Place of Origin Taiwan/China Material Polycrystalline&Monocrystalline Silicon Size 125mm x 125mm(Mono) & 156mm x 156mm (Multi&Mono) 100/PCS for a Box, 10 Boxes for a Carton
Hand-crank Taped Axial Lead Former (S Type --- Slim, narrow shoulder and small pitch) > > Product No. : RT-80S RT-80S FEATURES RT-80S, Lead Former targets for smaller pitch component. Changeovers and setups are simple and fast. Thank to no tooling required pitch and lead length adjustment. Never damage components leads or body. Lead-supporter device ( Pressure relief) : When bending the components leads, the supporters hold the lead to prevent from damage. Independent rotary disc cutters for longer cutting life. Smaller components: like 1/2W, 1/4W resistor are suitable for it. SPECIFICATIONS Dimension: 380(L) x180(W) x 210 (H) mm Weight: 8kgs (N.W.); 9 kgs (G.W.) Simple operation- Rotate hand crank. Production rates: Taped 60,000 pcs/hr ( Depends on operator) RT-80S, RT-82S, RT-86S, RT-90S slim lead (S type)
FEATURES CF-360, Loose radial lead cutter economizes PCB assembly and simplifies component insertion tasks by eliminating costly and tedious manual trimming. Special cutting designed to ensure easy adjustment and long life of cutting tools. Linear feeder accommodates all size of parts. Easy adjusts for lead length. Process up to 9,000 pieces per hour. Easy maintenance and simple operation. SPECIFICATIONS Power: 110V/120V AC 50/60Hz Dimension: 500mm (L), 430mm (W), 470mm (H) Weight: 27 Kgs
Jumper Wire Forming Machine/No Waste, One Lead Length Adjustable No Waste, One Lead Length Adjustable Speed : 7500/H Power : A110V/220V AC. 60HZ/50HZ Dimension: L800 x W400 x H600m/m Weight: 44 Kgs No waste material. Emergency stop device is installed. h Lead Length 0 - 12 m/m H Lead Length 3ï¼?5ï¼?8 m/m L Lead Width 5 - 30 m/m W Wire 0.6 - 0.7 m/m LED Display for Counting. With Quantity pre-set device.
NTG-520N Pre-scored PCB Depaneling machine/ de-panelizer. Separate PCB along with V grooves. [Feature] 1. Separating the V-cut panel boards in the principle of non-bending stress. 2. The knives are adjustable both in axial and radial directions. 3. The round knives separate the board within the V-groove. Slightly adjust according to PCB thickness. 4. The depaneling maximum of PCB width is 160mm, the PCB length is unlimited. [ Specification ] Powerï¼?110V/220V, 50/60HZ Dimensionï¼?(L)430 x (W)430 x (H)520 Weightï¼?36 kgs PCB thickness rangeï¼?0.8-2.0mm www.renthang.com renthang@renthang.com
M-831 Component Counter FEATURES Counting in both directions (Left or right). Divider from 1 to 10 (up to 19upon request). Totalize mode counting. Pre-set mode counting (with an audible signal when the desired components number is reached). Calibration test and self diagnostic procedure. Lest counting value and condition memory. External detector input SPECIFICATIONS Output for external motor control. Accumulator model disposable. Min. lead diameter: £p0.35mm Dimension: 350 x 300 x 280mm Weight: 6Kgs Power: 110V / 220V AC www.renthang.com renthang@renthang.com
SMT-402 SMT Semi-automatic Pick and Place Machine with dispenser. Bench-top and compact size is great for R&D and studio. FEATURES SMT-402 has the function to suck SMT component taping and spot glue on the PC board. Operation with step pad switch to Spot glue SMT component rapidly. The operation function could be separated or combined Sliding axial X and Y. Suitable for sucking and taping small size SMT component Feeder frame could turn around 360 degree, 90 kinds of components could be operated. 16 sets SMT tape reel material could be loaded. uitable for any reel size. Available for sample design, especially for changeable small quantity multi style production. SPECIFICATIONS Power: AC 220 V 50 / 60HZ Dimension: 800 x 720 x 300mm Weight: 22 KGS Air Source: 4 ~ 5 Kg / square cm Feeder: 16 Sets Material Box: 90 pieces MAX. PCB Working Size: 250 x 300mm www.renthang.com renthang@renthang.com +886-2-82011187
Pneumatic Lead Forming Machine---Two direction loose radial forming/cutting : AR-106 FEATURES Customized model, Driven by Air With Twin Air-Cylinder, flexible for small and medium lot of components. Suitable for various types of Radial Lead Components such as Crystal, Capacitor, Resistor etc incorporate with tooling. Forming and cutting operation in one step. Compact design and convenience for tooling exchange. SPECIFICATIONS Dimension: L420 x W300 x H200 mm Weight: 8kgs Air Source: 5kgs/cm2
Automatic PCB Lead Cutter > > Product No. : KA-66 FEATURES Best Selection for medium of high volume production. This model is designed to trim the extra long leads automatically and efficiently on the PCB that components inserted and soldered. A pair of conveyor chain is equipped in the model in which clamp and deliver the PCB to the blade turning in high speed for trimming. Warp prevention device is equipped to ensure no damage on boards. Expandable in function and working independently- The model can be optional connecting in line with wave soldering machine by Connection Bridge and operates automatically. The Tungsten Carbide Blade is excluded in the machine. SPECIFICATIONS Dimension:900(L) x 670(W) x 800(H) m/m Power:220V 50/60HZ,Net Weight:115Kgs Feeding Speed:0 - 3 m (Adjustable) RPM of Spindle:4500 HP:3/4 HP Min. Lead Height:1.0mm Min MAX.PCB Working Size:500mm(L) x 280mm(W)
NTG350 Pre-scored PCB Depaneling machine, PCB Separator: Pneumatic Type FEATURES The machine was designed to depanel pre-scored panelboards carefully, without bending or tension stress. Even sensitive SMD-Components like ceramic capacitors, will not be damaged by the depaneling process, or thin board even to 0.3mm cab be worked safely. Due to the special design of the knives also boards with high components placed close to the edges can be depaneled safely.Based on a proven method of depaneling, wedge-shaped knives are used to cut the panels within the groove. This enables the boards less than 1mm thickness to be separated safely and without creating stress. This machine is pneumatically driven using standard parts. It is noiseless operation with none of usual compressed air noises. Rigid design without vibration in operation The PCB with sensitive SMD capacitor or thin board even to 0.3mm can be worked safely.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine. Depaneling process without vibrations Pneumatic control placed in a separate unit for easier maintenance. SPECIFICATIONS â?¢Easy maintenance and operation. Air source¡GCompressed air 5kg/cm2 Dimension¡G(L) 720 x (W) 500 x (H) 1070 mm Weight¡G190Kgs Knife length¡G350mm PCB thickness range¡G0.3mm ~ 3.0mm www.renthang.com renthang@renthang.com +886-2-82011187
STP450 Manual Stencil Printer - Small batch production and Research & Development usage! FEATURES Special for SMT stencil and screen printing. Available for precision and fine pitch double side printing. Quick set upnd remove function. X and Y axial angle adjustable. Change different spec board very fast and without tools. Double side printing could be finished and changed very fast and precision SPECIFICATIONS Available frame:24" *24"(600* 600mm) Printing area:20"*20"(500*500mm) Repeatability:0.008mm Weight:50Kg Length of squeegee:220mm Size:840*920*250mm www.renthang.com ; renthang@renthang.com
SMT-401 SMT Semi-automatic Pick and Place Machine. Great for R&D and prototype. FEATURES Available for sample design, especially for changeable small quantity multi style production. Sucking quickly the SMT component and taping on the PC board. Sliding axial X andY. keep the SMT component will not vibration when it is Taped on the board. Feeder frame could turn around 360 degree, 90 kinds of components could be operated. 16 setsSMT tape reel material could be loaded. Suitable for anyreel size. Vacuum pipe could suck different size SMTcomponent. Several machine connected could offer bigvolume and efficiency production only small vestment. SPECIFICATIONS Power: AC 220 V 50 / 60HZ ( depends on Country) Weight: 22 KGS Dimension:800x 720x 300mm Air Source: 4 ~ 5Kg / squared cm Feeder:16 Sets Material Box: 90 pieces MAX. PCB Working Size: 250 x300mm Capacity: 20~50pcs / Minute www.renthang.com renthang@renthang.com +886-2-82011187
STP-550 Semiautomatic Stencil Printer FEATURES Special design printing machine for lead free and new style component. When the stencil separate with PC board using vertical lift up function. It could keep clean the surface of the PC board. Suitable for fine pitch layout printing. Flexible double Side board fixed base.Adjustable down ward pressure valve. Button switch operation, Automatic control cylinder frame up and down, twin cylinder control metal squeegee. Fix the press and angle. Printing direction from left to right. Single or double side PC board printing are available. SPECIFICATIONS Suitable frame:24"x24"(600 x 600mm) Printing area:20"x22''(500 x560mm) Repeatability: 0.008mm Weight: 60Kg Length of squeegee:220mm Size:840 x 920x250mm
(1) early in-house engineering and design evaluation to enhance design flexibility and to eliminate the need of additional operation. (2) project management and scientific mold building design for manufacturability (dfm) (3) material selection suggestion to maintain part tolerances and tooling reliability (4) improving part strength and structure to assure the quality, reliability and integrity of the end product. Please visit our web site at www (dot) pyramids (dot) com (dot) tw for more information. ---custom-made order acceptable. Please send us drawings for quotation.
(1) engineering service to help your design for better and efficiency manufacturability. (2) complex products and innovative designs can be created with much geometry. (3) highly automated and incorporate secondary operation. (4) low cycle time enables cost-effective production for large quantities of complex products (5) precision stampings in all shapes, sizes, and materials. Please visit our web site at www (dot) pyramids (dot) com (dot) tw for more information. ---custom-made order acceptable. Please send us drawings for quotation.
(1) capable of prototyping quantity or low-volume production quantities. (2) early in-house engineering and design evaluation like case study, dfm, scientific molding, and moldflow analysis for design flexibility and to eliminate the need of additional operation and cost. (3) dedicated project management with periodically design for manufacturability (dfm) report from our 60 more engineers. (4) we suggest our clients for material selection to maintain part tolerances standard and tooling reliability, (5) improving part strength and structure to assure the quality, reliability and integrity of the end product. Please visit our web site at www (dot) pyramids (dot) com (dot) tw for more information. ---custom-made order acceptable. Please send us drawings for quotation.
Fridge magnet, metal badge, lapel pins, medals, embroidered patches, banner, flag, cuff links, labels, lanyards, key chains, key rings, fridge magnets, magnifier, necktie, ties and tie clips, cake towel, towel, face towel, bath towel, hand towel and promotional gifts.OEM
Injection molding machine vertical type, liquid silicone rubber, hot melt adhesive.
Plastic injection molding, over-molding, aluminum die casting, stamping, extrusion, liquid silicone rubber, fabrication, metal processing, machining, investment casting, assembly, decorating.
1. Apperance with modern minimalist style 2. Suit for modern home furnishings design 3. Stainless steel storage water tray design 4. All metal parts anti-rust treatment 5. Two different ways to make sparkling water 6. Storage water tray contains magnets to ensure the tray is not easy to fall 7. Easy way to open the cylinder container 8. Elegant metal trim.
