Sharjah Leather Chemicals Suppliers and Manufacturers

Sodium chlorate is an inorganic compound with the chemical formula NaClO3. It is a white crystalline powder that is readily soluble in water. It is hygroscopic. It decomposes above 300 C to release oxygen and leaves sodium chloride. Several hundred million tons are produced annually, mainly for applications in bleaching pulp to produce high brightness paper. The main commercial use for sodium chlorate is for making chlorine dioxide (ClO2). The largest application of ClO2, which accounts for about 95% of the use of chlorate, is in bleaching of pulp. All other, less important chlorates are derived from sodium chlorate, usually by salt metathesis with the corresponding chloride. All perchlorate compounds are produced industrially by the oxidation of solutions of sodium chlorate by electrolysis.

To know the price and see more samples of products, visit our website White Spirit (solvent� 402� ) is a mixture of aliphatic and alicyclic C7 to C12 hydrocarbons with a distillation range of 142 - 200 C and boiling point 105 to 205 C. White spirit is a petroleum-derived clear liquid used as a common organic solvent in painting and decorating. This solvent is clear liquids, and water-colored and have a mild odor, are chemically stable and not corrosive. solvent 402 is used as an extraction solvent, as a cleaning solvent, as a degreasing solvent and as a solvent in aerosols, paints, wood preservatives, lacquers, varnishes, and asphalt products. -solvent 402 in paint industry is the most widely used as diluent and drainer. -solvent 402 in home is commonly used to clean paint brushes after use, to clean auto parts and tools, as a starter fluid for charcoal grills, to remove adhesive residue from non-porous surfaces, and many other common tasks. Types and grades of solvent 402: Three different types and three different grades of solvent 402 exist. The type refers to whether the solvent has been subjected to hydrodesulfurization (removal of sulfur) alone (type 1), solvent extraction (type 2) or hydrogenation (type 3). Each type comprises three different grades: low flash grade, regular grade, and high flash grade. The grade is determined by the crude oil used as the starting material and the conditions of distillation. In addition there is type 0, which is defined as distillation fraction with no further treatment, consisting predominantly of saturated C9 to C12 hydrocarbons with a boiling range of 140 200 C.

Corn oil is made by pressing or extracting seedlings of Zea mays L. (Gramineae) and then refined. Corn oil is a transparent, pale yellow to golden yellow oil with a subtle scent and taste. It is used in the food business to make certain foods (margarine, mayonnaise, dietetics, baby food), as well as in cosmetics to make soaps and hair care products. Corn oil is also used in the technical industry as a basic material for lubricants and leather care products.

Rapeseed and Canola Oil The rapeseed plant is known for its golden-yellow flowers, which bloom in the summer. Its oil, which goes by the names of rapeseed and canola, is widely used in cooking, baking, and food processing. It's crucial to understand the difference between industrial and culinary rapeseed oil. Canola is another name for the culinary variant. The automotive and chemical sectors use industrial rapeseed oil, whereas the culinary form is used in cooking. The genetic makeup and quantity of erucic acid, which is damaging to your health in big amounts, distinguishes the two varieties. In truth, canola oil must contain less than 2% erucic acid and meet globally regulated requirements in order to be labelled as such. Otherwise, it will be labeled as rapeseed oil. However, most varieties in grocery stores are canola oil. Rapeseed oil contains less saturated fat than other regularly used cooking oils, and it is popular in the Indian subcontinent as a traditional cooking oil. It is typically used as frying oil due to its distinct odour. Vitamin E is also abundant in rapeseed oil. Rapeseed oil has regenerative capabilities, making it a great moisturiser and anti-aging agent. Because of its high quantities of alpha-linolenic acid (omega-3), which is too scarce in today's diets, rapeseed oil has fascinating dietary qualities. It's become a staple on dining tables.

New-type hot-connectivity composite fiber is made from different types of modified high molecular materials through advanced composite spining technology. It has unique characteristic of melting at low temperature, and after hot treatment, it can naturally adhere without use of binder, green and environmental. The product abides by strict sanitation control standards to achieve sanitation material grade. The products include ES fiber and ETS modified polyester composite staple fiber which is initiated by the company, and can be applied to production of surface layer and guide layer of disposable sanitary articles Functional characteristic the product is a kind of chemical blend provided with advantages of the two materials. ES fiber has low melting point on the superficial layer, soft, bouffant and pervious, while the core layer has certain intensity and fiber state. ETS fiber is provided with advantages of heat bonding, high hygroscopicity and antistatic property, etc. Application scope the sanitary products are applicable to hot air penetrating technology to produce surface layer and guide layer of disposable sanitary materials such as paper diaper and sanitary towel; the conventional low-melting fiber is applicable to production of hard cotton, decorative wall board, environmental mattress, seat mat, environmental filter media, constructional acoustic damping and heat insulation materials, etc. Specification 4D*51MMã??4D*32MM

One of the most well-known and sought-after byproducts of the refining process of vegetable (mostly sunflower) oil are fatty acids. Fatty acids, an industrial product with a GMP+ certification, are mostly used in the animal formula and feed sector. This is because adding fatty acids or fatty acid-based compounds to an animal feed ration can reduce feed costs. Fatty acids are crushed and processed through a whole cycle. In addition, they are utilized in the manufacturing of soap, glycerin, and stearin, as well as in the food processing industry as a direct formula component. Tocopherols.

1. What is PFAD PFAD stands for Palm Fatty Acid Distillate. It is a processing residue resulting from physical refining of crude palm oil products. At room temperature it is a light brow semi-solid, melting to a brown liquid on heating. Up to 80 percent of PFAD is free fatty acid (FFA), with palmitic acid and oleic acid being the major components. The remaining 20 percent is made up of components including triglycerides, partial glycerides, and vitamin E, sterols and squalene's. 2.How is PFAD used? PFAD is used as a renewable raw material in biofuels production as well as to produce candles, soaps, other oleochemical products, and animal feed. Specific to biofuel production in Europe, the EU allows Member States to account PFAD consumption towards greenhouse gas emissions reductions under its Renewable Energy Directive. The amount of emissions reductions depends on the PFAD technical classification, a residue or co-product, which is up to the individual Member State. To verify the emissions reductions, the EU relies on voluntary certification schemes, such as the International Sustainability and Carbon Certification system. 3.What are the benefits6 of using PFAD Producing renewable fuels using PFAD is good for the climate. It is an efficient way to use waste generated through the palm oil refining process, preventing PFAD from going to literal waste. A by-product that is undesirable from the food industry perspective can be very desirable for other sectors. Neste MY Renewable Diesel7 which is refined from PFAD and other waste and residue materials, such as Used Cooking Oil (UCO), helps to replace crude oil-based diesel in transportation. Using Neste MY Renewable Diesel can reduce greenhouse gas emissions by 90 percent on average compared to a diesel-powered vehicle using conventional fossil fuel-based diesel.

To know the price and see more samples of products, visit our website Light hydrocarbons can be used as a basic material in the chemical and petrochemical industries as feed in the production of various petrochemical products, including solvents and diluents. Among the various uses of hydrocarbons In the production of lubricants, solvents, industrial chemicals, explosives, raw materials of all kinds of paints and thinners, types of plastics, rubbers, synthetic fibers and industrial alcohol, production of liquefied gas and kerosene (for heating and domestic use), production of polishes and Varnishes and... are used. And also one of the most widely used hydrocarbon uses, lighter and more valuable hydrocarbons can be converted into high octane gasoline and other petroleum fuels (jet fuel) using catalytic processes.

Rasha Motor oil 5W 40 API SN full synthetic engine oil is the ultimate in protection and performance. This premium quality engine oil is formulated a complex blend of synthetic base oils and chemical additives designed to protect the engine and enhance its performance under extreme operating conditions such as high temperature motorway driving or low temperature stop and go driving. Rasha Motor oil� 5W 40 API SN full synthetic engine oil is the ultimate in protection and performance. This premium quality engine oil is formulated a complex blend of� synthetic� base oils and chemical additives designed to protect the engine and enhance its performance under extreme operating conditions such as high temperature motorway driving or low temperature stop and go driving. �  This oil is designed for use in high-speed four-stroke cycle diesel engines and Tier 4 non-road exhaust emission standards as well as for previous model year diesel engines.SAE 5 W 40 API SN RASHA Motor Oil Full synthetic engine oil, low friction type that reduces fuel consumption. Recommended for 4-stroke engines, petrol or diesel, which is used in in extreme cold and in warmer climates. This motor oil is especially effective at sustaining emission control system durability where particulate filters and other advanced after treatment systems are used. RASHA Motor oil Heavy-Duty SAE 5W-40 Full Synthetic API SN provide enhanced protection against oil oxidation, viscosity loss due to shear, and oil aeration as well as protection against catalyst poisoning, particulate filter blocking, engine wear, piston deposits, degradation of low- and high-temperature properties, and soot-related viscosity increase.

Product Description Texol Coolant 50% is an Ethylene Glycol based engine radiator coolant made using coolant concentrate at 50% the rest being DM water. The coolant concentrate is formulated with special chemical additives to provide a high degree of protection against corrosion for the metal and alloy components in the cooling system with specific reference to aluminum. It is harmless to rubber and does not foam or clog radiators. Applications It is recommended for all light commercial vehicles with liquid cooling systems. The product act as an antifreeze under low temperatures and protects from boiling under high temperatures conditions. The product is diluted with demineralized water to a concentration of 50%. It is suitable for light vehicles and even in larger diesel engines. Features and Benefits Long term protection of metals and alloys in the cooling system against corrosion. Protection against frost. Effective engine cooling. High boiling point gives better cooling performance in high temperature condition. Protective against excessive evaporation. Compatible with rubbers. Excellent anti foam properties Health and Safety Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.

Product Description Texol ATF Dex VI is a new generation, Premium class, fully synthetic, multi-vehicle ATF suitable for current and all previous types of vehicles needing Dexron type Transmission fluids. The product is made using fully synthetic base oils and carefully selected friction modifiers, anti-wear additives, viscosity index improvers and oxidation inhibitors. Synthetic base oil provides high viscosity index and high operating range besides providing very low pour point. Applications Texol ATF Dex VI is a multi-vehicle ATF recommended for almost all the latest automatic transmissions needing Dexron VI and Mercon LV fluids. It is suitable for Voith, BMW and ZF transmission oils such as 5 speed, 6 speed, 7 speed, 8 speed and 9 speed gear boxes (Lifeguard), besides applications requiring JASO 1A oil. Texol ATF Dex VI is recommended for use in Allison C3, C4 applications, Chrysler ATF +3 and +4; ATF 134, T-IV, Type WS, Mopar 8&9, SP-IV, LT 71141, 3309, 3403, etc. Features and Benefits Good viscosity/temperature characteristics. High thermal stability. Very good low temperature properties. High stability to aging and high chemical resistance. Resistance to wear and good friction characteristics. Excellent corrosion protection. Quality, Specifications and Approvals GM DEX VI JASO 1A Texol's proprietary specifications. Health and Safety Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.

To know the price and see more samples of products, visit our website BASE OIL SN 100-150-300-500-600-700 Base oil is a type of oil which is used as a base for lubricants. The main element of lubricants (volume wise) is base oil and it forms about 95% of lubricants weight. In some lubricants (Compressor and hydraulic oil) 99% of the oil is consisted of base oil and only the 1% which is left contains additives. Base oils can be reached from oil based and non-oil based resources. Most of the base oils used in the world are obtained from crude oil refining. Most of the compounds which form base oils are Paraphinic, Naphthenic and aromatic compounds. Base oils chemical properties and their impact on the usage of final lubricant: 1 volatility: reduction of the oil, oil thickening, sediments 2 surface activity: foaming, pressure tolerance, air release, emulsion expansion 3 oxidations: sediments, oil thickening, metal oxidation, mud forming 4 Viscosity: Fluidity in lower degrees, energy waste, abrasion protection, proper cooling 5 being soluble: Motor neatness, sealant compatibility, process applications, formulation sustainability The base oil which is extracted from crude oil is called mineral base oil which is categorized in two types (Paraphinic and Naphtshic). Paraphinic oils are consisted of normal hydrocarbons and Iso hydrocarbons. Naphthic oils are consisted of annular full hydrocarbons. Paraphinic oils have certain attributes in comparison with naphthic oils such as; More shedding temperature Less special weight More viscosity indicators Less solubility property Higher resistance against oxidation Higher flash point Mainly naphthic oils are needed for less temperature criteria and pour point specially; hydraulic oils, coolers, rubber producing oils, metalworking and cylinders lubricants for big motors and greases.