- Design Pressure : 2.3MPa - Volume capacity : 100~1000kg/hr - Material : SUS304 - Standard/Certificate : Registered a patent for practical new design of devices preventing fluids-flow out of electro thermal hot water carburetor, Registered a patent of practical new designs for liquefied gas using waste heat coolant.
Weight Measurement Function: By Hours, minutes and seconds unit, Display the status of the usage of liquid gas and it can be used being installed on storage tank or tank lorry and can be carried as a portable measuring instrument. PC Monitoring Function: As the remained liquid goes below 10% of its capacity, it automatically alarms to supplement liquid gas. Thus, the appropriate time for supplement of liquid gas can be decided on time. Alarm Function: the liquid remaining of the storage tank is less than 10%, The alarm sound provides information that you can setting the a liquid supply time. Diversity Of Power Supply: Use the usual 220volt electric, in case of power outage, the built-in battery will supply the charged electricity, in addition built-in battery is operated and available for tank lorry using the car battery. Option (Printer : additional purchase): Receipt Output Function; Portable thermal transfer printer can use the output value measuring of storage tank and tank lorry without visiting a long measuring place directly by the output as a receipt.
* substitute of 'LOCTITE 401' * EU RoHS compliant product * Non-solvent : Does not contain organic solvents and does not cause hallucinatory effects. Suitable for use in various work environments. * Cures at room temperature (20C to 30C) and does not require special curing equipment. * Fast curing that bonds in seconds. Reduces job completion time and facilitates automatic production lines. * Transparent and low odor. Works well with any use and material to give a clean finish. * Viscosity (cps) : 90~110 / Tensil-Shear Strength : Above 180 / Initial Cure Speed : 3~5 / Working Temperature : -54~82C
Material : Graphite, PTFE, etc. Application : - Valve - Pump (Power plant, boiler water supply and condensate pump, etc.) - SOOT BLOWER - All other places requiring efficient sealing in the factory Feature : This braid packing adds the molybdenum-based anti-corrosion agent to the high purity flexible graphite tape at below 50ppm Chloride which is equivalent to the nuclear power level with high degree of thermal conductivity and low coefficient of the friction, and it is the multi-purpose packing designed for use of both valves and pumps as it is more endurable with the continuous filament carbon fiber inside the braid as well as the graphite inside in order to be endurable at high RPM and pressure. Therefore it is not necessary to use End Ring for prevention of extrusion. Moreover, the most optimal flexibility is guaranteed with the special braiding technology of DONGSUH ALS900G, so that the adjustment or harmonization with the shaft or stem is outstanding as the entire distribution is uniformed even if it is mounted in any shaft or stem size. No wearing or scratching of the shaft or stem can be found due to the self-lubricating function of the high purity graphite while decreasing the packing life span significantly. DONGSUH ALS900G is suitable for overall conditions in the factory such as valve and pumps, etc. Using with ALS350 Graphite Molding Packing as End Ring will get better sealing effect.
We manufacture and produce main faucets and relevant products used in bathrooms and kitchens. Wonjin Metal Incheon Branch offers high quality products to domestic faucet business such as DADA, Daelim B&CO, and Kelim, based on long experience. Wonjin Metal Incheon Branch is now taking more than 65% of market share in Korean industry of faucets and related products. 1: Feed pipe 2: Trap 3: Angle valve 4: Pop-up
Al-Brass: Al-Brass is an alloy containing aluminium. It is frequently used for heat exchangers due to its high corrosion and seawater resistance property. Application: Condenser for thermal/nuclear power generation, condenser for vessels, feedwater heater, etc. Al-Brass : C4430/KSD5301 Al-Brass : C6871/KSD5301 Al-Brass : C6872/KSD5301 Al-Brass : C6872/KSD5301
Manufacture alloy bars in various shapes and sizes by extruding and drawing of billet. Copper Alloy Bar - Forged Bar : C3771/KSD5101 Copper Alloy Bar - Free Cutting Bar : C3604/KSD5101 Copper Alloy Bar - Naval Bar : C4622/KSD5101 Mainly used to produce vessel parts or shafts due to its high degree of corrosion and seawater resistance.
An electric generator is classified roughly into physical instrument and chemical instrument. The physical generator includes water-power, thermal-power,atomic-power, wind-power, and other generators. The chemical generator is divided into primary cell (battery)and secondary battery. The primary cell is generally disposable, while the secondary battery can be used again after charging.
An electric generator is classified roughly into physical instrument and chemical instrument. The physical generator includes water-power, thermal-power,atomic-power, wind-power, and other generators. The chemical generator is divided into primary cell (battery)and secondary battery. The primary cell is generally disposable, while the secondary battery can be used again after charging.
Balem 441 is a float hydraulic liquid level control valve for use in reservoirs. It is a solenoid operated hydraulic control valve. In case if power failure, it can be overridden mechanically by installing a pilot valve. It is suitable for and safe at high pressure flow as it' s opening and closing is both by solenoid and mechanical pilot valve. It' s corrosion resistance and thermal resistance is excellent, and it will not contaminate the line fluid.
Since its establishment in 1993, Dongsuh Industry Co., Ltd. has specialized in manufacturing SEALING products for power generation facilities in Korea. In particular, as we manufacture SEALING products, which are mostly used in critical power generation equipment systems, we value quality stability and develop excellent technical skills. The reliability of quality has been verified by acquiring 'Q', the highest level of safety of qualified suppliers, including ISO 9001 and 14001, and the five leading power companies under the Korea Electric Power Corp. have various quality certificates. We are also conducting R&D to continuously improve quality, improve working environment, and develop new products. Based on these efforts, we have won awards for excellent suppliers to major power generation companies in Korea and expanded our production lines by steadily increasing sales. We are now trying to move beyond the domestic market to the global market. SPIRAL WOUND GASKETOutstanding capability for high temperature and high pressure Automatic flexibility and recovery from the change of temperature, pressure, vibration and working conditionsEfficient production for any type of dimensions such as round or oval type, etc.Outstanding sealing capability as it is produced according to the pressure of unbalanced flange. Hoop and Filler materials can be selected according to special operating conditions. GRAPHITE MOLD PACKING â?¢ Graphite Tape Packing is the packing that compressed and molded in a certain dimension for easy installation. â?¢ The graphite's self-lubrication capability and low coefficient of friction allow to use in a wide range without giving damage on the reciprocating and rotary shaft. â?¢ If you want to disassemble only gland without disassembling pump and valve, you can just cut it and deliver. â?¢ You can get better sealing effects if you use with ALS910C, ALS900G and ALS955W depending on the use purpose. RING JOINT GASKET Ring joint gasket is a type of pressure energized gasket used on pipe flanges, pressure vessels, Valve bonnets handling, high pressure steam, gas, hot oil, solvent vapor at high temperature. DONGSUHs experienced technology offers many different types so that customers may select the most suitable one in accordance with operating conditions. MECHANICAL PACKING (VARIOUS MODELS DEPENDING ON CONDITON) PTFE V-PACKING SPRING ENERGIZED SEAL
[O-RING, RUBBER SHEET GASKET] - Materials : Choose appropriate material according to NBR, HNBR, EPDM, Silicone, FPM (Viton), Kalrez, CR rubber, temp. and other working materials. - Temperature : -60°C~+300°C, It depends on the material type. (Heat-resistant) - Fluid Sealed : Choose suitable material depending on fluid or air (oil-resistance and chemical-resistance) - Pressure : For static seal, within 100bar (without Back-up Ring), above 100bar (use Back-up Ring) For dynamic seal, within 50bar (without Back-up Ring), above 50bar (use Back-up Ring) - Speed : Reciprocating - Max. 0.5 m/s. Rotary - Max. 0.5 m/s. [SPRING ENERGIZED SEAL] APPLICATION ACTUATORS, Gas turbine engine, ICE MAKERS, Plastic injection moulding machine, Spaceship, Infrared rays system, VALVES PUMPS, Medical experimental equipments, HPLC, Petro-chemical plant, FILLING MACHINE, Hydraulic and pneumatic system for air plane, METERING, Food processing line, Tooling machine, Fuel control line for air plane, Vacuum units, PRESSURE SWITCH, Infrared rays system, Extremely low temperature units and gasket
1: Optimal Sealing by O-Ring Highly durable Teflon O-Ring was used and special coating was done at the contacting point of O-Ring to ensure perfect Sealing and secured operation at fire detecting. 2: Shock proof structure with steel ball support method With 8 steel ball support structure for shock esistance, it Is reliably safe from external impact and free from damage And leakage 3: Low Assembly Load By minimizing the assembly load with o-Ring Sealing Method, safety is secured with low pressure inside the Head. 4: Excellent Design As the head is installed in the building, aesthetic design By minimizing heat detecting with small head was made.
Hello. I am Y.K. SON from Jireh Korea. We are supplier to Shipyard with Engineering Service in korea. But there was a problem, when Wartsilar Engine landed from Vessel. (This engine, It's fell down to right side. So, it's was broken the air cooler box.) And Wartsilar korea said, it's very expensive for repaire, also we can not use this on time. So, we trying to sell out for spare parts. I found your company information on website. If you interesting it with low price, Please contact me. Model No. : W6L34DF (Wartsila Finland)./Alternator : Hyundai 2,770KW 6.6KV 10P
Describe the idea and what it actually does: The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact. 2. Explain in detail how the idea would be operated used The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer, 3. What features do you believe your idea has that makes it unique and appealing? The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics. 1) Number of Joints for Each Shaft - In the case where the number of joints is large, a sensation of impact is increased somewhat. - The case where the number of joints is small is appropriate for golfers with weak swings. - In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high. 2) Space between Joints - Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long. -The kick point goes down toward the tip when the space between the joints in the butt part is long. - A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased. 3) Structure of Fabric - Fabric having high elasticity and strength is used, thereby resulting in distinctive performance 4.What need does the idea fulfill? This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom. 5. Descripbe possible variations of your idea: The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
Golf shaft The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact. 2. Explain in detail how the idea would be operated used The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer, 3. What features do you believe your idea has that makes it unique and appealing? The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics. 1) Number of Joints for Each Shaft - In the case where the number of joints is large, a sensation of impact is increased somewhat. - The case where the number of joints is small is appropriate for golfers with weak swings. - In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high. 2) Space between Joints - Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long. -The kick point goes down toward the tip when the space between the joints in the butt part is long. - A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased. 3) Structure of Fabric - Fabric having high elasticity and strength is used, thereby resulting in distinctive performance 4.What need does the idea fulfill? This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom. 5. Descripbe possible variations of your idea: The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
Used car and spare parts.
Used Korean Furniture And Hotel Items.
Used Generators, Used Auto Parts (volvo, Scania Parts) Auto Rubber Parts For Korean & Japanese Parts.
Used auto parts, engine and body parts , rubber parts for korean cars, used generator.Trading company, agent