Dental and surgical instruments.
Surgical and dental instrument, iris scissors, dressing scissors, nail cutters, dressing forceps, tissue forceps.
4.9 MW NATURAL GAS COGEN POWER PLANT with 3x JENBACHER JW 616GS 1.500 rpm. 50 Hz. Engines Details Make: JENBACHER (Austria) Model: JW 616GS. Fuel: Natural Gas. Q’ty: 3. Nominal Output: 1.605 kW. (each) Total Output: 4.9 MW. Speed: 1.500 rpm. Total running hours: Unit 1: 60.000 hrs. aprox. Unit 2: 60.000 hrs. aprox. Unit 3: 61.000 hrs. aprox. The last main overhaul was done in year 2005 at 40.000 hours. The next main overhaul is scheduled at 70.000 hrs. At the intervals of 2.000-4.000 hours the maintenance was done by own technician staff. At the intervals of 10.000-20.000 hours the maintenance was done by the Jenbacher official service. The engines were stopped in summer 2011. They never had any serious breakdowns. The reports state that the engines reached the full load capacity until the last running day easily. Generator Details Make: NEWAGE/STAMFORD (Germany-England) Type: CG.I734H2. Base Rate (BR): 1840 KVA / 1472 kW. Frequency: 50 Hz. 690 V. 3 Phases. Cos fi: 0.8 Rating: Continuous. Excit Volts: 67 V. Excit Amps: 3.8 A. Environmental temperature: 40 ºC. Enclosure: IP22. Insulation class: Class H. Management System The facility has its corresponding low-voltage cabinets for command and control, and each engine and the installation have their own cell lines. The power plant is governed by an automatic system of ABB SCADA, which allows control of each engine, data capture, storage of historical production, alarms and so on. Each of the machines in the facility has its own command and control cabinet and they are all linked to the SCADA system. Steam Boiler Make: Moiman. Year: 1997. Pressure: 11 bar. Volume: 11.08 m3. Power: 3,489,763 Kcal/h. Capacity: 4,500 Kg/h of steam. Cold water feeding and condensation network. Independent reviews done by a Control Agency under the provisions of Pressure Vessel Regulations. Chiller Absorption Machine Make : TRANE. Year: 1997. Main overhaul: pumps, tube bundles and lithium bromide in 2009 by TRANE. Inlet hot water temperature: 92ºC. Outlet temperature: 72ºC. Flow 35, 3 l/s. C.O.P: 077. Cooling power: 2.267,13 kW. Total working hours: 38.618 hours. Regular reviews done by both own technical staff and TRANE service. Each generator is connected to a 2,000 KVA transformer, yield 0.98, oil bath, which raises the voltage to 20.000 Volts. There is also a fourth smaller unit for control and measurement purposes. Tools and Spares Some spares are left in the plant like a brand new ABB turbocharger plus a set of dismantling tools. Scope of Supply 3x JENBACHER JW616GS 1.605 kW. (each) Natural Gas Generator Sets. 3x STAMFORD 1.4372 kW. (each) Electric Generators. 1x CONTROL PANEL with ABB SCADA SYSTEM. 1x MOIMAN Steam Boiler with a steam generating capacity of 4.075 kWt. 1x TRANE Chiller/Absorption Machine. 3x Transformers 2.000 KVA (each) + 1 small unit. The Gas Train. Heat exchargers, valves The exhaust silencers. The Chimney. Various fans, pumps, 3-way valves. Various documents, spares and maintenance books. Available dismantling tools and some spares at the facility. FOB price has to be calculated. For more information please contact Metalúrgica Riba, s.l. | Power Plants and Spare Parts
Product Description : After removing the red part from the wet Negin saffron, or the red and orange part in Pooshal saffron, the style and white part of saffron remains and these parts will be dried and used in special cases and uses. It should be noted that the white part of saffron has almost all the properties of saffron, such as aroma, flavour, etc., except the colour. Therefore, they use white part in a kind of industry, which only needs the aroma or taste of saffron and does not require red colour. For example, in the culinary industry, when it is needed to have the aroma and taste of saffron, without changing the colour, like cooking some types of fish, the white of saffron will be used. Product origin : Iran Minimum Order Size and Packgaing details : 1Kg
Product Description : When the wet three-branched red colour stigma with its orange end is been removed and dried. Pooshal Saffron which can easily been recognized by its orange end, has different grades according to its orange end size. The smaller the length and size of the orange part, the saffron will be more favourable due to its better colour number. Product origin : Iran Minimum Order Size and Packgaing details : 1Kg Row Analysis Result Unit Standard Range 1 Crocin >215 Absorption Min 210 2 Moisture 3.33 - f Max 8 3 Foreign 0.05 Percent Max 0.1 4. Extraction And Negative - Negative Detection of Synthetic Dyes 5. Coleestridium 20 /g Max 10 6. Entrocococci Negative /g Negative
Product Description : When the full wet saffron filament is cut from the junction of the three-branched red stigma, separated from the white part, dried, this type of saffron which is completely prominent and scaly form is called Negin and it is almost the best, the most expensive and most valuable type of saffron. In the Persian literature, Negin is said to a very precious stone, high-quality, brilliant and highlighted which is placed on a gold ring. Negin has been named for this type of saffron because of its value and beauty and brilliance. Product origin : Iran Minimum Order Size and Packgaing details : 1Kg Row Analysis Result Unit Standard Range 1 Crocin >235 Absorption Min 220 2 Moisture 3.33 - Max 8 3 Foreign 0.05 Percent Max 0.1 4. Extraction And Negative - Negative Detection of Synthetic Dyes 5. Coleestridium 20 /g Max 102 6. Entrocococci Negative /g Negative
Product Description : When the red part of the saffron stigma is broken down and removed from the saffron bunch, the red dried saffron filaments has lost its scaly and three-branched connection form due to the breakage of the stigma, and it’s seen in form of dried, relatively flat and broken filaments. Product origin : Iran Minimum Order Size and Packgaing details : 1Kg Row Analysis Result Unit Standard Range 1 Crocin >225 Absorption Min 220 2 Moisture 3.33 - Max 8 3 Foreign 0.05 Percent Max 0.1 4. Extraction And Negative - Negative Detection of Synthetic Dyes 5. Coleestridium 20 /g Max 10 6. Entrocococci Negative /g Negative
Quantity : 5000MT ( spot offer) 5,000 MT X 12 MONTH CONTRACT We ship in 20 ft and 40 ft high cube containers to all international ports. Delivery : For exact C&F prices, please give us detailed information. Origin : Spain Minimum Quantity: 200MT How many tons do you need as trial order? Packaging :According to specification Yard visit :Allowed upon booking for materials Delivery Time: 7-21 days Port of Loading:Barcelona sea port Payment terms: Bank wire Transfer (T/T) with 40% on receiving proforma, 40% on receipt of original papers (commercial invoice, packing list, BL, etc) 20% balance on delivery and inspection of goods to your port. Are you satisfied with our price and payment terms? We await your prompt response together with your purchase order.
Commodity : computer motherboard scrap Quantity : 1000mt ( spot offer) 5, 000 mt x 12 month contract We ship in 20 ft and 40 ft high cube containers to all international ports. Delivery : for exact c&f prices, please give us detailed information. Price : 250 euro/mt Origin : spain Minimum quantity:25mt How many tons do you need as trial order? Packaging :according to specification Yard visit :allowed upon booking for materials Delivery time: 7-21 days Port of loading:barcelona sea port Payment terms: bank wire transfer (t/t) with 40% on receiving proforma, 40% on receipt of original papers (commercial invoice, packing list, bl, etc) 20% balance on delivery and inspection of goods to your port Are you satisfied with our price and payment terms? We await your prompt response together with your purchase order.
1 PC Cotton Bud , 1 Pc Sample Stick , 1 X Container
Chicken legs and parts, thermal coal, aircraft gasoline, aluminum and zinc copper ingots, bauxite, iron ore, copper ore, coltan, cardamom, sugar icumsa 45, cocoa, fish snap, sunflower oil, canned sardines, milk powder, rice, corn, raw cashew.Export
Rails Quantity X Year (R/50 y R/65) PRICE X MT Rails Quantity x Year (R/50y R/65) Quantity x Year Pricex MT Minor Amounts USD 325 1,000,000 USD 311 2,000,000 USD 284 3,000,000 USD 271 5,000,000 USD 244 10,000,000 USD 235 15,000,000 USD 225 20,000,000 USD 220 25,000,000 USD 215 30,000,000 USD 210 40,000,000 USD 200 Commissions x MT USD 3,00 PRICES ASWP Procedures The buyer issues a letter of Intent (LOI) or an irrevocable corporate purchase order (ICPO). Seller issue a complete Corporate Offer(FCO). Buyer signs and stamps FCO page and returns to the seller. The seller issues a draft of the sale agreement (SPA) that will incorporate the terms and full conditions. Buyers signs and stamp Each SPA page and return it to the seller. The seller completes the SPA, signs and stamps it and issues a PROFORMA INVOICE. Buyer's Bank issue DLC verbiage, which the seller's Bank reviews and approves. The seller will send the "Product Test" within 5 working days after the issuance of the draft MT705. The test includes: a) Recent SGS report. b)the asset certificate. c) manufacturing brochure. Within 3 international banking days, the buyer's bank issues irrevocable, transferable SBLC/MT760 and DLC/MT700 confirmed to the seller bank (of the top 50 banks) The buyer will be invited to the port of loading for inspection during loading at the buyer's expense. Shipments will begin within 40 to 45 days of SBLC/MT760- DLC/MT700 approval by the seller's bank. All original documents will be sent to the buying bank via the selling bank via DHL. The buyer's bank makes payment to the seller's bank immediately after loading the material and an SGS report from an independent SGS appraiser is provided. In The Products, The Prices And Commissions Can Be Improved Depending On The Method Of Payment And Quantities
Copper Concentrates Sale Price X TM - LME-12% CIF PRICE ASWP Commisions x MT - 3% Procedures The buyer issues a letter of Intent (LOI) or an irrevocable corporate purchase order (ICPO). Seller issue a complete Corporate Offer(FCO). Buyer signs and stamps FCO page and returns to the seller. The seller issues a draft of the sale agreement (SPA) that will incorporate the terms and full conditions. Buyers signs and stamp Each SPA page and return it to the seller. The seller completes the SPA, signs and stamps it and issues a PROFORMA INVOICE. Buyer's Bank issue DLC verbiage, which the seller's Bank reviews and approves. The seller will send the "Product Test" within 5 working days after the issuance of the draft MT705. The test includes: a) Recent SGS report. b)the asset certificate. c) manufacturing brochure. Within 3 international banking days, the buyer's bank issues irrevocable, transferable SBLC/MT760 and DLC/MT700 confirmed to the seller bank (of the top 50 banks) The buyer will be invited to the port of loading for inspection during loading at the buyer's expense. Shipments will begin within 35 to 45 days of SBLC/MT760- DLC/MT700 approval by the seller's bank. All original documents will be sent to the buying bank via the selling bank via DHL. The buyer's bank makes payment to the seller's bank immediately after loading the material and an SGS report from an independent SGS appraiser is provided. In The Products, The Prices And Commissions Can Be Improved Depending On The Method Of Payment And Quantities
Copper Cathodes Sale Price X TM - $5950MT CIF ASWP Commisions x MT - $10MT minimum Procedures The buyer issues a letter of Intent (LOI) or an irrevocable corporate purchase order (ICPO). Seller issue a complete Corporate Offer(FCO). Buyer signs and stamps FCO page and returns to the seller. The seller issues a draft of the sale agreement (SPA) that will incorporate the terms and full conditions. Buyers signs and stamp Each SPA page and return it to the seller. The seller completes the SPA, signs and stamps it and issues a PROFORMA INVOICE. Buyer's Bank issue DLC verbiage, which the seller's Bank reviews and approves. The seller will send the "Product Test" within 5 working days after the issuance of the draft MT705. The test includes: a) Recent SGS report. b)the asset certificate. c) manufacturing brochure. Within 3 international banking days, the buyer's bank issues irrevocable, transferable SBLC/MT760 and DLC/MT700 confirmed to the seller bank (of the top 50 banks) The buyer will be invited to the port of loading for inspection during loading at the buyer's expense. Shipments will begin within 35 to 45 days of SBLC/MT760- DLC/MT700 approval by the seller's bank. All original documents will be sent to the buying bank via the selling bank via DHL. The buyer's bank makes payment to the seller's bank immediately after loading the material and an SGS report from an independent SGS appraiser is provided. In The Products, The Prices And Commissions Can Be Improved Depending On The Method Of Payment And Quantities
Copper Millberry Scrap 99.99% Sale Price X TM - $6,500 USD CIF ASWP Commisions x MT - 3% Procedures The buyer issues a letter of Intent (LOI) or an irrevocable corporate purchase order (ICPO). Seller issue a complete Corporate Offer(FCO). Buyer signs and stamps FCO page and returns to the seller. The seller issues a draft of the sale agreement (SPA) that will incorporate the terms and full conditions. Buyers signs and stamp Each SPA page and return it to the seller. The seller completes the SPA, signs and stamps it and issues a PROFORMA INVOICE. Buyer's Bank issue DLC verbiage, which the seller's Bank reviews and approves. The seller will send the "Product Test" within 5 working days after the issuance of the draft MT705. The test includes: a) Recent SGS report. b)the asset certificate. c) manufacturing brochure. Within 3 international banking days, the buyer's bank issues irrevocable, transferable SBLC/MT760 and DLC/MT700 confirmed to the seller bank (of the top 50 banks) The buyer will be invited to the port of loading for inspection during loading at the buyer's expense. Shipments will begin within 35 to 45 days of SBLC/MT760- DLC/MT700 approval by the seller's bank. All original documents will be sent to the buying bank via the selling bank via DHL. The buyer's bank makes payment to the seller's bank immediately after loading the material and an SGS report from an independent SGS appraiser is provided. In The Products, The Prices And Commissions Can Be Improved Depending On The Method Of Payment And Quantities
Commission x TM Purchase Sale Price x MT Minors of 100,000 MT Quality USD 3,00 USD 2.350,00 USD 2550 Aluminum 99.27% USD 3,00 USD 1.950,00 USD 2,000 Aluminum 99.24% CIF PRICES ASWP Procedures The buyer issues a letter of Intent (LOI) or an irrevocable corporate purchase order (ICPO). Seller issue a complete Corporate Offer(FCO). Buyer signs and stamps FCO page and returns to the seller. The seller issues a draft of the sale agreement (SPA) that will incorporate the terms and full conditions. Buyers signs and stamp Each SPA page and return it to the seller. The seller completes the SPA, signs and stamps it and issues a PROFORMA INVOICE. Buyer's Bank issue DLC verbiage, which the seller's Bank reviews and approves. The seller will send the "Product Test" within 5 working days after the issuance of the draft MT705. The test includes: a) Recent SGS report. b)the asset certificate. c) manufacturing brochure. Within 3 international banking days, the buyer's bank issues irrevocable, transferable SBLC/MT760 and DLC/MT700 confirmed to the seller bank (of the top 50 banks) The buyer will be invited to the port of loading for inspection during loading at the buyer's expense. Shipments will begin within 35 to 45 days of SBLC/MT760- DLC/MT700 approval by the seller's bank. All original documents will be sent to the buying bank via the selling bank via DHL. The buyer's bank makes payment to the seller's bank immediately after loading the material and an SGS report from an independent SGS appraiser is provided. In The Products, The Prices And Commissions Can Be Improved Depending On The Method Of Payment And Quantities
Copper Ores 35% Cu Sale Price X TM -LME -25% price CIF ASWP Commisions x MT - 3% Procedures The buyer issues a letter of Intent (LOI) or an irrevocable corporate purchase order (ICPO). Seller issue a complete Corporate Offer(FCO). Buyer signs and stamps FCO page and returns to the seller. The seller issues a draft of the sale agreement (SPA) that will incorporate the terms and full conditions. Buyers signs and stamp Each SPA page and return it to the seller. The seller completes the SPA, signs and stamps it and issues a PROFORMA INVOICE. Buyer's Bank issue DLC verbiage, which the seller's Bank reviews and approves. The seller will send the "Product Test" within 5 working days after the issuance of the draft MT705. The test includes: a) Recent SGS report. b)the asset certificate. c) manufacturing brochure. Within 3 international banking days, the buyer's bank issues irrevocable, transferable SBLC/MT760 and DLC/MT700 confirmed to the seller bank (of the top 50 banks) The buyer will be invited to the port of loading for inspection during loading at the buyer's expense. Shipments will begin within 35 to 45 days of SBLC/MT760- DLC/MT700 approval by the seller's bank. All original documents will be sent to the buying bank via the selling bank via DHL. The buyer's bank makes payment to the seller's bank immediately after loading the material and an SGS report from an independent SGS appraiser is provided. In The Products, The Prices And Commissions Can Be Improved Depending On The Method Of Payment And Quantities
Iron Ore ORIGIN PERU 62% $90,00 USD $122 USD ORIGIN CHILE 62% $95000 USD $125 USD COMMISSIONS X MT $2,50 USD $2,50 USD CIF PRICES ASWP Procedures The buyer issues a letter of Intent (LOI) or an irrevocable corporate purchase order (ICPO). Seller issue a complete Corporate Offer(FCO). Buyer signs and stamps FCO page and returns to the seller. The seller issues a draft of the sale agreement (SPA) that will incorporate the terms and full conditions. Buyers signs and stamp Each SPA page and return it to the seller. The seller completes the SPA, signs and stamps it and issues a PROFORMA INVOICE. Buyer's Bank issue DLC verbiage, which the seller's Bank reviews and approves. The seller will send the "Product Test" within 5 working days after the issuance of the draft MT705. The test includes: a) Recent SGS report. b)the asset certificate. c) manufacturing brochure. Within 3 international banking days, the buyer's bank issues irrevocable, transferable SBLC/MT760 and DLC/MT700 confirmed to the seller bank (of the top 50 banks) The buyer will be invited to the port of loading for inspection during loading at the buyer's expense. Shipments will begin within 35 to 45 days of SBLC/MT760- DLC/MT700 approval by the seller's bank. All original documents will be sent to the buying bank via the selling bank via DHL. The buyer's bank makes payment to the seller's bank immediately after loading the material and an SGS report from an independent SGS appraiser is provided.
Soybean GMO/NON- GMO Product MT per year NON GMO Soybean 490- 100,000 1,200,000 NON GMO Soybean 475- 600,000 2,400,000 NONGMO Soybean 465- 600.000 2,400,000 Product Soybean Meal 45% 470 200,000 2,400,000 Product GMO Soybean Grade2 490 25,000 300,000 GMO Soybean Grade2 485 100,000 1200,000 Commissions x MT $3,00 USD Procedures The buyer issues a letter of Intent (LOI) or an irrevocable corporate purchase order (ICPO). Seller issue a complete Corporate Offer(FCO). Buyer signs and stamps FCO page and returns to the seller. The seller issues a draft of the sale agreement (SPA) that will incorporate the terms and full conditions. Buyers signs and stamp Each SPA page and return it to the seller. The seller completes the SPA, signs and stamps it and issues a PROFORMA INVOICE. Buyer's Bank issue DLC verbiage, which the seller's Bank reviews and approves. The seller will send the "Product Test" within 5 working days after the issuance of the draft MT705. The test includes: a) Recent SGS report. b)the asset certificate. c) manufacturing brochure. Within 3 international banking days, the buyer's bank issues irrevocable, transferable SBLC/MT760 and DLC/MT700 confirmed to the seller bank (of the top 50 banks) The buyer will be invited to the port of loading for inspection during loading at the buyer's expense. Shipments will begin within 35 to 45 days of SBLC/MT760- DLC/MT700 approval by the seller's bank. All original documents will be sent to the buying bank via the selling bank via DHL. The buyer's bank makes payment to the seller's bank immediately after loading the material and an SGS report from an independent SGS appraiser is provided. In The Products, The Prices And Commissions Can Be Improved Depending On The Method Of Payment And Quantities
Product Price Spot Price USD CIFx12 Month MT per Month Total TM per Year Sugar Icumsa 600/1200 410 384 800,000 9,600,000 Sugar Icumsa 600/1201 410 384 600,000 7,200,000 Sugar Icumsa 600/1202 410 384 260,000 3,120,000 Sugar Icumsa 600/1203 415 385 1200,000 14,400,000 Sugar Icumsa 600/1204 420 390 500,000 6,000,000 Sugar Icumsa 600/1205 460 417 200,000 2,400,000 Sugar Icumsa 600/1206 460 417 100,000 1,200,000 Sugar Icumsa 600/12007 560 462 60,000 720,000 Sugar Icumsa 600/1208 560 462 50,000 600,000 Sugar Icumsa 600/1209 600 470 250,000 300,000 Commission x MT $3,00 USD Procedures The buyer issues a letter of Intent (LOI) or an irrevocable corporate purchase order (ICPO). Seller issue a complete Corporate Offer(FCO). Buyer signs and stamps FCO page and returns to the seller. The seller issues a draft of the sale agreement (SPA) that will incorporate the terms and full conditions. Buyers signs and stamp Each SPA page and return it to the seller. The seller completes the SPA, signs and stamps it and issues a PROFORMA INVOICE. Buyer's Bank issue DLC verbiage, which the seller's Bank reviews and approves. The seller will send the "Product Test" within 5 working days after the issuance of the draft MT705. The test includes: a) Recent SGS report. b)the asset certificate. c) manufacturing brochure. Within 3 international banking days, the buyer's bank issues irrevocable, transferable SBLC/MT760 and DLC/MT700 confirmed to the seller bank (of the top 50 banks) The buyer will be invited to the port of loading for inspection during loading at the buyer's expense. Shipments will begin within 35 to 45 days of SBLC/MT760- DLC/MT700 approval by the seller's bank. All original documents will be sent to the buying bank via the selling bank via DHL. The buyer's bank makes payment to the seller's bank immediately after loading the material and an SGS report from an independent SGS appraiser is provided. In The Products, The Prices And Commissions Can Be Improved Depending On The Method Of Payment And Quantities
