Mono Coat Egg Shell Latex - interior is Latex Acrylic copolymer based Premium Latex - emulsion paint A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc. USES Regent Paints Mono Coat Egg Shell Latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints Mono Coat Egg Shell Latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Mono Coat Egg Shell Latex. PROPERTIES Colour : Full range - as per shade card Finish : Egg Shell Solids(Volume) : 52% and above Specific Gravity : 1.27 +/- 0.1 Theoretical Coverage : 350 â?? 450 sq. ft. per gallon DRYING TIME :â?? AT 25 �° T Touch Dry : 2 hours To Recoat : 4 hours Vehicle Type : Acrylic Copolymer
ACRYLIC TOP COAT it is an acrylic resin based premium top coat for metals. It has exceptional color and gloss retention in a variety of climatic condition. PROPERTIES Colour : full range Solids: 38 + 2 % Theoretical Coverage 9 â??12 m2/Lit Recommended (Dft) : 30 - 40 Microns/ per coat Recommended (Wft) : 90-100 Microns/ per coat DRYING TIME â?? AT 25 �° Surface Dry: 5-10 mins To Recoat: 3 â?? 4 hours Vehicle type: Modified alkyd Specific gravity: 1.15 �±0.05 (depends on color)
WOOD PRIMER Specially formulated alkyd base wood primer for interior and exterior use. May be used under topcoats such as alkyds,oils,or latex paints. PROPERTIES Colour : White -pinkish Solids: 45% Theoretical Coverage 8 - 10 m2/lit DRYING TIME : AT 25 To handle: 2 hours To Recoat: 24 hours Vehicle type: Modified alkyd Specific gravity: 1.40 Flash point: 35C
Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents. PROPERTIES Colour : black Solids : 70 ± 2% Specific gravity 1.40 at 25 C Theoretical Coverage 3 5 m2/lit (@ 70u M) DRYING TIME : AT 25 T To touch: 15 min To Recoat: 2 hours Max.overcoat interval: Not applicable Vehicle type: bitumen coal tar Flash Point: 35C. Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10C - +70 C
solvent based fire retardant paint, based on special resins and Chemicals. The dried film gives good resistance against fire and Protection to base substrate. RECOMMENDED USES As fire retardant topcoat paint on wood, steel and concrete surface. At recommended thickness it has excellent fire retardant properties. ADVANTAGES One component special resin based paint, easy to apply, excellent water, weather and U.V. resistance. Dry film has excellent fire retardant properties
High quality decorative alkyd enamel for use as topcoat on alkyd primers or undercoat. PROPERTIES Colour : Aluminium Solids : 40% Theoretical Coverage 10 â??12 m2/lit @ 25u DFT DRYING TIME :â?? AT 25 �° T To handle: 4 hours To Recoat: 24 hours Vehicle type: Modified alkyd Specific gravity: 1.0 +/- 2% Flash point: 38�°C
Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents. PROPERTIES Colour : black Solids : 70 �± 2% Specific gravity 1.40 at 25�° C Theoretical Coverage 3 â?? 5 m2/lit (@ 70u M) DRYING TIME :â?? AT 25 �° T To touch: 15 min To Recoat: 2 hours Max.overcoat interval: Not applicable Vehicle type: bitumen â??coal tar Flash Point: 35�° C. Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10�° C - +70�° C
DECORTEX D�©cor tex is water borne acrylic texture based on modified styrene emulsion with aggregates, which provide special pattern on the wall, woods suited for all climatic condition PROPERTIES Colour : As per shade card Finish : Texture finish Consistency: Thixotropic Solids: 65 % �± 3 % Specific gravity: 1.70 �± 0.05 Theoretical Coverage 1 -2 m2/ltr DRYING TIME :â?? AT 25 �° T To handle: 4 hours To Recoat: overnight Number of coats: 1 Application by: Roller for heavy tex or Hooper spray
Epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor. PROPERTIES Colour : Available in pastel and dark shades Finish : High gloss/Egg Shell Theoretical Coverage 7-8 m2/ lit Curing time: 15 â??20 hours at 25�° C Full cure: 7 days Flash point 22�°C (ISO 367 â??83) Specific gravity: 1.35+.05 when mixed A+B Pot life: 8 hours at 25�° C Mixing ratio: 4 parts baseâ??Aâ?? : 1 part hardner â??Bâ?? Solvent: Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
Multi-purpose bitumen coal tar emulsion. PROPERTIES Gloss level: matt (ISO 2813-78) Solids: 25% (+/- 2 %) Viscosity: 22000 cps @25 �°C Brookfield 4/4) Theoretical Coverage 1 â?? 1, 5 m2/lit (@ 40u) DRYING TIME â?? AT 25 �° To touch: 1 hour To Recoat: 24 hours Max.overcoat interval: Not applicable Vehicle type: bitumen â??coal tar Specific gravity: 1.03 (+/- 2%) Flash point: Inflammable liquid.
High quality alkyd enamel white for use on all wood, metal or masonry surfaces. This product is extremely durable with excellent flow and leveling characteristics. PROPERTIES Colour : Milky white Solids : 55�±2 % Theoretical Coverage: 10 â??12 m2/Lit DRYING TIME : â?? AT 25�° To handle: 4 â??6 hours To Recoat: 8 - 12 hours Vehicle type: Modified alkyd Specific gravity: 1.10 �±0.02%(depends on color) Viscosity : 95�±15 second in Ford Cup No.4 Flash point: 37�°C
Tollens epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor. PROPERTIES Colour : Available in pastel and dark shades Finish : High gloss/Egg Shell Theoretical Coverage 8 m2/ lit Curing time: 15 - 20 hours at 25 C Full cure: 7 days Flash point 22C (ISO 367 - 83) Specific gravity: 1.35 when mixed A+B Pot life: 8 hours at 25�¯ Mixing ratio: 4 parts base A: 1 part hardner B Solvent: Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
Specify the product as moisture-proofing membrane for building foundations, industrial flooring applications and roofing general insulation. PROPERTIES Gloss level : Matt (ISO 2813-78) Solids : 25% (+/- 2 %) Viscosity : 22000 cps @25ï?°C Brookfield 4/4) Theoretical Coverage: 1 â?? 1, 5 m2/lit (@ 40ï?Â)
A two pack high build epoxy Polyamide based under coat containing inert pigments. It is recommended as a final coat in an Epoxy system CHARACTERISTICS High build in single coat. Excellent resistance to fresh and salt water Abrasion resistance and flexible films. Excellent inter-coat adhesion. Resistant to solvents. Resistance to mild acids. USES Coating for long term protection for structural steel, concrete surface and internal lining of edible oil tanks, and fuel tanks. Suitable for marine installations, power plants, fertilizers, hospitals, laboratories, etc.
Paints, paints in bulk, latex paints, hi gloss enamels, alkyd enamels, semi gloss, silk paints, exterior paints, interior paints, texture paints, primer paints, red oxide paints, paint raw materials, universal stainers, colorants, tintors, emulsions, distempers, binders, alkyds, solvents, resins.
Medical, Ppe, Scrap, Euro Wooden Pallet, Cement, Oil Gas .
Key Features â?¢ NIOSH approved N95 rating â?¢ Adjustable nose clip â?¢ Nose foam â?¢ Ultrasonically welded headbands Material Composition â?¢ Straps Thermoplastic Elastomer â?¢ Nose Clip Aluminum â?¢ Nose foam - Polyurethane â?¢ Filter Polypropylene â?¢ Shell Polyester â?¢ Coverweb - Polyester â?¢ This respirator contains no components made from natural rubber latex â?¢ Approximate weight of product: 0.35 oz. Country of Origin Made in the USA with globally sourced materials Use For â?¢ Use for solid particulates and liquid mists in concentrations not exceeding 10X PEL/OEL â?¢ Always follow User Instructions and use in manners as indicated Do Not Use For â?¢ DO NOT use for gases and vapors, oil aerosols, asbestos, arsenic, cadmium, lead, 4,4-methylene dianiline (MDA), or abrasive blasting â?¢ DO NOT use for particulate concentrations exceeding 10X PEL/OEL â?¢ DO NOT use in any manner not indicated in the User Instructions Approvals and Standards â?¢ NIOSH approved N95 particulate respirator â?¢ Meets NIOSH 42 CFR 84 N95 requirements for a minimum 95% filtration efficiency against solid and liquid aerosols that do not contain oil. â?¢ NIOSH approval number: TC-84A-0007 â?¢ Assigned Protection Factor (APF 10) per US OSHA and Canada CSA
Promotional Non-Woven Cooler Bag,Promotional Non-Woven Cooler Bag Supplier And Wholesaler,Non-Woven Cooler Bag TC11137 Lunch box-shaped Non-Woven Cooler Bag with front pocket in 80GSM non-woven laminate and foil insulation for hot or cold take out meals, bakery items or picnic and sporting events. Insulated bag keeps your lunch & drinks fresh and cool. Features insulated thermo lining, a zipper closure, front pocket and a convenient handle strap. Foam insulated with lead free aluminum lining. 8" W x 6" D x 6" H Quantity: 1000 2000 3000 Your Price(each)$: 5.31 5.15 4.14 Additional charges may apply. Colors Royal Blue, Red, Lime Green, Black Themes Household, Outdoor Imprint Information Silk Screen, Price include 1 color 1 location imprint Delivery Information 25days for production, 5-7 days for shipping by air, 22-25 days for shipping by ocean We can product kind of promotional non woven tote bag such as non-woven cool tote bag, neoprene cooler bag, insulated cooler lunch tote bag and so on. Are you looking for Promotional Bag wholesaler, disposable paper cup, dual pocket drawstring backpack or other Promotion items? Free samples, free shipping and free e-proof upon request can we provide, we will be your best choice! If you want to know more, please click here.
We can provide small aircraft and their component parts. --
Jet fuel Barrel
