Features: 1, This product is a new type strong stone adhesive, applied to all kinds of low water absorption stone materials like large-scale artificial stones, culture stones, and natural stones 2, No need to wet the brick wall, effectively improve the efficiency 3, Strong bond ability, material-reducing, much safer and firmer than the traditional cement adhesive, also can reduce the construct trash and the quantity of the wall 4, Good anti-acid and anti-alkali and anti-infiltration and anti-aging function 5, Small shrinking rate, no cracking, can be used in cold and humid environment. Application: 1, The adhesive for cement plaster, brick, smooth cement wall paste stone 2, The adhesive for low water absorption surface and light steel frame system board, like gypsum board and Eight board. Surface Treatment: The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials. Operation Process: 1, The ratio: MB tough stone adhesive: water: 3.3: 1 (25kg powder, about 7.5kg water) mixed and stirred into paste, using an electric mixer to make particle paste, put it aside for a few minutes and then a little stirring to gain the better effect 2, Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m2, then push the stone above it 3, For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material. Normal Amount: Coverage areas differ according to the circumstance: 1, using 3*3mm tooth scraper about 1.8kg/m2 2, using 6*6mm tooth scraper about 3kg/m2 3, using 10*10mm tooth scraper about 4.8kg/m2 Note: bricks for wall using 3*3mm tooth scraper or 6*6mm tooth scraper, bricks for floor using 6*6mm tooth scraper or 10*10mm tooth scraper. Cautions: 1, Make sure the smooth and vertical rate of the surface before operation 2, Never mix the dry slurry with water and use again 3, For the painting surface, make sure the initial bond strength and no flake 4, Finishing after 24h can be walked in or fill the crack. Store Method:Store in cool and dry place, unopened product can be saved for one year. 25kg/bag
Features: 1, This product is a new type strong stone adhesive, applied to all kinds of low water absorption stone materials like large-scale artificial stones, culture stones, and natural stones 2, No need to wet the brick wall, effectively improve the efficiency 3, Strong bond ability, material-reducing, much safer and firmer than the traditional cement adhesive, also can reduce the construct trash and the quantity of the wall 4, Good anti-acid and anti-alkali and anti-infiltration and anti-aging function 5, Small shrinking rate, no cracking, can be used in cold and humid environment. Application: 1, The adhesive for cement plaster, brick, smooth cement wall paste stone 2, The adhesive for low water absorption surface and light steel frame system board, like gypsum board and Eight board. Surface Treatment: The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials. Operation Process: 1, The ratio: MB tough stone adhesive: water: 3.3: 1 (25kg powder, about 7.5kg water) mixed and stirred into paste, using an electric mixer to make particle paste, put it aside for a few minutes and then a little stirring to gain the better effect 2, Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m2, then push the stone above it 3, For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material. Normal Amount: Coverage areas differ according to the circumstance: 1, using 3*3mm tooth scraper about 1.8kg/m2 2, using 6*6mm tooth scraper about 3kg/m2 3, using 10*10mm tooth scraper about 4.8kg/m2 Note: the amount is related to the smooth, vertical rate, and thickness of the stone material Cautions: 1, make sure the smooth and vertical rate of the surface before operation 2, never mix the dry slurry with water and use again 3, for the painting surface, make sure the initial bond strength and no flake 4, Finishing after 24h can be walked in or fill the crack. Store Method: Store in cool and dry place, unopened product can be saved for one year. 25kg/bag
Industrial Air Gas-Powered Wheelbarrow Air Compressor - 9 HP Honda Engine, 9-Gallon. The hardworking Industrial Air 9-Gallon Gas-Powered Wheelbarrow Air Compressor is specifically designed for the demanding jobsite performance contractors require. This portable wheelbarrow compressor features a durable cast iron 3-cylinder pump with super high airflow, a reliable Honda GX270 OHV gasoline engine with electric start, cast iron flywheel, easy-access controls and more. Ships with synthetic oil for optimum performance and long life. What's Included : (1) 9 HP, 9-gallon gas-powered wheelbarrow air compressor Features + Benefits : Super High Airflow portable produces 18.1 CFM @ 90 PSI 155 PSI maximum pressure for op timum tool performance Wheelbarrow tank design with two 4.5-gallon tanks High-performance cast iron 3-cylinder oil-lubricated single stage pump Durable 1-piece cast iron crankcase handles tough jobs Durable Swedish stainless steel flex leaf valves Shipped with synthetic oil for optimum performance and long pump life Splash-lubricated oil system for pump Heavy-duty Honda GX270 OHV 9 HP gasoline engine with electric start is reliable, easy-starting and quiet running Engine meets CARB emissions requirements Overhead valve design offers cooler, fuel-efficient operation Cast iron cylinder sleeve provides longer service life Automatic low-oil shutdown Automotive-style air cleaner Integrated battery tray compartment (battery sold separately) Air throttle cylinders 16in. cast iron flywheel is balanced for maximum performance Easy-access controls include regulator with oversized knob, tank and tool pressure gauges Integrated control panel Two 1/4in. quick-connect air outlets run two tools at same time Liquid-filled tool and pressure gauges are easy to read 1/2in. unregulated high pressure port on compressor can connect to H4X remote air hub (sold separately) Oil level sight glass Center mounted tires for jobsite mobility Two wheels side-by-side fit a common 12in. plank Balanced structural support transfers vibration to the ground Easy-grip handles for convenient loading and transport Operating tool capacity (max. users): Framers: 710, Roofers: 1014 Key Specs : Item# 43517 Brand Industrial Air Official acetools-supplies.com Manufacturer's Warranty 24 months consumer / 90 day commercial Ship Weight 360.0 lbs Max. PSI 155 HP 8.5 CFM at 90 PSI 18.1 CFM at 40 PSI 20.6 Engine Honda GX270 OHV Start Type Electric w/recoil backup Engine Displacement (cc) 270 Gross Torque 14.1 ft.-lbs. (19.1 Nm) at 2,500 RPM Engine Idle Control Manual Stage Single Drive Belt Working Pressure (PSI) 155/125 Tank Type Twin horizontal Air Tank Size (gal.) 9 VISIT OUR OFFICIAL WEBSITE FOR FULL DESCRIPTION AND MANY BEST PRODUCT, SPECIAL PRICE.
1)Country of origin: Germany 2)Material: is an asbestos-free gasket material. It consists of aramide fibers, inorganic fillers and other asbestos substitutes that are resistant to high temperatures. 3)Application: for DIN and ANSI flanged joints, apparatus, pumps, fittings and pipelines in industrial plants ; for fittings with very narrow sealing surfaces, e.g. in gas and hot water units, solar panels, convection radiators and couplings, etc. ;for sealed joints in IC engines subject to high mechanical and thermal stress (oil filters, intake manifolds, water, fuel & vacuum pumps, etc.for transmissions, gearboxes, refrigerating & air compressors, etc. ;Since AFM 34 is physiologically safe, it is particularly suitable for use in contact with drinking water & foodstuffs, and for sealing highly pure, pollutant-sensitive products such as paint bases, vitamins, etc. 4)It can be made to specific gasket according to drawing, dimensions supplied, or other arrangement.
Engine type840 cc, v twin, air cooled, diesel Maximum torque41 nm Horse power12kw(3600r/min) 16hp Fuel system Fuel delivery systemglow plugs, fuel stop solenoid energised to run, bosch injectors, forced and splashing lubrication, external oil cooler Fuel consumptionup to 62 miles per gallon Fuel capacity19 litre Drivetrain Final drive4wd, 2wd and differential lock electrically operated Transmissionautomatic (with engine braking) Gear selectionh, l, n, p, r Electrical system Starting systemelectric start Ignition systemself-bleeding fuel system, external electric fuel lift pump, external fuel filter, spin on oil filter, Braking 3 hydraulically operated calliper and disc brakes, one on rear final drive gearbox and 2 fitted to front wheels. Handle bar mounted brake lever (right hand) operates front brakes and foot operated brake pedal activates all three callipers, the two brake circuits are independent. The gear box has a parking position which locks transmission for prolonged parking, the handle bar mounted brake lever has a lever locking system which is suitable for short time parking (hydraulic temporary parking brake) Tires Front tread950 mm (37.4¨¤) Rear tread1003 mm (39.5¨¤) Wheelbase1370 mm (53.9¨¤) Vehicle dimension (l¡¡§¡éw¡¡§¡éh)2208 x 1250 x 1200mm(86.9x49.2x47.2in) Packing size2290¡¡§¡é1300¡¡§¡é815mm(90.2x51.2x32.1in) Iron bracket with carton
Diesel generator 100kw cummins diesel generator Model: cd-c 100kw (silent type) Power by cummins engine Continuous power (50hz): 100kw/125kva Standby power (50hz): 110kw/137kva Engine model: 6bta5.9-g2 Engine power (50hz): 110kw Speed: 1500rpm Engine configuration: 6-cylinder in line. 4-strokes, exhaust gas turbocharged, direct spray fuel system. Engine cooling mode: the radiator suitable for 40¿¼ c temperature, strap drive the cooling fan with protection cover. Speed control system: mechanical speed controller, electricity-magnet valve control switch(optional) Start model: 24v direct current start Engine filter system: dry air filter type, fuel filters, lube filter. Engine total displacement: 5.9l Compress ratio: 17.5: 1 Boreí+ stroke: 102í+ 120 Specific fuel consumption: íG 220g/kw. H Lubricating oil consumption: íG 1.36g/kw. H Oil capacity: 13l Coolant capacity: 27l Alternator model: brushless 100kw Alternator power: 100kw/125kva Rated voltage/frequency: 380v/220v 50hz Power factors: 0.8lag Phase: 3-phase & 4 line Stable voltage regulator: íG í+ 3 Insulation class/protection grode: h class/ip 23 Dimension: 2800í+ 1100í+ 2100 with base fuel tank Weight: 1500kgs
Features: 1. Mixed with cement mortar, improving the bonding strength and flexibility 2. Can be used as booster for the interface treatment agent and tile adhesive 3. Improve the anti-infiltration and waterproof function of cement mortar, and make it suitable for the wet area like swimming pool 4. Anti-aging, non-toxic, safety. Surface Treatment: The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials. Mixed Ratio: 1. For strengthen the bond performance: 50kg cement mortar with 3-5kg additive and appropriate water 2. For outdoor heavy-type ceramic tile adhesive: 5kg mb-01 powder + 1.1kg mb-03 + appropriate water; for indoor heavy-type ceramic tile adhesive: 5kg mb-01 powder + 0.6kg mb-03 + appropriate water; for smooth surface small ceramic tile adhesive: 5kg mb-01 powder + 0.8kg mb0-03 with appropriate water 3. For the interface treatment: 1.0kg mb-01 powder + 0.1kg mb0-03 with appropriate water 4. For the cement mortar leveling: about 2.5kg mb-03 mixed with 50kg cement. Operation Process: 1. The same operation process with mb-01 adhesive when paste various type of tiles and stone materials 2.Cement mortar leveling: according to the above ratio, mixed the mb-03 with cement mortar, then make inserting 3. Interface treatment: for the high water absorption surface, wet the surface at first, then brush the mixed slurry on the surface, control the thickness under 1.5mm, after it dries, doing the paste; for the low water absorption, no wet work, do with the above 4.for the old ceramic tile: a.mixing MB-01 with MB-03 in the rate of 1.1-1.2: 1 for the interface treatment b. after it dries, according to the process using MB-01 to operate directly c. or use MB-01 directly for the old wall retreating. Cautions: 1. The mortar that attached to the surface should be clean before it dry 2. Operating under 5¡æ~40¡æ situation 3. Finished after 24h, can be walked or fill crack 4. For the old surface retreating, clean the loosen or flake ceramic tile at first. Technical Reference: Coverage area(amount). Technical reference 1, for ceramic tile and stone: A, mixed cement about 0.7kg/m2; B, mixed MB-01 0.4-0.6kg/m2; adjust time(20¡æ): about 10min cool time(20¡æ): about 10min 2, for interface treatment: about 0.15kg/m2 when dry, anti-weak acid and oil resistance 3, for cement mortar leveling: about 0.1kg/m2 Improve the cement bonding strength: 80%(14days). Store Method: Store in cool and dry place, unopened product can be saved for one year. 25kg/bag
Hot sale!!! wpc decking flooring board for outdoor decking or gardon flooring or dock decking area Water resistance wpc floor, wpc flooring. High quality, ce certificate, wood plastic composite decking Product information Or the harsh elements and stands up to heavy foot traffic. Features: 1.With natural wood grain and looks like nature wood, less timber problems. 2.Approx. 90% recycled materials, environmental friendly, saving forest resources. 3.No paint, stain or oil required, low maintenance. 4.Weather resistant, suitable from ¡§c40¡ãc to 60 ¡ãc. 5.Resistant to termite and insect attack, will not split, rot or warp. 6.Easy to install and low labor cost. 7.Cutting and drilling like timber. 8.Six standard colors, standard length 2.2m or 3.6m, custom length available. Technical data Slip resistance: Boards of woodedtech according to astm d2394-05. This is the best ranking for bare-foot slip resistance. Weathering resistance: Boards of woodedtech have very low moisture uptake.This is key for mold and mildew resistance. Uv resistance: 4000 hours accelerated xenon-arc exposure, the boards turned slightly more clear and colored. Abrasion resistance: The resistance to abrasion is similar to oak. Fungus resistance: Whatever fungus the wood composite is exposed to, it is extremely durable. Moreover, aging test does not affect this durability. Applications Outdoor decking, wpc floor, fencing, railing & trim garden, lawn, balcony, corridor, garage, pool & spa surrounds, boardwalk, outdoor fencing, customs pallet, gate & playground. Packaging & delivery Packaging details: 2.2m/pcs, 144pcs in one pallet which packed with white plasitc membrane. One 20gp can load about 700sqm include all the accerssories. Delivery detail: Within 15days after the deposit received
Detailed Product Description 1.Automatic making chains rolling and welding 2.High speed 200~300pcs/ min ,250M/Day 3.Metal chains making machine Automatic jewelry chain necklace weaving machine 1.Full- automatic in-line welding machine ,no need to add any welding material . 2.The photo belowed is suit to weave the materials in 0.25--0.8.such as:iron,stainless steel,gold,alloy Automatic jewelry chain necklace weaving machine is apply to* full automatic weave and conduct automatic welding process synchronous connector online for the materials of stainless steel, iron, silver and gold ,solder joints smooth, beautiful, dissolve deep and large, Intensity height, and the machine have a variety of sensors, it can reply the likely situation in the whole process, they all automatically lay off and give an alarm, point out the worker dispose it promptly: When the material have lost, automatically lay off and give an alarm. When the material nutrients and chucking In the process,the machine will automatically lay off and give an alarm. When the chain could not connect (Workpiece drop), the machine will automatically lay off and give an alarm. Thought stochastic specialized the change of replacement parts,the same size machine can knit different kinds of necklace ,such as: (1) One-button cross. (2) One-button side(single circle turn 45¡ã). (3) Cross double buckle(Each circle all the other two circles cover). (4) Cross double side buckle.etc..many kinds * All transmission oil pump automatic machine with fuel supply system, the mechanical operation process in the coverage of all the oil, it make the mechanical life prolonged, keep continuous high precision automatic operation, this model has set up a file in the nearly 10 years of practical production process of operation, be confirmed is very outstanding. 4.When need to weave the chains in different wire diameter, it can through the change of different specification column cage to achieve(Random with any one , small type line diameter specification 0.3 --0.8 mm, big models in 0.6-- 1.8 mm specifications from one of the specification). Production speed: according to the different materials,diameter,kinds, every minutes between 200-300 piece, weaving and not only in welding, speed can be up to 400 piece/min) Equipment constitute: It include five parts :plasma welding machine, chain make up forming, synchronization small dish, the machine base, gas control system. plasma welding machine, is located in the top of the whole machine, self-contained , it can use on manual welding, with the woven chain machine synchronous matching, it can complete welding automatically, by controlling the system to provide the welding synchronous signal, complete online welding, for the long-term use of welding of strengthening improvement, and for the flyer diameter welding of the small current fine-tuning top-ranking result, adjust the precision and high stability,easy to get consistent welding parts exterior effect, and endure China southern production environment of high temperature and high humidity, the power supply voltage change range's extreme environment test. For the convenience of production of metering, the machine has the function of production volume, when the production quantity to the default value, the equipment will halt automatically. Full English dot matrix liquid crystal display interface. 2.Necklace knitting machine, is located in the central part of the whole machine, self-contained, it can alone to be automatic chain weaving function, with the welding machine synchronous matching, it can realize online automatic welding. The machine include automatic tension material put rack, electric pump injection lubrication and filtration system, lighting, manual machine commissioning handle, column cage (mold). The chain detection sensor, gravity detection sensor, the main operating control key, (driving) compressed air pressure to adjust and flow monitoring, adjust the argon gas detection, auxiliary gas flow test and adjust, knitting speed digital display, knitting speed stepless adjusting system, battery main switch etc.. the main part is made of aluminum alloy die casting process one-piece processing, it can fully guarantee the whole machine prevision and strength, mechanical parts are made of CNC machining center to ensure that the data with the accurate. 3. Material receiving turntable, is located in the central part of the base, self-contained, through the signal and the central control system is connected, can with the speed of the machine and the woven chain realize synchronization, (no need for additional manual adjustment, the factory has adjusted by the computer security, synchronization) Why the synchronization material receiving- - -because in the weaving machine woven chain process each circle after connected for 45¡ã, that is once increase is a circle, the chain turned 45¡ã, in turn stack, wheel rotation direction and speed just offset Angle and the process of woven chain speed, to prepare for the next plastic process. Main Technical specifications: * The power supply voltage: 220 VAC (according to local demands) * The power supply current: 3.5 A * The power consumption: 700 w * Compressed air flow (about): 0.025 m/min (quite 1 HP air compressor can drive 4 a woven chain machine. * Argon gas consumption: H1400mm phi 200 mm argon bottle filled (13 Mbar) can connect six braiding machine work for 24 hours on 6 days. stainless steel Language Option Switch languge to help reading: French German Italian Russian Spanish Portuguese Korean French . German Italian Russian Spanish Portuguese Korean ÈÕ±¾ÕZ Automatic Jewelry metal chain making / welding machine.
Automatic oil filling system automobile Air Conditioning compressor 1.6L 16V 2005 - 9520164JA0 H09A0AN4AB ID:HY-AC4469 Specification: Compressor type: Clutch diameter : 110mm Belt-Type: 4pk Refrigerant: R134a Voltage: 12V OEM 9520164JA0 H09A0AN4AB 95200-64JA1 9520064JA1
Industrial Equipment Rotary Screw air compressor 4kw-75kw oil lubricated electric type 8kg for sale
Car care products, paint remover, waterproof spray, brake fluid, anti rust lubricant, dashboard polish, fuel injector cleaner, tire shine, car shampoo.
Two models: XKSF180-2DN;XKSF150-2DN Two Dimensions(mm):4030X2690X3380;4030X2390X3380 Two capacities of soybean(Tons/day):250;200 Two capacities of meal (T/D):2500;2000 Product Description: - Excellent drive system, more efficient, less energy consumption. - Smaller floor areas occupy, high screening efficiency. Greatly saves workshop space. - Universal joint suspension structure, stronger endurance, moves more stably and reliably. - Heavy-duty machine frame, strong and durable. - Advanced oil lubricating system, can lubricate without machine stop. - High-quality wood screen frame, lightweight for replacing easily. - High bouncing balls prevent screen from block effectively.
Non dairy creamer is a high quality, emulsified spraydried, emulsified, white or yellow power mainly made from glucose syrup and vegetable oils mixed under emulsification and spray drying ,it is with good water solubility, more milk powder, uniform liquid cream form is formed in the water. NDC can improve the internal organization of food, incense toughening fat, is a delicate taste, lubrication thick, so it is the good for coffee mate, milk tea instant oatmeal, cakes, biscuits ,ice cream cold/acid beverage,milk replacer,fat filled milk powder,chesse powder and so on.
Non dairy creamer is a high quality, emulsified spraydried, emulsified, white or yellow power mainly made from glucose syrup and vegetable oils mixed under emulsification and spray drying ,it is with good water solubility, more milk powder, uniform liquid cream form is formed in the water. NDC can improve the internal organization of food, incense toughening fat, is a delicate taste, lubrication thick, so it is the good for coffee mate, milk tea instant oatmeal, cakes, biscuits ,ice cream cold/acid beverage,milk replacer,fat filled milk powder,chesse powder and so on.
Pudding powder, ice cream powder, fat powder made by non dairy creamer is a high quality, emulsified spraydried, emulsified, white or yellow power Mainly made from glucose syrup and vegetable oils mixed under emulsification and spray drying , it is with good water solubility, more milk powder, uniform liquid cream form is formed in the water. Ndc can improve the internal organization of food, incense toughening fat, is a delicate taste, lubrication thick, so it is the good for coffee mate, milk tea instant oatmeal, cakes, biscuits , ice cream cold/acid beverage, milk replacer, fat filled milk powder, chesse powder and so on.
Foaming creamer,gold soluble non dairy creamer is a high quality, emulsified spraydried, emulsified, white or yellow power mainly made from glucose syrup and vegetable oils mixed under emulsification and spray drying ,it is with good water solubility, more milk powder, uniform liquid cream form is formed in the water. NDC can improve the internal organization of food, incense toughening fat, is a delicate taste, lubrication thick, so it is the good for coffee mate, milk tea instant oatmeal, cakes, biscuits ,ice cream cold/acid beverage,milk replacer,fat filled milk powder,chesse powder and so on.
Acidproof non dairy creamer is a high quality, emulsified spraydried, emulsified, white or yellow power Mainly made from glucose syrup and vegetable oils mixed under emulsification and spray drying , it is with good water solubility, more milk powder, uniform liquid cream form is formed in the water. Ndc can improve the internal organization of food, incense toughening fat, is a delicate taste, lubrication thick, so it is the good for coffee mate, milk tea instant oatmeal, cakes, biscuits , ice cream cold/acid beverage, milk replacer, fat filled milk powder, chesse powder and so on.
Non dairy creamer for milk tea,coffee mate is a high quality, emulsified spraydried, emulsified, white or yellow power mainly made from glucose syrup and vegetable oils mixed under emulsification and spray drying ,it is with good water solubility, more milk powder, uniform liquid cream form is formed in the water. NDC can improve the internal organization of food, incense toughening fat, is a delicate taste, lubrication thick, so it is the good for coffee mate, milk tea instant oatmeal, cakes, biscuits ,ice cream cold/acid beverage,milk replacer,fat filled milk powder,chesse powder and so on.
Cereal .oatmeal non dairy creamer is a high quality, emulsified spraydried, emulsified, white or yellow power mainly made from glucose syrup and vegetable oils mixed under emulsification and spray drying ,it is with good water solubility, more milk powder, uniform liquid cream form is formed in the water. NDC can improve the internal organization of food, incense toughening fat, is a delicate taste, lubrication thick, so it is the good for coffee mate, milk tea instant oatmeal, cakes, biscuits ,ice cream cold/acid beverage,milk replacer,fat filled milk powder,chesse powder and so on.
