Petrol, copper wire scrap, copper cathode, minerals, coal, cement, rebar.Import, export
Colour of the solution: 45 icumsa units max Radiation: within internationally accepted limits Moisture content: 0.06% max Invert sugar content: 0.04% max Conductivity ash: 0.04% max Sulphur dioxide: 15 mg/kg max Anti-caking agents: maximum level of 1.5 m/m singly or combination of following agents: -calcium phosphate, tribasic - magnesium carbonate - silicon dioxide, amorphous (dehydrated silica gel) - calcium silicate - magnesium trisilicate - sodium aluminosilicate - calcium aluminosilicate Polarization: 99.7% min Moisture content: 0.06% max Invert sugar content: 0.04% max Conductivity ash: 0.04% max Total bacteria: 60 max E. Coli: 30 max Mould: 25 max Sulphur dioxide (sosub2): 15 max Arsenic (as): 0.5 max Lead (pb): 0.5 max
We could offer Monthly bulk Quantities of Paper both scrap in bales & non scrap as below: OCC Waste Paper OINP waste paper OMG Waste Paper ONP Waste Paper The Materials we can supply: ONP OINP Magazine Cardboard waste paper OCC Sorted Office Paper Waste Yellow Pages Telephone directories Waste newsprint paper Mixed Paper We are sourcing and engaged in distribution of premium quality products both home and abroad. We delight ourselves in Efficient, Reliable and Prompt export and delivery services to all Buyers. Our greatest dream is to expand our market worldwide and because of that,we work day and night in order to provide our clients with the best which is our number one priority.
Moisture and Impurities: 9G/100g/0,00-0,02 Acid Index 12-0,18 ACIDITY (Oleic %) : 0,06-0.09 Soap( PPM) 0-20 Saponification: Number 188-192 Color: Lovibond 0,6-2,OR/07-12Y Iodine Index: 110-143 Refraction Index: 1.479-1.4740 Peroxide: 2-7McqD2/Kg Density: 25oC/4°C 0913-0919 Cold Test: 24Hrs@O*4Moisture and Impurities: 9G/100g/0,00-0,02 Acid Index 12-0,18 ACIDITY (Oleic %) : 0,06-0.09 Soap( PPM) 0-20 Saponification: Number 188-192 Color: Lovibond 0,6-2,OR/07-12Y Iodine Index: 110-143 Refraction Index: 1.479-1.4740 Peroxide: 2-7McqD2/Kg Density: 25oC/4°C 0913-0919 Cold Test: 24Hrs@O*4
Specifications: - Feather off - well cleaned and fresh - no bruises - no black pads or ammonia burns - no bad smells - no excessive blood or blood stains - moisture content is less than 3% weight and packaging: whole chicken each weight 800g to 2500g x 7-10 in a box 5Kg LDPE poly bags in 20Kg Strong Cartoon box with 4 straps outsideOther parts from 2kg up to 10 - 15/20kg Customised packaging of all other sizes are offered, and we also provide labels for buyers.
Aluminium Profiles, Supply Materials Used In Construction, From Aac (autoclaved Aereted Concrete), Plaster, Cement, Concrete Board, Insulation Materials, Construction Chemicals, Nails, Metal, Iron, Steel, Fence And Balcony Systems, Ceramics, Fire Doors And Steel Doors, Marble, Granite, Ceramic .
Aluminium ingot, billet, casting and special mould, industry specific ceramic products, cordierite, cordierite mullite refractory ceramic, boron, boric acid and derivates.
Product Code Product Description PRS-A0810 Accelerated Polishing Machine (PSV),220-240 V 50-60 Hz PRS-A0812 Corn Emery 5 kg, for PRS-A0810 PRS-A0813 Flour Emery 5 kg, for PRS-A0810 PRS-A0814 Control Stone 50 kg Ungraded, for PRS-A0810, PSV value in the range 50 to 60 PRS-A0815 Friction Tester Reference Stone (Criggion Stone) 25 kg Ungraded, for PRS-A0810, PSV value in the range 60 to 65 Accelerated Polishing Machine (PSV) is used to accelerate the polishing action of vehicle tyres on a road surface, the resultsare used to develop safer road surfaces. The machine consists of a road wheel rotating at 320 ± 5 r.p.m, driven by a fan cooled electric motor. Abrasive Corn Emery is fed to the point of contact of the wheel on the test surface for 3 hours, followed by feeding Emery Flour to polish the surface being tested for a further 3 hours. Subsequent skid tests are carried out on the test samples using suitable portable skid test equipment. PRS-A0814 Control Stone and PRS-A0815 Friction Tester Reference Stone should be ordered separately. The Accelerated Polishing Machine is supplied complete with; � Road Wheel, � Side Plate, � Rubber Rings, � Solid Rubber- Tired Wheel - 2 units, � Drive Belt, � Abrasive Feed Mechanism, � Corn Emery - 5 kg, � Flour Emery - 5 kg, � Tool Kit, � Specimen Moulds - 2 pcs, � 2 Mould Plates Road Wheel Speed 315 to 325 r.p.m Dimensions 740x720x1520 mm Weight (approx.) 175 kg Power 850 W
Automatic Grinding Machine Product Code Product Description PRS-1040 Automatic Grinding Machine, 220-240 V 50-60 Hz PRS-1042 Grinding Wheel PRS-1035 and PRS-1040 PRS-1043 Cradle for Ã?:38-100 mm Cylindrical Specimens PRS-1044 Water Restraint Panel Set PRS-1048 Water Restraint Panel for dia 160mm Cylinder Specimen
Product Code Product Description PRS-B1050 Melting Pot 3 lt. Capacity, 220-240 V 50-60 Hz PRS-B1050/110 Melting Pot 3 lt. Capacity, 110 V 60 Hz The PRS-B1050 melting pot is used for melting the capping compound. The apparatus consists of a 3 litre capacity aluminium container in a well-lagged steel jacket, cover and thermostatic control heating system to keep the temperature constant in the range of ambient to 200 ºC. Dimensions 350x320x290 mm Weight (approx.) 9 kg Power 600 W
Product Code Product Description PRS-KA0300 Laboratory Core Trimmer and Cut-Off Machine, 230 V, 50 Hz, 1 ph PRS-KA0302 Cooling Recirculating Pump with Reservoir, 230 V, 50 Hz, 1 ph PRS-KA0304 Diamond Cutting Blade, Ã? 230x2.5 mm thickness PRS-KA0306 Double-Faced Cup Wheel, Ã? 200x16 mm STANDARDS : ASTM D4543 The PRS-KA0300 Laboratory Core Trimmer and Cut-Off Machine is used for obtaining rock samples perfectly machined (cubes, prisms, etc.) from irregular rock or core pieces. The PRS-KA0300 is supplied complete with a vice to hold irregular pieces firmly in place up to 70x140 mm approx. A second V shaped vice is used to cut cores to a maximum size 75 mm dia. x 140 mm height. Longer cores can be obtained by turning the samples upside down in the vice. It is supplied complete with a cooling water inlet. The PRS-KA0304 Diamond Cutting Blade has a diameter of 230 mm, 2.5 mm thickness and the maximum cutting area is 110x70 mm. The speed of the blade is 3000 rpm. The PRS-KA0306 Double-Faced Cup Wheel has a diameter of 200 mm and 16 mm thickness. It is used for finishing the sample ends parallel and at right angles to the axis. The PRS-KA0306 Double-Faced Cup Wheel, PRS-KA0304 Cutting Blade and PRS-KA0302 Cooling Recirculating Pump with Reservoir should be ordered separately. PRS-KA0300 and PRS-KA0302 for 60 Hz with 220 V or 100 V can be supplied. Dimensions 730x1050x590 mm Weigth (approx.) 100 kg Power 1100 W
Product Code Product Description PRS-1035 Semi-Automatic Grinding Machine, 220-240 V 50-60 Hz PRS-1042 Grinding Wheel for PRS-1035 and PRS-1040 PRS-1043 Cradle for Ã?:38-100 mm Cylindrical Specimens PRS-1044 Water Restraint Panel Set PRS-1048 Water Restraint Panel for Ã?160mm Cylinder Specimen The PRS-1035 Semi-Automatic Grinding Machine provides fast grinding of cylinder specimen ends to obtain plane and parallel surfaces according to EN and ASTM standards. The ony differance between automatic machine and semi-automatic machie is that the cradle of the semi-automatic machine is moved toward the grinding wheel by user. All grinding process is automatic except the movement of the cradle for semi-automatic machine. The optimum cycle to be applied by user is 5-6 cycle/per minute. The machine is manufactured from stainless steel for resistance to corrosion. The water restraint panels should be ordered seperately for cubic specimens or different sized cylindrical specimens. The Semi-Automatic Grinding Machine is supplied complete with; The preparation of concrete cylinder test specimen for compressive strength test EN 12390-1, 12390-3 ASTM C31, C39, C192, C617 The maximum tolerance on the flatness of the potential load bearing surfaces (the ends of compression test specimens) is 0.002 in. [0.050 mm] The preparation of drilled concrete cores specimen for compressive strength test EN 12504-1, 12390-1, 12390-3 ASTM C42, C397 The deviation of perpendicularity of the side, with reference to O the end faces is 0,5O â?¢ Grinding Wheel for concrete specimens â?¢ Cradle for Ã?:38mm to100 mm cylindrical specimens â?¢ Water restraint panel set f (Consist of four panels Ã?150, 100, 75 and 50 mm) Dimensions 730x1200x1500 mm Weight (approx.) 280 kg Power 1850 W
Melting Pot Product Code Product Description PRS-B1050 Melting Pot 3 lt. Capacity, 220-240 V 50-60 Hz PRS-B1050/110 Melting Pot 3 lt. Capacity, 110 V 60 Hz STANDARDS : EN 12390â??3, 12390-1, 12504-1; ASTM C31, C192, C617, C39, C42; AASTHO T23, T126 The PRS-B1050 melting pot is used for melting the capping compound. The apparatus consists of a 3 litre capacity aluminium container in a well-lagged steel jacket, cover and thermostatic control heating system to keep the temperature constant in the range of ambient to 200 ºC. Dimensions 350x320x290 mm Weight (approx.) 9 kg Power 600 W
Marshall Stability Test Machine with Digital Readout Product Code Product Description PRS-AS0055 Marshall Stability Test Machine with Digital Readout Unit, 50 kN, 220-240 V 50-60 Hz PRS-AS0055/110 Marshall Stability Test Machinewith Digital Readout Unit, 50 kN, 110 V 60 Hz PRS-AS0057 Breaking Head (Stability Mould) 4â?� PRS-AS0058 Breaking Head (Stability Mould) 6â?� PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058 PRS-AS0063 Indirect Tensile Test Jig for Compacted Bituminous Samples 100 mm (4â?�) & 150 mm (6â?�) Dia. STANDARDS : EN 12697-34, 12697-23, 12697-12 (Method A); ASTM D1559, D5581, D 6927; AASHTO T245 The PRS-AS0055 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures. The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounted compression frame with motor and worm gear housed within the base unit. The mechanical jack raises the lower platen at a constant speed of 50.8 mm/min as required in the relevant standard. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine. The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values, the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head and two digital readout units (one for load and another for displacement) The PRS-AS0056 Automatic Marshall Stability Machine is also suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581. The machine can be hand operated by a lateral hand wheel for calibration purposes; the hand wheel is supplied complete with the machine. Platen Speed 50,8 mm/min Capacity 50 kN The PRS-AS0055 Marshall Stability Test Machine is supplied complete with; â?¢ Load Cell, 50 kN â?¢ Linear Potentiometric Displacement Transduce with Bracket, 25x0.001 mm â?¢ Hand Wheel for Manual Control â?¢ Breaking Head, 4â?� Dimensions 550x700x1200 mm Weight (approx.) 102 kg Power 1100 W
Product Code Product Description PRS-B0750 Concrete Mixer Pan Type, 100 L, 220-240 V 50-60 Hz The efficient mixing of concrete is essential if quality specimens are to be manufactured.The Pan Type Concrete Mixers is designed to give efficient mixing of both dry and wet materials. The mixing pan is removable and tilts for easy access to the pan and emptying on completion of the mixing operation. The total volume of the pan is 100 liters but the effective capacity of the mixer is 56 liters. The mixer head lifts clear to provide maximum access to the pan and holds the mixing blades at a constant depth during the mixing operation. The blades can be adjusted to suit the different types and volume of materials to be mixed. The pan type mixer is also equipped with rubber wheels which provide high portability. All parts of the IP55 protected mixer are noncorrosive painted and galvanized. Product Code PRS-B0750 Dimensions 950x1050x1250 mm Weight (approx.) 255 kg Power 1500 W
Product Code Product Description PRS-A0800 Aggregate Abrasion Value (AAV)Machine,220-240 V 50-60 Hz PRS-A0802 Graded (Abrasion) Sand 25 kg x 2 packs for PRS-A0800 STANDARDS : The Abrasion Machine is used to determine the Aggregate Abrasion Value (AAV) by testing the measure of the resistance of aggregates to surface wear by abrasion. The Abrasion Machine consists of a flat circular cast iron grinding lap wheel of 600 mm dia. which rotates in a horizontal plane at a speed of 28-31 r.p.m. The abrasion sand is fed across the surface of the specimen samples through a special funnel. Graded sand should be ordered separately. The Aggregate Abrasion Value (AAV) Machine is supplied complete with; â?¢ Specimen Moulds, 2 units â?¢ Trays, 2 units â?¢ Flat Plates, 2 units â?¢ Weights â?¢ Clamps Dimensions 800x700x1100 mm Weight (approx.) 200 kg Power 370 W
Product Code Product Description PRS-ZE0180 Semi-Automatic Penetrometer for Liquid Limit, 220-240 V 50-60 Hz PRS-ZE0180/110 Semi-Automatic Penetrometer for Liquid Limit,110 V 60 Hz PRS-ZE0182 Liquid Limit Penetration Test Cone 30° Angle,Stainless Steel PRS-ZE0183 Cone Test Gauge for PRS-ZE0182 PRS-ZE0184 Liquid Limit Penetration Test Cone 60° Angle,Stainless Steel PRS-ZE0185 Cone Test Gauge for PRS-ZE0184 PRSGH-1425 Moisture Content Tin with Lid �:55 mm x h:35 mm, Aluminum PRSGH-1435 Moisture Content Tin with Lid 75 mm x h:50 mm, Aluminum A Cone Penetrometer is used to determine the moisture content at which clay soils pass from a plastic to a liquid state, and used also for the determination of undrained shear strength. The PRS-ZE0180 Semi-Automatic Penetrometer for Liquid Limit consists of a cast iron base with course and fine leveling screws, a digital penetration measurement gauge 0.01 mm resolution/readibility and an automatic penetration timer unit. The PRS-ZE0180 is equipped with a digital, 99 second timer, which can be set to the standard 5 second free-fall time or to some other setting for customized tests. When engaged the timer will allow the needle to free fall into the sample for the specific time interval and then lock the needle from advancing while providing a direct reading of the test results. 320 g weight should be added to the 30° angle cone to get a total weight of 400 g for the shear strength test. Semi-Automatic Penetrometer for Liquid Limit supplied complete with; � Automatic Penetration Timer Unit, � 30° Penetration Cone � Sample Cups, 3 pcs. Aluminium, �55 mm x h:35 mm.
Product Code Product Description PRS-A0500/E Sand Equivalent Test Set, EN Model PRS-A0500/A Sand Equivalent Test Set, ASTM Model PRS-A0502/E Sand Equivalent Measuring Two Graduated Cylinder, EN PRS-A0502/A Sand Equivalent Measuring Graduated Cylinder, ASTM PRSGH-1425 Moisture Content TinSand Equivalent Measuring Tin with Lid, Aluminium, Ã?:55 mm x h:35 mm PRS-A0506 Sand Equivalent Siphon Assembly PRS-A0507/E Sand Equivalent Test Plunger Assembly,EN PRS-A0507/A Sand Equivalent Weighted Foot Assembly,ASTM PRS-A0515 Washing and Flocculating Solution (Stock Solution), 1 lt The Sand Equivalent test set is used to determine the fines of aggregates. The test set is supplied with 4 transparent acrylic plastic measuring cylinders, siphon assembly (irrigator tube with valve, solid rubber stopper, siphon tube and hose, blow tube) 5 lt. plastic can, weighted foot assembly, measuring can, wide-mouth funnel, and ruler. PRS-A0515 Washing and Flocculating (Stock Solution) should be ordered seperately. The Sand Equivalent Test Set is supplied complete with; â?¢ Transparent Graduated Acrylic Plastic Measuring Cylinder, 4 units for PRS-A0500/A, â?¢ Transparent Acrylic Plastic Measuring Cylinder - 4 units for PRS-A0500/E, â?¢ Siphon Assembly (irrigator tube with valve, solid rubber stopper, siphon tube and hose, blow tube, â?¢ Plastic can - 5 lt. â?¢ Weighted Foot Assembly, â?¢ Measuring Tin, â?¢ Wide-Mouth Funnel, â?¢ Ruler, â?¢ Special Carrying Case, Dimensions 400x550x150 mm Weight (approx.) 4,6 kg
Product Code Product Description PRS-AS0056 Automatic Marshall Stability Test Machine, 50 kN, 220-240 V 50-60 Hz PRS-AS0056/110 Automatic Marshall Stability Test Machine, 50 kN, 110 V 60 Hz PRS-AS0057 Breaking Head (Stability Mould) 4â?� PRS-AS0058 Breaking Head (Stability Mould) 6â?� PRS-AS0060 Linear Potentiometric Displacement Transducer, 25x0.001 mm with bracket for PRS-AS0057 and PRS-AS0058 PRS-AS0063 Indirect Tensile Splitting Device for Compacted Bituminous Samples 100 mm (4â?�) Dia. STANDARDS : EN 12697-34, 12697-23, 12967-12 (Method A and Method B up to 51 mm/min); ASTM D1559, D5581, D 6927; AASHTO T245 The PRS-AS0056 50 kN Capacity Automatic Marshall Stability Test Machine is used to determine the maximum load and flow values of bituminous mixtures. The machine comprises of a robust and compact two column frame with adjustable upper cross beam. The unit is a bench mounting compression frame with motor and worm gear housed within the base unit. The speed of the lower platen can be adjusted between 6 mm/min to 60 mm/min using the Data Acquisition and Control Unit. For safety, the up and down travel of the lower platen is limited the use of limit switches. Rapid adjustment of the platen is controlled using the up and down buttons on the front panel of the machine. The machine can be hand operated by a lateral hand wheel for calibration purposes. The measuring system consists of a 50 kN capacity strain gauge load cell fitted to the upper cross beam to read stability values and the 25 x 0.001 mm linear potentiometric displacement transducer fitted to the Breaking Head. The PRS-AS0056 Automatic Marshall Stability Machine is suitable for testing 6â?� dia. specimens (152.4 mm) conforming to ASTM D5581.
ConceptSystem 77 is a versatile window system that complements almost any building project thanks to its many design options. Compatible with different burglar resistance levels, the aluminium windows offers both a safe and stylish solution.