Tin : The Pitch Being Very Malleable Can Easily Be Laminated Into Thin Sheets (staniol) Obtaining : - From Casierite, By Reduction With Charcoal. Use : - Electro technical / Electronics Industry (soldering Alloys); - Coating Other Metals To Protect Them Against Corrosion. Property : - Being Very Malleable, Can Be Easily Laminated Into Thin Sheets (staniol). Material Specification : According To Sr En 610/2000. Brand : Sn 99.9. Presentation Form : Max. 30 Kg. Provenience : Import
Recommended for cleaning stainless steel surfaces in the bathroom, kitchen, construction, industry. Cleans all stainless steel surfaces without rinsing. Pronounced descaling effect. Clean the rust. It leaves no traces. It can also be used for cleaning surfaces made of sandstone, ceramic, faience, enamel, glass. It offers resistant gloss. Professional solution for efficient cleaning of stainless steel surfaces of elevators. and other stainless steel surfaces PVC CAN. 5L
Professional detergent for daily pickling and cleaning of hard, water-resistant surfaces. Degreasing detergent for floors of any type (linoleum, sandstone, mosaic, epoxy resins, marble, granite), designed to remove coarse oil stains, grease, surface rust deposits, polymer wax residues. Provides a deep cleaning and degreasing, without affecting the surface and without leaving the surface slippery. Ideal for degreasing the surface to be treated with successive layers of polymers. It can be used in automatic washing machines but also manually. Reduced foaming. PVC CAN. 5L
Zinc : Zinc: White-white Metal, Brittle, Cold-deformable But Possible To Be Laminated Between 100 - 150oc. Obtaining : - From Complex Concentrates (pb - Zn) By Oxidative Frying, Followed By A Reduction In Furnace (isp Process). - The Crude Zinc Obtained In The Blast Furnace Is Subsequently Purified Either By Fractional Distillation (new Jersey Process) Or By Electrolytic Refining. - By Hydrometallurgical Way, When The Fried Concentrate Is Subjected To Solubilization With Znso4 Formation. After Purification, The Solution Is Subjected To Electrolysis, A Process Resulting In A Zinc With A Purity Of Min. 99.99% Zn. Use : -coating Of Steel Sheets And Foils For Corrosion Protection; -obtaining Of Copper-based Alloys, Resistant To Corrosion (brass, Alpaca) - Obtaining Of Castings Under Pressure From Zinc-based Alloys (zamac) Etc. -obtaining Zinc Oxide With Uses In The Pigment Factory, Rubber Industry, Medicine, Ceramics, Etc. Properties: - White-blue, Brittle, Cold-deformable But Possible Laminate Between 100 - 150oc. Material Specification: - Stas 646-88, Astm B949, Sr En 1179: 2001 Make : - Shg - Min. 99,995% Zn - Hg - Min. 99.95% Zn - Gob - Min. 98,5% Zn. Presentation Form : Ingots Provenience : Import From Poland, Bulgaria Etc
Metallic Silicon : Metallic Silicon: Friable Dark Gray Material, Hardener Of Alloys Based On Aluminum Or Copper. Obtaining : - By Reducing The Quartz In Electric Furnaces. Use : - As The Main Alloying Element For The Production Of Aluminum-silicon Alloys (silumin); - Alloying Element To Obtain Silicon Bronzes (copper-nickel-silicon Alloys). Properties : - Friable Material Of Dark Gray Color, Hardener Of Alloys Based On Aluminum Or Copper. Material Specification : According To Stas 9675/1980. Presentation : Granules 10 - 100 Mm Packaging : Big Bags 1.000 Kg Provenience : Import
Ferro Titanium : Titanium Iron Alloy, Having Titanium Content Between 28 And 75% Obtaining : - By The Aluminotermic Reaction, The Method Being Performed Either In The Furnace, Or In Reduction Curves. Use : - Steel Deoxidation; - Production Of Special And Anti-corrosive Alloy Steels. Feti 70 Material Specification : According To Sr Iso 5454/1995. Chemical Composition : Ti 65 ÷ 75%; Si = 0.10% Max; Mn = 0.20% Max; C = 0.20% Max; P = 0.03% Max; S = 0.03% Max; V = 0.50% Max. Granulation : 5 ÷ 50mm; 10 ÷ 50mm; (90% Min) Packaging : Big Bags 1.000 Kg.
Ferroniobium : Niobium Iron Alloy, Having A Nickel Content Of 60 To 75% Obtaining : - Through Metalothermic Reduction Reactions (silicothermia Or Aluminotermia). Use : - Production Of Special Alloy And Anti-corrosive Alloys. Fenb 65 Material Specification : According To Sr Iso 5453/1996 Chemical Composition : Nb 60 ÷ 70%; Ta = 0.5% Max; Al = 1.0% Max; Si = 2.5% Max; Ti = 0.4% Max; C = 0.15% Max; P = 0.10% Max; S = 0.05% Max; Sn = 0.10% Max; Co = 0.05% Max. Granulation : 5 ÷ 50mm; 10 ÷ 50mm; (90% Min).
3.000.000 of COVID-19 rapid tests available on stock in Romania; 1 to 2 days for delivery everywhere in Europe. We are the European representative of the Korean manufacturer of covid-19 rapid detection kit 1. GENEDIA W COVID-19 Ag, nasopharyngeal differential detection of COVID-19; 2. GENEDIA W ONE COVID-19 IgM/IgG differential detection of COVID-19 IgM and IgG; 3. GENEDIA W COVID-19 Ag (SALIVA) All the tests have CE mark, exceptional sensitivity and quality, can be used both by medical staff and for self-testing. All documentation is available upon request,
Nickel : Nickel Has High Corrosion Resistance To Atmospheric And Chemical Agents. Obtaining : - Reduction Of Nickel Oxide Oxides Or Nickel-nickel Cuprous Processing, Followed By Purification By Electrolysis Or Mond-carbonil. Use : - Obtaining Of Stainless Steels And Special Alloys; - Obtaining Wear-resistant Cast Iron; - Obtaining Copper-nickel-zinc (alpaca) Alloys; - Corrosion Protection Of Ornamental Articles; - Obtaining Raney Nickel Catalysts For The Chemical Industry. Property : - High Resistance To Corrosion Of Atmospheric And Chemical Agents. Material Specification : According To Stas 10502/1976; Iso 6283/1995. Brand : Ni 99.95. Presentation : 800 X 800 X 10 Mm Plates. 100 X 100 X 10 Mm Packaging : Packs Of Cathodes Or Metal Barrels.
Ferro Chromium : Iron Chromium Alloy With Chromium Content Ranging From 45 To 95%. Obtaining : - By Electrothermia, Reducing The Chromium Oxides By A Complex Scheme In Succession. Use : - Production Of Special And Anti-corrosive Alloy Steels; - In The Chemical Industry, Machine Building, Etc; - Manufacture Of Cutting Tools, Resistant To High Cutting Speeds. Ferro Carbon With High Fecr60c70 Chemical Composition : Cr 60% Min; C = 6.0 ÷ 8.0%; Si = 1.5% Max; P = 0.030% Max; S = 0.05% Max. Granulation : 5 ÷ 50mm; 10 ÷ 50mm; 10 ÷ 80mm; (90% Min). Packaging : Big Bags 1.000 Kg Ferro Carbon With Very Low Fecr 60 C 10 Chemical Composition : Cr 60% Min; C = 0.10% Max; Si = 1.5% Max; P = 0.050% Max; S = 0.030% Max. Granulation : 5 ÷ 50mm; 10 ÷ 50mm; 10 ÷ 80mm; (90% Min). Packaging : Big Bags 1.000 Kg
Ferro Silicon : Silicon Iron Alloy, Having A Silicon Content Of Between 40 And 90%; Typically Contains A Large Amount Of Iron Silicas And 1-2% Calcium. Ferrosiliconand Aluminum. Obtaining : - By Reducing The Silicon Dioxide (sio2, Natural Mineral = Quartz) At High Temperatures In Electric Furnaces. Use : - In The Production Of Alloyed Steels, Silicon Content Ensuring Good Deoxidation, As Well As Preventing The Decarburization Of Molten Steel; - Added To Gray Cast Iron, Increases Fluidity In Molten State. Chemical Composition : Si 72 ÷ 80%; Al = 1.5-2.0% Max; P = 0.05% Max; S = 0.04% Max; C = 0.20% Max. Granulation : 10 ÷ 50mm; 10 ÷ 80mm; 10 ÷ 100mm; (90% Min). Packaging : Big Bags 1.000 Kg.
Particulate filter mask FFP2 MODEL LT2020 - AP2V Equipment for protection against nuclear, biological, chemical and radiological agents With the help of innovative filtration technology, you can breathe through the protective mask with less effort. The ingenious design, suitable for facial movements during speech, offers the user increased comfort. The nose mounting system offers increased compatibility with goggles and reduces their misting Available with Cool Flow breather valve for efficient removal of heat and condensation, offering a much more comfortable wear. Available in hygienic packaging to protect against contamination of the respirator before use, which also allows practical storage at work. Provides protection in dust and fog conditions, which are found in a variety of industrial applications and other work situations that require FFP2 protection. It blocks 95% of existing viruses Protection Level : FFP2 Layers : 5 Style Grip : On the ear Warranty : 2 Years Weight per piece : 6.5 grams Size Standard : 12 x 15.5 cm (Width x Height) Color : White Reference number: LT2020 - AP2V Cod GTIN: CPV: 35113200-1 Holds Certificate Number: CE 0370 Respiratory protective devices to EN 149:2001+A1:2009
We're producing & selling charcoal for barbecue/grill. Our charcoal is genuine, authentic. The high-grade charcoal has many advantages to be used anytime when you're cooking meat, mushrooms, etc. The temperature of the flame is higher, and the burning time is longer than ordinary charcoals. The charcoal sizes vary, and the fuel is extremely hard. Our products are cut into pieces for use in both domestic and professional barbecue grills.
Trucks & Trailers.
Sunflower oil with antifoaming agent for professional use - 5L bottles.
Thanks to the elements it contains, it satisfies the basic nutrient requirements of plants. It helps prevent the formation of a creamy layer in the soil. Helps to increase the amount of organic matter in the soil. Expert data after using 12.15.5+(15SO3)+Zn shows an increase in tonnage, quality and polar-brix index. Especially recommended for use in sugar beet, sunflower, cereals and potato production.
Due to the elements it contains, 15.5.5+(20SO3)+Zn helps meet the basic nutrient requirements of plants. Prevents the formation of a creamy layer in the soil. Increases the amount of organic matter in the soil. As it has natural chelating properties, helps improve plant health by dissolving previously used chemical fertilizers. Helps prevent the formation of salts in the soil as it breaks down the lime dissolved in the water and converts it into calcium. The experience of using this fertiliser ensures high tonnage and quality products. It is particularly recommended for products such as beets, sunflowers, cereals and potatoes.
Due to its high element content, 15.20.0+(10SO3)+Zn helps meet basic plant nutrient requirements. It prevents the formation of a creamy layer in the soil and helps to increase the amount of organic matter in the soil. The experience of using the fertilizer guarantees a high tonnage and quality production. Contributes to the increase of polar and brix values of products. Especially recommended for use on sugar beet, cereals, potatoes and in fruit orchards.
Thanks to the high content of elements, it helps to meet the basic nutrient element needs. It helps to prevent the formation of cream layer in the soil. Contributes to increase the amount of organic matter in the soil. It helps to obtain high tonnage and quality products. It contributes to increase sugar beet polar value. It is especially recommended for use in beet and fruit gardens.
Thanks to the 70% organic matter contained in it, it is recommended to be used in the reclamation of barren and inadequate soils. It contains 20% Humic-Fulvic acid. Removes the salinity of the soil. Prevents slider retention. Since it is fermented, it does not contain harmful ingredients such as weed seeds, nematodes, etc.