscilloscope has a real-time sampling rate of 500MSPS and an analog bandwidth of 180MHz. In terms of display, a high-contrast 2.8-inch IPS full-vision LCD screen and digital fluorescent technology are used. The waveform display effect is good, and the color ways are grayscale and color temperature. With a waveform refresh rate of up to 50000wfm/s, it is easier to display abnormal signals with low probability. The time base system includes a ZOOM time base for easy analysis of digital protocol signals. With a vertical sensitivity as low as 5mV, it can better measure small signals of 5mVPP. Ultra-high signal-to-noise ratio, fully sealed shielding measures, stable circuit feedback design, clean and clear waveform. The original adjustable automatic bandwidth limit and adaptive adjustable trigger suppression are suitable for analyzing and measuring signals with relatively large noise. 20M hardware bandwidth limit, can filter out noise above 20MHz. The trigger adopts digital trigger technology with high precision. It has three trigger modes: automatic/single/normal. It has a strong ability to capture periodic signals, burst signals and protocol signals. The DDS signal generator has 14 kinds of function signal waveforms and a free-customized chopping waveform. The frequency of the sine wave can reach up to 20MHz, and the other waveforms can reach up to 10MHz. The original chopping output function can store up to 500 customized signals. It has three time base modes of YT, XY and rolling. Manual cursor measurement is suitable for measurements with large noise signals. Efficient one-button automatic adjustment, adaptive 25%, 50%, 75% electric level trigger, it only takes 2 seconds to measure 1VPP/1KHz. Save waveforms and screenshots with one key, up to 250 sets of waveform data or 90 pictures can be stored, and 500 intercepted wave data can be stored at the same time. The data browser can browse and view the currently saved waveform data and pictures, and the waveform data supports operations such as zooming and moving. High voltage anti-burning protection, all gears can withstand high voltage up to 400V. USB data export, you can connect to a computer to copy picture files, and you can also copy system files to the oscilloscope for system upgrades. 5V2A fast charging, and 1 hour can charge to 80%.
Features: Intelligent anti-burn,1X can withstand up to 400V withstand voltage. 100MHz analog bandwidth @ 1GSa/s sampling rate (1X=5MHz,10X=100MHz). Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast. Capacitive touching screen, the same as the touching mode of modern mobile tablet, is not a resistive touching screen with ancient nail operation. High measurement voltage range, 1X can measure 0~40V, 10X can measure 0~400V,100X can measure 0~4000V. Up to 12 parameters measurement: VPP,VP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty+,Duty-,Time+,Time-,Period. Cursor measurement function, it is convenient to manually measure the period and frequency and voltage. Complete triggering function (single, normal, automatic). At any time, the waveform display (pause function) is frozen. Equipped with high efficiency One-button AUTO. One-button waveform storage and screenshot. Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc. Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis. Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals. FFT display function, can analyze the spectral characteristics of the signal. Built in 6000mAh rechargeable lithium battery,fully charged for 4 hours of continuous use at the highest screen brightness. Memory compression technology, waveform refresh screen does not flicker. Screen brightness adjustment. Background grid brightness adjustment. Ultra thin, easy to carry. Specifications: Material: ABS Color: black+white Analog band width: 100MHz * 2 Number of channels: 2 channels Maximum real time sampling rate: 1GSa/s Vertical sensitivity: 50mV/div~500V/div Horizontal time base range: 50S/div~10nS/div Maximum test voltage: 40V (1X probe), 400V (10X probe) Storage depth: 240Kbit Input resistance: 1M ADC precision: 8bits Coupling mode: AC/DC Trigger mode: Single, Normal, Auto Trigger edge: Rising edge / Falling edge External trigger voltage: 0~40V Display: 7 inch - 800*480 Operating: capacitive touching screen + gesture Extension ports: USB picture export Power supply: 1 * lithium battery, 6000mAh (included) Item size: 184 * 124 * 50mm / 7.2 * 4.9 * 2.0in Package size: 200 * 134 * 60mm / 7.9 * 5.3 * 2.4in Package weight: 986g / 2.2lb
Oscilloscopes, spectrum analyzers, signal generator, transistor detector for electronics repairing & testing groups, wall detector, formaldehyde detector, nuclear radiation detector, infrared rangefinder.Export, transport like dhl, fedex, door to door express service .
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI. The real-time sampling rate is 500M, and the analog bandwidth is 110MHz. In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily grasp the waveform like a desktop computer. We have added 1k Hz self-test square wave for FNIRSI-1C15, and the storage depth has been upgraded to 12kpts. With reference to the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. Afterglow and scroll modes make it easier to detect and record waveforms. Built-in 3000mAH rechargeable battery, it can work continuously for more than 10 hours after fully charged. The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop. The joystick replaces the original arrow keys, making the operation simpler and more effective. Model : FNIRSI-1C15 Number of channels : 1 Screen size : 2.4 inches Screen Resolution : 320*240 Analog bandwidth : 110M Sampling Rate : 500M 1k Hz self-checking square wave Stand by Rise Time :
Dental Dental Implant Closed-tray impression coping is a dental appliance that is used to create an impression of a dental implant in the jawbone. This impression is then used to create a customized restoration for the implant. The main benefit of using closed tray impression coping is to accurately capture the implant abutment position, shape, and size, and transfer this information to the dental laboratory for fabrication of the implant restorationDental closed-tray impression coping is made from high-quality materials grade 5 titanium.This creates a precise impression of the implant position and shape, which ensures a more accurate and reliable restoration. This type of impression coping also eliminates the risk of the coping shifting or moving during the impression stage, which can cause inaccurate results and require additional appointments to obtain a satisfactory impression. The use of closed tray impression coping is simple and easy. The coping is screwed directly onto the implant and a tray is then placed over the top. The tray is filled with impression material and placed over the coping. The material is allowed to set, and then the tray and coping are removed from the mouth. The impression is then sent to the dental laboratory for fabrication of the restoration. The dental closed-tray impression coping plays a significant role in ensuring optimal implant restoration outcomes. Its benefits include the ability to capture an accurate and precise impression of the implant position and shape, reduced chances of impression movement or shifting, and simpler and more efficient impression-taking procedures. Its ease of use and reliability make it an essential tool for dental professionals who specialize in implantology.
