Compacting Factor Apparatus Product Code Product Description PRS-B0580 Compacting Factor Apparatus STANDARDS : BS 1881-103, 5075 The PRS-B0580 Compacting Factor Apparatus is used to determine the compaction factor of concrete with low, medium and high workability. Comprising two conical hoppers having a hinged trap door attached to the lower end of each hopper, allowing the concrete sample to flow freely into the cylindrical mould. The hoppers and the mould are mounted onto a rigid steel frame and are easily removable for cleaning. Dimensions 300x400x1300 mm Weight (approx.) 41 kg
Product Code Product Description PRS-AS0140/A Bitumen Oven for Rolling Thin-Film Oven Test (RTFOT), ASTM 220-240 V 50-60 Hz PRS-AS0140/E Bitumen Oven for Rolling Thin-Film Oven Test (RTFOT), EN 220-240 V 50-60 Hz PRS-AS0142 Spare Glass Container for PRS-AS0140 PRSGE-AS3572 Air-Drying Unit for PRS-AS0140 STANDARDS : EN 12607-1; ASTM D2872; AASHTO T240 PRS-AS0140 Bitumen Oven is used for determination of the resistance to hardening of semisolid asphaltic materials/ bitumen or bituminous binders under the combined effects of heat and air with the rolling thin-film oven test (RTFOT) method. The Internal chamber of PRS-AS0140 Bitumen Oven is manufactured from stainless steel, insulated with fiberglass or similar, the door has a symmetrically located window. The oven has a programmable temperature controller which works in PID mode and digital display system. A temperature sensor is used instead of the ASTM 13C thermometer. The temperature can be read from the digital unit placed on the oven. Over tempereture controlled by a mechanic switch. Conforming to the CE Directives. Air Compressor and Air-Drying Unit (PRSGE-AS3572) should be ordered separately. Maximum pressure should not exceed 2 bar when an air compressor is used. The Bitumen Oven for RTFOT is supplied complete with; â?¢ Glass Comtainers, 8 pcs. Dimensions 800x700x750 mm Weight (approx.) 62 kg
Product Code Product Description PRS-CM6700 250 kN Cement Compression Frame PRS-CM6710 15/250 kN Cement Flexure/Compression Frame STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349;BS 3892-1, 4551-1 The PRS-CM6700 and PRS-CM6710 , very rigid two column frames have been designed for compression and/or flexure testing of mortar prisms and cubes specimens. Load cells are used on both frames to provide high accuracy in load measuring. Both frames are fitted with round platens with 165 mm diameter and these should be used together with suitable flexure and compression devices. Distance pieces and transparent front-rear safety doors (should be factory insttalled ) should be ordered separately. Distance Pieces for Frame Due to the modular design of the frames any sample with suitable size, load and pace rate can be test on both chambers by decreasing the distance between platens. Distance Pieces PRS-CM4630 Distance piece dia. 165 mm x 15 mm PRS-CM4631 Distance piece dia. 165 mm x 30 mm PRS-CM4633 Distance piece dia. 165 mm x 50 mm PRS-CM4634 Distance piece dia. 165 mm x 90 mm Platens PRS-CM0116 Upper Loading Platen with Ball Seating Assembly �:165 mm and Lower Loading Platen, �:165 mm Manufactured from high quality steel are hardened (more than HRC 53), smoothed and finished. The roughness value for the surface texture of machine and auxiliary platens are 3.2 μm. Loading Cylinder Assembly & Limit Switch All frames have a single acting up stroking ram. The diameter of piston changes with regard to the capacity. The maximum ram stroke is 50 mm, a limit switch is fitted to prevent over travel of the ram which cuts the power to the pump. There is a low friction coaxial PTFE seal between the cylinder and the piston fitted to the cylinder. Accessories PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms, ASTM PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN PRS-CM0121/A Compression Jig Assembly to test 50 mm (2�) mortar cubes, ASTM PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN
Product Code Product Description PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz PRS-CM0116 Upper Loading Platen with Ball Seating Assembly 165 mm and Lower Loading Platen, 165 mm PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN PRS-CM0121/A Compression Jig Assembly to test 50 mm (2â??) mortar cubes, ASTM PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1 The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator. Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately. The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are; Setting test parameters, including pace rate (only required when the specimen type is changed.) Choosing the compression or flexure frame by using the changeover valve. Pressing the START button on the control unit. The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure. Automatically saves the test parameters and test results. The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, an automatic hydraulic power pack with data acquisition and control system
Automatic Cement Compression & Flexure Testing Machines Product Code Product Description PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz PRS-CM0116 Upper Loading Platen with Ball Seating Assembly :165 mm and Lower Loading Platen,:165 mm PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN PRS-CM0121/A Compression Jig Assembly to test 50 mm (2) mortar cubes, ASTM PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1 The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator. Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately. The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are; â?¢ Setting test parameters, including pace rate (only required when the specimen type is changed.) Choosing the compression or flexure frame by using the changeover valve. Pressing the START button on the control unit. The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure. Automatically saves the test parameters and test results. The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, automatic hydraulic power pack with data acquisition and control system
MasterLine 8 is a high-quality window system that links countless design options to best-in-class performance and unrivaled production speed. This next generation of aluminum windows is available in three insulation levels to match any project demands.
Aluminum panel ceiling, suspended ceiling, metal suspended ceiling, expanded mesh metal suspended ceiling, PVC plastic suspended ceiling plate, clip-inceiling system, baffle suspended ceiling, open cell suspended ceiling.
Welded panel, chainlink fence, safety panel, temporary fence, barbed wire, razor wire, high security, anti climb fence, construction security panels.
Wooden and metal feet chairs, wooden nesting table, raw wood dinin table, wooden desks, wooden picnic table chair set, wooden stool, kitchen table chair sets, wooden chair frame, raw unpolished wood chair, cafe and restaurant chairs, cafe and restaurant table and chair set, wooden bar chairs, cafe and restaurant chairs, cafe and restaurant table and chair set, wooden bar chairs, raw unpolished wooden TV unit, raw unpolished wooden console, raw unpolished wooden bedside table, tea set sofa set, bride groom wedding table chair set, hotel chairs, conference room chairs, metal pedestal nesting table, raw wood nesting table, log nesting coffee table, wooden center table, metal leg center table, raw unpolished wood coffee table, wooden folding chair, cafe and restaurant seats, wooden bar chairs, raw unpolished wood cnc mirror frames, raw unpolished wood CNC headboards, raw unpolished wood CNC separator, raw unpolished wood lathe products, raw wood lathe feet, Bedroom sets, dining room sets, .
Pedestrian" and "vehicle" passage control systems in following type of products, waist & full height turnstiles, speed gates, optical turnstile, disabled passage turnstiles, stadium solutions integrated turnstiles, prestigious passage turnstiles and doors for business center and plazas, custom designed turnstiles and passage control systems, "road blocker" barrier systems, "bollard" barrier systems.
Electrical materials (mcb, fuses, cables, panels, pv modules, transformers, etc..) and mechanical materials (hvac, ac, fire systems, plumbing materials, etc..), machines (packaging machines, vehicles, injection machines, etc..) and all materials what came into your mind....Procrument, transportation and shipping
H: 45 mm/ 90 mm / 110 mm Main wire diameter: 2,5 mm / 2,8 mm
Negotiable sizes are available.
All size types are needed to be evaluated by the production and quality teams.
50 mm aperture 3 mm/4mm diameter L is max 15 m H is max 2,5 m Other sizes are negotiable.
We are the producer of wire and fence systems in .Our main products are; anti vandalism, concrete pole, steel net, wrought iron, galvanized pedestrian railing, astroturf field, j 9, razor wire, cage wire, panel fence, pvc cage wire, rail doors and personnel door, pedestrian railing, high security fence applications.
The Schuco CT 70 system is based on a 70 mm installation depth and 5-chamber technology. PVC - the most widely used material for windows in Europe - is often at the top of the window selection list due to its impressive price-performance ratio and thermal insulation properties. Schuco CT 70 - the versatile window system With their high thermal insulation and versatile accessories, Schuco CT 70 series windows and doors feature a timeless design, narrow front view and effective sound protection.
Home& office furniture, ceramic tiles, 3d wall panels, doors.
Fire extinguishers, fire cabinets, fire doors, sprinklers, water extinguishing systems, industrial gases, gas cylinders, battery vehicles, megc, cng..
