Maltodextrin is made from corn starch by enzymatic hydrolysis, purification and drying. It is a product between starch and starch sugar.
Calcium Formate Powder 98% Calcium formate, molecular formula: Ca(HCOO)2, molecular weight: 130.12,H.S. CODE: 29151200, CAS NO.:544-17-2,Bulk density: 900-1000kg/m3,Specific gravity: 2.023 (20â??). Free flowing Calcium Formate,at normal temperature, it is a white crystalline powder, bitter and non toxic, with slight moisture absorption. It can be mutually dissolved with water, nonflammable and nonexplosive.
Calcium formate Appearance�Crystal Flowing Powder Calcium Formate % min�98.0 Ca % min�30.0 Moisture % max� 0.5 PH Value�6.5-7.5 Process  1, neutralization Calcium formate and hydrated lime neutralization generate formate, the manuf actured goods calcium formate. 2, double decomposition method Sodium formate calcium nitrate and calcium formate in the double decomposition reaction in the presence of catalyst, the range of sodium nitrate.Calcium formate refined to obtain goods. 3, epoxy fatty acid methyl ester by-product The epoxy fatty acid methyl ester by the rapid development of production, the product will produce a large number of by-product during the production of formic acid, the byproduct of a use project is to produce formic acid calcium formate.
Products introduction: Sodium lignosulphonate ( lignosulfonate ) water reducer are mainly for concrete mixture as water-reducing additive. Low dosage , low air content , water reducing rate is high , adapt to most kind of cement. Can confected as concrete early-age strength enhancer , concrete retarder , antifreeze , pumping aids etc. Nearly no precipitate product in the liquor additive which is made from the sodium lignosulphonate and naphthalin-group high-efficiency water reducer .The sodium lignosulphonate is fit for apply to building project, dam project, thruway project etc. 2.Main performance 1, can reduce 10% of water consumption at least ; 2, can improve mixture of the concrete; 3, compression strength improves by more than 15% equally on 3-28 days; 4, can reduce the initial stage of the cement heat of hydration by a large margin; 5, have no function of corroding on the reinforcing bar. 3.Operation methods : 1. 0.2-0.5% of mixing amount in concrete (with cement weight), users can adjust the mixing amount through the test ; 2. Can use after mixed liquid , also can put with cement , aggregate into mixer to use at the same time too, need lengthen time properly; 3. The result is more obvious after mixing with high-efficient naphthalene department water-reducing agent. User can determine the suitable dosage according to the result that cement variety, aggregate situation, naphthalene department type of water-reducing agent are tested fixing; Packed in plastic film bag wrapped with plastic woven sack with a net weight of 25kg each
Bentonite is a high swelling clay mineral whose name was derived from the location of the first commercial deposits mined at fort benton, wyoming u. S. A. Mineralogically, bentonite mainly consists of montmorillonite in combination with various mineral impurities such as feldspars, calcite, silica, etc. Montmorillonite belongs to the smectite group of clays which also include similar behaving minerals such as beidellite, saponite and hectorite. Geologically bentonites are mainly of volcanic origin, the majority of commercial deposits were formed by the hydrolysis or metamorphism of volcanic rock or ash and are almostly found in everywhere in world. The structure of montmorillonite is fundamentally a three layer structure with an octahedral aluminium hydroxyl sheet sandwiched between two layers of silicon- oxygen tetrahedra. However, the aluminium atoms are partially replaced by the substitution of either magnesium or iron atoms, thereby creating a charge deficiency within the unit structure. This results in a small negative charge on the basal plane of silica tetrahedra which is balanced by absorption of exchangeable cations between adjacent platelets. In natural montmorillonite, these cations are usually calcium, sodium or magnesium according to the formations of bentonite. Specification -welldry activated clay (montmorillonite clay, bentonite clay), 100% pure clay desiccant without any calcium chloride. In p.P. Woven bags of 25 kgs / 50kgs /1000 kgs net Kept in dry and ventilating place, prevent from rain and moisture when storage; if agglomerated, please crush and make it into solution, and its effect will be the same.
FC-43 Perfluorotributylamine CAS No.ú¦311-89-7 Assayú¦í¦82% Appearanceú¦colorless clear liquid Main applicationú¦1. As an anticorrosive driving isolating liquid for apparatus & Instruments. 2. As a dielectric insulating oil. 3. Stable diluent specific solvent or reagent for chemical reaction. 4. Thermoconducting cooling agent used for transformer, Particularly small transformer for tall & big buildings. 5. Oxidation-resistant lubricant. 6. Fluorocarbon emulsion used as blood substitute. 7. Leak detecting liquid of electronic devices.
FC-9 N-ethyl,perfluorooctylsulfonylamide Assayú¦95% Appearance: White or yellowish waxy solid Application: It is a perfluoro anion surfactant the the important intermediate for perfluoro surfactants. In addition, it is an excellent pesticide and goodAt killing some insects such as curing ant, cockroach, and other reptiles.
Chemicals.
Sodium lignosulphonate, calcium lignosulphonate, sodiun gluconate, sodium naphthalene formaldehyde, maltodextrin.
Monosodium glutamate (MSG) is a flavor enhancer commonly added to Chinese food, canned vegetables, soups and processed meats. The Food and Drug Administration (FDA) has classified MSG as a food ingredient that's "generally recognized as safe," but its use remains controversial.
SIO2 %: 25 Na2O %:0.05 PH value:2.0-4.0 Viscosity at 20 degree: 3.5-4.5 SP.GR at 20degree: 1.15-1.17 Particle Size(nm):10-20 Used in battery, short service life of ordinary lead-acid batteries, use silicon sol can be configured to solid electrolyte battery, greatly improving the service life of the battery;At the same time, ordinary sulphuric acid electrolyte, in the car to overflow, but the use of solid state electrolyte battery has very good solve the problem, effectively prevent the leakage and overflow of sulfuric acid to avoid pollution of the environment.
Element name In Atomic weight 114.818 Element type Metal element Physical traits Indium powder,Indium wire,Indium Ingot,Indium particles,Indium bar Product purity 4N,5N Product specifications 150m,75m,45m
Related products: BMK powder CAS 16648-44-5 5-Bromo-5-nitro-1,3-dioxane CAS 30007-47-7 N-(1-Methylethyl)-benzenemethanamine CAS 102-97-6 Saponin CAS 8047-15-2 Phenacetin cas 62-44-2 2,5-Dimethoxybenzaldehyde CAS 93-02-7 2-bromo-4-methylpropiophenone CAS 1451-82-7 4-Amino-3,5-dichloro-alpha-bromoacetophenone CAS 37148-47-3 CAS 50370-56-4 Win-35428 Chloroauric Acid CAS 16903-35-8 BDO CAS 110-63-4 4, 4 - Piperidinediol hydrochloride CAS 40064-34-4 1 - N - bok - 4 - (Phenylamino) piperidine CAS 125541-22-2 N-phenylpiperidin-4-amine cas 23056-29-3 Pyrrolidine CAS 123-75-1 2 - PHENYL - PENTAN - BROMO - 1-1 - ONE CAS 49851-31-2 BTMS 50 CAS 81646-13-1 CBD oil and powder 13956-29-1 1, 1 - Cyclobutanedicarboxylic acid CAS 5445-51-2 3 - Bromopropyne CAS 106-96-7 1 - Tetralone CAS 529-34-0
Product name: Cinnamic Acid Synonyms: trans-Cinnamic acid; trans-3-Phenyl-2-propenoic acid; 3-Phenylpropenoic acid; Cinnamylic acid; 2-Propenoic acid, 3-phenyl-, (2E)-; 3-Phenylacrylic acid; 3-Phenylacrylic acid CAS NO.: 140-10-3 Melting point: 133 °C Boiling point: 300 °C Density: 1.248 Refractive index: 1.5049 Flash point: >230 °F Storage temp.: Store at RT. Solubility: 0.4g/l PH: 3-4 (0.4g/l, H2O, 20) Form: White Crystalline Powder Content: â?¥99% Packaging: 25kg kraft paper bag Storage method: pay attention to the fire source, especially to avoid sunlight, and store it in a cool place. Solubility: Soluble in ethanol, methanol, petroleum ether, chloroform, soluble in benzene, ether, acetone, glacial acetic acid, carbon disulfide and oil, insoluble in cold water. Cinnamic acid is an organic compound with the formula C6H5CH=CHCOOH. It is a white crystalline compound that is slightly soluble in water, and freely soluble in many organic solvents. Classified as an unsaturated carboxylic acid, it occurs naturally in a number of plants. It exists as both a cis and a trans isomer, although the latter is more common. Cinnamic acid is a central intermediate in the biosynthesis of myriad natural products include lignolsto lignin and lignocellulose, flavonoids, isoflavonoids, coumarins, aurones, stilbenes, catechin, and phenylpropanoids. Its biosynthesis is performed by action of the enzyme phenylalanine ammonia-lyase (PAL) on phenylalanine. Cinnamic acid is a precursor for the synthesis of a huge number of plant substances, including lignin, tannins, flavonoids, pigments, many of the flavor components of spices, and various alkaloids, such as morphine and colchicine. Usage: Cinnamic acid is an important substance because it is widely used in perfume, food, photographic, polymer and pharmaceutical industries, as well as for clinical and toxicological studies. Until now, many methods have been reported for its determination, such as titrimetry, differential-pulse polarography, spectrophotometry, mass spectrometry, HPLC, electrokinetic capillary chromatography, capillary electrophoresis, gas chromatography and liquid chromatography. However, there are many disadvantages over these methods, such as long-response time, reagent consumption, complicated operation, etc. 1. Flavors and fragrances 2. The pharmaceutical industry 3. Organic synthesis
Uses of Methyl Cinnamate (Cinnamic acid methyl ester): In the international market, methyl cinnamate is mainly used in the flavor and perfume industries. It is used in the fragrance industry as a deodorant. It is often used to blend oriental floral fragrances such as carnations, cherries, strawberries and grapes. It is used in soaps, detergents, flavors and pastries. Methyl cinnamate and ethyl cinnamate can be added to cigarette cut tobacco for use as a flavoring agent and a flavoring compensator. As an organic synthesis intermediate, it is mainly used in the pharmaceutical industry. Methyl cinnamate (C6H5CHCHCOOCH3) is a white crystal with a melting point of 34 C. It is insoluble in water and soluble in ethanol and ether. Due to its fresh fruit flavor, it is often used in the perfume industry to formulate fruit flavors, oriental flavors and soap flavors. Such as high-grade flavor, has a wide range of uses in food, daily cosmetics, soap, etc.
Color: White Appearance:Powder Transport Package:25kg/Bag Specification: CaSO4 99% Trademark:Yulan Brand Origin:Hubei We are manufacturer of Yulan Brand Calcium Sulphate Food Grade,which is the famous brand and main exporting products of our company,widely exporting to Southeast Asia,Taiwan,HongKong,Europe etc. In order to enter into direct business relations with customers all over the world,we are willing to serve for you any time
English name : Cinnamic acid Other names : trans-3-Phenylacrylic acid; trans-Cinnamic acid; Cinnamic acid; (2E)-3-Phenylacrylic acid; 2-Propenoic acid, 3-phenyl-, (E)-; CAS No. : 140-10-3 Molecular formula : C9H8O2 Molecular weight : 148.1586 Molar mass : 148.16 g/mol Melting point : 131-136ºC Boiling point : 300 °C Flash point : 166ºC Refractive index : 1.555 (20ºC) Properties : White to pale yellow crystalline powder Purity : 99% Packaging : 25kg kraft paper bag Storage method : Store at RT. Usage : 1.Can be used as fragrance mixture in soap, shampoo, washing powder, daily cosmetics. 2.Cinnamic acid can be used to adjust apples and cherries. It can be used as apple flavor, cherry flavor, fruit flavor and flower flavor. 3.Anti-mildew, antisepsis and sterilization using cinnamic acid can be applied to freshness and antisepsis in food, vegetables and fruits. 4.In the pharmaceutical industry, the important drugs used in the treatment of coronary heart disease are lactamidine and Xintongping, and chloramphenicol and cinnamophenazine, which are used to make "Xinan'an", a local anesthetic, bactericide, and hemostatic agent. Medicine, etc. 5.Cinnamic acid also has a good aroma-preserving effect. It is usually used as a raw material for fragrance and is used as a fixative in daily fragrance. 6.In the agricultural industry, cinnamic acid is used as a growth promoter and long-lasting fungicide for fruit and vegetable preservation. 7.In organic chemical synthesis, cinnamic acid can be used as a slow-release agent for galvanized sheet, a heat stabilizer for polyvinyl chloride, a crosslinking agent for polyurethane, a flame retardant for hydantoin and polycaprolactam, and a chemical analysis reagent.
English name: IsoaMyl 4-MethoxycinnaMate Other names: Isoamyl p-methoxycinnamate; Isopentyl p-methoxycinnamate; 3-Methylbutyl (E)-3-(4-methoxyphenyl)prop-2-enoate CAS No.: 71617-10-2 Molecular formula: C15H20O3 Molecular weight: 248.32 Molar mass: 248.32 g/mol Melting point: Boiling point: 362.00 to 363.00 °C at 760.00 mm Hg Flash point: 110.5°C Refractive index: 1.51 Properties: Light yellow viscous liquid Purity: â?¥98.5% Packaging : 25kg/Plastic Blue Barrel pack Storage method: Pay attention to the source of fire, especially to avoid sunlight, store in a cool place sealed. Usage: Isoamyl 4-Methoxycinnamate is used in the highly protective sunscreen composition against the UVA/UVB.
Ethyl cinnamate Usage of Ethyl cinnamate (Ethyl trans-cinnamate): 1. it can be used as food spices allowable for temporary use. it is mainly used for the preparation of strawberry, raspberry and plum, cherry and other type of flavor. owing to the high boiling point and stability, it is appropriate to be used for baked goods. 2. it is an important kind of fragrance and spices intermediates. it can also be used as the intermediates of medicine and food additives. 3. it can be used for the perfume industry. 4. it is suitable to be applied to the roses, daffodils, ambergris-amber, citrus incense, fern, chypre, cologne, re-oriental and woody-incense and other flavor. it can be used to coordinate the other ointment in the soap, toiletries water and powder flavor and also has incense fixative effect. it can also be used as flavoring agent to be applied to flavor such as cherry, grape, strawberry, raspberry, peach, plum, cinnamon, spicy and vanilla bean. 5. it can be used as the incense fixative agent and modification agents for fragrance. it can also be applied to glass prism 6. this product exists in the natural storax with a fruit-like aroma and the atmosphere being clear and sweet with oriental fragrance. it has excellent effect when being used in combination with the natural fruit essential oils with the effect being better for fragrance, perfume and flavor. it can also be used in edible waxberry essence.
Name: Potassium cinnamate Synonyms: Cinnamic acid, potassium salt; potassium transcinnamate; Cinnamic acid potassium salt; 3-Phenylpropenoic acid potassium salt CAS No.: 16089-48-8 Formula: C9H7KO2 EINECS number: 240-244-7 Formula: C9H7KO2 Molecular weight: 186.249 Boiling point: 265°C at 760°C mmHg Flash point: 189.5°C The steam pressure: 0.00471 mmHg at 25°C Properties: white crystalline powder, soluble in water, slightly soluble in alcohol, has a natural cinnamon smell. Uses: new natural food preservatives, widely used in medicine, agriculture and food, and can also be used as a raw material for flavoring