Sharjah Machined Components Suppliers and Manufacturers

virgin polyester staple fiber 1.2-1.4d 38mm psf fiber Application: 1. yarn spinning, open end spinning and ring spinning, sock yarn, mop yarn 2. needle punch nonwoven, for geotextile, automotive interior, exhibition carpet, trunk nonwoven, insulation panels.

PET FLAKES The Recycling PET (Polyethylene Terephthalate) Flake is obtained from post-consumption of Recycling PET Plastics Bottles recycling. Strong material with light weight. The flake is processed by blowing, injection, and extrusion. SPECIFICATION: GRADE AA PVC CONTENT: 0.005% (50ppm) OTHER IMPURITY: 0.01% (100ppm) GLUE RESIDUE/GLUE: 0.02% (200ppm) GRADE A: PVC CONTENT:0.01% (100ppm) OTHER IMPURITY: 0.02% (200ppm) GLUE RESIDUE/GLUE:0.02% (200ppm) COLOR: CLEAR / NATURAL PURPOSE: For the raw material in many industries : Recycled PSF/Fiber, Strapping Band, Sheet, Bottle PACKAGING Jumbo bag LOADING 20 ton/40" container PRODUCTION CAPACITY 500 metric ton per month

The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D. Equipment Technical Data Titer Range dtex 6.67-16.67 Spinning Pos. nos. 6-24 Spinning Pitch mm 700, 750 Plant Capacity TPD 15-80 Spinneret dia. mm 328, 358, 410 Spinning Mechanical Speed m/min 500-1,500 Spinning Processing Speed m/min 500-1,300 Stretching Mechanical Speed m/min 240 Stretching Processing Speed m/min 230 Total Tow Titer at Stretching dtex 600,000-3,000,000 Stuffer Box Width mm 160-410 Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101 Bale Weight kg 200-350 Application: Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well. Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press

High Tenacity or Medium Tenacity Recycle Polyester Staple Fiber (white or black fiber) (Nearing to Virgin fiber)

This type Chips that is designed to resist burning and melting at low temperatures. Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating Description: Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220. The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180. Application: Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products. LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane. Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue. Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.

What is pe/pp bicomponent fiber? PE/PP bicomponent fiber is a type of synthetic fiber that is made up of two different polymers, polyethylene (PE) and polypropylene (PP), which are combined in a single filament. What are the advantages of using PE/PP bicomponent fiber in textiles? PE/PP bicomponent fiber offers several advantages in textiles, including improved strength, durability, and moisture management. It also provides a softer feel and can be used in a variety of applications, such as sportswear, outdoor apparel, and home textiles. What are some common uses of PE/PP bicomponent fiber in the textile industry? PE/PP bicomponent fibers have several advantages that make them popular in the textile industry. Some of these advantages include: Improved Strength: PE/PP bicomponent fibers have a higher tensile strength than regular fibers, making them ideal for use in high-stress applications. Enhanced Durability: These fibers are resistant to wear and tear, making them ideal for use in products that need to withstand daily use. Improved Comfort: PE/PP bicomponent fibers have a soft texture, which makes them comfortable to wear against the skin. Moisture Management: These fibers are hydrophobic, which means they repel water and moisture. This property makes them ideal for use in products that need to stay dry. Some common uses of PE/PP bicomponent fiber in the textile industry include: Clothing: These fibers are often used in the production of sportswear, outdoor clothing, and other products that require enhanced durability and moisture management. Home Textiles: PE/PP bicomponent fibers are used in the production of carpets, curtains, and other home textiles that require enhanced strength and durability. Nonwoven Fabrics: These fibers are used in the production of nonwoven fabrics, which are used in a wide range of applications, including medical products, hygiene products, and filtration materials. Overall, PE/PP bicomponent fibers offer several advantages that make them a popular choice in the textile industry for a wide range of applications.

What is PET Open Agent Film Chips? PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film. It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable. As an opening agent to be used with film grade base materials to produce various types of films. It can be used in films with special requirement for optical and surface properties or ultra-films below 8u. Can be used directly in foodstuffs after FDA approval.

PET FLAKES The Recycling PET (Polyethylene Terephthalate) Flake is obtained from post-consumption of Recycling PET Plastics Bottles recycling. Strong material with light weight. The flake is processed by blowing, injection, and extrusion. SPECIFICATION: GRADE AA (B to B flakes) PVC CONTENT: less 0.005% (50ppm) OTHER IMPURITY: less 0.01% (100ppm) GLUE RESIDUE/GLUE: less 0.02% (200ppm) GRADE A: (Sheet or Filament Grade) PVC CONTENT: less 0.01% (100ppm) OTHER IMPURITY: less 0.02% (200ppm) GLUE RESIDUE/GLUE: less 0.02% (200ppm) COLOR: CLEAR / NATURAL PURPOSE: For the raw material in many industries : Recycled PSF/Fiber, Strapping Band, Sheet, Bottle PACKAGING Jumbo bag LOADING 20 ton/40" container PRODUCTION CAPACITY 500 metric ton per month

Flame Retardant Resistant Aramid Staple Fiber, Kevlar Staple Fiber, Aramid Thread or Staple Fiber

What is PET Open Agent Film Chips? PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film. It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable. As an opening agent to be used with film grade base materials to produce various types of films. It can be used in films with special requirement for optical and surface properties or ultra-films below 8u. Can be used directly in foodstuffs after FDA approval.

Sodium chlorate is an inorganic compound with the chemical formula NaClO3. It is a white crystalline powder that is readily soluble in water. It is hygroscopic. It decomposes above 300 C to release oxygen and leaves sodium chloride. Several hundred million tons are produced annually, mainly for applications in bleaching pulp to produce high brightness paper. The main commercial use for sodium chlorate is for making chlorine dioxide (ClO2). The largest application of ClO2, which accounts for about 95% of the use of chlorate, is in bleaching of pulp. All other, less important chlorates are derived from sodium chlorate, usually by salt metathesis with the corresponding chloride. All perchlorate compounds are produced industrially by the oxidation of solutions of sodium chlorate by electrolysis.

Fibre Fill Polyester Filling Microfiber Fiber 0.9d Down Like Virgin Micro Gel Fiber Hot Sale Virgin Down Like Polyester Fiber filling fiber hollow conjugated fibers recycled polyester stuffing fiber 1) Denier:0.8D-1.5D 2) Cut length:22MM/25MM/32MM/38MM/51MM/64MM/71MM/76MM 3) Luster:raw white Virgin and recycled grade 4) Siliconized and no siliconized 5) Merits: high intension, stable stretch elongation, highly elastic, puffed, high ratio of hollowness 6)Excellent fluffy performance, pleasing hand feeling, plump, gentle, luster 7) Usage: suitable for filling toys, pillows, cushions, and other products need to be filled ; make pearl cotton. bedclothes , man-made fur, filler materials, sofa and others 8) Weight: around 300kgs/bale 9) Package: woven bag Container load: around 34 bales for a 20GP,around80 balesfor a 40HQ 10) Delivery Time: within 15 days after receiving the deposit

3mm 6mm 100% Virgin New PP Material Staple Monofilament Polypropylene Fiber 0086-13915721168 Product number: PP Micro fiber Equivalent diameter: 15-48 um Elastic Modulus: â?¥3500 M�·pa Breaking strength: â?¥ 560 M�·Pa melting point: 160-180�°C proportion: 0.91-0.93 g/cm�³ length: 3-20mm (as custom requirement) Acid and alkali resistance (strong retention rate) â?¥96% 1. PP pressed Woven Bag 2. 300-350kg/ bale 3. About 9-10Tons / 20'FCL 4. About 21-22Tons / 40'FCL

100% Polyester 30S/1 Ring Spun Yarn Raw White Polyester Yarn Material: 100% Polyester, 100% Polyetser Pattern: Raw white Technics: RING SPUN Yarn Type: Spun Feature: High Tenacity Use: Weaving, Knitting, Sewing Twist: Standard Evenness: Excellent Yarn Count: 30S/1 Place of Origin: IRAN Samples: free Package: yarns on cone

Specification: 3-110D * cutting length 5~102mm, color can be according to customer`s requirement. Our products can be used in non-woven, automotive interiors, geo-textiles, speaker cloth and needle carpet, spinning wool, filters, adsorption materials. Our fiber also can be added flame retardant, anti-UV, anti-aging properties according to the customer's requirement.

Making wadding and padding materials 7D*64mm HC non silicon polyester staple fiber white color 054310599 Our siliconized fiber mainly can be used in home textile, such as filling sofa, pillow, cushion and winter clothing and non siliconized mainly can be used in non woven fabrics, such as padding, mattress and wadding.

Regenerated 1.4D 1.5D 3D 6D 7D 15D Black Polyester Staple Fiber for Nonwoven Carpet -Textile yarns.the end products are clothing, home textiles, decorative cloth, etc. -Nonwoven. the end products are wet wipes, masks, etc. -Filling.the end products are winter clothes, pillows, toys,etc.

The main raw material of PTA and MEG is added with modifiers of third monomer and fourth monomer, etc., then subjected to copolymerization reaction to make modified polyester pellet with melting point at 100'C - 225C. Functional characteristics low melting point, good spinnability and excellent fiber adhesion effect Application scope manufacturing bi-component core-sheath fiber and filament yarns, etc. Specification - LOW MELTING PET CHIPS TRB FIBER GRADE 110-225.

ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm