10 ball pen pack in blister card
5pcs glitter shaker *9gr pack in blister
10pcs magic mini highligher felttip pen in colorbox
It has acid and alkali resistance, microbial resistance, wear resistance, bending resistance, oil resistance, impact resistance, aging resistance, tear resistance, non-toxic, tasteless, antistatic, flame retardant, anti UV and so on This product has been widely used in electronic, petrochemical, coal, shipbuilding, aviation, military, automobile, engineering machinery manufacturing, sports equipment, medical and so on
It has acid and alkali resistance, microbial resistance, wear resistance, bending resistance, oil resistance, impact resistance, aging resistance, tear resistance, non-toxic, tasteless, antistatic, flame retardant, anti uv and so on This product has been widely used in electronic, petrochemical, coal, shipbuilding, aviation, military, automobile, engineering machinery manufacturing, sports equipment, medical and so on
The PVC sleeve is a flexible, non shrinkable casing. Good electrical and physical properties. Widely used in electronic components, household appliances, automobiles, stationery and other fields. 105 degree ULPVC material The working temperature is from -15 to 105 centigrade Rated voltage 300V, 600V Flame retardant UL224VW good insulation performance Good softness Oil resistant and acid resistant Protective machine hanging wire and lead
The pvc sleeve is a flexible, non shrinkable casing. Good electrical and physical properties. Widely used in electronic components, household appliances, automobiles, stationery and other fields. 105 degree ulpvc material The working temperature is from -15 to 105 centigrade Rated voltage 300v, 600v Flame retardant ul224vw good insulation performance Good softness Oil resistant and acid resistant Protective machine hanging wire and lead
The PVC sleeve is a flexible, non shrinkable casing. Good electrical and physical properties. Widely used in electronic components, household appliances, automobiles, stationery and other fields. 105 degree ULPVC material The working temperature is from -15 to 105 centigrade Rated voltage 300V, 600V Flame retardant UL224VW good insulation performance Good softness Oil resistant and acid resistant Protective machine hanging wire and lead
The PVC sleeve is a flexible, non shrinkable casing. Good electrical and physical properties. Widely used in electronic components, household appliances, automobiles, stationery and other fields. 105 degree ULPVC material The working temperature is from -15 to 105 centigrade Rated voltage 300V, 600V Flame retardant UL224VW good insulation performance Good softness Oil resistant and acid resistant Protective machine hanging wire and lead
Grease flow meter Porter:sales9@gnflowmeter.com Site:www.microflowmeter.com Skype:shcixi_ru Grease flow meter(mini oil water flow meter) principle is a liquid pushing one pair of oval gears; volume of each cavity is a fixed volume; gear speed leads, the sensor sends the sync pulse count, oval gear rotated by the magnetic seal coupling and reduction gear mechanism passed directly to the counter indicates the total flow through the meter. If the additional transmission means, the display together with electrical instrument can achieve remote only instantaneous flow or accumulated flow. The grease flow meter with 0.2% accuracy and low flow range.the high temperature is 200C,the max pressure is 1000Bar.the output is pulse and material is stainless steel and aluminum. Model Flow range Connection CX-M2-SS/AL 0.5~150 ml/min G1/8 female thread CX-M3-SS/AL 1-300 ml/min G1/8 female thread CX-M5-SS/AL 5-1000 ml/min G1/8 female thread CX-M6-SS/AL 0.5-100 l/H G1/4 female thread CX-M9-SS/AL 5-550 l/H G1/4 female thread CX-M12-SS/AL 1~30 L/min G1/2 female thread CX-M25-SS/AL 5-110 l/min G1 female thread CX-M40-SS/AL 10-250L/min G1 1/2 female thread CX-M50-SS/AL 10-500L/min G2 female thread Select the JSN and select the grease flow meter,we will provide the professional service for you.
Vacuum Pump Manufacturer from Shanghai YiYou German vacuum pumps are widely used in vacuum packaging and many other areas of the vacuum pump, providing a strong power, proven, reliable operation. Oil circulation lubrication, single stage compressed rotary vane vacuum pump. 1, the standard motor direct drive, can be customized special specifications. 2, simple and compact structure, suitable for all types of mechanical matching. 3, the suction port is equipped with a check valve to prevent the pump oil into the vacuum system. 4, smooth operation, no special fixed and shock absorber. 5, air-cooled, no water cooling. 6, equipped with oil and gas separation device, exhaust clean, low noise, in line with environmental requirements. 7, reliable oil circulation structure, to ensure long-term continuous operation. 8, installation and maintenance operation is simple, low operating costs.
Ball pen, pencil, highlighter marker, crayon oil pastel, chalk, watercolor paint brush, canvas whiteboard file, notebook, eraser, ruler, stencil, sharpener, scissor, correction glue, tape, tape dispenser, pencil case, stapler punch, calculator.
Pneumatic valve actuator description: 14 types ( da 32- da 270 ). Offering a broad range of pneumatic rack & pinion actuators. The ports are namur standard for easy solenoid valve connection. Iso 5211 dimensions on all sizes. All internal and external surfaces are anodized for corrosion resistance. Actuator have a regulation range from-4° to +4°. Shaft bearings isolate the pinion gear from the housing and support the shaft for high cycle. Actuator can be lifted on many styles of quarter-turn valve, including ball, butterfly and plug and dampers. Pneumatic valve actuator operation: Working pressure: 2.5 bar – 8 bar. Working temputure: Standard range: -20? - +80?. Low temperature range: -40? - +80?(hnbr). High temperature range: -20? - +150?(vition). Factory lubricated for life under normal vorking. Operating media – dry or lubricated air, non-corrosive and inert gas or light hydraulic oil. Angle of rotation: 0° to -90°± 4°.
DER cold laminated film can increase the texture of the image and protect the graphic It can be widely used in wedding phase oil painting calligraphy and painting outdoor posters advertising all kinds of pictures documents information and so on DER cold laminated film can increase the performance of the image and protect the graphic   cold laminating film roll can be widely used in wedding phase oil painting calligraphy and painting outdoor posters advertising all kinds of pictures documents information  and so on 1 self adhesive laminating film Product information PVC film thickness 006mm 008mm Glue normal glue or stronger glue Style glossy film Matt film Frosted film texture film Anti UV Backing paper 75g100g Max width152cm Roll Length50m 2 lamination films Applicant Cover on printed one way vision film selfadhesive vinyl painting outdoor poster and other printed material
1. Phenol-formaldehyde resin 2402 is a curing agent for rubber such as butyl rubber, natural rubber, styrene-butadiene rubber (SBR), silicon-butadiene rubber, especially applicable to sulfurizing butyl rubber. 2. It can be used to produce chloroprene rubber adhesive, with good compatibility with chloroprene adhesive. It is especially applicable to the adhesive for shoes. 3.In coating industry, it can be used to produce end coating for external use, lacquer for floor, marine coating, antirust paint, water based printing ink, and can be used as material of thin film anti-rust oil products. 4. It can be used both as sulfidizer, intensifier and tackifier when producing terylene adhesive tape, oil pipe anti-corrosive adhesive and adhesive tape, etc, to improve the properties and extent the service period of products. 5. The effect will be even better if using 2402 resin together with terpene resin.
Wisdom ss316 arc spray wire Description Ss 316 stainless steel wire specifically designed for arc spraying. It produces dense, Well-bonded coatings with excellent machine ability and wear and corrosion resistance. Ss316 is Widely used for machine element repair, dimensional restoration and wear resistance applications. It has relatively high shrink characteristics and should not be used for coatings over 0.075 inches thick. Typical deposit characteristics: Typical hardness hrb 90-100 Bond strength 6750 psi Deposit rate 10 lbs /hr/100a Deposit efficiency 75% Wire coverage 0.8 oz/ft2 / m Surface texture *variable Machine ability good * depends on air pressure used. Surface preparation: Surface should be clean, white metal, With no oxides (rust), dirt, grease, or oil On the surface to be coated. Note: it is Best not to handle surfaces after Cleaning. Recommended method of preparation Is, to grit blast with 24 mesh aluminum Oxide, rough grind, or rough machine in A lathe. Application: Part restoration Rams Food industry rolls Specification: 316 ss Nominal chemical composistion (wt%): Cr ni mn si fe 17.0 12.0 2.0 1.0 bal Recommended spray parameters: Diameter air pressure voltage amperage standoff 1/16" (1.6mm) *50 - 60 psi *28 - 30 *100 - 200 *4 - 6 in (10 - 15cm) * parameters are typical and may vary depending on equipment used. Contact your equipment manufacture for optimum spray parameters. Standard sizes & packaging: Diameter packaging wire weight 1/16 (1.6mm) d300 spool 15kg (33lb)/spool
Introduction Babbitt alloys remain consistent from edge-to-edge and end-to-end through thousands of pounds of ingots and bars, and through thousands of miles of spray wire. Babbitt formulations meet or exceed their engineering standards. With higher productivity, less rework, less cleanup. Fewer defects and higher quality finished products. The coatings are ductile, low in oxides and exhibit a bright, metallic appearance. It can equivalent to: tafa 04t, sulzer metco spraybabbit Surface preparation Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the surface to be coated. Note: it is best not to handle surfaces after cleaning. Recommended method of preparation is, to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe. Application Bearing surfaces Product details Chemical composition: Type Chemical composition Sn Sb Cu Other Babbitt wire 90 7~8 3~4 0.25 Specifications Grade Aws Babbitt wire C2.25 / c2.25m w-snsbcu-1 Physical properties Grade Density Melting point Babbitt wire 6.67 g/cm3 354 °c Typical deposit characteristics: Typical hardness Bond strength Deposit rate Deposit efficiency Machilityineab Nil 3000 psi 48 lbs /hr/100a 70% Good Standard sizes & packing: Diameter Packing Wire weight 1/8(3.17mm) D 300 spool 15kg(33 lbs)/spool Other sizes can be produced by customers' requirement.
industrial laundry washer extractor 10kg 20kg 25kg 30kg 50kg 70kg 100kg 120kg hotel laundry washing machine , widely use for hotel, hospital laundry room. Big Capacity Laundry Washing Machine and Dryer 1. Fully automatic industry washing machine, microcomputer-controller, freely programmable, 30 possible programmes, operator could set flexible. 2. High quality stainless steel, good appearance, long life. 3. Full suspension shock structure, low shake, low noise, combination of shock absorbers and springs for maximum absorption, need no excessive foundations. 4. Imported bearing, precise and durable. 5. Fixed screws support for long-distance transportation, avoid shaking damage during transit. 6. High quality inverter system, easily realize washing and extracting frequency stepless adjusting. 7. Multiple sealing system, oil sealing, water sealing, stainless steel sealing. 8. Built-out bearing lubrication, simple operation, convenient maintenance. 9. Safety door interlock system, reduce fatigue, misuse and the risk.
Product introduction titanium dioxide anatase A101 titanium dioxide anatase A120 titanium dioxide anatase A130 titanium dioxide anatase A200 Functional modified titanium dioxide pigment, using advanced technology theory and modified, titanium dioxide to improve the quality of existing and enhancement is a new type of titanium dioxide can be equivalent alternative pigment. ITEM SPECIFICATION Tio2 content % 98.0min Whiteness Close Tint-strength 100 Oil Absorption Value 18-26 g/100g PH Value 6.5-8.0 Volatile (105) % 0.2 max Median Grain Size 0.3-0.4μm Activation Degree % 99max Features -High dispersive -High color strength -high hiding power -Excellent weatherability -low oil absorption Application: The product is general- purpose titanium dioxide anatase type, which is with a file and uniform particle size, narrow particle size distribution, excellent optical properties, good dyeing property , high purity, good whiteness, high hiding power, low oil absorption, and good dispersibility. This product is mainly recommended in low weatherability grade plastic master batch and other plastic industries. It also can be used for paints, paper, road marking paints, rubber, ink, printing and dyeing industries. CAS NO.: 13463-67-7 Packing: in 25kgs net bag, 20-22 mts in the 20FCL Delivery: within 15-20days after received your L/C at sight or T/T in advance.
A100 General use anatase titanium dioxide Product description: A100 is anatase titanium dioxide pigment produced by the sulphate process with advanced technology, having excellent pigment properties such as high purity, fine particle size and narrow size-distribution, high whiteness, excellent dispersibility, low oil absorption and strong hiding power. Anatase titanium dioxide pigment a100 with outstanding dispersibility is specially designed for the top grades applications, the quality is equivalent to cosmo ka100. Applications: Anatase titanium dioxide pigments a100 is high-quality general use tio2 product that can be applied in coatings, interior-wall latex painting, inner decorative painting, ink, plastic, rubber, paper, leather industries and also suitable for glass, ceramics, enamel and fiber making industries, etc. Basic information: Name: Titanium dioxide (tio2) Cas no.: 13463-67-7 Einecs no.: 236-675-5 Color index: 77891, pigment white 6 Iso591-1:2000: A1 Astm d476-84: I Appearance: White powder Specific gravity: 3.9 g/cm3 Technical specifications:(standard:q/snbj1-2012) Property A100 Tio2 content % =98.5 Color (compared with standard sample) ?l*(sample-standard sample) ?s=(?a2+?b2)0.5 Not lower than =-0.3 =0.5 Matter volatile at 105�c % =0.5 Matter soluble in water % =0.4 Residue on sieve 45�m % =0.05 Ph of aqueous suspension 6.5-8.0 Brightness % =98.0 Oil absorption g/100g =23 Tinting strength (compared with standard sample) % =110 Package: 25kg paper-plastic compound bag, or as clients' requests offer 500kg/1000kg big woven plastic bag. Storage and safety: The product is a kind of white powder which is safe, nontoxic and harmless. Keep from moisture during transport and should be stored in a cool, ventilated, dry place. Avoid breathing duct when handling, and wash with soap & water in case of skin contact. For more details, please refer to the material safety data sheet.