3.7v 200mah li polymer battery pack Integrated with protection circuit module Lead out 3 wires with connector
Rated voltage:¡k¡k¡k310 vac and 350vac, 50~60hz 1.Provides interference suppression, all safety approval 2.Overvoltage stress withstanding 3.Self-healing properties 4.Active and passive flame retardent Non-inductively wound with a metallized polypropylene film dielectric/electrode, encapsulated in flame retardant (ul94, v-0) plastic case and epoxy resin end seal.
40, 000 times per second of vibration. cut edge smoothly. two action control to correspond different workspace. reduce operation of fatigue. power output adjustable. easy use. handle knife well. 39cm*27cm*21cm weight 3.6kg
Spec:gurrent rating:3a Voltang rating:250v ac / dc Temperature range:-25¡æ to + 105¡æ (including temperature rise) Applicable wires:22~28 Type:terminal(contact) Material:brass 10000/pcs real
FC/PC D Adaptor Fully in compliance with telcordia gr-326 type connector specifications. Precision mechanical dimensions. Zirconia ceramic sleeve. Snap/latch mounting mechanism. 2000pcs in one carton, 56cm*26cm*37cm, 10.0kgs
Cable tie 100pcs/ Polybag
Multilayer ferrite chip beads Excellent in physical properties, such as terminal strength, flexure strengh, soldering resistance and solerability.
Multilayer chip inductors Monolithic structure for highly reliable surface mount applications. Excellent solderability and high resistance for either flow or reflow soldering. Superior q characteristics guaranteed over the wide frquency application.
Ni-Zn Soft Ferrite Cores Emi suppression generated from round cable used in digital equipment. Emi/rfi suppression, plus and matching transferor, choke, input filters
Copper rod, magnet wire, communication cable, optical fiber cable, power cables, electronic wires.
Single Side : Maximum shipping Panel Size 470mm*570mm Finished Board Thickness : Minimum Board Thickness : 0.6mm+/-0.1mm , Maximum Board Thickness : 2.0mm+/-10% Dielectric Material : Heat Conductive Glue / FR4 Aluminum Type : 5052 Copper Thickness : 1/2~2oz Trace Width / Spacing : Minimum Line Width / Spacing(Internal&External) 0.1mm ,The tolerance followed by IPC-6012 Surface Finish : Immersion Gold(Ni/Ru) 0.025~0.1um /Lead Free HASL (Min. 2.5um)/OSP (Entek CU106A) 0.2~0.5um Solder Mask : LPI Test : Hi-Pot Test
Layers: FPC 1~4 L Finished Board Thickness with Copper : Min 0.075mm (1L) / Max 0.3mm (2L) Finished Board Thickness Tolerance: �±0.02~0.04mm Impedance Control :+/-10% Base Copper Thickness : Standard : 1/3oz,1/2oz,1oz / Spcial:2oz Base Film Thickness:Standard:0.5mil , 1mil / Special : 2mil Stiffener:PI / FR-4 /SUS Finished Hole Diameter:Min { }0.15mm / Max { }6.30mm Finished Hole Diameter Tolerance PTH�±3mil(�±0.075mm) npth�±2mil(�±0.05mm)
Layers : Sample 1~32 / Mass Production 1~20 Size :Max shipping size is 600mmx550mm , +/-0.15mm Finished Board Thickness: Min 0.4mm(4L)/0.6mm(6L),+/-0.1mm (Max) 3.6mm(2.2~3.6mm depends on material), +/-10% Copper Thickness :1/3~5oz (Depends on material) Impedance Control :+/-10% Via Holes (Min) : Mechanical Drill:0.2mm / Micro Via:0.1mm PTH+/-0.075mm NPTH +/-0.05mm Aspect Ratio : Sample :10:1 / Mass Production :8:1 Min Trace(Width/Spacing) : Internal 0.075mm / External 0.075mm The tolerance followed by IPC-6012 Advance Process : Blind Routing Cavity,Coil Board,Plug Hole With Epoxy,Half Hole Plated Spacing between Pads : Min :8 mil
Model no.:cwst-247 Easy to install Connector is changeable Specification Frequency: 824-960/1710-1990mhz Impedance: 50 ohm Gain: 0-3dbi Vswr: less than 6.0:1 Polarization: toroidal Radiation: vertical Connector: sma r/a Antenna color: black Antenna length: 53.5mm
Place of origin: taiwan Copper thickness: 0.45 mils - 14 mils Board thickness: 280 mils (max finished board) Inner line width:
Place of origin: taiwan Brand name: fr4, rogers, isola, etc. Copper thickness: 0.45 mils - 14 mils Board thickness: 280 mils (max finished board) Min. Hole size:
Place of origin: taiwan other gold, immersion tin & silver, & osp Maximum layer count, prototype: 40 or more layers Max. Board size: 18 x 24 inches Bow and twist: max 0.1% Drilled via size: 2 mils Annular ring: 1.5 mils Inner line width:
Place of origin: taiwan Base material: varied Copper thickness: 0.45 mils - 14 mils Annular ring: 1.5 mils Inner line width:
Place of origin: taiwan Laminate: fr4, rogers, isola, etc. old, immersion tin & silver, & osp Maximum layer count, prototype: 40 or more layers Max. Board size: 18 x 24 inches Bow and twist: max 0.1% Drilled via size: 2 mils Annular ring: 1.5 mils Inner line width:
Electrical characteristics: Parameter ls-6031-1ls-6031-2 Input voltage ac100~ac277v Color4000k/5800k Led chip3020*4413020*441/ 3020*4 Led w31w31w Luminous flux2400lm2400lm/1300lm/24lm Illumination 2m240lm240lm Power consumption33w33w/16w/1w Power factor(pf)115v>0.9/230v>0.9115v>0.9/230v>0.9 Illumination area410mm x 410mm Viewing angle160 Material of casealuminum + abs + ps Operation life20000hr Dimension603mm(w) x 603mm(l) x 40mm(h) Weight2400g Environmental ratings: Parameter mininum maximum Operating temperature -30c +60c Storage temperature -20c +50c.
