Product id: gp-640r The powerful plastic crusher is major for crushing the various runners, sprues and defected products from plastic injection molding machine. Feature: 1. Strong structure designed body. 2. Faster cutter replacement, easy cleaning allows rapid screen changing. 3. Size of crushed granules adjustable depends on screen changed. (from o2, o3... O15mm) 4. Rotor knives with exceptional eggiciency cutting angle designed that with least vibration and 5. Minimized powder yield. 6. Built-in emergency safety switch, allows automatic stopping, when hopper and screen base is being opened. 7. Special designs made to order for meeting clients need. 8. Oem/odm product 9. Branded product 10. Buyer's label offered
High Brightness Display (Sunlight Readable Screen) Inch : 5.7 ~ 27 Resolution : 320x240 ~ 1920x1080 Brightness : 570~1,000 nits Panel Interface : TTL / LVDS / eDP High brightness displays differ from the brightness of traditional panels. It allows the user to see the display under strong sunlight or under direct light source which enables operation under special conditions in industries such as military operation, transportation industries, outdoor digital signage, and medical sectors. We possess years of experiences in high brightness display technology which enable us to deliver customization services to high brightness display customers. Our customization service : 5.7 ~ 31.5 inch panel size for selection. Customized LED Lightbar. Extent LED Lightbar life time. Improve brightness for thin panels design services. Optimization heat dissipation solution. Our backlight design services includes light guide films, plastic housing, metallic housing., and etc. We provide customization services for touch panel integration and optical bonding.
SiRF V GPS Module GPS Engine Board with MCX/SMA connector Ct-G340 w/Ct-G530P The Ct-G340 w/Ct-G530P module is high performance, low power GNSS receiver, based on the SiRFStarV single chipset technology while providing fast time-to -first-fix. Its far reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications. Ct-G340 w/Ct-G530P is designed to allow quick and easy integration into GPS-related applications, especially for compact size devices, such as: - Fleet Management / Asset Tracking - AVL and Location-Based Services Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - 52 track verification channels - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - RF Metal Shield for best performance in noisy environments - High sensitivity navigation engine (PVT) tracks as low as - GPS: -165dB, - GLONASS: -161dBm - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Tracks up to 8 CW jammers - Enbedded CGEE/SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high performance features of the SiRFstarVâ?¢ low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) -
This mobile phone detection system consists of two sensor poles (Dipole). Each pole has six equally spaced sensors connected to a micro-controller. Detected data are spontaneously wireless transmitted to a Main Controller. Data are further analyzed by the main controller to determine if a mobile phone has passed through these Dipole. When a person walk through the Dipole with a mobile phone, signal strength (above the background noise level) of each detector is displayed on Main Controller's LED panel instantaneously with respect to its position. In the mean time, main controller will sound alarm, active dry contact, or establish wireless or TCP/IP communication with a remote computer depends on customer's preference. Dipole is very lightweight and easy to set up. Since it is a reactive system, dipole does not generate any harmful strong RF driver signal. Dipole and the main Controller consume very low power suitable for non-stop operation. System does not need any operator to monitor like a metal detector. Moreover, Upgraded Idle Standby Phone Walk Through Detector RFD-10PL (TCP/IP Plus) can work with one or multiple IP cameras for remote monitoring and warning. When someone with a phone walks through RFD-10PL cell phone door detector, you will get sound and image alerts quickly. A photo capture pops up to show you who has a phone on our software interface. IP camera's address and time stamp also on the photo. Only the detected photos are stored in the recorded files so you can efficiently find out who have phones without replaying all recorded videos of the IP cameras.
This mobile phone detection system consists of two sensor poles (Dipole). Each pole has six equally spaced sensors connected to a micro-controller. Detected data are spontaneously wireless transmitted to a Main Controller. Data are further analyzed by the main controller to determine if a mobile phone has passed through these Dipole. When a person walk through the Dipole with a mobile phone, signal strength (above the background noise level) of each detector is displayed on Main Controller's LED panel instantaneously with respect to its position. In the mean time, main controller will sound alarm, active dry contact, or establish wireless or TCP/IP communication with a remote computer depends on customer's preference. Dipole is very lightweight and easy to set up. Since it is a reactive system, dipole does not generate any harmful strong RF driver signal. Dipole and the main Controller consume very low power suitable for non-stop operation. System does not need any operator to monitor like a metal detector. Moreover, Upgraded Idle Standby Phone Walk Through Detector RFD-10PL (TCP/IP Plus) can work with one or multiple IP cameras for remote monitoring and warning. When someone with a phone walks through RFD-10PL cell phone door detector, you will get sound and image alerts quickly. A photo capture pops up to show you who has a phone on our software interface. IP camera's address and time stamp also on the photo. Only the detected photos are stored in the recorded files so you can efficiently find out who have phones without replaying all recorded videos of the IP cameras.
LR9150 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance * GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy * High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm * 52 track verification chann els * SBAS (WAAS or EGNOS,MSAS) * Active Jammer Remover, removes in-band jammers up to 80 dB-Hz * Tracks up to 8 CW jammers * Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. * Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. * SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. * Reacquisition Time : 0.1 second * RF Metal Shield for best performance in noisy environments Hardware and Software * Based on the high performance features of the SiRFstarV low power single core logic. * Adaptive micropower controller * Only 50 to 500�¼A maintains hot start capability (core logic) * < 10mW required for TricklePower mode * RoHS compliant (lead-free) * SMT pads allow fully automatic assembly processes equipment and reflow soldering * Advanced navigation features * Smart sensor supported by I�²C interface * External interrupt input for context change detection Advantages * Built-in LNA. * Built-in internal ROM and based on Firmware 5.5.X * It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. * Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) * Support SiRFaware technology * Support adaptive Micro Power Controller power management mode. * < 10mW TricklePower, so user can leave power on all day instead of power off. * Suitable for battery drive devices that need lower power consumption application * Cost saving through elimination of RF and board to board digital connectors * Flexible and cost effective hardware design for different application
Features: - SiRF Star V ultra low power chipset - GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy - Compact module size for easy integration : 15 x 14 x 2.8 mm The Ct-G551 GPS module is a high sensitivity, low power, Surface Mount Device (SMD) that fully utilized SiRFstarV upgraded features. This 48-channel Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) receiver is designed for a wide range of OEM applications and is based on the GPS signal search capabilities of the SiRFstarV CSRG05e ROM chipset, Sirf's newest chipset technology. The Ct-G551 provides flexible bus interfaces (UART). The Ct-G551 is designed to allow quick and easy integration into GPS-related applications such as: -Mobile gaming -Cellular handsets -Cameras -Asset tracking -Other location-aware consumer devices Premium on-chip software provides a new level of continuous location awareness by employing -Opportunistic ephemeris decode and advanced power management, which enable the GPS receiver to stay in a hot-start condition nearly continuously while consuming very little power -Full support for client-based and server-based SiRFInstantFixTM -Dynamic contextual awareness, temperature monitoring, and MEMS sensors that work in concert to conserve power and boost performance -Use of software control modules to achieve power saving state SiRF V GPS Module Features Performance -Highest performance Solution: -GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy -High sensitivity navigation engine (PVT) tracks as low as - GPS:-164dBm - GLONASS:-161dBm -48 track verification channels -SBAS (WAAS or EGNOS,MSAS) -Active Jammer Remover: -Removes in-band jammers up to 80 dB-Hz -Tracks up to 8 CW jammers -Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted)-Need operator support -Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. -SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. -Reacquisition Time: 0.1 second -RF Metal Shield for best performance in noisy environments Hardware and Software -Based on the high performance features of the SiRF Star V low power single chipset. -Adaptive Micropower Controller: -Only 50 to 500gA maintains hot start capability -
The DS-354 utilized SiRFstarV â?¢ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance â?¢ GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy â?¢ High sensitivity navigation engine (PVT) tracks as low as GPS : -165dBm, GLONASS : - 161dBm â?¢ 52 track verification channels â?¢ SBAS (WAAS or EGNOS,MSAS) â?¢ Active Jammer Remover, removes in-band jammers up to 80 dB-Hz â?¢ Tracks up to 8 CW jammers â?¢ Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) â?? Need operator support â?¢ Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. â?¢ SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. â?¢ Reacquisition Time: 0.1 second â?¢ RF Metal Shield for best performance in noisy environments Hardware and Software â?¢ Based on the high performance features of SiRFstarVâ?¢ low power single core logic. â?¢ Adaptive micropower controller â?¢ Only 50 to 500�¼A maintains hot start capability (core logic) â?¢ < 10mW required for TricklePowerâ?¢ mode â?¢ RoHS compliant (lead-free) â?¢ Advanced navigation features â?¢ Smart sensor supported by I�²C interface â?¢ External interrupt input for context change detection â?¢ MMCX RF Connector â?¢ Dimension : 36 x 24 x 10.5 mm
The primary use of iron ore is in the production of iron. Most of the iron produced is then used to make steel.
Used in the production of electrical conductors, switches, transformers, and telecommunications.
Available in 12ft to 100ft 24ft: Plug in Battery timer: 6 hours on, 18 hours off Steady, flash, fade functions (battery only) Colors: Warm White / Cool White / Red / Blue / Green / Multi-color / Color Changing Solar potential
Chemical Composition: al Weight: 20/25kg Al (Min): 99%-99.9% Appearance: silvery white Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth. Applications: 1. mainly used for melting ingot 2. discontinuous melting with scrap 3. easy control and operation 4. fast melting 5. Used for industry such as automobile,pinning and weaving,electron broadly and so on
Stainless Steel Machine Screws Stainless Steel Pan Head Stainless Steel Flat Head Stainless Steel Oval Head Stainless Steel Truss Head Stainless Steel Phillips & Slotted Military Specs accepted based on Client Technical drawing
Stainless steel wire.Manufacturer
Stainless steel screws.
Stainless steel sheet, coil, pipe, tube, acrylic sheet.Manufacturing
Plastic injection moulding, metal or plastic accessories, electronic components like wire harness, connector, pcb, safety security lock, air freshener, auto accessories, mat for car, truck, boat, mount/holder for vehicles, office, health car, entertainment.Transportation, shipment, international purchase operation.
Engineering plastic material and stainless steel sheet off grade, tail and head sheet.
Various valves: ball valve, gate valve, check valve, butterfly valve, water hammer arrrester.
Batteries, button cells, alkaline batteries, lithium battery packs.
