Dear Sir Madam Our company, as the main exporter, with full responsibility are willing and able to enter in long-term cooperating with potential customers and we offer You our products bellow origin Ukraine : 1. Refined sunflower oil deodorized: 2. Walnut Kernels (Export quality): 3. Pumpkin seeds: 4. Sunflower meal, granulated 5. Yellow corn: 6. Feed Wheat: 7. Bran granulated 8. Meat canned food high quality 9. Sunflower millcake
BBQ & RESTAURANT CHARCOAL Origin: Ukraine Type: Natural Grade: A Specifications: Fixed carbon > 75% Volatile matters: 15.5% Ash content < 5% Moisture content < 8% Heating level: Kcal/Kg 6800-7200 Burning time: 40 minutes up hour and more Wood type: oak trees, birch tree, hornbeam. No spark, no smoke, no smell, low ash, easy ignite.
Purpose: Dewatering and beneficiation of coal sludge and ore sludge, size 3...0 m; Dewatering and beneficiation of concentrate fines and fine materials, size 6…0, 5 mm Application: Concentration mills - dewatering and beneficiation of fine coal, ores, sand. Sludge tanks - dewatering of coal sludge and ore sludge, sand separation from sludge Mining plants - purification of industrial waters from mines, beneficiation of tailing dums of mining.
CharactEristics of our lump charcoal: Size - 5 cm -120 cm (we can make it smaller, if you require) Water - 3% Ash - 1.3% Non-volatile carbon - 77-80%. Our charcoal is made from oak, birch, acacia, hornbeam and also fruit species. We hope our proposal would be acceptable for you. 2,5-3 kg paper bags 10 kg paper bags 15 kg polypropylene bags.
We are DDK trading company, Ukraine offering below wooden products on very excellent terms and conditions. We are big manufacturer of these woods in Ukraine. We can hand shake with you in this business- 1. Sawn timber Pine, Spruce, Pine and Spruce wooden board grade- ABC 2. Beams - Pine. Spruce - wood 3. Decking elements (Pine, Spruce) 4. pine Planed lumber S4S, planed wood S4S grade 1.2 5. Pallet elements, A grade Pallet elements B grade, Pallet elements C grade- Planed board ABC grade 6. Lamel- furniture, glued, and planed 7. Furniture shield 1[m3]
High Quality Soybean Refined Oil. The direct contract with the End Seller . Quality control by a Swiss company. Origin: Produced from Ukrainian raw materials at a plant in Malaysia, meeting the Specifications and confirmed by certificates, including SGS REFINED SOYBEAN OIL FFA ( Percent) NEN-EN-ISO 660 max 0,1 Moisture ( Percent) NEN-EN-ISO 662 max 0,05 Impurities ( Percent) NEN-EN-ISO 663 negative Colour Lovibond (5 188 inch) NEN 6308 15Y, 1,5R Peroxide Value at loading (meq/kg) NEN-EN-ISO 3960 max 1.0 Relative density at 20oC NEN 6311 0,91 - 0,93 Iodine value (g 12/100g) Own method 125 - 140 PRODUCT NO GMO We speak: English, Russian, Polish, German, Ukrainian.
White Beet Sugar Class 3 Standard 4623. Gost 31361 Sugar Produced a Crystal Size of 0.2 to 2.5 Mm. Deviations From the Lower and Upper Limits of the Specified Size Up to 5% by Weight of Granulated Sugar. Color: White at 20 C Polarization: 99.8 % Min. Ash Content: 0.021 % Max. Moisture: 0.05 % Redicting Sugar: 0.025% Maximum by Weight Pb Content: Maximum 1ppm As Content: Maximum 1ppm Cu Content: Maximum 3ppm Hpn Staph Aureus: Nil (1000) Mc Soloubility: 100 % Dry and Free Flowing Sediments: None Smell: Free of Any Smell Granulation: Medium to Fine Magnetic Particles: 4 Mg / Kg or Less So2 Content: 20 Mg / Kg Maximum Radiation: Normal Moisture: 0.06% Maximum Substance: Solid Crystal Product No Gmo Euro 1 and T2l. Origin in Brazil. The Price 303 $ / MT CIF
We have very good Jasmin Rice offer valid until 25.10.20! 25 % brocken Jasmin Rice. 25 000 mt per month for 12 months. Total 300 000 mt. ONLY $445.00 CIF!!! This is best offer we have now! Vietnam long grain white rice 25% broken broken : 25 % MAX yellow kernels : 1,5 % MAX Moisture : 14,5 % MAX damaged kernels : 6,5 % MAX red and red streaked kernels : 7 % MAX foreign matters : 0,5 % MAX average lenght of kernels : 6,2 mm/min chalky kernel : 7 % MAX paddy per kg (grain) : 5 grains/kg MAX immature kernels : 1,5 % MAX milling degree : well milled, polished and sortex crop 2020
Granular Urea 46% 1000kg PP Bags , FOB Bandar the price of 262$ MT. We have ability to arrange the logistics and supply to any country with CIF conditions. The payment condition is by prepayment (preferably) or SBLC / DLC / LC (needs be discussed). The product is of Turkmenistan origin and we are able supply of the Urea till 50 000 MT monthly. UREA 46% - THE TYPICAL PHYSICAL PROPERTIES Name of parameter B Grade 1. Nitrogen fraction of total mass on dry basise, %, not less 46,2 2. Biuret (Ureido Formamide) fraction of total mass,% no more 1,4 3. Loose ammonia fraction of mass, % no more for carbamide crystal - prilled - 4. Mass share water, %, no more - Method of drying 0.3 - Method Fishera 0.5 5. Friability, % 100 6. distribution of sizes,%: - fraction of total mass of granules with size,mm : 1 - 4,not less 94 2 - 4, not less 70
Data name Limit: In fact: Organoleptic test Odor and taste: Odorless; Neutral taste Approved Color: Light yellow - yellow Approved Transparency Transparent, without sediment Approved Physical-chemical parameters: Color index, mg of iodine ≤10 2 FFA, mg ÊÎÍ/g (fresh) ≤0,2
Carbamide(Urea) H2N-CO-NH2 TDS- 2081-92 SPECIFICATIONS: 1. Nitrogen fraction of total mass on dry basise, %, not less 46.3-46.2 2. Biuret (Ureido Formamide) fraction of total mass, %, not more 0,6-1,4 3. Loose ammonia fraction of total mass, %, no more, for carbamide - crystal 0,01 - 0,01 - prilled 0,02- 0,03 4. Mass share of water, %, no more: - Method of drying 0,3 - Method Fishera 0,6 - 0,5 5. Friability, % - - 100 6. distribution of sizes, %: - fraction of total mass of granules with size, mm : 1 - 4, not less - - 94 less than 1, not less - 3-5 6-mm sieve residue, no more - Absence 7. Static hardness of granules, kgf/granule, not less - 0,7- 0,5 -0,3 Tha price is 230 $ FOB. Crystal carbamide (urea) is received from ammonia and carbon dioxide. carbamide is used in an industry as raw materials at manufacturing of pitches, glues, etc., for use in agriculture as mineral nitrogen fertilizer. Carbamide can be utilized in animal husbandry as fodder additive. Depending on purpose, two carbamide marks are produced: A- for industry; B for agriculture. Carbamide is non-combustible, fire-and is explosion-proof under normal conditions. As regards to its influence on organism, it falls into 3-rd class of hazardous substances. Carbamide is packed in paper bitumized of laminated bags, polyethylene bags, woven polymeric laminated bags woven polymeric bags with inserts, and also in soft specialized containers as MKR-1, OS. Carbamide is stored in closed store rooms protecting the product from rainfall. At storage of product in bulk its mixture with other fertilizers is not permitted. It is permitted to store carbamide containers and transport packages fastened by synthetic film on open areas. Warranty period of product storage 2 years from the date of manufacturing.
Hello, Sir We would like to offer actual prices : ALL SPA WILL BE WITH END SELLERS. 1. FROM BRAZIL: FEED Corn- 201 $/mt FOB FEED Corn- 241 $/mt CIF FEED Barley - 231 $/mt FOB FEED Barley - 271 $/mt CIF SOYBEAN - 473 $/mt FOB WHEAT (12.5%) - 243 $/mt FOB SUGAR Icumsa 45 - 256 $/mt FOB 2. FROM UKRAINE: refined sunflower oil - 1463 $/mt/flexitank FOB. refined sunflower oil - 1.50 $/1L bottle FOB. crude sunflower oil - 1383 $/mt/flexitank FOB. Boneless beef for China â?? 5.2$/kg/FOB Boneless beef - 4.08 $/kg/FOB Walnuts in shell - 1183$/mt/FOB Walnuts, 1/2, light - 6.18$/kg/FOB Feed corn - 348 CIF in bags, bulk in containers 333 CIF Beirut 3. FROM RUSSIA: refined sunflower oil - 1378 $/mt/flexitank FOB. refined sunflower oil - 1.40 $/1L bottle FOB. crude sunflower oil - 1293 $/mt/flexitank FOB. crude soybean oil - 1098 $/mt/flexitank FOB. crude canola oil - 1018 $/mt/flexitank FOB. FEED Barley - 256 $/mt CIF Iran FEED Corn (forward) - 251 $/mt CIF Mersin FEED Corn - 291 $/mt FOB 4. FROM NEW ZEALAND: MILK POWDER 28% - 3253 $/mt CIF DUBAI MILK POWDER 28% - 2653 $/mt CIF DUBAI 5. FROM ROTTERDAM JET A - minus 6 gross/5 net BBL , DIP and PAY We hope to receive your answers soon. Thanking you in advance, Yours sincerely, General Manager Valeriia Marchenko 6. FROM UZBEKISTAN LUMP SULFUR - 120 $/ mt FOB BENDER ABBAS 7.FROM OMAN UREA 46% - 295 $/ mt CIF
A4 paper 80g 1.size: A4(210*297mm) 2.gram:80/75/70gsm 3.brightness:102-104% 4.material:100% wood pulp a4 paper 80g New product under Paperon, makes your copy machines "Accelatration" 1. “Being mild”, within international trend of paper color, the natural whiteness prevents eyes from dizzling and pain in reading. 2. “Being smooth”, padded with calcium carbonate combined with non-pollution PC, the paper has more smoothness and better 3D effect. 3. “Being economic”, AKD 2-sides gluing makes the paper with perfect ink-absorption which can save expense from consumables. 4. “Being jam-free”, tight fiber structure prevents paper from jamming and curling during copying and suits for high speed copying. 5.” Being responsible”, As an eco-friendly enterprise, we make paper with farmed tree instead of forest tress and reduce emission of carbon dioxide . Seven advantages: 1.Good feeding effect: Precise control on moisture during production guarantees the flattening of paper in copying and reduces jamming. 2.Distinct copying: Smooth surface makes for copying of original colors. The copy looks like originals. 3. Time saving and convenience: Paper is neatly and precisely cut with rotary engine. Paper does not adhere to each other. Jamming and double-feed happens less. Thus work time is saved. 4. Being white and bright: with high-quality material and advanced techniques, the paper is high in whiteness and brightness and improves distinctness in copying. 5. Longer working life of copy machines: neat cutting reduces the dust in paper. Smooth surface reduces the machines from wearing and maintaining. 6. Double-copying, and economic: high-quality material makes the paper with good opacity. Double-copying still has good effect. 7. 500 sheets in one ream: we guarantee 500 sheets of high quality paper in one standard ream.
Granular Urea 46% in Bulk, manufacturer in Turkmenistan with price of 185$-195$ MT (it depend manufacturer). The product is of Turkmenistan origin and they are be able to supply of the Urea till 50 000 MT monthly. UREA 46% - THE TYPICAL PHYSICAL PROPERTIES Name of parameter B Grade 1. Nitrogen fraction of total mass on dry basise, %, not less 46,2 2. Biuret (Ureido Formamide) fraction of total mass,% no more 1,4 3. Loose ammonia fraction of mass, % no more for carbamide crystal - prilled - 4. Mass share water, %, no more - Method of drying 0.3 - Method Fishera 0.5 5. Friability, % 100 6. distribution of sizes,%: - fraction of total mass of granules with size,mm : 1 - 4,not less 94 2 - 4, not less 70 less than, not less 3 6-mm sieve residue, no more 6-mm sieve residue, no more 7. Static hardness of granules, kgf/granule, not less 7 Urea the most concentrated Nitrogen fertilizer, contains in form, soil converts first into into nitrate forms. It is easily soluble in water. We have ability to arrange the logistics and supply to any country with CIF conditions. The payment condition is by prepayment (preferably) or SBLC / DLC / LC (needs be discussed).
We are offering you the Copper Wire Scrap Millberry 99.99% at $3800 Mt/cif any port Copper detailed specification : Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 Copper Scrap CERTIFICATE OF ANALYSIS Item Standard Result Cu% 99.9 min 99.99 Sb% 0.002max 0.001 As % 0.002max 0.0006 Fe% 0.005 max 0.0012 Ni% 0.002 max 0.0008 Pb % 0.005max 0.0025 Sn% 0.002max 0.0007 S% 0.005max 0.003 O% 0.002max 0.001 Zn% 0.005max 0.002 P% 0.001max 0.0002 ELEMENTS VALUE RESULT Copper Cu 99.95% Min. Cobalt Co 0.001% Max. carbon C 0.003% max Iron Fe 0.005% Max. phosphorus P 0.01% Max. sulphur S 0.01% Max. Znic Z 0.03% Max. Minimum Order: 25 MT Capacity: 10,000 mt Location: Eastern Europe Payment terms: Bank transfer only. Supply Ability Supply Ability 30000 Metric Ton/Metric Tons per Month Regards Newman Cole
HOT-H stainless steel orthopedic and neurosurgery surgical operating table HOT-H multi-purpose operation table is an improvement product developed on the basis of 3008 series head-manipulation type multipurpose operation table and is for use of general operations in chest surgery, department of ophthalmology, department of otolaryngology, department of obstetrics and gynecology, urological department etc. As a unit of non electronic control system comprehensive operation equipment, it is convenient and flexible to operate. PRODUCT'S FEATURES: 1) A multifunctional operation table that applies to various surgical operations and examinations. 2) Adoption of a foot hydraulic pump that integrates oil tank of oil pump and drive mechanism. 3) Adoption of the imported cylinder that controls actions of table top and is convenient to operate and reliable to locate. 4) Compact and rational structure and originate model. 5) Built-in waist bridge is convenient to use. 6) Both guide rail and accessories are made of corrosion resistant stainless steel. 7) All mattresses use the new-style materials that are acid and alkali resistant and disinfection durable. good price
Sunflower oil from the best sunflower varieties of the South of Ukraine. Refined and deodorized. Use: designated for a direct food consumption and food production. REFINED SUNFLOWER OIL Type: Refined, Winterized, Deodorized, Bleached. Standards: Conform to European Norm CEN/TC 307 or Standard of production country, and International Standard Organization ISO/TC 34/SC11, International Food Standards of United Nations and FAO Codex Alimentarius CODEX STAN 210-1999 Standard for Named Vegetable Oils. Quality: Fit for human consumption, free from foreign matter, any other oil or animal fats. Color: Light yellow, clear and transparent. Odor: Neutral odor, without an artificial odor additive. Visibility: Without any deposition and blurriness. Taste: Neutral, without an artificial taste, free from rancidity or any strange or bad taste and smell. Shelf Life: 24 months Physical and Chemical Analysis Values: (The values may vary within standards) Acidity (Free Fatty Acid): 0,3 maximum. Peroxide Value (meq O2 / kg Oil) at End of Expiry Date: 8,0 maximum. Peroxide Value (meq O2 / kg Oil) at Production Date: 1,0 maximum. Iodine Value (WIJS): 118 - 141 Moisture and Volatile Matter (% at 105oC): 0,2 maximum. Saponification Value (mg KOH / g oil): 188 - 194 Unsaponifiable Substances (%): 1,5 maximum. Insoluble Substances in Fat Solvent (%): 0,05 maximum. Refractive Index (at 40oC): 1,461 - 1,468 Specific Weight (g at 20oC): 0,910 - 0,925 Soap Content (%): 0,005 maximum. Amount of Phosphorous: Maximum 5 ppm. Remains of Solvent: None. Heavy Metal Analysis: Mercury (Hg): 0,02 mg / kg maximum. Cadmium (Cd): 0,02 mg / kg maximum. Arsenic (As): 0,05 mg / kg maximum. Copper (Cu): 0,1 mg / kg maximum. Lead (Pb): 0,1 mg / kg maximum. Iron (Fe): 1,5 mg / kg maximum. Zinc (Zn): 5 mg / kg maximum. Nutrition Facts in 100 gram: Energy: 829 kcal / 3400 kjoule Total Fats: 100 g Protein: 0 g Carbohydrate: 0 g Cholesterol: 0 g Vitamine: The product does not contain any added vitamine. GMO: Free from Genetically Modified Organisms (GMO). X-Ray Contamination Level: Meets requirements Euratom 3954 / 87. Halal Nutrition (Islam): Meets requirements. Kosher Meats (Jewish): Meets requirements. Vegan or Full Vegetarian: Meets requirements. Lacto Vegetarian: Meets requirements. Ovo - Lacto (Egg - Milk) Vegetarian: Meets requirements. PRODUCT NO GMO
The charcoal kiln UMT-3 The charcoal kiln UMT-3 has all the unique qualities installations series "UMT". But in this model we have provided not only enhanced protection from the so-called "human factor", but also we have developed an automatic protection that works completely offline. It allows to reduce in several times the risk of equipment damage from negligence of employees and increase productivity by 10-15% . Now the minimum capacity of this charcoal kiln is 35 tons per month using wet wood till 50 tons per month using dry wood. Also its possible to burn all kinds of fuel briquettes such as "Pini Key" and "Nestro" into charcoal briquettes The productivity of the briquette is 100-120 tons / month 1.Improved installation design. 2.Increased productivity from 35 tons per moth for charcoal and 100-120 tons per month per briquettes 3.Automatic protection from extreme temperatures, works completely offline. 4.The high quantitative and qualitative characteristics of charcoal and briquette. The ratio of wood to charcoal is 5.1m3 per 1 ton of charcoal 5.Low operating costs. The equipment serves one person whether it is a single installation, two or three. 6.Works on its own gas. Power consumption is 20 W/hour, 24V/hour 7.Quick and easy unloading of finished products and loading of raw materials in the retort - up to 5 minutes 8. Mobility. Charcoal kilns can be moved if its necessary. 9.Work without repairs. We give a guarantee for two years 10.Environmental cleanliness. No emissions into the atmosphere either before or after or during the production process 11.Extended range of plug-ins for the selection of excess heat - a wood drying, hot water boilers, waste incineration. 12.Low cost of equipment. Taking into account the calculation of the cost of a ton of charcoal produced per year, the price of charcoal kiln is the lowest in the world market. Two years of operation have confirmed the reliability of our equipment Parameters Width -depth ?height 5680x2600x2690 mm Weight 8500 kg Productivity 30-55 tons per month Guarantee 24 months Terms of manufacturing 45 workdays
Place of Origin: Xiamen,China Brand Name: OEM brand Model Number: Uzet-pipe-001 Plastic molds material:Steel P20.718HH, 2738 ,H13, 45#,C50 ect Shaping Mode: Plastic Injection Mold Product Material: Plastic Product: Household Product Precision: 0.005mm Design service: available Plastic Material: PP , PS, PET, PE ,ABS,ect Mould Base: LKM.HASCO,ect Cavity: Single/Multi Runner: Cold /Hot Surface treatment: machined finish Mold Life: 500000shots-1000000shots Design Software: UG ,Proe ,CAD/CAM,ect Lead Time: 25-30days Delivery Port: xiamen,China Packaging Details: wooden case + bubble bag cardbord box + bubble bag OEM Factory of Injection Plastic Mold Manufacturing from China Supplier Product Type Plastic injection mold(mould) Our Services Plastic mold design, plastic mold making, products sampling,plastic products produce,plastic injection molding, Material Aluminum,Brass,Stainless Steel,Copper,Plastic, Or as per the customersâ?? requirements Surface Treatment Anodizing,Sandblasting,Painting,Powder coating,Plating,Silk Printing,Brushing,Polishing,Laser Engraving Drawing Format .jpg/.pdf/.dxf/.dwg/.igs./.stp/x_t. etc Service Project To provide production design, production and technical service, mold development and processing, etc Testing Machine Digital Height Gauge, caliper, Coordinate measuring machine, projection machine, roughness tester, hardness tester and so on Packing Foam, Carton, Wooden boxes, or as per the customerâ??s requirements Payment Terms T/T,Western Union,Paypal,LC, DP,DA Certification SGS, ISO9001 FAQ 1. Q: What kind of products can you do? A:plastic mould, injection mold, Plastic injection molding , plastic parts mass production . 2. Q: What kind information is needed for quotation? A: 1) Sample photo with size or 2D/3D design 2) Product material 3) The quantity 4) Runner type: cold or hot 5) Mould steel type, P20, 718, 2738, H13, S136, 2316 etc. 3. Q: I have no 3D drawing, how should I start the new project? A: Sample is needed OR your ideas,then we could help to finish the 3D drawing. 4. Q: How long will it take for finishing injection mold? A: Usually it will take around one month to finish plastic injectioin mold. 5. Q: How about the samples? A: Some plastic product samples will be made after mold finished and also would send you for your checking 6. Q: How about the mould modify? A:Modifying will be processed for free according to your comments if any difference from currently after you saw samples.And new samples will be made. 7. Q: How about the proprietary rights of the plastic injection mold? A: Customer paid the mould so it all belong to Customer.
ORIGIN : TURKEY/VIETNAM PACKING : In 50 Kg Bags/BULK. SPECIFICATIONS: CEMENT - 42.5 R : Chemical Composition SILICON DIOXIDE (SIO2) 21.00 ALUMINIUM OXIDE (A12O3) 5.30 FERRIC OXIDE (FE2O3) 3.30 CALCIUM OXIDE (CAO) 65.60 MAGNESIUM OXIDE (MGO) 1.10 SULPHUR TRIOXIDE (SO3) 2.70 LOSS OF IGNITION (LOI) 0.90 TRICALCIUM SILICATE (C3S) 60.00 DICALCIUM SILICATE (C2S) 15.00 TRICALCIUM ALUMINATE (C3A) 8.05 TRICALCIUM ALUMINO FERRICE (C4AF) 9.76 CEMENT - 42.5 R : Physical and Mechanical Properties BLAIN CM2/GR 3.250 AUTOCLAVE EXPANTION 0.02 INITIAL SETTING TIME (VICAT) 105 MINUTES FINAL SETTING TIME (VICAT) 135 MINUTES @ 03 DAY'S 230 KG/CM2 @ 07 DAY 39 S 305 KG/CM2 COMPRESSIVE STRENGTH @ 28 DAY 39 S 420 KG/CM2 QUANTITY PRICE: SPOT CONTRACTS: 12,500 MT â?? USD 105.00/pmt 25,000 MT USD 104.00/pmt 50,000 MT USD 102.00/pmt 100,000 MT USD 100.00/pmt ANNUAL CONTRACTS: 150,000 MT USD 98.00/pmt 300,000 MT USD 95.00/pmt SMALL QUANTITES 500 MTS -8000 MTS @ FOB US$65.00 PMT VIETNAM/IRAN PORTS. ABOVE PRICES ARE MAJOR SEAPORTS AND NOT ISLAND PORTS. DESTINATION DELIVERY: Destination: CIF ASWP. Shipment: First Shipment in 30-45 Days and Rest in Every 30 Days after Receipt of Payment Instrument to the Sellers Bank. PAYMENT: By Irrevocable, Transferable Confirmed DLC 100% Payment at Sight for total Quantity from Top Western Prime Bank. INSPECTION: S.G.S Inspection for Quality and Quantity Service at Sellers Cost at Place of Loading. PROCEDURES: 1) Buyer issues a LOI + 2) Seller issues FCO 3) Buyer sign seal and return the FCO 4) Seller issues Draft Contract 5) Buyer sign, seal and return the Contract, seller sign the contract and return to the Buyer 6) Buyer Bank sends a DLC to the sellerâ??s Bank 7) Shipment Starts.
