Potassium Humate is extracted from natural high grade Leonardite. It is a high-quality plant stimulant and soil conditioner and can be applied in landscape and garden as well as for all agricultural and horticultural plants. It also could stimulate seed germination. With high concentration of humic acid, it could be stored and transported easily. Its solubility is excellent, could be formulated by different fertilizers and pesticides. Packing: 25kg bags, 50kg bags, and customer's marking bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Humic Acid: 60-70% K2O: 8-16% Water Solubility: 95-100% Size: 50-100 mesh
This product is mainly composed of 18 amino acids as well as more than ten kinds of trace elements like zinc, copper, manganese, iron and boron, etc. It is of no toxicity and pollution. Amino acids 28%, chelated trace elements (Fe+Cu+Mn+Zn+B+Mg) 10% This product is all chelated organic trace elements, the absorptivity of which is 2~4 times higher than the inorganic trace elements. Packing: 25kg bags, 50kg bags, and customer's marking bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Appearance: Light Yellow Powder Total Amino Acid: 40% (NH4)2SO4: 50% pH: 5-6
Soda ash light is very well suited for detergent and chemical applications. Sodium carbonate (Na2CO3) is widely used as an alkaline support and for pH regulation. It is also commonly used as a source of sodium and for water softening applications. Usage: Paper-manufacturing, textile, dyeing, synthetic detergent, soap, tiles, ceramics and glazes. Packing: 50kg bags, 1250kg jumbo bags. Items Specification Sodium Carbonate (Na2Co3) %: Min 99.2 Chloride in terms of (NACL) %: Max 0.4 Iron (Fe+2) %: Max 0.002 Insoluble in water %: Max 0.1 Bulk Density, gr/cm3: 0.55- 0.65 Na2o %: Max 58 Particle Size 180UM Sieve Remaining: 70% Min
Soda ash dense is the grade preferred for glass manufacture because its granular properties make it widely dust-free and reduce the risks of segregation during transport and handling. Sodium carbonate (Na2CO3) is used in the glass and silicate industries and also in metallurgy for its sodium oxide content (Na2O) and for its properties as a flux. It is also widely used as an alkaline reagent for the neutralization of acids and mineral or organic acid salts. Usage: Mainly used in the glass manufacturing and crystal production industries as a melting aid. Packing: 50kg bags, 1200kg jumbo bags. Item Specifications Sodium Carbonate (Na2Co3) %: Min 99.2 Chloride in terms of (NACL) %: Max 0.4 Iron (Fe+2) %: Max 0.004 Insoluble in water %: Max 0.1 Bulk Density, gr/cm3: 0.85 1.1 Na2o %: Max 58 Particle Size 180UM Sieve Remaining: 70% Min
Industrial Urea AdBlue Urea is a raw material used in the manufacture of many chemicals, such as various plastics, urea-formaldehyde resins and adhesives. It is also essential for making feedstock, glue, fertilizer, commercial products, and in resin production. Automotive Grade Urea (AGU) is a white, solid, cylindrical pellet. It is manufactured by compressing pure urea crystals in a pelletizing process which avoids the melting and heating of the urea where the majority of biuret is formed. It is an organic amide molecule containing 46% nitrogen in the form of amine groups. Urea is infinitely soluble in water and is a benign and safe chemical to handle. This product contains NO formaldehyde. Packing: 50kg bags, 1000kg / 1200kg jumbo bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Items Specification Total Nitrogen (%): 46.4 Moisture (%): 0.7 Biuret (%): 0.75 Alkalinity (%): 0.1 Aldehyde (mg/kg): 10 Insoluble matter (mg/kg): 25 PO4 (mg/kg): 1.0 Ca (mg/kg): 1.0 Fe (mg/kg): 1.0 Cu (mg/kg): 0.5 Zn (mg/kg): 0.5 Ni (mg/kg): 0.5 Cr (mg/kg): 0.5 Mg (mg/kg): 1.0 Na (mg/kg): 1.0 K (mg/kg): 1.0 Al (mg/kg): 1.0 Appearance: Granular or crystalline No mechanical impurities
Melamine is an organic compound that is often combined with formaldehyde to produce melamine resin, a synthetic polymer that is fire resistant and heat tolerant. Resin is a versatile material that has a highly stable structure. Melamine can be easily molded while warm but will set into a fixed form, which makes it suitable for certain industrial applications. This compound is considered safe for its normal uses, but food products that are contaminated with it can be unsafe for consumption. Application: Melamine is mainly used for high-pressure decorative laminates such as Formica, melamine dinnerware, kitchen worktops, furniture, laminate flooring, adhesives for board materials such as particle board (chipboard), MDF (medium-density fibreboard) and plywood, oriented strand board (OSB) and laminated veneer timber (LVT). Packing: 25kg bags, 50kg bags, 1000kg jumbo bags. Item Specification Appearance: Fine, white crystalline powder Melamine, % by weight: 99.8 min Ash, % by weight: 0.01 max Moisture, % by weight: 0.1 max Screen analysis % on 40 mesh % thru 325 mesh: 1.0 max 35.0 max Color, APHA: 15 max
Dimethyl Formamide Dimethylformamide (DMF) is a clear, colorless, hygroscopic liquid with a slight amine odor. The solvent properties of DMF are particularly attractive because of the high dielectric constant, the aprotic nature of the solvent, its wide liquid range and low volatility. It is frequently used for chemical reactions and other applications, which require a high solvency power. The product is known as a universal solvent. The high solubility of polyacrylonitrile in DMF, together with the good miscibility of DMF in water makes DMF the preferred solvent to produce acrylic fibers. Also, the spinning of polyurethane based elastomers is performed from DMF based solutions. Another significant application is the use of DMF as a solvent for polyurethane-based coatings on leather and artificial leather fabrics. Application: It is used in the chemical industry as a solvent, an intermediate, and an additive; for example, in the production of pharmaceuticals, synthetic fibers, resins, agrochemicals, petrochemical industry etc. Packing: 190kg Drum, IBC, ISO Tank, Flexi Bag.
Titanium dioxide, also known as Titanium (IV) or Titania, is a simple inorganic compound produced as a pure white powder with the molecular formula TiO2. Generally, it is available in two main crystal forms, which are rutile and anatase. Anatase is economical, easily dispersed in water-based systems, and a perfect opacifier. Untreated titanium dioxide (anatase) has TiO2 with a refractive index of 2.55. However, it is not commonly used in exterior (weather-exposed) paint applications except for highway paints. Application: Paint and Coating Industry, Paper Industry, Cosmetics Industry, Food Industry, Plastic Industry etc. Packing: 25 kg PP Bags
Paraffin wax is a translucent soft solid commonly referred to as wax. It is extracted from petroleum and burns readily. Paraffin Wax is used for several purposes. Paraffin wax is a white or colorless soft solid derivable from petroleum, coal or oil shale, that consists of a mixture of hydrocarbon molecules containing between twenty and forty carbon atoms. These waxes are categorized by oil content and the degree of refinement. Application: Candle manufacture, wax paper, polishes, cosmetics, electrical insulation assist in extracting perfume from flowers, medical ointment, Pharmacy, Batteries, Paint and varnish removers, waterproof coat for wood, match industry, Corrosion inhibitor, food and chocolate polishing, PVC lubricant. some factories mix paraffin wax 3-5% with 1-1.5% to receive a better quality. Packing: 25kg Carton Box Item Specification Melting Point: 58 -64C Oil Content: 1%- 5% Colour: Off White Flash point: 250 C
Toluene is also known as toluol. It is a colorless clear aromatic hydrocarbon with the formula C7H8, it is also referred to by the name methyl benzene. Toluene occurs naturally at low levels in crude oil and is a byproduct in the production of gasoline by a catalytic reformer or ethylene cracker. It is also a byproduct of the production of coke from coal. Toluene is used across several industries for various applications. It is predominantly used as an appreciable solvent. Application: As a solvent, toluene can be used in paints, paint thinners, adhesives, inks, resins, cleaning agents, leather tanners and inks. It can also be used to manufacture polymers that produce nylon, plastic soda bottles and for pharmaceuticals, dyes and cosmetic products. Toluene is also used as a coolant in sodium cold traps underneath nuclear reactor loops. Packing: 220 kg Drum, IBC, ISO Tank, Flexi bag. Item Specification Purity (GC): 99.9 % Identity (IR): conforms Evaporation residue: 2.0 mg/l Water: 0.05 % Acidity: 0.0002 meq/g Alkalinity: 0.0006 meq/g Transmission (at 300nm): 70 % Transmission (at 310nm): 80 % Transmission (from 350nm): 98 %
Diethylene glycol is an organic compound. It is a colorless, practically odorless, poisonous, and hygroscopic liquid with a sweetish taste. It is miscible in water, alcohol, ether, acetone, and ethylene glycol. Compared to MEG, it has a higher boiling point, viscosity and specific gravity. Application: Polyester resins, polyurethanes, plasticizers, Antifreeze additive, Unsaturated polyester resins, Softening Agent, Solvents Coupler, Heat transfer agents or fluids, Chemical intermediates etc. Packing: 220 kg Drum, IBC, ISO Tank, Flexi bag. Item Specification Appearance : colorless Purity: 99.8 wt % min MEG: 0.05 wt % max TEG 0.05 wt %: max Water: 0.05 wt % max Colour (pt-Co): 10 max Specific Gravity, 20/20 C: 1.1175-1.1195 5% vol: Min 242 C 95% vol: Max 250 C Acidity (as acetic acid): 50 mg/kg max Ash: 50 mg/kg max
Mono Ethylene Glycol MEG is a clear, colourless, virtually odourless, and slightly viscous liquid. It is miscible with water, alcohols, and many organic compounds, and has the molecular formula C2H6O2, CAS: 107-21-1. It has a specific gravity of 1.115 and a flash point of 110°C. Application: It is an important raw material for industrial applications. MEG is utilized in the manufacture of polyester (PET) resins, films, fibers, antifreezes, coolants, aircraft anti-icer and deicers and solvents. It is also utilized as raw material for paper industry, polyester Resins, adhesives and inks, chemical Intermediates, Heat Transfer, Fluids. Packing: 220 kg Drum, IBC, ISO Tank, Flexi bag Item Specification Appearance Clear Colourless MEG Content Wt % min: 99.9 DEG Content Wt % min: 0.04 Specific Gravity @20/20 Deg C: 1.1151-1.1156 Water Wt. % max: 0.04 Colour (before heating) Pt-Co Units Max.: 5 Acidity (as acetic acid) Wt.ppm Max.: 10 Chlorides (as CL) Wt.ppm Max.: 0.1 Sulphates Nil Iron Wt.ppm Max.: 0.1 Ash Wt.ppm Max.: 10 Aldehydes (as ormaldehyde) Wt.ppm Max.: 10
Linear Alkylbenzene (LAB) is a raw material of an important anionic surfactant, Alkyl Benzene Sulfonate, widely used in daily chemical washing, textile auxiliaries, industrial cleaning, printing and dyeing, electroplating, leather and paper industry etc. LAB can also be used in lubricating oil, capacitor oil, part of the solvent etc. Application: LABs are used to produce linear alkylbenzene sulfonate (LAS) which is a biodegradable surfactant & has great cleaning properties and as such, it is an important component of detergents and cleaning solutions. Packing: Standard export neutral packing in Tanker, Bulk chemical carrier, Flexibag etc. Item Specification Appearance (visual): Clear & Bright Specify Gravity (15.5/15.5 °C): 0.85- 0.88 Bromine Index (Br2.mg/100g): 15 max Saybolt Color: +30 min Refractive Index (20 °C): 1.480- 1.485 Water Content (wt.ppm): 200 max Dialkyltetralin (wt.%): 1 max Paraffin Content (wt.%): 0.4 max Monoalkylbenzene Content (wt.%): 98.6 min C9 & lighter: 1 max C10: 6- 16 C11: 28- 39 C12: 25 - 40 C13: 10 - 30 C14 & heavier: 2 max Average Moleculer Weight: 238 - 250 2-phenyl isomer (wt.%): 15 min
Liquid ammonia / anhydrous ammonia (NH3) is an important chemical raw material with a wide range of applications. Liquid ammonia can be used as a refrigerant. It is mainly used to produce nitric acid, urea and other chemical fertilizers, and can also be used as a raw material for medicine and pesticides. In the defense industry, it is used to make propellants for rockets and missiles. Application: Agriculture Industry, Pharmaceutical Industry, Textile Industry, Refrigerant, Defense Industry etc. Packing: 100Ltr Cylinder, 800Ltr Cylinder, ISO Tank Item Specification Purity: 99.5 % Oil (Max): 0.02 % Moisture (Max): 0.5 % Residue On Evaporation % By Volume: 0.05 % Pyridine: Nil Napthanlene: Nil Phosphic: Passes Test Sulphur Compounds: Passes Test
Glacial acetic acid (CH3COOH) is commonly used as analytical reagents, general-purpose solvents, non-aqueous titration solvents, chromatographic analysis reagents, and organic synthesis. used for the synthesis of vinyl acetate, cellulose acetate, acetate, metal acetate and halo-acetic acid. It is also an important raw material for pharmaceuticals, dyes, pesticides and organic synthesis. Application: Mainly used in the production of vinyl acetate monomer, then acetic anhydride and ester production. Packing: 30kg Drum, 215kg Drum, 1000 Kg IBC, ISO Tank. Item Description Acetic acid: Min. 99.8% Color(APHA),Pt-Co: Max. 10 Acetaldehyde: Max. 0.05% Formic acid: Max. 0.06% Water: Max. 0.15% Iron(Fe): Max. 0.0004% Residue after evaporation: Max. 0.01% Permanganate: Min. 30min
Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, or deep purple to rusty red. The iron is usually found in the form of magnetite (Fe3O4, 72.4% Fe), hematite (Fe2O3, 69.9% Fe), goethite (FeO(OH), 62.9% Fe), limonite (FeO(OH)n(H2O), 55% Fe) or siderite (FeCO3, 48.2% Fe). Ores containing very high quantities of hematite or magnetite (greater than about 60% iron) are known as natural ore or direct shipping ore, meaning they can be fed directly into iron-making blast furnaces. Iron ore is the raw material used to make pig iron, which is one of the main raw materials to make steel 98% of the mined iron ore is used to make steel. Item Specification Fe: 57 Min SiO2: 4 Max Al2O3: 5.5 Max Moist: 12 Max P: 0.08 Max S: 0.04 Max +40mm: 5 Max -6mm: 20 Max LOI: 7 About TI: 70 Min AI: 15 Max RI: 60 Min RDI: 25 Max DI: 10 Max
In its mineral form Bauxite, Aluminium is the most abundant metal in the earth's crust. Bauxite contains one of a variety of hydrated aluminium oxides (gibbsite, boehmite or diaspore), which are often expressed as Al2O3xH2O but are more commonly regarded as impure Al2O3. Bauxite is claylike and earthy, and ranges in colour from white to deep brown or red according to the nature and quantity of its components. The major impurities in Bauxite are iron oxides (goethite & hematite), silicon dioxide, the clay mineral kaolinite as well as small amounts of anatase (TiO2). Consequently, its composition varies considerably with alumina constituting from about 50% to about 70%. Aluminium content can be accurately and precisely determined over a broad analytical range simultaneously along with Si, Fe, Mn, Ti, Zr and up to 20+ other elements. Item Specification Color: Brown, yellow / light red Granularity: 0-1/1-3/3-5/5-8 mm, 200/325 mesh Application: Aluminium/Precision Casting/Refractory Density: 4.3 g/cm3 Hardness: 1-3 Fe2O3 Content: 3.0% Max CaO Content: 0.2 Max Package: 25 kg/bag Payment terms: T/T L/C
Zinc ore is most commonly found as zinc carbonate (ZnCO3), known as calamine or smithsonite. It generally occurs as rounded, crystalline crusts or granular, honeycombed masses that have a vitreous or pearly luster and are typically dirty brown or grey in colour. Zinc is a chemical element with the symbol Zn and atomic number 30. Zinc is a slightly brittle metal at room temperature and has a shiny-greyish appearance when oxidation is removed. It is the first element in group 12 (IIB) of the periodic table. In some respects, zinc is chemically similar to magnesium: both elements exhibit only one normal oxidation state (+2), and the Zn2+ and Mg2+ ions are of similar size. Zinc is the 24th most abundant element in Earth's crust and has five stable isotopes. The most common zinc ore is sphalerite (zinc blende), a zinc sulfide mineral. The largest workable lodes are in Australia, Asia, and the United States. Zinc is refined by froth flotation of the ore, roasting, and final extraction using electricity (electrowinning). Item Specification LE: 60.244% Zn: 32.767% Pb: 4.403% Fe: 2.244% Ti: 0.225% Hf: 0.073% V: 0.03% Zr: 0.014% Moisture: >3
The main copper sulphide minerals are chalcopyrite (CuFeS2) chalcocite (Cu2S), covellite (CuS), bornite (Cu5FeS4), tetrahedrite ((Cu,Fe)12Sb4S13) and enargite (Cu3AsS4). The largest source of copper is from porphyry ore deposits in which one or a combination of the minerals occurs. A typical copper sulphide ore contains various levels of iron sulphide types that generally include pyrite (FeS2) and pyrrhotite (Fe1-xS). Often gold and silver are present which may either be associated with the sulphides or are free. The gangue particles can consist of a range of silicate minerals from quartz to talc and clays. Item Specification CR2O3: 42% Basis: 40% Min CR/FE Ratio: 1.35:1 MGO: 14% Max AL2O3: 16% Max SIO2: 10% Max P: 0.01% Max S: 0.01% Max Size 0-2 MM: (95% Min) Moisture at 105C or 110C: 8% Max
Dead burned magnesite 97% is a chemical substance, which means that when magnesite is calcined at 1800C, carbon dioxide completely escapes, and magnesium oxide forms a dense block of periclase. This dead burned magnesite has a high degree of fire resistance. Its main component is magnesia, which is made of natural special magnesite magnesia through flotation purification, light burning, fine grinding, high pressure ball pressing, and ultra high temperature oil shaft kiln calcination. Application: Dead burned magnesite 97% are made from sorted super grade natural magnesite through sections including float concentration, calcination, fine grinding, high pressure briquetting and ultra high temperature sintering in heavy oil shaft kilns. They are good quality materials for making magnesia bricks and monolithic refractories. Packing: Jumbo bag(or according to the customer requirement)