Machine Made Carpet .
No. of pieces : 1 Material : Genuine cow leather with ostrich skin print . Inner Material : Genuine cow leather . Accessories : Copper . Color : Havan . Dimensions : Width 35, 24.5 Length 30 Depth 10.6 cm Industry : Hand Made
Packaging materials, vegetables and fruits, ready made garments, dyed fabrics, upholstery and curtains.
Upholestry fabrics Upholestry fabrics made of chenille, taffeta or compound of both We also produce curtains fabrics made of voile, organza , linen Plastic roll 100m/roll
Curtain fabrics Upholestry fabrics made of chenille, taffeta or compound of both We also produce curtains fabrics made of voile, organza , linen Plastic roll 100m/roll
Description: Rubber Rolls Dimensions: Width: 1000 mm Length: up to 10000 mm Thickness: 3 mm Material: Natural Rubber and SBR
Dimensions: Width: Up to 1500mm - Length: up to 20,000mm according to thicknesses - Thickness: 3mm - 25mm according to use and applications. Description: Anti-Abrasion Rubber Lining Sheet is a blended natural and synthetic rubber sheet offering tear and impact resistance & high elasticity. It has excellent resistance to large particle impact and abrasion. Material : Natural Rubber and Synthetic Rubber Physical Specification : - Hardness (Shore A): 5 + 50 - Tensile (MPa): 3.5 min. - Elongation at break: %300 - Abrasion max: 150mm3 - Temperature Range: 20-c to 70+c. Color: Standard Black Optional (Beige, Grey). Applications: 1. Shot blasting rooms. 2. Parking areas. 3. Wall lining for workshops and factories.
Dimensions: Width: Up to 1500mm Length: Up to 50 m. Thickness: 1.5 - 50 mm. General Description: EPDM rubber (ethylene propylene diene monomer rubber) is an elastomer that is characterized by wide range of applications and good chemical resistance. Features: Chloramine resistant Good heat and compression resistance. Resistant to ketones, hot and cold water, steam, alkalis, polar solvents,ozone, sunlight, alcohols, glycol engine coolant and Skydrol (phosphate ester hydraulic fluid). Resistant for air conditions. Applications: Automotive: Weather stripping and seals. Wire and cable harnesses. Window spacers. Hydraulic brake systems. Door, window and trunk seals Roofing: Roof membrane. Roof coating. RV roof. Industrial: Water system O-rings and hoses. Tubing, grommets, and belts. Electrical insulations and stinger covers.
Purpose: Resists oxidation, - UV Rays and Ozone resists many corrosive chemicals - Has an Excellent operating temperature range of (-45) �°C to 120 �°C. - Dust-Proof, Sound-Proof, Wind-Proof. - Reducing the chances of air and water entering the building. They are highly resistant to water, ozone and ageing which makes them an ideal solution for external applications. Application: Used for roofing sheets, - Weather strips window spacers, - Oil seals Electrical insulations and stinger covers. Dimensions: Width: 150mm X1500mm Length: Up to 30 m. Thickness: 1.5 mm Color: Black
Dimensions: - MC001AVM: Dia: 44* Height: 41 mm - MC002AVM: Dia: 44* Height: 44 mm (with steel base thickness 3mm & Dia. 50mm) Features: Easy-to-install Universal Mounts - Provide fail-safe, all-attitude isolation for vehicle cabs, engines, transmissions and other equipment. - Designed for shock load damping. - It withstands up to 50 kg per piece and must be installed on a circular fitting base. Physical Specification: - Hardness (Shore A): 40 - 80 - Tensile Strength (MPa): 4 min. - Elongation at break (%): 280 min. Color: Standard: Black Applications: - Anti-vibration Rubber. - Noise Absorption Rubber. - Engine, Generator, Motor, Compressor, etc
Description: These Rubber Bumpers are made from a hardwearing blend of EPDM and available in various sizes. The rubber buffers protect against harsh impacts, they can be bolted directly to the desired surface using the pre-drilled counter sunk holes. Size:610*210*130mm Color: Black - Black and Yellow Material: EPDM Operating temperature Range: -15C to 70C
Dimensions: - Width*Length: 36cm * 107cm - Height: 5 cm Purpose: - Rubber bridge expansion joints are mainly made of rubber, steel plate and angle iron. Steel plates are set in the rubber bridge expansion to strengthen the bearing capacity and they can slide freely along the angle iron to meet the expansion deformation of main grid. - Because of the excellent sealability and shock-absorbing effect of rubber, rubber bridge expansion joints do well in proofing water and reducing noise. The elasticity of rubber plates and its shear deformation in the telescopic channel helps the whole device to realize telescopic motion. Features : - Rubber bridge expansion joints are made of prime-quality rubber, have anti-aging and have a long service life. - Wear resistance, corrosion resistance. - Rubber bridge expansion joints can withstand the weight of vehicles and pedestrians. - During installation, bolt holes on the bottom and each junction are filled with adhesion agent which makes the whole rubber bridge expansion joints be highly water-resistant. - Rubber bridge expansion joints can ensure vehicles runs smoothly and no noise. Material: Rubber & Steel Plates. Applications: - Rubber bridge expansion joint is used in expressway. - Rubber Bridge expansion installed in the end of bridge. - Rubber bridge expansion joint is used flyover. - Rubber bridge expansion joint is used in connection of bridge
Thickness: - (2.8mm, 3mm, 3.5mm, 4mm, etc.) according to the model of car mat. Colors: - Black. - Grey. - Beige Application: Used as flooring inside a car and keep the original car floor from anything Physical Properties: - Hardness (A): 10 �± 60 - Elongation (%): 300 - Tensile: 3.5 MPa Packing: In plastic bags. Material : Natural Rubber & Synthetic Rubber. Keep the original car floor from damage. - Easy to clean, dismantle and install. - The car gives a stylish, atractive and wonderful view. - Five pieces of different shapes, sizes, models and colors. - Made in Egypt with high quality.
Description: MARSO CLM COL Gard is designed to protect the edges of columns in structures. Materials: MARSO CLM Col Gard is made of a high impact resistance extruded rubber profile. Standard color is black. Yellow reflective cover strips are available on request. Range of sizes: The gard is available with or without galvanized metal insert clips with various dimensions. Standard lengths: The standard lengths of MARSO CLM Col Gard are 1 meter and 1.2 meters. Other sizes can be provided upon request. Installation: Place clip on the wall at a distance of 100 or 150 mm from the finished floor level and mark the holes positions on the wall. * Drill holes in the wall by using suitable drill bits. * Fasten the clip to the wall using M6/M8 screws and plastic plug. * Slide the rubber gard from the sides. Clean the Corner gard using dry cloth to clear dust. Alternatively they can be fixed to the column surface using the BASF epoxy resin Wing Length CLM65: A=65 , B=65 CLM: with clips AD: without clips adhesive type
Aluminum & galvanized steel profiles, , Paver pedestal, , Oofing filter fabric, , Waterproofing membrane protection board, , Plastic sheetin, Fiberglass chopped strands mat (csm), , contractor clean up bags & stretch wrap.
Aluminum & galvanized steel profiles, paver pedestal, roofing filter fabric, waterproofing membrane protection board, plastic sheeting for roofing and dry walls, fiberglass chopped strands mat (csm), contractor clean up bags & stretch wrap.
Aluminum & galvanized steel profiles, Paver pedestal, Roofing filter fabric, Waterproofing membrane protection board, Plastic sheeting for roofing and dry walls, Fiberglass chopped strands mat (csm), Contractor clean up bags & stretch wrap.
E-sign is a series to comply building fire codes an insurance standards. it uses less than 2 watts of power with back up battery for 3 hours.
Step Light: recessed mounted step light . provide beauty durability and performance , with no visible fasteners to provide seamless integration with architectural styles. Ground Recessed Luminaire: range of inground up lights with different shapes.
Flood light luminaire in an elegant design is making the installation flexible and convenient, it does not only provide bright and lasting lighting but also reduce maintenance. material: made of die cast Aluminum treated and painted with electrostatic powder coating Lens: made of safety and tempered glass Suspension: surface mounted
