Nairobi Tung Oil Suppliers and Manufacturers

Crude Sunflower Oil Specifications Crude Sunflower Oil Specifications Typical Values Specific Gravity ( At 20 C ), G/cm 0,918 0,923 Refractive Index ( At 40 C ) 1,461 1,468 Smoke Point, C Min �±10c Flash Point, C Min �±10c Colour Red ( On Lovibond Cell ) Consistency Liquid Viscous +20c Odour, Taste Specific For This Product Quality And Food Safety Parameter Max Perokside Value, Meq.o2/kg 15 Moisture And Volatile Substances, % 0,2 Acid Value, Mg Koh/g 4,0 Jodine Value, Gj2/100g 118 - 141 Insoluble Impurities, % 0,05 Soap Content, % 0,005 Soaponification Value, Mg Koh/kg 188 - 194 Unsoaponification Matters, % < 15 Typical Fatty Acid Composotion % C 14:0 < 0,2 C 16:0 5,0 7,6 C 18:0 2,7 6,5 C 18:1 14,0 39,4 C 18:2 48,3 74,0 C 18:3 < 0,3 C 20:0 0,1 0,5 C 20:1 < 0,3 C 22:0 0,3 1,5

REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25

Capron Eco Magnatec is a four-season gasoline engine oil produced with mineral base oil and good-quality additives which features proper anti-rust and anti-corrosion properties.

Capron Eco Magnatec is a four-season gasoline engine oil produced with mineral base oil and good-quality additives which features proper anti-rust and anti-corrosion properties.

Capron Eco Magnatec is a four-season gasoline engine oil produced with mineral base oil and good-quality additives which features proper anti-rust and anti-corrosion properties.

Capron Eco Magnatec is a four-season gasoline engine oil produced with mineral base oil and good-quality additives which features proper anti-rust and anti-corrosion properties.

Capron Magnatec Plus is a premium quality four-season gasoline engine oil produced with semi-synthetic base oil and high-quality additives which features excellent anti-rust and anti-corrosion properties.

VEGETABLE COOKING OIL RBD PALM OLEIN RBD Palm Olein is the liquid fraction obtained by the fractionation of palm oil after crystallization at controlled temperatures It is especially suitable for frying and cooking Main applications of RBD Palm Olein include salad and cooking oils in households industrial frying fat of instant noodles potato chips doughnuts and condensed milk GLOBAL INTELLECT VENTURES SDN BHD produces several brands of cooking oil such as FATIM GLOBAL ELLAMIAMIA GOLDEN OIL We also contract produce and package for customers using their own brandsRBD Palm Olein is cholesterolfree and contains vitamin AD and E It has high stability to oxidation and is nutritionally healthy with a balanced composition Emulsifying agents may be added along with permitted colors flavors and other ingredients as desired to suit final product application Our quality standard is in accordance to Palm Oil Refiners Association of Malaysia PORAM Quality standard CP10 QUALITY C CP8 QUALITY B CP6 QUALITY A We can also offer the quality in accordance to IV56 IV57 IV58 IV60 and IV64 The premium quality 100 pure refined vegetable cooking oil RBD Palm Olein extracted from palm oil Rich in vitamin A D E zero cholestrol With no artificial addictive or preservative and Trans fat free Benefit Pure natural goodness rich in Vitamin E A and D Zero Cholesterol With no artificial additive or preservative and Trans fat free refined RBD palm oil for cooking Product CODE Product Description CHEMICAL PROPERTIES PHYSICAL PROPERTIES PACKING IODINE VALUE WIJS g l2 100g FREE FATTY ACID AS PALMITIC MOISTURES IMPURITIES Peroxide Value MEQkg MELTING POINT C Color 5 LOV Max Cooking oil RBDP Olein IV 56 56 Min 01 Max 01 Max 1 max 24 max 3R Jerrycan RBDP Olein IV 58 58 Min 01 Max 015 Max 1 max 9 max 3R Jerrycan We provide premium grade of Palm Cooking Oil in from 5 Liter to 20 Liter onward in jerry can pete Bottle tin drum etc We provide all type of packaging for Palm Cooking Oil from 1 Liter to 25 Liter We supply all types of Palm Cooking Oil CP6 to CP10 We own a factory and provide OEM service for packaging We have PETE bottle Jerry Can Plastic or Steel Drum Flexi bag or Flexi tank We can offer very good and reasonable price for importers

VG10 bitumen is the softest grade of viscosity bitumen. This type of bitumen is widely used for spraying applications and surface coating. VG 10 bitumen means that your bitumen is also suitable for paving roads in a very cold climate instead of the old 80/100 penetration grade. The air temperature that matches VG10 bitumen ranges from -10 â?¦C to 25 â?¦C. Due to the high temperatures in hot climatic zones, the application of VG10 cannot provide desirable rutting resistance. This type of bitumen is also used to manufacture bitumen emulsions and modified bitumen products especially in India. As a viscosity grade bitumen, VG10 has a better performance incold weather. To know vg10 latest price contact us.

VG-20 bitumen is a grade of viscosity bitumen used in cold climatic and high altitude regions. This grade of bitumen is suitable for road construction in regions with 30 to 37 C average temperature. In North India, vg20 is used for road construction in hot mix asphalt. The standard penetration value of bitumen viscosity grade VG-20 is 60 mm at 25 C. The absolute viscosity of VG-20 bitumen is 1600 to 2400 poise at 60 C.

Bitumen Penetration Grade 85/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RABIT Trading Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 85 to 100. Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen penetration grade 85/100 is semi hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 85/100 is one of the most used bitumen grades and it�¢??s a basic material for all other bituminous products. Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.

Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair conjointly for the production of asphalt pavements with below technical specifications. This grade of bitumen is mainly used in the manufacture of hot combine asphalt for bases and wearing courses. Bitumen 60/70 is the most used bitumen grade and basic material for all alternative bituminous products. Bitumen Penetration Grade 60/70 is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RAHA GROUP is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RAHA GROUP is produced from vacuum residue (short residue) feedstock. RAHA Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.

Bitumen penetration grade 40/50 bitumen means the penetration value is in the range 40 to 50 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 40 to 50. Bitumen is specified by the penetration and softening point test. Designing is by penetration range only. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.

VG40 bitumen is used in areas in which high pressure comes from heavy traffic loads, such as intersections, near tolls booths, and truck parking lots. Due to the high viscosity of this bitumen, it is more appropriate for improving resistance to shoving and other problems associated with higher temperatures and heavy traffic loads. Itâ??s long time that industries use vg-40 instead of the penetration grade bitumen 40/50.