Appearance: Extruded black slab rubber sheets Applications: 1. Tire manufacturing and Tire retreading. 2. Car mats. 3. Extruded articles. 4. Rubber Roll and flooring. 5. Tyres 6. Hoses. 7. Shoe sole sheets 8. Conveyer belts and many rubber products. Storage: Store in a cool & dry place below 60�°C away from sources of heat or ignition. Packing: Put on wooden or PVC pallets and covered by plastic film stretched or in PVC bags 25kg. Health & Safety: Detailed advice on the Health & Safety aspects of this product is givin in the individual product Safety data sheet (SDS), available upon request.
Thickness: - (2.8mm, 3mm, 3.5mm, 4mm, etc.) according to the model of car mat. Colors: - Black. - Grey. - Beige Application: Used as flooring inside a car and keep the original car floor from anything Physical Properties: - Hardness (A): 10 �± 60 - Elongation (%): 300 - Tensile: 3.5 MPa Packing: In plastic bags. Material : Natural Rubber & Synthetic Rubber. Keep the original car floor from damage. - Easy to clean, dismantle and install. - The car gives a stylish, atractive and wonderful view. - Five pieces of different shapes, sizes, models and colors. - Made in Egypt with high quality.
Size: - (2-1) mm. - (4-1) mm This rubber is certified by FIFA. - Water resistant, UV resistant and Heat tolerance is 70. - Lightweight and durable. - This rubber is recommended for use in Roofing or Road Flooring. - sport Flooring, - Automotive industry, construction and Geotechnical/Asphalt Applications Material: automotive and truck scrap tire Relative density @ 15 : 02. 0 �± 1.14 gm/cm�³ Color: Black
Description: Rubber Rolls Dimensions: Width: 1000 mm Length: up to 10000 mm Thickness: 3 mm Material: Natural Rubber and SBR
Dimensions: 450*350 mm - Thickness: 20mm And many different sizes according to customer requirements Purpose: Anti-Vibration Pads are a simple yet effective solution to absorb vibration, and impact and reduce noise from various types of machinery. Using an Anti-Vibration Pad correctly can often be the most cost-effective way to address a high-frequency vibration Material: Mix from SBR and Natural Rubber Physical Specification: - Hardness: 65 + 5 - Tensile: 3.5 N/mm2 - Elongation: 300% Applications: Appropriate for machinery requiring anti-vibration performance and stability performance Color: Black
Dimensions: 15 mm *50*50 cm W:4.5 : 4.75 Kg/Tile 10 mm *120*120 cm W: 16:18 Kg/Tile Advantage of this Tile: - Excellent slip resistance, water resistance, - Resistance to heavy impact loads, sound absorbent. Indoor flooring: Does not react to weather conditions. - It has no negative effect on children if directly touched according to our customer feedbacks. - Endurance is more than 2 tons per square meter. Way of installment: - Most cases don't require adhesives as it is heavy tied to Each other in a puzzle way which makes it hard to move away. - If it is needed any rubber adhesive or polyurethane is used on a plain surface Applications: It is used in kidsâ?? areas and schools. Material: SBR Rubber mixed with PU Binder. Color : - Black - Grey - Green - Blue - Red Life span: 5:10 years - according to the use
Dimensions: - Width*Length: 36cm * 107cm - Height: 5 cm Purpose: - Rubber bridge expansion joints are mainly made of rubber, steel plate and angle iron. Steel plates are set in the rubber bridge expansion to strengthen the bearing capacity and they can slide freely along the angle iron to meet the expansion deformation of main grid. - Because of the excellent sealability and shock-absorbing effect of rubber, rubber bridge expansion joints do well in proofing water and reducing noise. The elasticity of rubber plates and its shear deformation in the telescopic channel helps the whole device to realize telescopic motion. Features : - Rubber bridge expansion joints are made of prime-quality rubber, have anti-aging and have a long service life. - Wear resistance, corrosion resistance. - Rubber bridge expansion joints can withstand the weight of vehicles and pedestrians. - During installation, bolt holes on the bottom and each junction are filled with adhesion agent which makes the whole rubber bridge expansion joints be highly water-resistant. - Rubber bridge expansion joints can ensure vehicles runs smoothly and no noise. Material: Rubber & Steel Plates. Applications: - Rubber bridge expansion joint is used in expressway. - Rubber Bridge expansion installed in the end of bridge. - Rubber bridge expansion joint is used flyover. - Rubber bridge expansion joint is used in connection of bridge
- Manufactured from durable EPDM rubber. - High UV & Ozone resistant - Fast & easy installation. - Maintenance Free - Provides a permanent seal for any type of construction - Allows exerting a continuous and uniform force against the joint walls. Applications: - Bridges - Parapets - Cark parks - Buildings - Tunnels - Water treatment plants.
Dimensions: Width: Up to 1500mm - Length: up to 20,000mm according to thicknesses - Thickness: 3mm - 25mm according to use and applications. Description: Anti-Abrasion Rubber Lining Sheet is a blended natural and synthetic rubber sheet offering tear and impact resistance & high elasticity. It has excellent resistance to large particle impact and abrasion. Material : Natural Rubber and Synthetic Rubber Physical Specification : - Hardness (Shore A): 5 + 50 - Tensile (MPa): 3.5 min. - Elongation at break: %300 - Abrasion max: 150mm3 - Temperature Range: 20-c to 70+c. Color: Standard Black Optional (Beige, Grey). Applications: 1. Shot blasting rooms. 2. Parking areas. 3. Wall lining for workshops and factories.
Dimensions: Width: Up to 1500mm Length: Up to 50 m. Thickness: 1.5 - 50 mm. General Description: EPDM rubber (ethylene propylene diene monomer rubber) is an elastomer that is characterized by wide range of applications and good chemical resistance. Features: Chloramine resistant Good heat and compression resistance. Resistant to ketones, hot and cold water, steam, alkalis, polar solvents,ozone, sunlight, alcohols, glycol engine coolant and Skydrol (phosphate ester hydraulic fluid). Resistant for air conditions. Applications: Automotive: Weather stripping and seals. Wire and cable harnesses. Window spacers. Hydraulic brake systems. Door, window and trunk seals Roofing: Roof membrane. Roof coating. RV roof. Industrial: Water system O-rings and hoses. Tubing, grommets, and belts. Electrical insulations and stinger covers.
Description: ESD Rubber Mats consist of a top layer static dissipative rubber laminated to a bottom layer of conductive rubber. The synthetic rubber work surface offers excellent resistance to oil, grease, and most common solvents. They are heat and solder resistant, will not delaminate, and are easy to clean. Applications: Computer Operators, Electronic Assembly, and Manufacturing, Pharmaceutical Plants, Cleanroom Operation, Fiber Optics, Aerospace, and Hospitals. To be used in work surface applications. Construction : Static dissipative synthetic rubber laminated to a bottom layer of conductive rubber. Chemical Resistance : They are resistant to degradation by inorganic acids, organic acids, reducing agents, detergent solutions, alcohols, aliphatic hydrocarbons, mineral oil, amines, and aldehydes.
Size: - Length*width: 100*200cm. - Thickness: 10mm. Others dimensions according to the customer requirements. Weight: 15.5 â?? 17 kg. Features: - Have anti-slip, water drainage, anti-fatigue and anti-shatter properties. - Easy to clean and install. - Insulates against cold and damp. - The mat holes could be opened or closed according to the customer requirement. - This mat has done excellent work in kitchens, food processing plants, locker/shower rooms and behind bars and running floors. Physical Specifications: - Tensile min. : 5 N/m2. - Elongation at break (%) min.: 333. - Hardness (Shore A): 535+. Material: SBR Rubber Applications: Airports, Anti-Slip Protection, Balcony Floor Surfacing, Buses, Commercial Vehicles, Campsite Walkways, Catered Events, Concert Staging, Construction Sites, Commercial Entrance Mat, Deck Flooring, Dog Friendly Flooring, Fishing Boats. - Garage Floor Mat, Golf Courses, Horse Trailer Mat, Hotels, Indoor/Outdoor, Industrial Shelves, Long Doormat, Medical Buildings, Movie Sets. - Office Building, Outdoor Doormats, Party Rental Companies, Patio Floor Mats, Scraper Mats, Shelf Liners, Shop Matting, Skating Rinks, Spike Proof Applications, Storage Rooms, Toolbox Liners, Trailer Floor Covering, Van Rubber Flooring, Vibration control, Warehouses, Wet Areas, Work Areas, Running Floors. Color: Standard: Black. Other colors can be customized. The way of installation: It can be sticked on the ground with or without glue.
Dimensions: - Width*Length: 11cm * 3.2m : 8cm * 3.2m - Thickness: 2cm Description: To prevent low of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich. Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: Width*Length: 15cm * 13m : 2.5cm * 13m - Thickness: 1 cm Description: To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich. Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: - Width*Length: 20cm * 12m - Thickness: 1 cm Description: - To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Size: - 200x160x25mm Features: - Excellent slip resistance, water resistance, - Resistance to heavy impact loads. - Does not react to weather conditions. - It has no negative effect on children if directly touched. - Easy to install over a concrete base area. - Springy and comfortable underfoot. - Its interlocking design can installed without adhesive in mild traffic areas, has good stability and can be expanded indefinitely and covering large areas. Application: - Excellent slip resistance, water resistance, - Resistance to heavy impact loads. - Does not react to weather condiotins. - It has no negative effect on children if directly touched. - Easy to install over a concrete base area. - Springy and comfortable underfoot. - Its interlocking design can installed without adhesive in mild traffic areas, has good stability and can be expanded indefinitely and covering large areas. - Entryways kidsâ?? area, Walks and Driveways. - Horse barn, corridors, wash bays saddling areas, paddock areas, path. - Balcony, courtyard, platform bridge, patio, garage, home use. - Gym, fitness center, sport center, stud-farm. Material: - Top layer from 7mm colored SBR + 20 % EPDM granules - Bottom layer from 18mm black SBR. Color: - Bottom layer Black color. - Top layer Red & Green & Blue and Grey color. Life span: - 5:10 years - according to the use.
Description: These Rubber Bumpers are made from a hardwearing blend of EPDM and available in various sizes. The rubber buffers protect against harsh impacts, they can be bolted directly to the desired surface using the pre-drilled counter sunk holes. Size:610*210*130mm Color: Black - Black and Yellow Material: EPDM Operating temperature Range: -15C to 70C
1-Black Rubber Bumper Dimensions: 50cm*50cm Description: - It helps align parked cars and control speed in driveways, parking lots, and roads. It Prevents vehicles from pulling through parking spots and keep cars a safe distance from each other in parking lots and keeps speeds low in high-traffic areas. - The size of bolt that use to install it, is 25 mm. - Maximum height: 5cm - 7cm. - It has a place to pass power cables under it and place to put a night reflectors. Applications: It is used to make the speed slow in garage, tourist village, places to wait, schools and club Material: EPDM Rubber Color: BLACK Life Span : 5:10 years - according to how to use it 2- Black and Yellow Rubber Dimensions: 40cm*100cm*5cm. Weight: 18 kg Description: It helps align parked cars and control speed in driveways, parking lots, and roads. It Prevents vehicles from pulling through parking spots and keep cars a safe distance from each other in parking lots and keeps speeds low in high-traffic areas. - The size of bolt that use to install it, is 25 mm. - Maximum height: 5cm - 7cm. - It has a place to pass power cables under it and place to put a night reflectors. Application: - It is used to make the speed slow in garage, tourist village, places to wait, schools and club Material: Natural Rubber & SBR Color: BLACK & Yellow Life span: 5:10 years - according to how to use it
Dimensions: 15*120*120 mm W: 31: 33 Kg / Tile 20*120*120 mm W: 34:36 Kg / Tile Advantage of this tile: - Excellent slip resistance, water resistance, - Resistance to heavy impact loads, sound absorbent. Indoor flooring: - Does not react to weather conditions. - It has no negative effect on children if directly touched according to our customer feedbacks. - Endurance is more than 2 tons per square meter. Way of installment: - Most cases donâ??t require adhesives as it is heavy tied to Each other in a puzzle way which makes it hard to move away. - If it is needed any rubber adhesive or polyurethane is used on a plain surface Applications: It is used for indoor gym and sport halls as Shock absorbers and safety flooring. Material: SBR Rubber mixed with PU Binder. Color : - Black - Grey - Green - Blue - Red Life span: 5:10 years - according to the use.
Dimensions: - MC001AVM: Dia: 44* Height: 41 mm - MC002AVM: Dia: 44* Height: 44 mm (with steel base thickness 3mm & Dia. 50mm) Features: Easy-to-install Universal Mounts - Provide fail-safe, all-attitude isolation for vehicle cabs, engines, transmissions and other equipment. - Designed for shock load damping. - It withstands up to 50 kg per piece and must be installed on a circular fitting base. Physical Specification: - Hardness (Shore A): 40 - 80 - Tensile Strength (MPa): 4 min. - Elongation at break (%): 280 min. Color: Standard: Black Applications: - Anti-vibration Rubber. - Noise Absorption Rubber. - Engine, Generator, Motor, Compressor, etc
