Key Features 1.It has a high thermal conductivity 2.Excellent comprehensive properties, elasticity, non-yellowing, no bleed oil 3.Moisture, dirt and other atmospheric composition proof 4.Relieving the mechanical stress and tension that cased by machinery, heat shock and vibrate 5.Good corona resistance and electrical insulation performance 6.Excellent outdoor aging-resistance for 20-30 years 7.Stable mechanical and electrical properties between -60- C Typical Applications Used for sealing LED lamps, thermal dissipation of auto electrical components, PCB and other heat dissipation components. Gap filling between power transistor, diode thyristor and substrates. Technical Data Table PROPERTY STANDARD/UNITS VALUE Before curing SI1316 SI1317 Color Visual inspection White Viscosity 25 227;C, mPa 8226;s Paste Density 25 227;C, g/cm3 1.65 2.25 Tack free time 25 227;C, 55%RH, min 2~5 2~5 After cured Hardness Shore A 50 1615 Thermal conductivity W/m.K 0.82 1.50 Elongation at break % 150 100 Tensile strength MPa Y1 90 Y2 Shear strength MPa, iron/iron Y1 Y2 Dielectric strength kV/mm, 25 227;C 20 20 Loss factor 1 MHz, 25 227;C 0.09 0.09 Dielectric constant 1 MHz, 25227;C 2.9 2.9 Volume resistance (DC500V) | 8226; cm 2.01014 2.0 1014 SI1316. 310ml/tube, 25 tubes/carton; 100ml/tube, 100 tubes/carton. SI1317. 310ml/tube, 25 tubes/carton
1. 1:1 addition type, good adhesive strength and self-healing 2. High elongation, excellent flexibility for mechanical stress relieving 3. Low oil penetration after cured, good anti-poisoning property 4. Good dielectric in high temperature for high voltage protection 5. Excellent aging resistance and weatherability 6. Excellent waterproof, corrosion prevention, moisture proof and chemical media resistance Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector. PROPERTY STANDARD/UNITS VALUE of SI2709 ---- ---- PART A PART B Material ---- Polysiloxane Hydrogen polysiloxane Color Visual inspection Colorless Liquid Colorless Liquid Viscosity 7;C, cps 800~1000 800~1000 Density 7;C, g/cm3 0.99 0.99 Mixture/mass ratio ---- A:B=100:100 Viscosity of mixture 7;C, cps 800~1000 Operation time 7;C, min 60 Cure condition RTV or HEAT 7;C /6 hour;67;C /30min Cured appearance ---- Colorless transparent gel Needle penetration 1/mm 75 Dielectric strength KV/mm 25 Volume resistance DC500V, ohm-cm 1.0¨¢1015 Loss factor 1 MHz88;0.001 Dielectric constant 1 MHz 2.8 Application temperature7;C -60~260 Part Aa10 KG/Bucket, Part Ba10 KG/ Bucket.
1.Solvent free two component material 2.Transparent both before and after cured 3.Platinum catalyzed curing system 4.No by-products after curing 5.Low viscosity before cured, easy to application 6.Excellent flexibility, free from stress 7.Extremely low oil exudation, good anti-poisoning 8.By adjusting the mix rate of part A and part B, can adjust the gel adhesion 9.It can stick repeatable 10.It can use with polyethylene release liner 11.Pass test of physiological compatibility, poison cell, skin stimulus etc. PROPERTY STANDARD/UNITS VALUE of SI2721 ---- ---- PART A PART B Material ---- Polysiloxane Hydrogen polysiloxane Color Visual inspection Transparent Liquid Transparent Liquid Viscosity 7;C, cps 61;¨¤150161;¨¤150 Density 7;C, g/cm3 0.99 0.99 Mixture/mass ratio ---- A:B=100: (80~120) Viscosity of mixture 7;C, cps 800¨¤150 Operation time 7;C, min ¡ê¾60 Cure condition RTV or HEAT 7;C /6 hour; 67;C /5min Cured appearance ---- Transparent gel Application temperature §C -60~200 Part Aa20 KG/Bucket, Part Ba20 KG/ Bucket; Part Aa200 KG/Drum, Part Ba20 KG/ Drum. Part A is also available in 200 kg metal drums accompanied by the corresponding 200 kg of Part B.
Item Name: About RIKO Scope of services: 1. Rapid Prototyping service 2. CNC model, SLA /SLS prototypes 3. Aluminum/Brass/Copper/Bronze CNC machining/machined parts 4. Prototype design: 5. Rapid silicon parts and vacuum casting 6. Reverse engineering Materials available: ABS, POM, PP, PC, PU,PE, PMMA,Nylon, PA+GF,PPS, PVC, Aluminum, Brass, Copper ,Rubber,SUS and etc. Main customers: ZET,Lenovo,HTC,Coolpad,Povos,Flyco and motorola Lead time: Within 5 days or according to order quantities Surface treatment available: Polish, transparent surface, translucent surface, painting, rubber oil, Silk-screen printing, rubber,brushed, anodizing, electroplating,hardened and etc. Acceptable drawings: Pro/E, Solidworks, Unigraphics, Catia, Auto CAD, *.igs, *.stp, *.stl, *.x-t The industry we serve: 1. Electronic, digital camera , DVD/VCD ,MP3/4 , Coffe oven, hair dryer, LED light case and so on 2. Medical devices, BUltrasound scanner case, automative,ventilator,ECG monitor ,Digital Ultrasonic Diagnostic Imaging case, and etc 3. Telecommunications, micro speaker, phone prototype, computer, video and etc 4. Household appliance, Rice cooker, Air conditioner, Induction cooker, TV, ,fridge,coffee machine Fanshower and etc. 5. Kitchenwares,Crafts, Perfume bottle, Lighter,Kitchenware, Cookie molds, Utensil handle, Coffee glass prototype, and etc 6. Toys, Game handle/controller, Toy plane and etc. Customized.
T321a, new type sulfurized isobutylene without chlorine using new technology, with high sulfur content have unique solubility in mineral oils, excellent extreme pressure (ep) property and thermal stability, can be utilized in a variety of formulations in combination with other chemical components, to prepare lubricants meeting various performance requirements for gear oil, metal working oil, grease and anti-wear hydraulic oil. The reference dosage is 1.0-10%.
Condition:New Applicable Industries:Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Advertising Company Showroom Location:Egypt, Canada, United Kingdom, United States, Italy, France, Germany, Viet Nam, Philippines, Brazil, Peru, Saudi Arabia, Indonesia, Pakistan, India, Mexico, Russia, Spain, Thailand, Morocco, Kenya, Argentina, South Korea, Chile, UAE, Colombia, Algeria, Sri Lanka, Romania, Bangladesh, South Africa, Kazakhstan, Ukraine, Kyrgyzstan, Nigeria, Uzbekistan, Tajikistan, Japan, Malaysia, Australia Video outgoing-inspection:support Machinery Test Report:support Marketing Type:Hot Products Warranty of core components: The latest recommended products Core Components:Nano-gold electric field, Smart power, Carbon steel sheet Place of Origin:Shanghai, China Brand Name:KUARBAA Warranty:1 year warranty and lifetime maintenance service Product name:Smoke Purifier Machine Type:Air Filter Function:Cleaning Machine Oil Mist Material:Carbon Steel Spraying Voltage:220/230ACV/50/60HZ HEPA Filter:99.999% Efficiency Inlet velocity:3M/S applied temperature:-30-65 Contour size:850-710-640mm Equipment weight:98KG After Warranty Service:Video technical support, Online support, Spare parts Local Service Location:Egypt, Canada, United Kingdom, United States, Italy, France, Ge
The MTW series mills adopt bevel gear integral transmission, inner light-oil lubrication system, arc whirl tube and another proprietary technology. Features: 1, Bevel gear integral transmission: the traditional mill needs decelerator and ratcheting to drive the main shaft that increase the centering difficulty and is easy to bring noise as well as reduce the efficiency. Mtw series mills adopt bevel gear integral transmission that compact the whole structure and simplify the installation as well as improve the efficiency. 2, Inner light-oil lubrication system: the traditional millsf+ lubrication adopts grease lubrication which increases the resistance of lubrication, creates high inherent temperature and shortens the service life of bearing. Mtw series mills adopt light-oil lubrication achieve the lubrication of bearing without oil pump and lubrication station. 3, Arc whirl tube: the traditional mills adopt board-type whirl tube that increases the resistance, reduces the performance, and stops the air flow and so on. Mtw series mills adopt arc whirl tube reduce the resistance and avoid the air-stop and so on. 4, Curved surface shovel with changeable edge: the traditional mills adopt quick wear edge and edge combine with shovel. If the edge is worn, all of the shovel should be changed that increase the cost and the stop time. The edge of mtw series mill adopts wearable alloy materials which improve the service life. The changeable edge is easy to change that save time and cost. The traditional flat shovel make the materials accumulate in one level that reduces the ring and roller service life. The curved surface shovel makes a vertical material liner which increases the working face and capacity.
Product description: The cone crusher of CS series, widely used in the industries of metallurgy, building material, road construction, chemical engineering & silicate, is suitable for crushing all kings of ores and rocks with hardness of medium or above. This machine features are the high crushing ratio, high efficiency, high handling capacity, low operation cost, easy adjustment and economical operation. As components selection and structure design is reasonable, the machine has a long performance life. So the final products size is uniform, and reduces the circulation load. In the medium and large size crushers, hydraulic cleaning chamber system is used, which decrease the downtime. There are wide ranges of crushing chambers, so customers can choose the different chambers upon their different requests freely. This machine adopts grease sealing so as to prevent the watering and draining system from being blocked and avoid the defect of easy mix of water and oil. The spring safety system is the protection unit against overload, and keeps the crushing chamber from being damaged by foreign substance or iron pieces. This machine is divided into two types; the standard type and the short head type. Normally the large size of material is fed into the standard type, which means that the size of discharge is also much coarse; and the small size of material is fed into the size short head type due to its steep crushing cone, which will unavoidably influence the size of discharge, and therefore it is much suitable for producing the fine goods. Consequentially, the standard type is generally used for medium and coarse material, and the short head type for medium and fine material. Features: 1. High-performance:Combining optimal designing of chamber type with applying reasonable speed and stroke, to make this kind of machine does more work with the same dynamic cone diameter. Therefore, this machine is of high-performance and manufacturing capacity compared with other cone crusher of the same type. 2. Good products size composition: The crusher applies for laminated crushing principle to make cubic shapes of final products stand for larger proportion. Acicular and flake shape products decrease and size fraction much more well-proportioned. 3. Good stability: If there is metal or other non-broken material come to the chamber, metal going through protection device will release it and then reset automatically. The protection device has fixed discharge opening returning point and the original discharge opening can returning back immediately after the metal goes through the crushing chamber. 4.Convenient Cleaning-up: If the crusher stops under loading condition, hydraulic cleaning system can clean up the crushing chamber quickly so that decrease the downtime. 5.High reliability: Adopting main shaft with big diameter£¬heavy main frame and separate automatic Control System of thin oil lubrication system, so that it guarantees robustness and reliable operation of the crusher. 6. Easy maintenance and operation: All parts can be disassembled from top and the upper side, so that fixed cone and dynamic cone can be disassembled easily. Under high shock and vibration environment, bronze Bearing can keep excellent bearing capacity and it is much more economic and easy for maintenance. 7. Low production costs: Due for big capacity, high reliability and easy maintenance, the production costs has been reduced greatly. 8. Widespread use: The specialty of PSG Series High-efficiency Spring Cone Crusher is maximizing the performance to apply to all kinds of crushing process: from special coarse crushing to fine crushing; from fixed crushing plant to mobile crushing plant. 9. Separate Lubrication: Multi-point control of an independent lubrication system ensures that the machine bearings lubricated dual protection, and can realize automatic machine security
Deutz Engine( F3L912) (1) In-line, 3Cylinder, 4 Cycle Diesel Engine (2) Air-cooled diesel engine (3) Displacement: 2.827L. Place of Origin: Shanghai China (Mainland) Brand Name: Deutz Model Number: F3L912 Usage: automobile, industrial, construction marin... Fuel: Diesel Stroke: 4 Stroke Cylinder: Multi-cylinder Cold Style: Air-cooled Start: Electric Start name: deutz F3L912 diesel engine Displacement: 2.827L Net Weight: 330kg Intakemethod: Natural aspiration combustion system: direct injection oil consumption ratio: 2.04g/kwh(limit value) fuel consumtion ratio: 240.7g/kwh(limit value) Packaging Detail: wooden case Delivery Detail within 15 days after payment In-line, 3Cylinder, 4 Cycle Diesel Engine Bore, Stroke 100mm, 120mm Displacement 2.827 Liters Compression Ration 17: 1 Cooling Way Air cooled Combustion system Direct injection Inspiration Natural intake Direction of rotation Counterclockwise(face To flywheel end) Fuel consumption ratio 240.7g/kwh(limit value) Oil consumption ratio 2.04g/kwh(limit value) Lubricant Capacity 8Liters Net Weight 330kg Overall Dimension(L, W, H) 722mm, 664mm, 814mm Useage Power class Power Speed(rpm) 1500 1800 2000 2150 2300 2500 Construction equipment ISO 3046/1(IFN) (Highly intermittent) P(kW) 26 31 34 36 38 40 P(HP) 35 42 46 49 52 54 ISO 3046/1(IFN) (Intermittent) P(kW) 25 29 32 35 36 38 P(HP) 34 39 44 48 49 52 ICFN (Continuous) P(kW) 24 28 30 32 35 P(HP) 33 38 41 44 48 Genset ICXN (Continuous) P(kW) 24 28 P(HP) 33 38 722mm, 664mm, 814mm,330KG
Product description: VSI series Sand Making machine is the latest successful new generation sand making machine with the international advanced level. After technology accumulation for many years, production of modern precision machining equipment ensures the leading position of the VSI series sand making machine in the same industry. Excellent value for money, reliability, unique in its class. Vertical Impact Shaft Impact Crusher is improved basing on latest research result of authoritative experts from Germany, and connecting with Chinese present working conditions. It is especially suitable for making qualified stone and sand for highway, high-speed railway, high building, hydropower dam construction, concrete mixing station. It is the top preferring equipment in artificial sand making and stone reshaping industry. Sand making plant Features: 1. Large processing capacity and high capacity of ideal outputs-Compared to traditional equipment in the same power, production increase 30% and working stable. 2. Low consumption of wear-resistant parts-It designs the best point of impact crushing chamber materials. 3. Fine shape of final products-The product is cube, it has good grain shape and also can adjust fineness modulus; especially it is suitable for artificial sand and stone shaping, compared to the traditional equipment, it can increase 30%. 4. Easy maintenance with hydraulic device-Hydraulic opening the lid device 5. Simple installation and easy operation-Set off alarm and vibration device, if the device happens adverse operation, it can give us a warning, then allowing devices to stop working, and to protect the machine's purpose. 6. Safe and reliable with automatic check-German original of thin oil lubrication station, to make sure the supply of the oil with double oil pump; stop working without oil or hydraulic pressure, Oil cooling and heating equipment to ensure the bearing lubrication is always at the optimum state. 7. One machine for multi-purpose, flexible application-The equipment is light weight, and varied installation. It is to install ,repair, maintain and operate. VSI sand making machine only make minor adjustments, it can maximize their outstanding performance. 8. Rare oil lubrication and automatic maintenance-Unique structure of the feed broken with a variety of crushing cavity can be very easy to achieve "a stone at stone" and "stone blacksmith" conversion, so as to solve the problem with one machine. If you want to change the VSI crusher, you don't make big adjustment, it can meet the needs of different users: artificial sand, gravel, plastic, abrasive materials, etc. 9. International quality guarantee-The latest technology of Germany, advanced technology and automotive technology riveting appearance of sand-blasting and painting process applications, greatly improve the inherent quality of equipment and appearance quality. Core components are used the world's leading brands (high-precision bearings TIMKEN bearing grade) to ensure a low failure rate. 10. Environmental protection-Sand making machine id low noise and no pollution. Unique air from the circulatory system which greatly reduces the amount of outside ventilation to reduce dust, environmentally friendly. VSI sand making machine also set aside and install a variety of specifications for dust removal equipment.
Our spraying equipment has the following types: 1)Airless spraying machine series 2)Air spraying ,static spraying equipment series 3)Thermal spraying equipment series Airless spraying equipment Model LGPQ/LQPT Heavy-duty anticorrosion and industrial high pressure cseries Airless spraying equipment, with compressed air as its power, is suitable for all places of compressed air with pneumatic or mechanical power head ,which is subdivided into vertical, wall-mounted, portable, car-style, elevation type ,and so on. 1, Spray long-term anti-corrosion paints, such as: thick paste type epoxy asphalt coatings, modified epoxy coatings, epoxy natural gas micaceous oxide iron coatings, high solids solvent-free epoxy coatings, super-epoxy paints, polyurethane paints and other new high-performance coatings; 2, Spray a variety of common coatings, such as: chlorinated rubber coatings, phenolic paints , alkyd paints, amino paints, nitro paints, acrylic paints, latex paints, architectural coatings, etc; 3, Also can be used to mine and other places with a greater gap to go along the hi-pressure transportation of fluid. Model LGPQ Airless paint sprayer series apply to ships, automobiles, railway vehicles, containers, pipes, tanks, bridges, water gates and other large components of the coating. Contrast table of pressure ratio, dimension of common model
1. ECG-1903 series of microcomputer-based industrial control instruments are precision meters for measurement of conductivity or resistivity of solution. With complete functions, stable performance, simple operation and other advantages, they are optimal instruments for industrial measurement and control. 2. The advantages of this instrument include: LCD display with back light and display of errors; automatic temperature compensation; isolated 4-20mA current output; dual relay control; adjustable delay; alarming with upper and lower thresholds; power-down memory and over ten years of data storage without backup battery. 3. According to the range of resistivity of the water sample measured, the electrode with a constant k=0.01, 0.1, 1.0 or 10 can be used by means of flow-through, immerged, flanged or pipe-based installation.
pHG-1901 industrial online PH meter is a precision meter for measurement of the PH value of solution. With complete functions, stable performance, simple operation and other advantages, they are optimal instruments for industrial measurement and control of PH value. Various PH electrodes can be used in pHG-1901 industrial online PH meter. Features LCD display, high-performance CPU chip, high-precision AD conversion technology and SMT chip technology, Multi-parameter, temperature compensation, high precision and repeatability US TI chips; 96 x 96 world-class shell; world-famous brands for 90% parts The current output and alarm relay adopt optoelectronic isolating technology, strong interference immunity and the capacity of long-distance transmission. Isolated alarming signal output, discretionary setting of upper and lower thresholds for alarming, and lagged cancellation of alarming. High-performance operational amplifier, low temperature drift; high stability and accuracy. Technical Indexes 1. Measuring range: 0~14.00pH, Resolution:0.01pH 2. Precision:0.05pH,±0.3 3. Stability:â?¤0.05pH/24h 4.Automatic temperature compensation: 0~100(pH) 5.Manual temperature compensation:0~80(pH) 6. Output signal: 4-20mA isolated protection output, dual current output 7. Communication interface:RS485(optional) 8. Control interface: ON/OFF relay output contact 9.Relay load: Maximum 240V 5A; Maximum l l5V 10A 10. Relay delay: Adjustable 11.Current output load:Max.750Ω 12. Insulation resistance:â?¥20M 13. Power supply: AC220V ±22V, 50Hz ±1Hz 14. Overall dimension: 96(length)x96(width)x110(depth)mm;dimension of the hole: 92x92mm 15. Weight: 0.6kg 16. Working condition: ambient temperature:0~60, air relative humidity:â?¤90% Except for the earth magnetic field, there is no interference of other strong magnetic field around. Standard configuration One secondary meter, the mounting sheath of immerged (selection), one PH electrode, three packs of standard Ordering guide: 1. To inform whether the electrode provided is a dual or ternary complex. 2. To inform the length of the electrode cable (default as 5m). 3. To inform the installation type of the electrode: flow-through, immerged, flanged or pipe-based
Anatase Titanium Dioxide Advice: Not recommended for exterior(weather exposed)applications. BT-A11 A general grade suitable for masterbatch filling/rubber/plastic, printing ink, interior paints, highway marking paints, filling of paper and etc. Content% 98.0min Water soluble 0.5min PH Value 6.5-8.5 Oil Absorption(g/ 100g ) 26min Packing: 25kgs/bag BT-A10 Specialized in interior paints, printing ink, highway marking paints. Content% 98.0min Water soluble 0.5min PH Value 6.0-8.5 Oil Absorption(g/ 100g ) 22min Packing: 25kgs/bag BT-A12 Specialized in rubber/ plastic/ masterbatch filling. Content% 98.0min Water solube 0.5min PH Value 6.0-8.5 Oil Absorption(g/ 100g ) 22min Packing: 25kgs/bag
This series products are based on special high density homogenous copper alloy. The inner surface is rolled to diamond or half-ball shape lubrication grooves. They are in high density, good load capacity and wear-resistant. The products are widely used in machinery industry, such as auto machines, pumps, plastic injection machines, lifting equipments, mining machinery, construction machines, etc. Features: 1.Minim oil lubrication, able to be applied in water-lubrication environment 2.Good anti-abrasion, low friction coefficient 3.Working temperature range: -100oC~+200oC Specifications: Max. dynamic loading capacity : 40N/mm2 Max. static loading capacity : 120N/mm2 Max. linear speed : 2m/s Friction coefficient : 0.08~0.25 Hardness : HB110~150 Yieid Strength : 250N/mm2. Standard export package.
- ALLEN KEYS - AXES - CAR JACK AND CAR STANDS - COMBINATION TYRE TOOLS - CUTTERS AND BLADES - DR. SOCKETS AND SOCKET SETS - GAS TORCH BURNERS - GREASE GUNS (LEVER TYPE) - HAMMERS - HEX BIT SOCKET SETS - HEX WRENCHS - IMPACTS SCREWDRIVERS - IMPACT SOCKETS - LETTER PUNCH SETS - LINESMAN PLIERS - OIL FILTER WRENCHES - PIPE CUTTERS - PISTON RING COMPRESSORS - PUMPS FOR BARRELS - RATCHETS - SCREWDRIVER SETS - SCREWDRIVERS - SIDE CUTTERS - SLEDGEHAMMERS - SOCKET ADAPTOR - TAPE MEASURES - TOOL KITS - TORQUE MULTIPLIERS - WRENCHES
FB08G is a kind of bushes wrapped by bronze strip. The bronze is of particular formulation with high specific gravity and on its surface may be incorporated with spherical of diamond shaped indentations or oil grooves as required by customers. It is of high load capacity and long life. In place of traditional bronze bush, it is more cheap and more compact. It is widely applied in hoisting machines and other construction machines, automobiles, tractors, trucks, machine tools and some mineral engines. Base material: CuSn8P0.3 Hardness: HB90~120 Load capacity: 75N/mm2 Temperature: -80~200¡ãC Speed limit: 2.5m/s PV limit (Oil): 16N/mm2. m/s. Standard export package.
Features: * great crushing ration and high production efficiency. * between-layer crushing and more uniform size fraction of end products. * lower wear parts consumption and operation cost. * primary and fine crushing can be achievable just by replacing fixed cone. * advanced hydraulic technologies realize overload protection and hydraulic adjusting discharge opening, simplify crusher structure and lessen its weight. * reliable and advanced thin oil lubrication extends service life. * simple maintenance and convenient operation.
Diesel generator Generator set model jld6500/ jld6500s Generatorrated frequencyhz5060 Rated voltagev230240/120 Rated currenta19.620.8/41.7 Maximun power (kw)5.05.5 Rated powerkw4.55.0 Dc output12v/8.3a Power factor 1.0 Phase number single phase Continuous operating hours12 Noise level[db(a)/7m]m/e :72, s: 69 Engineengine modelss186f Engine typesingle-cylinder, 4-stroke, forced air-cooled, direct injection, diesel engine Rated rotation speed(rpm)30003600 Rated power [kw(hp)]6.4(8.8)7(9.5) Displacement(ml)406 Compression ratio 20:1 Structurestructurem/e:open-frame type s:silent type Overall dimension (lf-wf-h)[mm(inch)]m/e:750f-560f-620(29.53f-22.05f-24.41) S:935f-560f-720(36.81f-22.05f-28.34) Dry weight(kg)m/e:98, s:157 Starting systemm:manual starting e/s:electric starter Rotation direction(view from flywheet)clockwise Fuel0#(summer), -10#(winter) light diesel oil Fuel tank capacity(l)15 Lubrication oil sae10w30(above cc grade) Lubrication oil capacity(l)1.65 Low oil pressure alert system
1. Advantage * Economical type, money saving, * Short term outdoor using. 1~1.5years * Soft film, good uneven holding ability Specification: Vinyl thickness Liner Width Length INK 80 micron 120g/m2 paper 0.914/ 1.06/1.27/1.37/1.52m 50m Solvent, eco, UV 2. Use area HK102 is intended for making graphics in the following area * Body of car, bus, truck, subway sign graphics * Flat wall body * Other flat substrates such as foam board, banner sheet 3. Limitation This type is not recommended for the following applications: * High substrates light block area * Dirty, solvent cleaned, grease, silicon coating which affect the adhesion of the glue. * Lacquered or painted surfaces freshly. The dried lacquered must be tested by user for compatibility 4. Temperature ranges Minimum application temperature > 9XC Service temperature range - 15XC to~ 70XC 5. Shelf life: 1 year in material's original packaging, storage temperature of 15-22 deg C. (80-100)um*(0.914,1.06,1.27,1.37,1.52)m*50m/roll.