MI index: 18 - Made in Korea - Manufacturer: SK global chemical - Production use: paint cans, vases, floor mats, household appliances, auto parts, pesticide bottles, toys.
Silica Sand mesh 325 Typical properties: Fe2O3: 0.005% SiO2: 99.4% Al2O3: 0.05% Quantity: 5,000 MT/month Application: for ceramic, glass, construction materials, paint, plastics Price: USD20/MT FOB H
1. Product Overview VHF finger expansion joints made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), include 2 types: Cantilever VHF-C and over-gap VHF-O, according to: AASHTO LRFD standards ASTM D 3542 92 (2003) standards VHFC and VHFO are synchronously manufactured with high accuracy finger plates and accessories like bolts, rubber sheets-water prevention steel plates that bring profitability to new construction as well as inspection and maintenance work in service. VHFC and VHFO accommodate the medium movement to big movement and can be used for both straight and skew bridges. 2. PRODUCT CHARACTERISTICS Totally accommodate the medium and large longitudinal movements, and also vertical and transverse movement if any... Simple installation, maintenance and replacement, which allows to replace the individual finger plates in short period of time and for each lane. High loading resistance capacity, especially the impact load. Also available for skew bridges. Rubber seal system is designed to be totally water-tight and prevent dust and debris. Can be designed to compatible with different thicknesses of bridge decks. To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods like: paint with 2-component epoxy coating, PU-based painting (Polyurethane).., zinc coating according to ASTM A123, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8hour cycles) according to ASTM B117 standards.
1. PRODUCT OVERVIEW VHB Pot Bearings made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268: 2014, AASHTO LRFD: 2007 â?? Section 18, ASTM D 5212 â?? 03, BS5400, EN1337, KS4420). VHB Pot Bearings are capable of withstanding high loads, displacements and rotation angles. This type of bearing is suitable for middle-range span structure, continuous bridge structure, etc. with a load capacity of up to 60000kN or above depending on projectsâ?? requirements. VHB pot bearings have a well-shaped structure, superior design, which are convenient for installation and maintenance during operation. 2. PRODUCT CHARACTERISTICS VHB pot bearings are comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along the horizontal axis. Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding part can be designed to limit or allow the movements as required from the structures. Pot Bearings are divided into 2 main types: Fixed pot bearings and sliding pot bearings. Fixed pot bearings: The bearings only allows the head of structure to have rotary movement and transfer the pressure through a fixed point. Sliding pot bearings: This type of bearings includes Free sliding bearings and Guide sliding bearings, which allows the dead to have both rotary movements and unidirectional or multidirectional movements. To ensure the long-life durability, VHB pot bearings are protected against corrosion by the following methods: painting with two-component epoxy coat, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg coating spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours.
1. PRODUCT OVERVIEW VHF finger expansion joints made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), include 2 types: Cantilever VHF-C and over-gap VHF-O, according to: â?¢ AASHTO LRFD standards â?¢ ASTM D 3542 â?? 92 (2003) standards VHFâ??C and VHFâ??O are synchronously manufactured with high accuracy finger plates and accessories like bolts, rubber sheets-water prevention steel plates that bring profitability to new construction as well as inspection and maintenance work in service. VHFC and VHF O accommodate the medium movement to big movement and can be used for both straight and skew bridges. 2. PRODUCT CHARACTERISTICS Totally accommodate the medium and large longitudinal movements, and also vertical and transverse movement if any... Simple installation, maintenance and replacement, which allows to replace the individual finger plates in short period of time and for each lane. High loading resistance capacity, especially the impact load. Also available for skew bridges. Rubber seal system is designed to be totally water-tight and prevent dust and debris. Can be designed to compatible with different thicknesses of bridge decks. To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods like: paint with 2-component epoxy coating, PU-based painting (Polyurethane).., zinc coating according to ASTM A123â?¦, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8hour cycles) according to ASTM B117 standards.
1. PRODUCT OVERVIEW VHB Pot Bearings made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268: 2014, AASHTO LRFD: 2007 â?? Section 18, ASTM D 5212 â?? 03, BS5400, EN1337, KS4420). VHB Pot Bearings are capable of withstanding high loads, displacements and rotation angles. This type of bearing is suitable for middle-range span structure, continuous bridge structure, etc. with a load capacity of up to 60000kN or above depending on projectsâ?? requirements. VHB pot bearings have a well-shaped structure, superior design, which are convenient for installation and maintenance during operation. 2. PRODUCT CHARACTERISTICS VHB pot bearings are comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along the horizontal axis. Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding part can be designed to limit or allow the movements as required from the structures. Pot Bearings are divided into 2 main types: Fixed pot bearings and sliding pot bearings. Fixed pot bearings: The bearings only allows the head of structure to have rotary movement and transfer the pressure through a fixed point. Sliding pot bearings: This type of bearings includes Free sliding bearings and Guide sliding bearings, which allows the dead to have both rotary movements and unidirectional or multidirectional movements. To ensure the long-life durability, VHB pot bearings are protected against corrosion by the following methods: painting with two-component epoxy coat, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg coating spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours.
1. Product Overview VHF finger expansion joints made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), include 2 types: Cantilever VHF-C and over-gap VHF-O, according to: AASHTO LRFD standards ASTM D 3542 92 (2003) standards VHFC and VHFO are synchronously manufactured with high accuracy finger plates and accessories like bolts, rubber sheets-water prevention steel plates that bring profitability to new construction as well as inspection and maintenance work in service. VHFC and VHFO accommodate the medium movement to big movement and can be used for both straight and skew bridges. 2. PRODUCT CHARACTERISTICS Totally accommodate the medium and large longitudinal movements, and also vertical and transverse movement if any... Simple installation, maintenance and replacement, which allows to replace the individual finger plates in short period of time and for each lane. High loading resistance capacity, especially the impact load. Also available for skew bridges. Rubber seal system is designed to be totally water-tight and prevent dust and debris. Can be designed to compatible with different thicknesses of bridge decks. To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods like: paint with 2-component epoxy coating, PU-based painting (Polyurethane).., zinc coating according to ASTM A123, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8hour cycles) according to ASTM B117 standards.
1. PRODUCT OVERVIEW VHB Pot Bearings made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268: 2014, AASHTO LRFD: 2007 Section 18, ASTM D 5212 03, BS5400, EN1337, KS4420). VHB Pot Bearings are capable of withstanding high loads, displacements and rotation angles. This type of bearing is suitable for middle-range span structure, continuous bridge structure, etc. with a load capacity of up to 60000kN or above depending on projectsâ?? requirements. VHB pot bearings have a well-shaped structure, superior design, which are convenient for installation and maintenance during operation. 2. PRODUCT CHARACTERISTICS VHB pot bearings are comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along the horizontal axis. Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding part can be designed to limit or allow the movements as required from the structures. Pot Bearings are divided into 2 main types: Fixed pot bearings and sliding pot bearings. Fixed pot bearings: The bearings only allows the head of structure to have rotary movement and transfer the pressure through a fixed point. Sliding pot bearings: This type of bearings includes Free sliding bearings and Guide sliding bearings, which allows the dead to have both rotary movements and unidirectional or multidirectional movements. To ensure the long-life durability, VHB pot bearings are protected against corrosion by the following methods: painting with two-component epoxy coat, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg coating spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours.
20 liter oil tank # 20 liter oil tank # 20 liter oil tank # 20 liter oil extraction tank # 20 liter chemical tank # glue tank # SICA # 20 liter paint tank # 20 liter paint tank manufactured by Hoa An Plastic Produced on modern machinery and technology lines, the product is made from 100% primary plastic resin with bonding additives, pigments... 20 liter oil tank shell used for businesses, chemical factories to store oil, grease...
Vinh Hung specializes in manufacturing safety parapet for transport, civil and industrial works. Parapet products are manufactured according to the typical design of the company or according to customer drawings. Our Parapet products conform to the standards: BS EN 1317, TCVN 11823-13: 2017. All parts of the parapet are processed on modern machinery lines, high precision, in order to facilitate the installation and durability of the product. Parapets are the outermost of the bridge deck. Handrails are used to protect vehicles and people when a collision occurring and direct the vehicles on bridges. Parapets are mainly used steel, aluminum alloy, wood, reinforced concrete. Installed on the bridge concrete barrier, parapets donot only ensure traffic safety but also increase the aesthetics of the whole bridge. Parapets consist of column system, handrails and the middle bar which are hot-dip galvanized or electrostatic painting with multiple types, sizes and designs. Parapets aesthetics are required very high when designing, especially the bridges in the city area or in the important roads. All details of the parapet are processed on modern machinery lines with high precision and skilled workers to improve job efficiency as well as durable installation of products. Vinhhung parapets are hot-dip galvanized according to AASHTO M111 (ASTM A123) which would bring the maximum life for products. The high quality of Vinhhung parapets is affirmed when reaching out to the region with export orders to projects in Brunei
Commodity JOSS POWDER/ TABU POWDER/ LITESEA GLUTINOSA/ WOODEN GLUE POWDER Viscosity 36 cups : 780-1140 (100% Bark + 0% leaf) 24 cups : 570-650 (80% Bark + 20% leaf) 22 cups : 460-560 (60% Bark + 40% leaf) 20 cups : 350-450 (40% Bark + 60% leaf) 18 cups : 280-340 (30% Bark + 70% leaf) 16 cups : 160-270 (20% Bark + 80% leaf) Color light brown to deep brown Moisture 13% max Mesh size 80-90 min Packing 50kgs/PP bag 28 MTs/ cont 40 18 MTs/ cont 20 Place of Origin Vietnam Made from LITESEA GLUTINOSA tree and leaft, barks Usage making agarbatti/incense sticks, mosquito coils, for fish food, paint production Payment Term TT, DP AT SIGHT, LC AT SIGHT Production Time 7 days Transportation Time Depending on the distance between loading port and discharged port MOQ 18 tons (20ft FCL)
Name: Asbestos free fiber cement corrugated roofing sheet Original: Made in Vietnam Color: Nature gray or customized Profile: 177/51 or 130/35 Packing: 900 sheets/cont20 flc Less than 28 tons/cont20 flc Robust protector, corner protector PVC wrap With or without pallet Delivery: Sea port: Haiphong port, Vietnam Delivery time: around 14 days Our service: We are the leading manufacturer of fiber cement sheet Made in Vietnam We supply: - Non asbestos cement corrugated sheets - Color fiber cement board (painted color roofing and color-through roofing) - Fiber cement board - Accessories: roof ride accessory (male and female) and flat roof Payment terms: L/C or T/T Company information: Manufacturer: roofing sheet made in Vietnam Capacity production: 3 millions sheets per year Branch: Hai Duong province and Vinh Phuc province, Vietnam Head office: Hanoi, Vietnam
Hello my dear customer, Good day to you My name is Clover from Kego Company Limited which is a reliable supplier of Ground Calcium Carbonate. It is being increasingly used in many applications such as: paper, paint, plastics, ceramic, crystal, animal feed, medicine, food production. Follows are specification of our products for your information: Physical Analysis Chemical Analysis Whiteness: 98% min CaCO3: 99.46% min Brightness: 96% min Fe2CO3: 0.01% max Hardness: 3 Moh MgO: 0.02% max Moisture: 0.2% SiO2: 0.03% max Oil absorption: 23g/100g CaCO3 Al2O3: 0.02% max Density: 2.65-2.7g/cm3 pH: 8-9 We would like to draw your attention to the following terms of trade: Price: 60 USD/MT Min order quality: 50MT Supply quality: 5000 MT / month Packing: Packed in PP bag 25 kgs each, 26 ton/20DC Payment: L/C at sight or T/T with 50% as a deposit in advance Delivery: 5 days upon receipt of deposit or L/C from bank
Hello my dear customer, Good day to you My name is Clover from Kego Company Limited which is a reliable supplier of Ground Calcium Carbonate. It is being increasingly used in many applications such as: Paper, Paint, Plastics, Ceramic, Crystal, Animal feed, Medicine, Food production. Follows are specification of our products for your information: Physical Analysis Chemical Analysis Whiteness: 98% min CaCO3: 99.46% min Brightness: 96% min Fe2CO3: 0.01% max Hardness: 3 Moh MgO: 0.02% max Moisture: 0.2% SiO2: 0.03% max Oil absorption: 23g/100g CaCO3 Al2O3: 0.02% max Density: 2.65-2.7g/cm3 pH: 8-9 We would like to draw your attention to the following terms of trade: Price: 60 USD/MT Min order quality: 50MT Supply quality: 5000 MT / month Packing: Packed in PP bag 25 kgs each, 26 ton/20DC Payment: L/C at sight or T/T with 50% as a deposit in advance Delivery: 5 days upon receipt of deposit or L/C from bank
Hello my dear customer, Good day to you My name is Clover from Kego Company Limited which is a reliable supplier of Ground Calcium Carbonate. It is being increasingly used in many applications such as: Paper, Paint, Plastics, Ceramic, Crystal, Animal feed, Medicine, Food production. Follows are specification of our products for your information: Physical Analysis Chemical Analysis Whiteness: 98% min CaCO3: 99.46% min Brightness: 96% min Fe2CO3: 0.01% max Hardness: 3 Moh MgO: 0.02% max Moisture: 0.2% SiO2: 0.03% max Oil absorption: 23g/100g CaCO3 Al2O3: 0.02% max Density: 2.65-2.7g/cm3 pH: 8-9 We would like to draw your attention to the following terms of trade: Price: 60 USD/MT Min order quality: 50MT Supply quality: 5000 MT / month Packing: Packed in PP bag 25 kgs each, 26 ton/20DC Payment: L/C at sight or T/T with 50% as a deposit in advance Delivery: 5 days upon receipt of deposit or L/C from bank
We are Kego Company Limited based in Vietnam - a reliable supplier of Ground Calcium Carbonate (CaCO3). It is being increasingly used in many applications such as: paper, paint, plastics, ceramic, crystal, animal feed, medicine, food production. For your information, our CaCO3 powder is made of stones exploited form quarries in Yen Bai province, which is one of the highest sources comparing in Vietnam as well as in the world. We are sure that you will be satisfied with our products thanks to their high purity and brightness. We can guarantee that our products can meet strictest requirements for worldwide exports. Follows are specification of our products for your information: Physical Analysis Chemical Analysis Whiteness: 98% min CaCO3: 99.46% min Brightness: 96% min Fe2CO3: 0.01% max Hardness: 3 Moh MgO: 0.02% max Moisture: 0.2% SiO2: 0.03% max Oil absorption: 23g/100g CaCO3 Al2O3: 0.02% max Density: 2.65 â?? 2.7g/cm3 pH: 8-9 Min order quality: 50MT Supply quality: 5000 MT / month Packing: Packed in PP bag 25 kgs each, 26 ton/20DC Payment: L/C at sight or T/T with 50% as a deposit in advance Delivery: 5 days upon receipt of deposit or L/C from bank
We are Kego Company Limited based in Vietnam - a reliable supplier of Ground Calcium Carbonate (CaCO3). It is being increasingly used in many applications such as: paper, paint, plastics, ceramic, crystal, animal feed, medicine, food production. For your information, our CaCO3 powder is made of stones exploited form quarries in Yen Bai province, which is one of the highest sources comparing in Vietnam as well as in the world. We are sure that you will be satisfied with our products thanks to their high purity and brightness. We can guarantee that our products can meet strictest requirements for worldwide exports. Follows are specification of our products for your information: Physical Analysis Chemical Analysis Whiteness: 98% min CaCO3: 99.46% min Brightness: 96% min Fe2CO3: 0.01% max Hardness: 3 Moh MgO: 0.02% max Moisture: 0.2% SiO2: 0.03% max Oil absorption: 23g/100g CaCO3 Al2O3: 0.02% max Density: 2.65 â?? 2.7g/cm3 pH: 8-9
1. Product Overview VHB Pot Bearings made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268: 2014, AASHTO LRFD: 2007 Section 18, ASTM D 5212 03, BS5400, EN1337, KS4420). VHB Pot Bearings are capable of withstanding high loads, displacements and rotation angles. This type of bearing is suitable for middle-range span structure, continuous bridge structure, etc. with a load capacity of up to 60000kN or above depending on projects requirements. VHB pot bearings have a well-shaped structure, superior design, which are convenient for installation and maintenance during operation. 2. PRODUCT CHARACTERISTICS VHB pot bearings are comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along the horizontal axis. Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding part can be designed to limit or allow the movements as required from the structures. Pot Bearings are divided into 2 main types: Fixed pot bearings and sliding pot bearings. Fixed pot bearings: The bearings only allows the head of structure to have rotary movement and transfer the pressure through a fixed point. Sliding pot bearings: This type of bearings includes Free sliding bearings and Guide sliding bearings, which allows the dead to have both rotary movements and unidirectional or multidirectional movements. To ensure the long-life durability, VHB pot bearings are protected against corrosion by the following methods: painting with two-component epoxy coat, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg coating spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours. 3. PRODUCT INFORMATION Based on the characteristics, VHB pot bearings are divided into 3 types:
SHC GROUP is supplying Calcium Carbonate Powder with high quality (High whiteness & brightness). Calcium carbonate is used for making PAPER, PAINT, PLASTIC, FILLER MASTER BATCH, RUBBER, PVC, COATING. We have uncoated and coated grade. Total capcity is 5,000 metric tons per month. Please contact us for more detail and best price.
SHC GROUP is supplying Calcium Carbonate Powder with high quality (High whiteness & brightness). Calcium carbonate is used for making PAPER, PAINT, PLASTIC, FILLER MASTER BATCH, RUBBER, PVC, COATING. We have uncoated and coated grade. Total capcity is 5,000 metric tons per month. Please contact us for more detail and best price.
