Matte Premium Latex at the best Performance of durability tests in any walls, woods and few metals as well. An adventurous Range to sustain the sheen level and coverage of solvent based products. Adding value to extra coverage, low voc, non yellowing, acrylic features, water dilution and more. A Regent Hi Performance and durable product. Matte finish is an Acrylic copolymer based, washable interior/exterior emulsion paint with a smooth flat decorative finish. It offers excellent adhesion and recoat ability. It is with better hiding power and exceptional light and weather resistance. USES A Matte - gloss finish, acrylic resin emulsion formulated to protect and beautify interior surfaces. Excellent for masonary (concrete, cement block, cinder block), wall board, stone, brick, and wood. May also be used on properly primed steel.
HI GLOSS LATEX Hi - Gloss Latex the Glamorous - interior is Latex Acrylic copolymer based Premium Latex-emulsion paint. A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc. USES Regent Paints Hi - Gloss Latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints Hi-Gloss Latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Hi - Gloss Latex. PROPERTIES Colour : Full range - as per shade card Finish : Hi-Gloss Solids(Volume) : 52% and above Specific Gravity : 1.27 +/- 0.1 Theoretical Coverage : 250 â?? 400 sq. ft. per gallon DRYING TIME :â?? AT 25 �° T Touch Dry : 2 hours To Recoat : 4 hours Vehicle Type : Acrylic Copolymer
GULF TEX Gulf tex heavy texture is water borne acrylic heavily textured coating based on modified styrene emulsion with aggregates ( Mica chips), which provide special pattern on the wall, woods suited for the all climatic condition. PROPERTIES Colour : As per shade card Finish : Texture finish Consistency: Thixotropic Solids: 65 % ± 3 % Specific gravity: 1.70 ± 0.05 Theoretical Coverage 1 -2 m2/ltr DRYING TIME : AT 25 To handle: 4 hours To Recoat: overnight Number of coats: 1 Application by: Roller for heavy tex or Hooper spray
WOOD STAIN Interior alkyd oil based woods stain that protects and enhances the natural texture of fine wood. PROPERTIES Colour : As per cards of colour Solids: 35% Theoretical Coverage â??15m2/lt depends of surface Viscosity : 80 sec ( Ford cup No.4) Flash Point: 40 �° C DRYING TIME â?? AT 25 �° To touch: 6 hours To Recoat: 12 hours Specific gravity: 0.89 Solvent: White spirit
TEX PRIMER WHITE Tollens Tex primer is an acrylic co-polymer primer with very fine aggregates, specially designed for priming masonry surfaces for all water based textured paints PROPERTIES Colour : White Solids: 45% +/- 2% Theoretical Coverage 9 -10 m2 Recommended film thickness: dry 30u wet 80u DRYING TIME â?? AT 25 �° To touch: 1 hour To Recoat: Min. 5 hours Vehicle type: acrylic co-polymer Specific gravity: 1.55
Epoxy Primer Grey is a two pack polyamide cured primer generally used for epoxy system on masonry surface and cement works. PROPERTIES Colour : Grey Finish : Matt Theoretical Coverage 6-7 m2/lit on masonry surface Spreading rate is theoretically calculated and can be effected by substrate preparation thinning and methods of application. Solids (volume) : 24�±2% Curing time : 3-6 hours at 25 �° C Full cure : 7 days Flash point : 25 �° C (ISO 367 â??83) Specific gravity : 1.00 when mixed A+B Pot life : 4 hours at 25 �° C Mixing ratio : 4 parts base"A" : 1 part hardner "B" Solvent : Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life. Normally Tollens Epoxy primer grey A+B mixing pot life is 4hrs.As a diluent use Tollens Epoxy thinner 15 â?? 25 %.
Shipping : Support Sea freight Payments:This supplier also supports L/C payments. Quick Details CAS No.: Acrylic Emulsion EINECS No.: Acrylic Emulsion Main Raw Material: emlusion Application Method: Brush Brand Name: REGENT HIGH GLOSS EMULSION MF: Acrylic Emulsion Place of Origin: GBA-Alderney Usage : used for water-based ink and pverprint varnish production State : Emulsion Model Number: : REGENT HIGH GLOSS EMULSION
100 Gallon/Gallons (Min. Order) Payments:This supplier also supports L/C,T/T,Western Union payments. Quick Details lace of Origin: United Arab Emirates Usage: Building Coating, Texture Paint for interiors and exterior State: Alkyd Model Number: Regent high gloss enamel Premium Main Raw Material: Acrylic Application Method: Brush Brand Name: Regent Paints Supply Ability Supply Ability: 20000 Gallon/Gallons per Day Packaging & Delivery Port Jebel Ali Lead Time : As per your Requirement
>=100 Gallons US$11.50 Payments:This supplier also supports L/C,T/T,Western Union payments. Place of Origin: United Arab Emirates Main Raw Material :Acrylic Usage : Building Coating, Texture Paint for Exterior and Interior State: : Liquid Coating A Signature Product defining your value and the feel on the walls of your hones and offices. The sheen, the durability, the coverages impart the most outrageous range to your access. Velvet Acrylic Emulsion is an environmentally friendly acrylic emulsion based interior decorative coating designed for velvet effects and to simulate a prestigious architectural appearance to the surface. It offers excellent adhesion and an easy to clean coating. Colour: Full range as per shade card Finish: Pearlescent-Satin Vehicle Type: Acrylic Solids( volume) : 42 ± 2% Specific gravity: 1.03 ± 0.05 Theoretical Coverage: 260 - 400 sq. ft. per gallonMetal drums one US gallon, 5 US gallon, 20 litres, 20 kg, 25 kg and 1000 Litres Totes Bulk Buying: 1 Totes = 264 Gallons 1 Barrel = 55 Gallons Bulk Shipping: We ship containers. And It will accommodate 1 container of 20 feet = 80 barrels 1 container of 20 feet = 18 totes Application Method :Brush Brand Name : Regent Paints Supply Ability Supply Ability: 20000 Liter/Liters per Day Packaging & Delivery Packaging Details 1 ltr , 4 ltrs , 20 ltrs , 20 KG , 25 KG , 1000 ltrs 1 US Gallon, 5 US Gallon Port : Jebel Ali Lead Time : 1 week
>=100 Gallons US$ 6.50 Payments:This supplier also supports L/C,T/T,Western Union payments.
Payments:This supplier also supports L/C,T/T,Western Union payments.
>=100 Gallons US$11.50 Shipping: Support Sea freight Payments:This supplier also supports L/C,T/T,Western Union payments. Place of Origin: United Arab Emirates Usage: Building Coating, Wall Coating State: LIQUID Model Number: High gloss enamel alkyd Main Raw Material: ALKYD Application Method: Brush Brand Name: High gloss enamel alkyd BULK AND RETAIL: ALL COLOR Port Jebel Ali Lead Time : As per your requirements Main Raw Material ALKYD Application Method Brush State LIQUID Packaging & Shipping We ship 20 feet containers. It will accommodate 1 US gallon x 4000 CANS 5 US gallon x 950 buckets 1000 liters x 18 Totes Please note- The Above Shipping details is without pallets, with pallets the material will be reduced by 15%.
Place of Origin: United Arab Emirates Usage: Building Coating, Rubber Coating Main Raw Material: bitumen
US$1.00 - US$2.20 / Kilogram | 5 Kilogram/Kilograms (Min. Order) Payments:This supplier also supports L/C payments. Quick Details Place of Origin: GBA-Alderney Usage: Building Coating State: Emulsion Model Number: REGENT GYPSM PUTTY Main Raw Material: GYPSM PUTTY Main Raw Material: GYPSM PUTTY Brand Name: REGENT GYPSM PUTTY Supply Ability Supply Ability: 20000 Ton/Tons per Year Packaging & Delivery Port Jebel Ali Lead Time : As per your Requirement Product DescriptionSpecially designed Gypsum putty for decoration purpose for gypsum board joint, which provides excellent adhesion to the surface, modified water borne acrylic emulsion Description: Mostly using in interior decoration purpose on concrete Gypsum board, walls, woods, plaster etc Properties: Colour: White Finish: Smooth Solids: 70% Specific gravity: 1.65 +/- 0.03 Theoretical Coverage: 2 �¢??3 m2/ltr Drying time : At 25 To handle: �½ hour To Recoat: Over night Number of coats: 1 Precautions: Keep from freezing, contains water. May cause eye , nose, and throat and skin irritation. Keep out of the reach of children Packing: Metal drums one US gallon, 5 US gallons Category: Emulsion. Tags: gypsm putty, putty. Place of Origin: Alderney Main Raw Material: Gypsm putty Packaging & Shipping In 25kg paper bags inner with PE bags Bulk Shipping: We ship 20 feet containers. It will accommodate 1 US gallon x 4000 CANS 5 US gallon x 950 buckets 1000 liters x 18 Totes Please note- The Above Shipping details is without pallets, with pallets the material will be reduced by 15%.
CONTRACTOR LATEX A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc. USES Regent Paints contractor latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints contractor latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Velvet. ROPERTIES Colour : Full range - as per shade card Finish : Matt Solids(Volume) : 52% and above Specific Gravity : 1.40 +/- 0.1 Theoretical Coverage : 250 - 400 sq. ft. per gallon DRYING TIME AT 25 T Touch Dry : 2 hours To Recoat : 4 hours Vehicle Type : Acrylic copolymer
STUCCO PUTTY A heavy pigmented and highly thixotropic acrylic wall filler, having excellent adherence to the wall and good durability. PROPERTIES Colour : White Finish : Matt Solids: 70% +/- 2% Specific gravity: 1.7 +/- 0.03 Theoretical Coverage 5-8 m2/ltr depends of surface DRYING TIME â?? AT 25 �° To touch: 1/2 hour To Recoat: 1 hours Number of coats: 1-2
ACRYLIC THINNER IT is a blend of Alcoholâ??s, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings. PROPERTIES Colour : Crystal Clear Odor : Characteristic Non - volatile matter : Nil S.g kg/l: 0.850�±0.05 Flash Point (ASTM D93) Not less than 12 �°C Description Review
G P THINNER It is a blend of Alcohol's, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings. PROPERTIES Colour : Crystal Clear Odor: Characteristic Non-volatile matter : NIL S.g kg/l :0.850�±0.05 Flash Point (ASTM D93): Not less than 12 �°C
MICRO TEX Micro tex is a textured coating containing quartz, based on modified Acrylic emulsion, will give a flexible finish with medium textured, PROPERTIES Colour : As per shade card Finish : Light texture finish Consistency: Thixotropic Solids: 50 % +/- 2 % Specific gravity: 1.55 Theoretical Coverage 2.5 â??3.5 m 2/ ltr DRYING TIME : AT 25 �° To handle: 3-4 hours To Recoat: overnight Number of coats: 1 -2 Application by: Roller or brush Description Review It is suitable for exterior and interior surfaces of cement plaster, concrete, bricks, masonry, asbestos cement panels and suitably primed wood. Magnum helps to conceal any small unevenness and indents in the surface. APPLICATIONS: Surface should be clean and dry, before the application of medium Tex. For the fresh concrete Tollens Tex primer should be used as a primer on new surfaces. SURFACE PREPARATION: Surface must be clean and free of, chalk, dust, and other contaminants. Clear the surface with wire brush, remove any loose adherence PRECAUTIONS: Keep from freezing, contains water. Using at temperatures above 4ï?°C May cause eye, nose, and throat and skin irritation. Keep out of the reach of children PACKING: Metal drums one US gallon, 5 US gallons
It is a mixture of aromatic Hydrocarbon, esters, ketone. It is recommended for Polyurethane varnishes due to its average evaporation PROPERTIES CHARACTERISTICS APPEARANCE COLOR TRANSPARENT LIQUID Specific Gravity ASTM D 3505 0.85 �±.02 Kg. / lit. Colour (Saybolt) ASTM D 1209 +30 Initial Boiling Point ASTM D 850 112�° C Copper Corrosion ASTM D 849 None Non â?? Aromatics ASTM D 2360 40 â?? 50% Flash Point (Abel) IP 170 24 �° C PRECAUTIONS: Contents are Combustible. May cause eye, nose, and throat and skin irritation. Keep out of the reach of children PACKING: Do not use in tank or pit without proper protection Metal drums one lit. 1US gallon, and 5 US gallons
