Sell nickel wire 0.025 NP2; gost 2179-75; price – 0, 25$/m; purity 99,80% - 99,89%; 20 kg per months or more, 1 kg = 227 272 m; to each party will give to the certificate on manufacturer and iasts giredmet. Nickel wire in bundles
Sell nickel wire 0.025 NP1; Price: USD 0.40 - 0.80 / Meter; GOST 2179-75; Purity: 99,90-99,98%; 10 kg per months or more; 1 kg = 227 270 m; Quality - Official certificate of Iasts Giredmet (Russia) and IGAS (Germany). Origin - Russian Federation. Technical characteristics of nickel and nickel wire: not radiation, fire-proof, explosion-proof, not toxic does not contain precious metals well handled in both hot and cold conditions high corrosion stability has high strength and plasticity. Description: The wire is of excellent quality. It is manufactured on the multiple nonslip wire-drawing bench HEINRICH (Germany). It does not have grease marks, oxidation tints and chalking. The surface is even, clean, without blisters, hollows, flaws, scratches, lamination and dints. Application: Medical equipment, navigation, electronics, television, microwelding, telecommunications, nano-technologies, space industry, Special protection materials (in production of documents that require high-degree protection from fakes passport, visa, etc. including money banknotes). Nowadays nickel wire is used also as a financial tool. The wire is spooled to plastic coils which are packed in transparent plastic containers, containers are sealed with 4 (four) giredmet seals (juc-tacc of giredmet) "gac/68".
U=380v/50hz P=28kva Water cooling Phase regulator Time regulator Leg leading or with higher prices-pneumatics Weight - 56kg Dimensions - 45/50/130cm
Stainless steel scraps.
European tilt & turn solid wood windows and doors. Wooden cases.
We can offer mineral, spring and sparking natural waters with quality as the best in the world - low mineralization, perfect taste, natural waters, Bulgarian origin.
Drilling capacity in: - Concrete / steel / non-ferrous metals / wood: 22 / 13 / 22 / 30 mm - Core cutter (TCT cutter only) in masonry up to: 60 mm No load rpm: 0-1300 min–1 No load impact rate: 6200 min–1 Weight: 2.6 kg Power input: 650 W.
# Callipers Measuring range of 0-1000 mm; # With and without fine tunning; # Material – constructional or stainless steel; # Mat chromed scale; # Reading – 0.1 and 0.05 mm. # Special callipers 3-point vernier calliper; # 5-point vernier calliper; # Marking-off vernier calliper; # Weld seam gauge; # Other types. # Vernier depth gauges Measuring range of 0-500 mm; # Reading 0.1 and 0.05 mm; # Material – constructional or stainless steel; # Mat chromed scale. # Micrometers Measuring range of 0-25; 25-50; 50-75; 75-100 mm; # Reading – 0.01 mm; # Measurement reading surface of hard alloys (carbide). Range 0-25 mm. # Coordinate small size tables One-coordinate; # Two-coordinate; # Three-coordinate; # Stroke along the coordinate: 0-25 mm # Measuring stands Type A2 – with magnetic switch at the base; # Type A4 – with cast-iron base and T-shaped groove; # Type B3 – with square-riffled table; # Micrometer holder. # Smooth gauges Plug gauges – one sided; # Plug gauges – two sided; # Snap gauges. # Thread gauges Thread plug calipers – one sides; # Thread plug calipers – two sides; # Thread ring gauges. # Smooth rings Reference rings; # Setting rings Range: 6-150 mm. # Squares and rulers Flat squares; # Squares with base; # Checking rulers; # Templates. # Angle gauges Protractor with lock screw Range 80x120 – 300x500 mm; # Protractor with sliding rod Range 120x240 – 300x500 mm Reading - 1° # Marking-off tools (scribers) Straight scriber – one sided (with knurled handle); # Bended tip scriber – two sided (with knurled handle); # Trammel for tracing and marking with small base; # Vernier caliper with two needles and fine adjustment; # Height gauge with fine adjustment.
Brass honey scrap.
Cold mix asphalt (cold patch) packed in bags, reinforced plastic bags for packaging cold mix asphalt (cold patch), additives for cold mix asphalt (cold patch), bagging machines for packaging cold mix asphalt (cold patch).Transportation and shipping
Steel scrap.
Pine nuts.
Honey scrap, ocean scrap, copper scrap.
C10MS.10 C10MS.12 C13ST.6 C13ST.8 C13MBT.10 C13MBT.12 C13MBT.14 CAPACITY: Centers height mm 370 400 400 Swing over bed mm 730 800 800 Swing over cross slide mm 485 540 540 Swing in gap mm 920 1050 1050 Width of bed mm 520 540 540 Distance between mm 1000, 1500, 2000, 1500, 2000, 3150, 1500, 2000, 3150, centers 3000, 4000 4400, 5000, 6200 4400, 5000, 6200 SPINDLE: Spindle bore mm 260 315 230 290 260 310 356 Spindle nose DIN /11 DIN/12 160 210 350 410 470 HEAD STOCK: No. of spindle speeds 12 24 24 18 18 Spindle speed range rpm 8 - 400 6.3 - 850 6.3 - 670 / 6.3 - 315 Main motor power kW 11 (15) 15 (18.5) 15 (18.5) FEEDS: Number of feeds 76 88 88 Longitudinal feed range mm/rev 0.02 - 7.02 0.13 - 30.72 0.13 - 30.72 Cross feed range mm/rev 0.01 - 3.53 0.04 - 9.216 0.04 - 9.216 THREADS: Number of threads 64 62 62 Metric thread range mm 0.5 - 150 1 - 240 1 - 240 Inch thread range tpi 60 - 13/64 60 1/4 60 1/4 Module thread range Module 0.125 - 37.5 0.5 - 120 0.5 - 120 DP thread range DP 240 - 13/16 120 - 1/2 120 - 1/2 CARRIAGE: Cross slide travel mm 420 420 420 Top slide travel mm 145 200 200 TAIL STOCK: Quill diameter mm 105 110 (120) 110 (120) Quill taper Morse No.6 No.6 No.6 Quill travel mm 200 280 280 NET WEIGHT FOR DBC: 1000 mm Kg 4960 5180 - - 1500 mm Kg 5210 5430 4600 5000 2000 mm Kg 5460 5680 5100 5500 3000 mm (3150 mm) Kg 6300 6520 5700 6100 4000 mm (4400 mm) Kg 6820 7040 6500 6900 5000 mm Kg - 6900 7300 6200 mm Kg - 7900 8300.
Standard Machine Specification LCC 800 LCC 1000 LCC 1250 CAPACITY: Centers height mm 410 510 625 Swing over bed mm 890 1090 1320 Max. turning diameter over guideways for lathes with turret head mm 750 750 1000 Swing over cross slide mm 490 690 940 Swing in gap mm 1050 1250 1500 Width of bed mm 700 Distance between centers mm 1500, 3000, 4000, 5000 Max. turning length in chuck and live center for lathes with turret head mm 1150, 2650, 3650, 4650 MAIN SPINDLE: Spindle bore mm 155 Spindle nose DIN55027 No. 15 Spindle hole internal taper Metric 160 Front bearing diameter mm 200 HEAD STOCK: Spindle speed in two ranges rpm 2 - 250; 8 - 1000 Main motor power kW 30 Spindle max. torque Nm 5000 FEEDS: Longitudinal feeds (Z-axis) M/min 10 (max) Cross feed (X-axis) M/min 10 (max) Rapid traverse (Z-axis and X-axis) M/min 10 (max) Crosslide maximum travel mm 525 525 650 Z-axis feed torque N.m. 26.1 X-axis feed torque N.m. 10 CNC SYSTEM Options HEIDENHAIN, FANUC, SIEMENS, FAGOR TOOLHOLDER TURRET HEAD Tool section mm 40 x 40 Diameter of boring bar mm 40 Turret head position number 8 or 12 TAIL STOCK: Quill diameter mm 125 Quill internal taper Morse No.6 Quill travel mm 250 Tailstock movement Motorized NET WEIGHT DBC 3000 mm Kg 8800 9300 9800
Property PE 100MA PE 130MA PE 160MA PE 200MA Nominal press force: 1000 kN 1300 kN 1600 kN 2000 kN Carriage strokes: 18, 30, 51, 72, 85, 98, 115, 129, 146, 150 (mm) 19, 25, 38, 60, 82, 102, 120, 140, 155, 165 (mm) 20, 28, 43, 60, 77, 94, 117, 131, 149, 167, 180 (mm) 21, 33, 61, 117, 143, 165, 184, 200, 211, 220 (mm) Carriage height regulation: 100 (mm) 100 (mm) 100 (mm) 110 (mm) Maximum number of strokes/min: 65 60 50 45 Distance carriage - table: 400 (mm) 440 (mm) 460 (mm) 520 (mm) C-Frame depth: 330 (mm) 360 (mm) 400 (mm) 420 (mm) Working height of the table: 800 (mm) 800 (mm) 800 (mm) 800 (mm) Distance between the columns: 440 (mm) 490 (mm) 530 (mm) 510 (mm) Bolster plate dimensions: 1100x660x80 (mm) 1200x660x80 (mm) 1300x780x90 (mm) 1400x800x100 (mm) Electrical motor power 7.5 (kW) 11 (kW) 15 (kW) 15 (kW) Power of the auxiliary electrical motor regulating the carriage lifting 0.75 (kW) 0.75 (kW) 0.75 (kW) 0.75 (kW) Machine weight without tools and accessories: 8600 (kg) 9800 (kg) 14000 (kg) 16000 (kg) Power supply/frequency/phase ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f Pneumatic system pressure 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar) Maximum number of clutches per minute 15 (cl/min) 15 (cl/min) 15 (cl/min) 15 (cl/min) Maximum weight of the instrument mounted on the carriage: 180 (kg) 300 (kg) 500 (kg) 500 (kg)
Press is designed for bending of sheet material. * Operational modes: * Single * Free * Impulse * Body: welded and heat treated steel structure * Hydarulic block * Safety mechanical protection * Photo cell of the working area * Mechanical synchronizer * Mechanized rear limiter * Four-profile tool * Visualizer of carriage travel and rear limiter * El.board with pending control panel Technical information Property Pl 100/31 Pl 100/41 Pl 130/31 Pl 130/41 Maximum bending force(kn) 1000 1000 1300 1300 Reverse stroke force (kn) 160 160 210 210 Carriage stroke Minimum ( mm ) 50 50 50 50 Maxmum ( mm ) 180 180 180 180 Distance from the bending axis to the laterals(mm ) 400 400 400 400 Maximum stroke of the rear stop (mm) 500 500 500 500 Main electric motor power(kw ) 7,5 7,5 11 11 Tank capacity (litres) 160 190 160 190 Overal dimensions : Length(mm) 3800 4800 3800 4800 Width(mm) 2000 2000 2000 2000 Height (mm) 2650 2650 2650 2650 Weight (kg) 9800 11500 12000 14000.
Solid wood windows and doors.
Steel scrap, copper cathodes, iron ore.
Copper millberry, steel scrap, wire rod, steel billet, other metals.