Paraffin wax is a translucent soft solid commonly referred to as wax. It is extracted from petroleum and burns readily. Paraffin Wax is used for several purposes. Paraffin wax is a white or colorless soft solid derivable from petroleum, coal or oil shale, that consists of a mixture of hydrocarbon molecules containing between twenty and forty carbon atoms. These waxes are categorized by oil content and the degree of refinement. Application: Candle manufacture, wax paper, polishes, cosmetics, electrical insulation assist in extracting perfume from flowers, medical ointment, Pharmacy, Batteries, Paint and varnish removers, waterproof coat for wood, match industry, Corrosion inhibitor, food and chocolate polishing, PVC lubricant. some factories mix paraffin wax 3-5% with 1-1.5% to receive a better quality. Packing: 25kg Carton Box Item Specification Melting Point: 58 -64C Oil Content: 1%- 5% Colour: Off White Flash point: 250 C
Toluene is also known as toluol. It is a colorless clear aromatic hydrocarbon with the formula C7H8, it is also referred to by the name methyl benzene. Toluene occurs naturally at low levels in crude oil and is a byproduct in the production of gasoline by a catalytic reformer or ethylene cracker. It is also a byproduct of the production of coke from coal. Toluene is used across several industries for various applications. It is predominantly used as an appreciable solvent. Application: As a solvent, toluene can be used in paints, paint thinners, adhesives, inks, resins, cleaning agents, leather tanners and inks. It can also be used to manufacture polymers that produce nylon, plastic soda bottles and for pharmaceuticals, dyes and cosmetic products. Toluene is also used as a coolant in sodium cold traps underneath nuclear reactor loops. Packing: 220 kg Drum, IBC, ISO Tank, Flexi bag. Item Specification Purity (GC): 99.9 % Identity (IR): conforms Evaporation residue: 2.0 mg/l Water: 0.05 % Acidity: 0.0002 meq/g Alkalinity: 0.0006 meq/g Transmission (at 300nm): 70 % Transmission (at 310nm): 80 % Transmission (from 350nm): 98 %
Diethylene glycol is an organic compound. It is a colorless, practically odorless, poisonous, and hygroscopic liquid with a sweetish taste. It is miscible in water, alcohol, ether, acetone, and ethylene glycol. Compared to MEG, it has a higher boiling point, viscosity and specific gravity. Application: Polyester resins, polyurethanes, plasticizers, Antifreeze additive, Unsaturated polyester resins, Softening Agent, Solvents Coupler, Heat transfer agents or fluids, Chemical intermediates etc. Packing: 220 kg Drum, IBC, ISO Tank, Flexi bag. Item Specification Appearance : colorless Purity: 99.8 wt % min MEG: 0.05 wt % max TEG 0.05 wt %: max Water: 0.05 wt % max Colour (pt-Co): 10 max Specific Gravity, 20/20 C: 1.1175-1.1195 5% vol: Min 242 C 95% vol: Max 250 C Acidity (as acetic acid): 50 mg/kg max Ash: 50 mg/kg max
Mono Ethylene Glycol MEG is a clear, colourless, virtually odourless, and slightly viscous liquid. It is miscible with water, alcohols, and many organic compounds, and has the molecular formula C2H6O2, CAS: 107-21-1. It has a specific gravity of 1.115 and a flash point of 110°C. Application: It is an important raw material for industrial applications. MEG is utilized in the manufacture of polyester (PET) resins, films, fibers, antifreezes, coolants, aircraft anti-icer and deicers and solvents. It is also utilized as raw material for paper industry, polyester Resins, adhesives and inks, chemical Intermediates, Heat Transfer, Fluids. Packing: 220 kg Drum, IBC, ISO Tank, Flexi bag Item Specification Appearance Clear Colourless MEG Content Wt % min: 99.9 DEG Content Wt % min: 0.04 Specific Gravity @20/20 Deg C: 1.1151-1.1156 Water Wt. % max: 0.04 Colour (before heating) Pt-Co Units Max.: 5 Acidity (as acetic acid) Wt.ppm Max.: 10 Chlorides (as CL) Wt.ppm Max.: 0.1 Sulphates Nil Iron Wt.ppm Max.: 0.1 Ash Wt.ppm Max.: 10 Aldehydes (as ormaldehyde) Wt.ppm Max.: 10
Linear Alkylbenzene (LAB) is a raw material of an important anionic surfactant, Alkyl Benzene Sulfonate, widely used in daily chemical washing, textile auxiliaries, industrial cleaning, printing and dyeing, electroplating, leather and paper industry etc. LAB can also be used in lubricating oil, capacitor oil, part of the solvent etc. Application: LABs are used to produce linear alkylbenzene sulfonate (LAS) which is a biodegradable surfactant & has great cleaning properties and as such, it is an important component of detergents and cleaning solutions. Packing: Standard export neutral packing in Tanker, Bulk chemical carrier, Flexibag etc. Item Specification Appearance (visual): Clear & Bright Specify Gravity (15.5/15.5 °C): 0.85- 0.88 Bromine Index (Br2.mg/100g): 15 max Saybolt Color: +30 min Refractive Index (20 °C): 1.480- 1.485 Water Content (wt.ppm): 200 max Dialkyltetralin (wt.%): 1 max Paraffin Content (wt.%): 0.4 max Monoalkylbenzene Content (wt.%): 98.6 min C9 & lighter: 1 max C10: 6- 16 C11: 28- 39 C12: 25 - 40 C13: 10 - 30 C14 & heavier: 2 max Average Moleculer Weight: 238 - 250 2-phenyl isomer (wt.%): 15 min
Liquid ammonia / anhydrous ammonia (NH3) is an important chemical raw material with a wide range of applications. Liquid ammonia can be used as a refrigerant. It is mainly used to produce nitric acid, urea and other chemical fertilizers, and can also be used as a raw material for medicine and pesticides. In the defense industry, it is used to make propellants for rockets and missiles. Application: Agriculture Industry, Pharmaceutical Industry, Textile Industry, Refrigerant, Defense Industry etc. Packing: 100Ltr Cylinder, 800Ltr Cylinder, ISO Tank Item Specification Purity: 99.5 % Oil (Max): 0.02 % Moisture (Max): 0.5 % Residue On Evaporation % By Volume: 0.05 % Pyridine: Nil Napthanlene: Nil Phosphic: Passes Test Sulphur Compounds: Passes Test
Glacial acetic acid (CH3COOH) is commonly used as analytical reagents, general-purpose solvents, non-aqueous titration solvents, chromatographic analysis reagents, and organic synthesis. used for the synthesis of vinyl acetate, cellulose acetate, acetate, metal acetate and halo-acetic acid. It is also an important raw material for pharmaceuticals, dyes, pesticides and organic synthesis. Application: Mainly used in the production of vinyl acetate monomer, then acetic anhydride and ester production. Packing: 30kg Drum, 215kg Drum, 1000 Kg IBC, ISO Tank. Item Description Acetic acid: Min. 99.8% Color(APHA),Pt-Co: Max. 10 Acetaldehyde: Max. 0.05% Formic acid: Max. 0.06% Water: Max. 0.15% Iron(Fe): Max. 0.0004% Residue after evaporation: Max. 0.01% Permanganate: Min. 30min
Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, or deep purple to rusty red. The iron is usually found in the form of magnetite (Fe3O4, 72.4% Fe), hematite (Fe2O3, 69.9% Fe), goethite (FeO(OH), 62.9% Fe), limonite (FeO(OH)n(H2O), 55% Fe) or siderite (FeCO3, 48.2% Fe). Ores containing very high quantities of hematite or magnetite (greater than about 60% iron) are known as natural ore or direct shipping ore, meaning they can be fed directly into iron-making blast furnaces. Iron ore is the raw material used to make pig iron, which is one of the main raw materials to make steel 98% of the mined iron ore is used to make steel. Item Specification Fe: 57 Min SiO2: 4 Max Al2O3: 5.5 Max Moist: 12 Max P: 0.08 Max S: 0.04 Max +40mm: 5 Max -6mm: 20 Max LOI: 7 About TI: 70 Min AI: 15 Max RI: 60 Min RDI: 25 Max DI: 10 Max
In its mineral form Bauxite, Aluminium is the most abundant metal in the earth's crust. Bauxite contains one of a variety of hydrated aluminium oxides (gibbsite, boehmite or diaspore), which are often expressed as Al2O3xH2O but are more commonly regarded as impure Al2O3. Bauxite is claylike and earthy, and ranges in colour from white to deep brown or red according to the nature and quantity of its components. The major impurities in Bauxite are iron oxides (goethite & hematite), silicon dioxide, the clay mineral kaolinite as well as small amounts of anatase (TiO2). Consequently, its composition varies considerably with alumina constituting from about 50% to about 70%. Aluminium content can be accurately and precisely determined over a broad analytical range simultaneously along with Si, Fe, Mn, Ti, Zr and up to 20+ other elements. Item Specification Color: Brown, yellow / light red Granularity: 0-1/1-3/3-5/5-8 mm, 200/325 mesh Application: Aluminium/Precision Casting/Refractory Density: 4.3 g/cm3 Hardness: 1-3 Fe2O3 Content: 3.0% Max CaO Content: 0.2 Max Package: 25 kg/bag Payment terms: T/T L/C
Zinc ore is most commonly found as zinc carbonate (ZnCO3), known as calamine or smithsonite. It generally occurs as rounded, crystalline crusts or granular, honeycombed masses that have a vitreous or pearly luster and are typically dirty brown or grey in colour. Zinc is a chemical element with the symbol Zn and atomic number 30. Zinc is a slightly brittle metal at room temperature and has a shiny-greyish appearance when oxidation is removed. It is the first element in group 12 (IIB) of the periodic table. In some respects, zinc is chemically similar to magnesium: both elements exhibit only one normal oxidation state (+2), and the Zn2+ and Mg2+ ions are of similar size. Zinc is the 24th most abundant element in Earth's crust and has five stable isotopes. The most common zinc ore is sphalerite (zinc blende), a zinc sulfide mineral. The largest workable lodes are in Australia, Asia, and the United States. Zinc is refined by froth flotation of the ore, roasting, and final extraction using electricity (electrowinning). Item Specification LE: 60.244% Zn: 32.767% Pb: 4.403% Fe: 2.244% Ti: 0.225% Hf: 0.073% V: 0.03% Zr: 0.014% Moisture: >3
The main copper sulphide minerals are chalcopyrite (CuFeS2) chalcocite (Cu2S), covellite (CuS), bornite (Cu5FeS4), tetrahedrite ((Cu,Fe)12Sb4S13) and enargite (Cu3AsS4). The largest source of copper is from porphyry ore deposits in which one or a combination of the minerals occurs. A typical copper sulphide ore contains various levels of iron sulphide types that generally include pyrite (FeS2) and pyrrhotite (Fe1-xS). Often gold and silver are present which may either be associated with the sulphides or are free. The gangue particles can consist of a range of silicate minerals from quartz to talc and clays. Item Specification CR2O3: 42% Basis: 40% Min CR/FE Ratio: 1.35:1 MGO: 14% Max AL2O3: 16% Max SIO2: 10% Max P: 0.01% Max S: 0.01% Max Size 0-2 MM: (95% Min) Moisture at 105C or 110C: 8% Max
Dead burned magnesite 97% is a chemical substance, which means that when magnesite is calcined at 1800C, carbon dioxide completely escapes, and magnesium oxide forms a dense block of periclase. This dead burned magnesite has a high degree of fire resistance. Its main component is magnesia, which is made of natural special magnesite magnesia through flotation purification, light burning, fine grinding, high pressure ball pressing, and ultra high temperature oil shaft kiln calcination. Application: Dead burned magnesite 97% are made from sorted super grade natural magnesite through sections including float concentration, calcination, fine grinding, high pressure briquetting and ultra high temperature sintering in heavy oil shaft kilns. They are good quality materials for making magnesia bricks and monolithic refractories. Packing: Jumbo bag(or according to the customer requirement)
When naturally occurring magnesium carbonate(magnesite) is fired at around 800-1500 it becomes what is known as ''caustic calcined magnesite''. The resulting magnesium oxide grains have the outer form of the magnesium carbonate and depending on the firing temperature are porous and more or less reactive due to their large inner surface area. It's also called industrial grade caustic calcined magnesite Application: In the production of magnesium salt, MgO oxide is used as raw material to react with acid. In Refractory, Mgo is used as the Refractory of crucibles. In energy plants, MgO is used to remove sulfur trioxide that are harmful to plants and the environment. In the rubber and plastic industry, Mgo is used as Filler, acid acceptor, anti-coking component and curing acid. Packing: 50kg pp bag with PE coating outside/ PE inner bag, 1250kg Jumbo bag.
Gypsum powder is a superior construction material due to its ability to create an extremely comfortable and aesthetic ambience. It is a natural material, completely odourless, and is easily available in nature. Gypsum is a material that possesses a natural mechanism to perfectly balance indoor climate and humidity. There are a lot of exceptional features of gypsum products that make them perfect for indoor finishing. Gypsum products are environment-friendly and fire-resistant. We offer thermal as well as acoustic insulation. Application: Gypsum panel or building plasters, mould or statutes, grout of marble, clay and ceiling tiles, color additive and also act as an additive to other products. Packing: 25kg, 50kg and 1000kg jumbo bag. Item Specification Color White Initial Setting Time: Minutes 8- 12 Final Setting Time: Minutes 13 -18 Water Stucco Ratio %: 70 - 75 Compressive Strength: N/mm2 15 - 17 Flexural Strength N/mm2: 5 - 6 Fineness %: 200 mesh Sieve pass > 96 CASO4H2O %: > 97 Sodium Chloride %:
Quicklime (or calcium oxide or burnt lime) is obtained by calcining pure limestone at temperature above 9000C. This highly reactive product is essential to many industrial processes. Calcium oxide (CaO), commonly known as quicklime or burnt lime, is a widely used chemical compound. It is a white, caustic, alkaline, crystalline solid at room temperature. The broadly used term lime connotes calcium-containing inorganic materials, in which carbonates, oxides and hydroxides of calcium, silicon, magnesium, aluminium, and iron predominate. Application: Steel Making, FGD, Construction, Masonry & Mortars, Water Treatment, Chemical Processes, Mining Industry, sugar industry, Paper, Pulp and PCC, Remediation of Sludges and Wastes and Glass Manufacturing. Packing: 1000kg Jumbo bag. Item Specification CaO: 92.5% ± 2 Loss on Ignition at 1000 °C: 4% ±2 Grain Size: 10- 60 mm Reactivity: High
PVC resin is a polymer compound formed by polymerization of vinyl chloride monomer (VCM), and its structure unit is [CH2-CHCL]n. polymerization degree is usually 590-1500. According to the content of residual polyethylene monomer in PVC resin can be divided into: industrial grade, food hygiene grade and medical grade. The appearance of PVC resin is white powder. PVC resin SG3 SG5 SG8 is flame-retardant (flame retardant value above 40), high chemical resistance (resistant to concentrated hydrochloric acid, 90% sulfuric acid, 60% nitric acid and 20% sodium hydroxide), mechanical strength And the advantages of good electrical insulation. But its heat resistance is poor, with a softening point of 80�°C, it starts to decompose and change color at 130�°C, and precipitate HCI. Application: It is widely used in the production of polyvinyl chloride boardy leatheroid, paint and adhesive agents, paint and adhesive. Packing: 25kgs two layers draft paper bag or 1000kgs PP bag.
ELTEE DMCC is known for its Top Quality Potassium Sulphate (water soluble) NPK - 00:00:50. We supply our products to 17 reputed countries of World and our product is well accepted by our valuable buyers. About Product : Potassium Sulphate is a high-grade potassium fertilizer containing high Sulphur, high Potassium, and low Chlorine. It is mainly used for grapes, citrus, flowers, tobacco and anaerobic crops. It is also used for cutting and cultivating delicate crops (such as greenhouse cultivation, hydroponic crops, etc.) considered as a premium fertilizer. Packing: 25kg bags, 50kg bags, 1200kg jumbo bags, and customer's marking bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Appearance : White Powder K2O %: Min 50.0 Chloride (as Cl) %: Max 1.0 Moisture %: Max 0.5 Sulphur: Min 18.0 pH Value (1% Solution): 2-3 Insoluble Matter: Max 0.3 Sodium: Max 0.4 Na as NaCL: Max 1.1 Appearance : White free flow powder.
Potassium Sulphate is a high-grade potassium fertilizer containing high Sulphur, high Potassium, and low Chlorine. It is mainly used for grapes, citrus, flowers, tobacco and anaerobic crops. It is also used for cutting and cultivating delicate crops (such as greenhouse cultivation, hydroponic crops, etc.) considered as a premium fertilizer. Packing: 25kg bags, 50kg bags, 1200kg jumbo bags, and customer's marking bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Appearance : White Powder K2O %: Min 50.0 Chloride (as Cl) %: Max 1.0 Moisture %: Max 0.5 Sulphur: Min 18.0 pH Value (1% Solution): 2-3 Insoluble Matter: Max 0.3 Sodium: Max 0.4 Na as NaCL: Max 1.1
Eltee DMCC is the top leading suppliers of Soda Ash Dense in the world. We supply Soda Ash Dense to all the major galss manufacturers of the world. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Physical Properties: * Sodium Carbonate (Na2Co3)% : 99.5% Min * Bulk Density : Ib./ft3 : 62.4 - 68.6 * GPL : 1000 - 1100 Chemical Properties: * NaCl Weight % : 0.04% Max * Si02% : 0.03 Max * Organic Matter as C% : 0.01% Max Product Usage : * Glass Industries * Chemical Intermediates * Soap and Detergent formulations * Water Treatment * Flue Gas Desulfurization * Pulp and paper