Ferrous sulphate, copper sulphate.
Copper rod casting machine, copper wire drawing machine, copper wire stranding machine, struder machine.
Wire rod, rebar, HR/CR coil, section steel, stainless steel, coke, ferroalloy.
with four rope, two rope and single rope configurations suitable to work with various types of lifting cranes to handle different types of materials such as scraps, ore, refuse etc
Light gauge: 0.0002"(0.005mm) to 0.0035"(0.009mm) Medium gauge:0.00039"(0.010mm) to 0.00389"(0.099mm) Heavy gauge: 0.0039"(0.100mm) to 0.0079"(0.200mm) Special use below 0.005mm. Wooden case.
Nickel alloy wire 6.Nickel wire(alloy 201) Less carbon content than nickel 200, Chemical compositions: CCuFeMnSiSNi Max 0.02Max 0.25Max 0.40Max 0.35Max 0.35Max 0.01Balance A low carbon variety of nickel alloy 200 possessing low annealed hardness and a very low work-hardening rate desirable for cold forming operations. It is highly resistant to corrosion by neutral and alkaline salt solutions, fluorine and chlorine. Has been used in food and synthetic fiber processing, heat exchangers, chemical and electrical industries. Shanghai tankii alloy material co., ltd Is specialized in production of ni-cr alloy, cu-ni alloy, fechral, thermocouple wire, pure nickel and other precision alloy materials in the form of wire, strip, rod, bar and plate. Diameter 0.15-10mm
Copper claded aluminum wire, copper claded steel wire, hot shrinkable sleeve.
Nickel alloy, resistance wire, thermocouple wire, copper nickel alloy.
Instant cold/hot packs, reusable cold hot packs, sports cold/hot compressionn wraps, crystal gel beads packs, elasto gel packs, moist heat packs, pain relief heat patches, cool mats.
Spring products * disc springs. : precision spring Large diameter and special materials Engineering spring * die springs : rectangular wire section Round wire section * compression springs * extension springs * torsion springs 001
The NiFe alloy is suitable for welding all grades of cast iron but particularly for spheroidal graphite (SG), nodular or ductile irons and some alloy cast irons. It provides compatible strength, ductility and toughness, coupled with good machinability. The NiFe consumables can also be used on some of the high alloy austenitic irons (Ni-Resist). The flake graphite grades are welded with a preheat of 300-350°C but the SG grades are best buttered using low heat input, and low temperature techniques to avoid HAZ hot cracking. Note the martensitic Ni-Hard cast irons and white irons are generally considered to be unweldable because they are too crack-sensitive. The NiFe consumables are also suitable for welding transition joints between cast iron and cast steels, and cast iron and mild/low alloy steels. Typical components are machine bases, pump bodies, engine blocks, gears and transmission housings.
Description ERCuAI-A2 is a copper based filler metal containing about 1% iron used for gas-tungsten arc welding and gas-metal arc welding of copper, copper-nickel, brass, bronze, steel, galvanized steels and also cast iron. Most common applications would include marine maintenance and repair, ship propellers, pump housing, rigging jacks, piston heads, bearings and excellent for build-up or overlaying wear/corrosion resistanceapplications. Combinations of Copper or Aluminum Bronze base metals to steel are very common with this filler. Exhibits high mechanical properties and hardness. Applications ERCuAI-A2 is used to weld and join many ferrous and nonferrous metals and combinations of dissimilar metals. Contains an additive to inhibit inter-granular stress corrosion cracking. This is particularly important when welding on C61300 and C61400 base metal. Some applications include building up bearing surfaces, joining and fabricating copper alloys, overlaying for resistance to corrosion and erosion. Product Details Chemical composition: Grade Chemical composition(%) ERCuAI-A2 Cu+Ag Al Fe Si Zn Pb others Bal 8.5~11.0 5.0~1.5 â?¤0.1 â?¤0.02 â?¤0.02 Â
Description FeCrBSi is a solid thermal spray wire used for arc spray systems. It produces a partially amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1700° F. High chrome like finishes can be obtained by typical grinding and lapping techniques. FeCrBSi is used in a wide variety of high wear applications, anti-skid surfacing applications and corrosive environments. It can Equivalent to Tafa 95MXC, Armacor M. Applications Boiler Tubes & Tube Shields,Yankee Dryer Rolls ,Anti-Skid ,Fan Blades ,Drill Collars. Product Details Chemical composition Grade Chemical composition(%) FeCrBSi Cr Mn Si B Fe 27~29 1.5-2.0 1~2 3~4 Balance Physical Properties Grade Density Melting point FeCrBSi 7.3g/cm3 1530 °C Typical Deposit Characteristics Typical Hardness Bond Strength Deposit Rate Deposit Efficiency Machilityineab HRC 55-60 6000 psi 10 lbs/hr/100A 0.7 Good Sizes & Packaging: Diameter Packaging      Wire Weight 1/16" (1.6mm) MIG (D 300) 15kg((33 lb)/spool Note that special sizes, or packing requirements are available on all requests.
Description Amorphous Alloy is a cored wire specifically designed for arc spray systems. It produces an amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1700° F. The inclusion of 2.0% aluminum in the formulation results in extremely high bond strength and particle to particle adhesion. High chrome like finishes can be obtained by typical grinding and lapping techniques. Vecalloy B can be used in a wide variety of high wear applications, anti-skid surfacing applications and corrosive environments. It can equivalent to Vecalloy B. Applications Boiler Tubes & Tube Shields Yankee Dryer Rolls Anti-Skid Fan Blades Drill Collars Hydraulic Shafts Product Details Chemical composition Grade Chemical composition(%) Vecalloy B Cr Nb B Ni Si Mn Al Fe 13 6 4 6 1 1 3 Balance Typical Deposit Characteristics Typical Hardness Bond Strength Deposit Rate Deposit Efficiency Corrosion Resistance HRC 65-70 10000 psi 10 lbs/hr/100A 80% Excellent Sizes & Packaging Diameter Packaging Wire Weight 1/16" (1.6mm) MIG (D 300) 15kg((33 lb)/spool Note that special sizes or packing requirements are available on all requests.
Type: Pans Pans Type: Saute Pans Metal Type: Stainless Steel Certification: CE / EU, CIQ, EEC, FDA, LFGB, SGS Feature: Eco-Friendly, Stocked Place of Origin: Zhejiang, China (Mainland) Brand Name: Fountainwoods Model Number: WLD-F026-10 Name: Stainless Skillet Usage: Kitchen / Outdoors Color: Silvery Size: 26/28/30cm Material: 304 Stainless Steel Thickness: 2.5mm Handle: Stainless Steel Lid: Stainless Steel Lid Interior: Non-stick Body Structure: Three Layers
we have 304. 301.302 and so on 300 series of stainless steel plate,sheet coils and more
The cable is suitable for FTTH purpose, if the strength unit is replaced by copper line, the cable can be used for optical cable and telephone transmission line. 1km/drum.
Thermal spray wire, welding consumables, copper foil, titanium wire, titanium rod, bar.
Optical fiber cable, copper fiber cable (cat5, cat5e, cat6), security control system, (syv, sywv).Trading copany, national electrical system
Titanium, nickel, tantalum, niobium, molybdenum, tungsten, zirconium, copper, aluminum, stainless steel, chromium, cobalt and indium.